"A driver support Solution Menu Ex is not installed."

Similar Questions

• How to install the driver supports solution menu ex

  When signing on the computer I got a yellow triangle with an exclamation point in him saying: "a driver that support Solution Menu Ex is not installed."

  How do I install it and where can I find?  I am not connected to a printer.

  Hello

  -For how long have you had the problem?
  -Don't you make changes to your computer, after which the issue started?

  Follow these steps and check if the problem persists.

  Step 1:

  Remove the external devices connected to your computer except keyboard and mouse and check if the problem persists.

  Step 2:

  Start your computer in safe mode and check if you get the error message.

  See also:

  How to solve problems of hardware and software drivers Windows XP: http://support.microsoft.com/kb/322205

  Information about the hardware devices for Windows XP drivers: http://support.microsoft.com/kb/319908

• Solution Menu EX will not install after uninstalling

  My Canon MX882 all-in-1 would not go online last night. I ran the Wirless easy install the printer to make sure it was on my wireless network and it connected. The prinbter still showed offline in the printer status.

  I have unintslled all the sofeware Canon and drivers and all have said that they unintslled. I restarted and went through install it. Just what I instaklled appears, except Solution Menu ex it does not appear in programs and features, but when I try to install I get the message "a new version of the Canon Solution Menu EX is already installed. This installationb is cancelled. »

  How to force a reintsll or remove asnd cleaning the partially installed Canon Solution Menu ex

  This isn't earthshattering for me. I have a new laptop on the way and will reinsatlling everything on it. But it would be nice to install Solution Menu EX for now on my old computer.

  Short of reinstalling Windows 8.1, is there an easy way to get this problem fixed?

  Somne software providers offer a cleaning program to completely remove their products, just for a problem like this. The rationale for barrel of chance?

  I downloaded and install 3rd party software that is supposed to do, but they could not find Canon Solution Menu ex

  I met the same problem during the installation of the drivers from Canon and the software on my new PC. I uninstalled the Quick Menu of Canon Solution Menu EX installed. I tried to install quick menu and he told me that it was incompatible with the Solution Menu ex

  I went back and read the info about each feature and found the warning in the Quick Menu to say it can uninstall Solution Menu EX before installing the Quick Menu, but it doesn't have a warning in Solution Menu EX info.

  As Solution Menu EX was the feature of not install it, I read his information and that he had not seen any incom [atibility with Quick Menu. The warning message that Solution Menu EX is already installed is incorrect and confusing. It would be nice if the message had an extra warning that Quick Menu is incompatible with the Solution Menu ex

• We get an error "the driver of the scanner supported by this software is not installed." Install it and then try again"after the installation of MP Navigator

  * Original title: drivers Canon MP160 printer (scanner-MP navigator) on issues of Win8

  Hello

  I bought a win8 system. I tried to install the Canon MP160 driver on the system.

  Had trouble at the start, but was able to install in compatibility mode for win 7, which solved the problem of the printer.

  Now I have problems with the installation of MP Navigator to scan.

  I am able to install MP Navigator but receive error message "scanner driver supported by this software is not installed.» Install it and then try again."

  Help, please.

  Pavan Sandur

  Hi Pavan,

  Thank you for the information.

  You can uninstall the drivers from Device Manager and try to install the latest versions to check the issue.

  If the problem persists, try to install the software of the browser in compatibility mode and see if that fixes the problem.

  http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

  You can also get in touch with the Canon Support for assistance on their products and compatibility.

  http://www.Canon.ca/inetCA/contactus?m=loadcontactus&lang=en&commId=3&typeid=1&msegid=2

  It will be useful.

• solution menu ex is not displayed when the application is started

  I reinstalled my drivers and Canon MG5320 software several times, and the Solution Menu EX nor the MP Navigator EX 5.0 screens appear with the starting of applications. I have no way to change the destination for my scanned image file.

