Right field to title

Similar Questions

• Two monitors: right of the title bar part cannot be moved

  Hi Ho

  When I use two monitors in landscape mode (monitor extends the desktop of the screen from left to right), a part of the title bar of the program and windows Explorer is not responding. This does not happen when I use a single monitor. Since I use windows explore pillar-shaped, it is quite annoying, because I need to aim the small area that is still sensitive to drag a window exactly.

  The area on which is the upper right, just next door to reduce, enlarge, close buttons. Note that the thin strip under these buttons is responive above the entire title bar. Here is a picture of clarification:

  http://S27.postimg.org/kvhswknoz/windows_title_bar.jpg

  I've marked the sensitive area with the blue wire, the area on which the red. My windows are much thinner. The area on which remains the same size, regardless of the width of the window.

  I use Windows 7 pro, with almost the latest updates.  My left monitor is plugged as number 2, but is set as the main monitor. This is why the task bar on the left monitor.

  OK, I found the culprit.

  Is AMD Hydravision (the title of the Startup items) that is causing the problem. But I had to disable the Catalsyst control center as well, because this would reactivate Hydravision automatically during startup.

  Thank you, Sandy, for your help.

  To resolve the problem, run msconfig, activate the Startup tab and disable the AMD Hydravision and Catalyst Control Center.

• Right fields aligned/Justified number in table form

  Hi all

  I use APEX 4.2 and was fiddling with the display of numbers right.

  I tried to adjust 'Alignment of the column' right and and "CSS Style" to "'text-align: right ' and 'Attributes of the element' align = 'right' but it doesn't cut it."

  Any ideas?

  Thank you

  RooBie,

  tabualr form field which is to align the right to change

  goto > column attribute > attribute of the element >place style = "" text-align: right " "

  you will get the allignment of the column to the right

  I hope this helps.

  Regerds,

  Leave.

• When comparing the fields status, title or banner buried on the body of the screen?

  When you have a screen and you have the added fields to the body as well as the status bar, I wonder when that gets buried on? What is the sequence of events?

  During the positioning of the body.

• top title bar controls right does not

  Using the version 10.0.1 with Win XP SP3 5.1. Firefox opens and seems to work fine, but the controls at the top right of the title bar do nothing. If I open the Windows Task Manager they then start to work and continue to work even after I closed the Task Manager. The solution to use the Task Manager to make Firefox work is boring.

  Is the hotkey working Ctrl-Shift-W to close the window? If this isn't the case, I think that the problem is with the operating system.
  Shortcuts for maximize and minimize are listed here:

  • http://www.LyteByte.com/2008/01/31/how-to-minimize-and-maximize-Windows-using-keyboard-shortcuts-in-XP-and-Vista/

• Title field locked

  I'm under DW CS3 on XP. I frequently use other Adobe products, but only occasionally brought to use Dreamweaver, so I have a way to go before I feel competent with it. I don't know I'm doing something simple incorrectly. Please help me.
  
  I create a HTML page and set up the page layout so it seems I want, then I save the page as a template. But when I create pages from this model, the small field of title at the top of the window is locked. Whatever text was there when I recorded the original model is blocked and I can't change it. How can I save a model and keep the editable title field? Thanks for the tips.

  It is the sign of a bad model.

  This do-

  Create a new page (basic HTML).
  Use the FILE | Save as template...
  Look at the code in the head region of the page, in particular the editable
  the region around the

• can I print the JPEGs with the title in the image

  I print some *.jpg images using the photo viewer and Windows fax. I put 18 photos on each A4 sheet. Is it possible to add the title of each image in each image file for example can image_1765.jpg automatically added to the image. I have around 200 photos and would like to add the file name on each of the 200 photos automatically.

  Thank you

  Another option...

  FastStone Image Viewer freeware can add
  file names in the face of your photos in a batch.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  FastStone Image Viewer
  http://www.FastStone.org/FSViewerDetail.htm
  (Windows XP / Vista / 7)

  I suggest that you create a new folder and add
  copies of your photos for experimental purposes.
  If you are unhappy with the result your originals
  will be intact.

  After FastStone is downloaded and installed...
  Open the program and go...

  Tools / open the Batch Conversion / tab Batch convert...

  Check the box... Use of advanced options...

  Advanced Options button / tab text.
  Check the box... Add text...

  (You will need to experiment with the position and the police
  size and color to get the desired result.)
  (the text size will need to be adjusted according to the)
  the size of the photos)

  Open the window drop... "Insert a Variable."
  choose... The file name / no Extension...
  (in the white field you should see ($C2)
  Left click... Ok

  On the Batch tab convert... in the left field...
  Find and select the photos you want to
  Add.

  Left, click on the Add button to move the files to
  the right field.

  Choose an output Format...

  Choose an output folder...

  Click on the button convert...

  It's much easier to do than to explain then
  give it a try before say you "Good Grief... it's too
  a lot of work.

