Ring type change Passport blackBerry

Similar Questions

• Photo ring Type Def not updated

  I have a ring of photo type def.  I used it in an another vi.  At the time, the ring of photography has only 5 photos in there.  Later, I added another image to the ring of pic type def, but not a not updated of the vi.  Why is this?

  Given a ring of photo is just another type of ring, see if these appy son message

  Ring type constant def not updated for LabVIEW 2010 SP1

  strict type of ring bat bug?

  Strict Type def with Menu ring does not automatically update the related constants

• BlackBerry App change my BlackBerry ID

  Hello

  I want to know how I can change my BlackBerry ID. If I reset my device, it will be ok? Please help me! Thank you

  Hello

  To clarify... it depends a lot on your existing device OS level... refer:

  • http://support.BlackBerry.com/kb/articleDetail?ArticleNumber=000023393

  If you are sure you know your BBID credentials (ID and password), HOWEVER so that your device operating system is the branch of 10.3.1.xxxx or earlier, then you can jump to the WIPE on the device at 100%:

  • http://support.BlackBerry.com/kb/articleDetail?articleNumber=000026694&language=English

  If you run a branch of 10.3.2.xxxx operating system, it must proceed with much attention... When you launch the WIPE, you will be prompted for the CURRENT BBID credentials that are associated with the device. You MUST enter that day in order to separate the association between your device and the current BBID, which will then allow you to create a new BBID (on the unit) when the WIPE is complete (as part of the initial Setup procedure).

  If you do not succeed, when you launch the WIPE, to enter the credentials current BBID, then WIPE will still proceed, but BBID current credentials will be accepted only after the WIPE... in this case, you will be unable to create/use a BBID different as part of the initial configuration process. It's all part of the 10.3.2 feature AnitTheft, which uses the BBID as an essential element to ensure that only the owner is legitimate (in reason to know their powers BBID) can actually use this device.

  If you're on the 10.3.2 branch of the OS and are NOT 100% sure that you know your BBID identifiers, then please double-click controlled (via PC/browser) at https://blackberryid.blackberry.com/bbid/login/. You must, if you are on 10.3.2, know your existing BBID credentials in order to separate the association between this BBID and your device.

  More information can be found here:

  • http://support.BlackBerry.com/kb/articleDetail?articleNumber=000036418&language=English

  Good luck!

• Network type changes 'Public' and does not return to work when the default gateway is detected

  Original title: Type of network not restored on ethernet cable reconnect.

  I have a Dell Precision R5500 running Windows 7 Professional Service Pack 1. It is connected to a network that is stored as a type of 'work '. When the ethernet cable is removed and replaced network type changes to 'Public' and does not return to work when the default gateway is detected. I also have a Toshiba Tecra M10 running Window 7 Professional Service Pack 1 that initially detects the network restored as 'Public', but 'Work' once again Exchange is a connection to the default gateway. Is there a setting somewhere in the strength of the network to double check its type periodically?

  Hello

  You have any other network assets wireless (specifically) running on the computer?

  Have another active network connection could also cause this.

  Allows us to follow the methods mentioned below and see if they help.

  Method 1: Run the network troubleshooter.

  When the network type gets changed to 'Public' after the cable is disconnected and reconnected. The troubleshooter should let you know if there are errors with the associated services.

  See the following article:

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  
  Method 2: check if network discovery and file sharing options are enabled in the network and sharing Center.

  See the following steps:

  a. click on start toreduce this top, type network and sharing Center in the Start Search box, and then click network and sharing Center in the programs list.

  b. If network discovery is off, click the arrow to expand the section, click turn on network discoveryand then click apply.

  Reduce this includes this imIf that you are prompted for an administrator password or for confirmation, type your password or click continue.

  c. If file sharing is off, click the arrow to expand the section, click turn on file sharingand then click apply.

  Collapse this includes this ima

  If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  
  Method 3: Uninstall the network drivers and then install the last set of drivers on the manufacturer's Web site and check the issue.

  See the following steps:

  (a) click Start, right click on computer.

  (b) click on properties, click on Device Manager

  (c) expand the network adapter, right click on the adapter option

  (d) click on uninstall

  (e) now go to your computer / site Web of the manufacturer of the device, download the updated drivers and install them.

  Reference:

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• After installing Acrobat or Reader on Windows 7 or Vista, icons of applications and file types change in Acrobat/Reader icon. Double click on a file or icon launches Acrobat or Reader. (The native application associated with the file type is not ope

  After installing Acrobat or Reader on Windows 7 or Vista, icons of applications and file types change in Acrobat/Reader icon. Double click on a file or icon launches Acrobat or Reader. (The native application associated with the file type is not open.)

  Hi peterb53490660,

  Try the steps of troubleshooting mentioned in this KB doc. https://helpx.Adobe.com/Acrobat/KB/application-file-icons-change-Acrobat.html

  Kind regards
  Nicos

• Changing Smartphone blackBerry tunes ring

  Anyone know how to change the ringtone SMS and e-mails on the flip? I change it only for phone calls. Thank you!