  The solution I was looking for is described here: http://justinsmind.wordpress.com/2010/09/18/mp-navigator-ex-not-running-correctly-with-windows-7/

  The problem was a leftover Dell all in one folder in the twain_32 folder. After removing the old Dell files, properly installed Canon software.

  This looks like a problem faced by many users.

• Dell Optiplex PC 390: the driver for the PCI device is not installed

  In "Devices and printers" my desktop unit shows a yellow triangle with an exclamation point.

  When I click on "help" I get the message "PCI device driver is not installed. When I try 'apply this correction', nothing happens, it retains only the search.

  I've read to go to "Control Panel > Device Manager" and click on the part of the problem, then click on "Details > hardware ID" and I get the following:

  PCI\VEN_1FD4 & DEV_1999 & SUBSYS_01011FD4 & REV_00

  PCI\VEN_1FD4 & DEV_1999 & SUBSYS_01011FD4

  PCI\VEN_1FD4 & DEV_1999 & CC_070800

  PCI\VEN_1FD4 & DEV_1999 & CC_0708

  I don't know where to take from here. Can anyone help?

  Thank you

  Kathy

  Hi, Kathy:

  Here is the link for the driver you need...

  http://www.Dell.com/support/home/us/en/04/drivers/DriversDetails?driverId=DMD90&FILEID=2967023673&osCode=W764&ProductCode=OptiPlex-390&LanguageCode=en&CategoryID=cm

  For later use, there is a Support Forum of community Dell for Dell desktop PC.

  http://en.community.Dell.com/support-forums/desktop/

• Problem Win7: Device driver (* .inf) within the distribution is not installed in setup.exe. Why?

  Hi people,

  We have a device driver (* .inf) to our application that is added to our distribution , we create in CVI. In the past we did copy the *.inf in the /dossier inf directly (using the distribution Installer "files"-Tab "").

  Recently, we have followed the guidelines described in "Using LabWindows/CVI to install your device .inf files.

  So we have now chosen a significant subdirectory of our application as the destination folder for the file *.inf instead of directly copy in the system directory.

  Everything works well (besides the fact that our driver has no signature and needs user interaction), while using Windows XP.

  DIFxApp (run MsiProcessDrivers) recognizes the *.inf file and installs the device driver.

  After completing successfully the setup.exe, the specified *.inf has been duplicated as oem*.inf/pnf under /INF.

  But under Windows 7 the *.inf is not installed. I ran "setup.exe/l * v" for the information of the installation log file.

  And I found this article:

  MSI (s) (8:9 C) [13:56:41:043]: jumping action: MsiProcessDrivers (the condition is false)
  Of course the step of installing the drivers is ignored.

  Choose the /INF in the folder target to the *.inf (which does not work on Windows XP) everything works fine.

  Does anyone know why MsiProcessDrives is ignored in Windows 7? It is always ignored or I do something wrong?

  Help is appreciated!

  Thank you!

  Philipp

  PS. : The device driver *.inf was written for several OS (XP, Vista, Win7) target according to Microsoft guidelines for this. So it of a universal *.inf file and can be used in each operating system from XP to Win7.

  Good,

  I solved the problem myself.

  The problem is related to the DIFxApp.dll , which is available as 32-bit and 64-bit version.

  In my case, I created the distribution as the 32-bit version. That's why 32-Bit DIFxApp.dll is merged into the MSI file that is not compatible with Windows 7 (64-bit).

  This is why NOR added to this CustomAction Condition (NOT VersionNT64) for MsiProcessDrivers, which is perfectly adapted to the species but of by not having is not the *.inf file

  installed in Win7. I guess the distribution building like Release64 it will use the 64-bit Version of DIFxApp.dll. I'm not able to verify that (still works on XP).

  But then it will probably crash on XP.

  But anyway. We have a distribution for the two BONES.