• right-aligned label

  How is my label isn't getting right-justified in my horizontal management?  I have two labels in the Manager, and they parameters specified to justify.  However, they just pile together.

  HorizontalFieldManager hfmTitle = new HorizontalFieldManager (Field.USE_ALL_WIDTH);
  LabelField title = new LabelField ("my title", LabelField.FIELD_LEFT);
  LabelField titleTest = new LabelField ("test", LabelField.FIELD_RIGHT);
             
  hfmTitle.add (title);
  hfmTitle.add (titleTest);
  setTitle (hfmTitle);

  HorizontalFieldManager hfmTitle = new HorizontalFieldManager (Field.USE_ALL_WIDTH);
  LabelField title = new LabelField ("my title", LabelField.FIELD_LEFT);
  LabelField titleTest = new LabelField ("test", LabelField.USE_ALL_WIDTH |) DrawStyle.RIGHT);
            
  hfmTitle.add (title);
  hfmTitle.add (titleTest);
  setTitle (hfmTitle);

• How do I see all the 'title' of a (now truncated) page?

  I see that Firefox is now truncating the 'title' of web pages. I see no good reason for this because there is empty space to the right of the title. I think that it did in the Department 'anything to make changes to Firefox', but in this case, it is not an improvement and gives less information to the user.

  How can I fix the browser so I can see once again all the 'title' as provided by the web page designer? I don't want to take additional measures (if any) to see. I want it to appear automatically every time.

  With the cursor hovering over the tab, a ToolTip should appear with the full title of the page.

• M30X-118 right alt (AltGr) problem

  I just bought a new laptop M30X-118. "We are a German company in Poland and the need to use Polish signs require ' right alt" button titled AltGr. The button is moved very on the right, close to arrows, and it is very inconvenient to use Polish writing.
  There is another button near the area, on the right side if it without any labels.
  My question is; There is no way to attribute AtlGr function of this button without a label? What is the function of this button. You can encounter the same problem with the German letters.

  Hi Mariusz,

  Perhaps this 3rd party software helps you solve the problem

  http://webpages.Charter.NET/krumsick/

  There is a tool called KeyTweak and is supported by W2k and XP.

  Rudi

• How to quickly enter titles in Photos

  Is there a way to quickly enter (or change) a series of titles in Photos? I use the latest version (1.2) with El Capitan and were not able to understand this. At the opening, it was possible to change the title of a photo in the sidebar for information and then use command-arrow to go to the next photo to enter a different title. Given that the cursor would remain in the title field, I could just start typing. In the Photos, appears not to be possible without the help of the mouse. If I'm trying to change the title in the details pane for a photo (or below the picture for the album), it requires two clicks of the mouse - one outside the field title in the first photo and another inside the field of the second photo title (after using the arrow to go to the next photo). It's slightly better for the album, because I can use the tab click outside the field of title and then use the arrow to move to the next photo, but I have yet to click in the field title to add or change. This is a major drawback, so I hope I'm just something missing. Thank you very much.

  Photos requires click compared to the opening.

  You can enter titles in the fields of text under the thumbnails, but you must click in the textfield for editing.  The same thing, if you keep the open information panel and not the pictures by using arrow keys. You must click in the textfield of the Info Panel to enter the title.

  It's a little easier, if you want to assign the same title to multiple photos. You can select all of the photos at once and enter the title for each of them in the title field in the Info Panel.

• A computer repair shop can install windows on someones computer off a 'set of generic disks' if the computer has the right to this type of windows via a PIN single/code/serialnumber?

  A few years back, I took a computer to a repair shop and had not the discs, the repair guy said that they could legally restore the computer and load it on a wide a copy of a random/generic windows (the same computer had the right of)

  is it legitimate?

  Seems like it would be, I mean if the computer has the right to this title, but I don't know if you're telling me.

  Thank you

  If the Windows license is an OEM license (ie. the computer was purchased from a company like Dell, HP, etc. with pre-installed Windows), then the license is bound to the machine.  Each manufacturer has a way to check their OEM license is valid.  One method is for the manufacturer to place a code in the BIOS of the motherboard that validates the copy of XP, when installed with a floppy disk to install from the same manufacturer.  So it should be perfectly legitimate to restore license OEM to the originating from a floppy to install OEM computer.

  HTH,
  JW

• How move the taskbar on the right side of the screen to the bottom of the screen?

  my taskbar was now at the bottom of the screen its in how come back down to the right

  * original title - was my task bar at the bottom of the screen now its right how to return to the lower part *.

  Hello

  This should help you

  http://Windows.Microsoft.com/en-us/Windows-Vista/unlock-and-move-the-taskbar

  Unlock and move the taskbar

  Once you unlock the taskbar, it is ready to move to any horizontal or vertical office edge.

  Taskbar

  Hide all

  To unlock the taskbar

  • Right click on a space empty in the taskbar. If a checkmark beside him doesn't lock the taskbar, the taskbar is locked. You can unlock it by clicking on lock the taskbar, which removes the check mark.