  Ahhhhh, I see now. I have a 8220 flip and had to click on the side menu button. This isn't on your list, so I tried Haden can't.

  Thank you!

• Ring type constant def not updated for LabVIEW 2010 SP1

  I have a problem with the update of the control ring LV 2010 SP1 constants.  If I change the values or names of elements of a ring of control that has the defined type (type def or type strict def) my constant schema do not update.  The constants are set to Auto-Update of type def and if I right click on the constant, change to a control and then back to a constant, they update very well.  And if I have a control/indicator on the comic it refreshes also very well.

  Anyone else seen this problem or can someone seeks to duplicate?

  LV 2010 SP1 bug?

  Thank you

  Dan

  It is not a bug. See here - http://digital.ni.com/public.nsf/allkb/46CC27C828DB4205862570920062C125

• Help Passport blackBerry with "EDIT FILE SETTINGS"

  Hello

  need help please with CHANGE FOLDER within EDIT the ACCOUNT SETTINGS in the E-MAIL ACCOUNTS. When I click on change folder settings, I have a radio button at the top, once slipped to the 'blue' indicating synchronize all folders of e-mail is on... what it means please? Secondlu, records under do or don't have a tick in them but I can't check or uncheck them anyway, why is this?

  many passport thanks 10.3.0.675 blackberry software

  Subfolders can be synchronized to the device when you use IMAP or EAS. Some files are not able to be sync'd and those who will be grayed out. The rest will be synchronized.

• Documents Passport blackBerry go Passport

  I want to know if passport has Blackberry to a version full of Documents to Go or not?

  It supports create new worksheet Excel in Document to Go or just change please notify

  Yes, the Passport is the full version of Docs to Go, and you can create a new Excel spreadsheets. Each device BB10 has had it.

• Passport BlackBerry navigation pane colors + dialog system

  Passport for blackberry, my theme is promising for my application...

  the navigation pane, not come out black gray/white...

  and systemdialog the blue title bar does not appear...

  Why change both in designs? and how do I make black colors (tabbedpane same question, the bar is white/grya not black)...

  Mamadou wrote:
  Yes, but I have developed my app for bright theme.
  If I move to dark theme, unfortunately all * bleep * s upwards.

  the black color for the navigation pane bar below, was also bright theme.

  You cannot change the color scheme ActionBar 10.3

  Cascades is the best to support you and convert all icons at bright onnew ActionBar work.

  If you use the icons do not follow the user interface design Guide then conversion can fail and you will need to rework

  For the title bar: If you want the blue must be created a FreeStyle title bar

  ---

  So I would really recommend to rework your app looks good on 10.3 light theme

  Overall, the bright theme (from my POV) now looks a lot better:

  before that you had: Blue TitleBar, bright ActionBar content and dark

  now, all the adjustments better together: bar title, content, ActionBar... There is no rupture 'color '.

  and if you use the SignatureAction and a custom brand color I am sure that your application will look

  For me 10.3 is something like the real 1.0 ;-)

  BTW: I wrote a series of blog articles to help get 10.3 and supporting the Passport.

• Phone number for the change of blackBerry Smartphones

  I have a Blackberry Curve 9360 and receive the unwelcome calls. How to get the number changed?

  Thank you very much.

  1. your mobile operator changes your number, it is not a function within the BlackBerry itself, other than to insert a new SIM card with new number. You begin this process with your mobile operator.

  2. you have your phone number listed on your 'My Mobile provider' or the carrier. Put your phone number on the internet on these public forums for the world to see, is not wise. To change this, at the top of this page, click my settings > personal profile > personal information and in the entrance of the block of type 'Carrier' the name of your mobile operator.

  Display your number like that on a public forum could be a source of nuisance calls.

  Good luck.

• Need help with the advanced file Type changes

  Somehow all my folders of changed files option.  Instead of the folder when you click it, it opens the search.

  I know where and what to change, just do not know how.  Under Tools > folder options > file types, I select "files" and click "Advanced".  Of course, it says 'find '.  I click on 'new' under 'action', I type 'open', but what should I put under "Application used to perform action:"?  It won't let me not leave the field empty.  When I looked to see how it was done in 'file', 'edit' is gray.  I tried to look on other computers, but everyone has Vista, Vista doesn't even have a tab "file type" under folder options and I couldn't find it anywhere else.

  Even if you don't know the answer, if you could look to see what it says on your computer and let me know.  Like I said could not find on Vista, I am running XP.

  Yes, I know that I can do a right click on the folder and open it, and that's what I do.  It really happened to be a pain in the you-know-what.

  Any help would be greatly appreciated.

  I've reposted under the topic "Pls! I just need someone to look at their own computer! »

  If you are interested in the solution is there.

• def type change is updated to all connected controls?

  Hi all

  I create one type def on a cluster in which digital, string, array, and error output will be contained. I save as type def. (*.ctl). I drag the *.ctl file to a new VI which will create a copy. Later if I change the file ctl of origin (for example to change the label of the controls inside), change will be reflected in all controls, as mentioned in the help "when you save a custom control or an indicator in a type definition, all data changes you make to the type definition affect all instances of the type definition in all the screws that use it." I wonder if this is true for all change of ownership or only for certain goods. I try, for example, to change the display format of data (e.g. scientific), change the size of controls or even replace regular inspections with silver counterpart. I found that the changes will not reflect in all instances connected.

  PS after the changes, I click on 'apply changes' and save the ctl but the same result

  This link might help. Try instead a definition of strict type.

• automatic generation of array type change

  For the different functions available on the table palette, there is an entry "table type".  If you right-click on the entry (on the diagram, of course) and choose Create-Constant, it creates an array of type Dbl 2D (at least it is the standard of the worksheet line to the array function).

  In this particular case, I want the type of a 2d channels table.  I know I could create a table front panel control, make dragging a control in the chain and connect then this control, but rather how can I change this constant to block diagram to be string 2d?  I don't see the option available in any context menu... once again, I want to do all this in the block diagram, not the front panel.

  Just enter the digital constant and pull it out of the constant matrix.

  

  

  Then replace it with a string constant.

  

  

  I normally just start with a blank matrix constant and place any type of constant, I need her to be inside

• Administrator account type changed from standard

  I have 2 on my pc to Setup user accounts - two of them have been "administrator."  They have now been changed to the standard.  That's happened?  Was it a Vista update that made that change?  I used the built-in Administrator account to log in and then tried to create a new administrator account or to change one of my other administrator accounts and it would not allow me to do.  What else can I do to have an administrator account.  If there is a Vista update that made the change - could you tell me what day it was.

  Thank you

  You said you tried the iin built administrator account - did you mean the account designated in this procedure: http://www.vistax64.com/tutorials/67567-administrator-account.html.  If this is not the case, try to use this procedure to create a new administrator account and see if it works (or use it to modify your current standard accounts administrator accounts and then return the administrator accounts.

  I have not heard of this problem before and if it causes an update, others here would be announcement of similar problems and I never saw any of these positions. Still, it could be caused by an update, but it is unclear what update caused it it you can't help remembering when the problem started and tell us what updates have been installed around this time by number of KB.  If you honestly think that it is a problem of Windows Update, then you should transfer your question in Forum Windows Update: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where experts in the updates wll be more that happy to help - but since you don't know when the problem started or what update or updates may be the cause It will be very difficult for them to provide recommendations (as it is here for us).

  Hare done you nothing recently requiring administrative rights so that we can determiine when accounts ceased to have administrator rights? Did you all any program?  You did changes in the control panel?  Did you install any new harware or drivers of devices?  NO MATTER WHAT?  You may not go back further than you think to do a restore point that could very well solve the problem if you remember when you did a single administrator can do.  System Restore does not affect your data at all.  You just need to re - install everything you have installed, including updates between now and the restore point.  If it'snly a week or two or even three there, which is probably not so much to do - you do not install several new programs are that often you (and Windows Update will be autormatically re - install the removed updates here so no effort on your part).

  Here is an article on the evolution of the types of user accounts (but you will need to log in as the built-in administrator for this to work since it can only be done by an administrator) and try the second and more advanced option and see if it works better than the normal method: http://www.vistax64.com/tutorials/122023-user-account-type.html.  While you are connected to the built-in Administrator account, try to do a few other features that require administrator rights to see if it actually has administrator rights itself as it should.  If you can not do all the administrative tasks with this account, then the problem is greater than it seems and we will have to refocuse on the problems of file system or hard drive corruption and we might need to do a re-install to repair/Upgrade from Vista to solve the problem.  Who can still be the case if you are unable to create admninstraror accounts or edit standard accounts to the same administrator accounts by using the built-in Administrator account

  We will try to test your system and hard drive for the corrupton files (and these procedures can sometimes resolve the corruption, but not always):

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator. If you are unable to do this, boot from the installation disc and select recovery and continue until you get to a screen of options, including the command line).  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a disc, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If you use the drive, cd to C:\Windows\System32. Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  Try to put all the corrupt files here so that we can see if they can be repaired with good copies of the installation disc (unless there are too many).

  While in the command line in the same directory, type chkdsk /f /r and enter and let it run.  They tried to set itself to run at the next reboot.   Answer Yes and restart to run the program.  It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.

  I hope this helps (and I am sorry if my first suggestion bother you so much - it is the most logical solution to this type of problem and works in many cases, not most of the cases - I wasn't aware of the circumstances that you revealed in your response, when I suggested it, but I think that it could still be a viable option if we can identify a reasonably recent time somehow). If this isn't the case, please post back the results of what you did and the results of the analysis that you have run and we can go from there.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.