    

    Note

    To lock the taskbar into place, right-click an empty space in the task bar, then click on lock the taskbar, so that the box is displayed.

  To move the taskbar

  • Click on an empty space on the taskbar, and then hold down the mouse button, dragging the taskbar to one of the four sides of the office. Once the taskbar where you want, release the mouse button.

  Make sure that block you the taskbar when you have finished

  or try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Fields behind the HFM above

  Hello

  know that I had passed the 1st HFM is every time on the top of the screen, I have another problem! When I add a field to the 2nd HFM and I start this app I don't see this field, because it is behind the 1st HFM and I have to scroll over to see this. Can someone help me?

  Here is my code:

  VerticalFieldManager fieldManagerAll = new VerticalFieldManager(USE_ALL_HEIGHT | USE_ALL_WIDTH | NO_VERTICAL_SCROLL){
              protected void subpaint(Graphics graphics){
                  int height = Display.getHeight();
                  int width = Display.getWidth();
  
                  super.sublayout(width, height);
              }
          };
  
  //      VerticalFieldManager contains title
  VerticalFieldManager fieldManagerTop = new VerticalFieldManager(Field.USE_ALL_WIDTH | NO_VERTICAL_SCROLL){
  
              protected void subpaint(Graphics graphics){
                  int height = Display.getHeight() / 8;
                  int width = Display.getWidth();
  
                  super.sublayout(width, height);
              }
          };
  
  VerticalFieldManager fieldManagerMiddle = new VerticalFieldManager(USE_ALL_WIDTH | VERTICAL_SCROLL){
  
              protected void subpaint(Graphics graphics){
                  int height = (Display.getHeight() / 8) * 5;
                  int width = Display.getWidth();
  
                  super.sublayout(width, height);
              }
          };
  
  //      all fields for title
  
  //      all fields for the middle
  HorizontalFieldManager middleTop = new HorizontalFieldManager(){
  
    protected void subpaint(Graphics graphics){
      int height = (Display.getHeight());//) / 12) * 5;
      int width = Display.getWidth();
  
      super.sublayout(width, height);
              }
  };
  
  HorizontalFieldManager middleTopLeft = new HorizontalFieldManager(HorizontalFieldManager.FIELD_HCENTER){
      protected void subpaint(Graphics graphics){
          int height = (Display.getHeight() / 12) * 5;
          int width = Display.getWidth() / 2;
          super.sublayout(width, height);
          }
  };
  
  Bitmap symbol = Bitmap.getBitmapResource("ressources/100000.png");
  BitmapField symbolField = new BitmapField(symbol, Field.FOCUSABLE);
  middleTopLeft.add(symbolField);
  
  VerticalFieldManager middleTopRight = new VerticalFieldManager(){
      protected void subpaint(Graphics graphics){
          int height = (Display.getHeight() / 12) * 5;
          int width = Display.getWidth() / 2;
  
          super.sublayout(width, height);
          }
  };
  
          middleTop.add(middleTopLeft);
          middleTop.add(middleTopRight);
  
          fieldManagerMiddle.add(middleTop);
  
          fieldManagerAll.add(fieldManagerTop);
          fieldManagerAll.add(fieldManagerMiddle);
  
          add(fieldManagerAll);
  

  The additional Bitmap isn't schown on the screen, I have to scroll!

  Best regards

  Maja

  OK I solved the problem! When I don't value width and height it works!

• How to make a labelfield right aligned text

  I want to make my label text aligned to right field in then the screen

  LabelField content = new LabelField(description,LabelField.FOCUSABLE|USE_ALL_WIDTH|FIELD_RIGHT)
  

  This labelfield, I add to an optimization of internal resources

  VerticalFieldManager vfm = new VerticalFieldManager (
                  VerticalFieldManager .VERTICAL_SCROLL
                          | VerticalFieldManager .FOCUSABLE) {
              protected void sublayout(int width, int height) {
  
                  super.sublayout(Display.getWidth() - 20, height);
                  setExtent(Display.getWidth() - 20, 33);
              }
          };
  

  This optimization of internal resources, I add to main vfm called external resources management and in defining its position

  layoutChild(vfm, maxWidth, maxHeight);
                      setPositionChild(vfm,290, 123);
  

  My screen is 320 x 240

  But the text goes out of the screen. Help, please

  Forget all the positioning in the Manager and try this:

  Content LabelField = new LabelField (description, LabelField.FOCUSABLE |) DRAWSTYLE. (RIGHT);

  Announcing this to a VerticalFieldManager or directly to your screen and I think this should work for you.

  If this is not the case, let know us and we can look at the positioning of the field.

  As a side note, it seems doubtful:

  protected void sublayout (int width, int height) {}
  Super.sublayout (Display.GetWidth () - 20, height);
  setExtent (Display.getWidth () - 20: 33);
  }

  What you trying to do?  Why is the 33 important?