  Quick & dirty solution I figured out:

  -Edit-> files distribution: Add the *.inf file to C:\window\inf

  -Manually add VersionNt64 condition in the resulting MSI file under component -> (you can use the ORCA editor for this)

  So now, in the case of XP, the *.inf file gets installed by DIFxApp.dll.

  Windows 7 using the *.inf is copied directly in the windows/inf folder and installs automatically the first time that the device is connected.

  I guess you can merge DIFxApp.dll (32 bit) and DIFxApp.dll (64-bit) to the MSI and manage things together, create conditions. But it is not quickly implemented. At least for me is not...

  Regards Philipp

• Of EPSON printer driver dealing with CD printing is not installed

  Fantastic little printer and I want to continue to use it.

  I managed to install all the drivers for it, except one. When I try to print on a cd/dvd, I get the message "thedriver of printer EPSON The dealing with CD printing is not installed". I have been all over the internet, but all I found was a more recent version of programming Print CD that gives me the same message.

  I use a laptop Lenovo G505 with windows 8.

  Any pointers in the right direction for these drivers would be very appreciated :)

  Original title: "Epson R300/Windows 8."

  Hi Neil,

  Thanks for the reply.

  Please provide detailed information about the issue.

  You mentioned printer works very well as you are able to print on paper or printing on CD/DVD covers.

  Whenever you try to print on CD/DVD you get the message from is not installed dealing with EPSON The printer driver to print CD.

  You can check the link to fix the problem.

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?infoType=FAQ&OID=29081&FOID=178014

  Note: Article is for Windows 7, but also applies to Windows 8.

  If the problem persists, I suggest you refer to the EPSON forum support.

  You can check out the link below to send your request to the support forum EPSON.

  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp

  I hope this helps. If you have any other questions, we will be happy to help you.

• Device problem: "Master UDS Bus of Kernal USB driver software Bus by TCP is not installed. Looking for driver fails.

  New install of Win 7.  Control Panel >... > devices and printers: problem with the computer. Convenience store ran with results: "pilot of Master NODES Bus of Kernal USB software Bus by TCP is not installed. Looking for driver fails.

  Note: the only known problem I have is that I can't print to a printer USB connected in local (HP 5280).  Curious, the printer PC utility I can print a test page.  Microsoft Office 2007 apps, not printing.

  I get the same error message.

  It seems to be related to my D - Link DIR-655 Router and software (offered through D-Link) called "SharePort," which allows the USB port at the back of the router to use for networking!

  I have 5 PCs on my home network and printer. With installed Shareport, I connected my printer to the router via the USB port. I don't have to have the computer on it, I used initially to install the printer.

  To access the printer on any PC, I just have the icon in my taskbar.

  The error message is displayed because, by default, SharePort is closed and it reads it as "not installed"!

  I used it with Vista and Windows 7 Ultimate x 32 and x 64 with no problems!

  Just as with the 'coprocessor' "impossible to install driver" error message, I uninstalled them in (several times) Device Manager and the error messages no longer appear!

  So, in my case, the messages themselves were the only mistake!

  FYO: Coprocessor refers to hardware devices such as fingerprint security to access your PC, instead of a password!

  I hope this has been helpful!

• hard drive is damaged and I can not install my windows vista product

  HII

  I bought my computer hp laptop with windows vista home primume software.

  A few months ago my hard drive has been damaged and all data lost

  I have the product key and the number of product

  can I reinstall the product from the microsoft web site or other means?

  Thank you very much

  Shay

  If you replace your hard drive, please contact HP:

  How to get Vista recovery Media to say things back to factory settings .

  There is no Vista free download legal available.

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=au

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Driver XP GPIB-USB-A has not installed with NI488 - 2.8.1

  I have the DVD driver for August 2011, and I installed NI488 - 2.8.1, which should have the GPIB-USB-A driver in it. I plug it in, and Windows cannot find the driver for it. Is there a specific folder, I do so he could find the driver?

  According to the readme, it is not supposed to be the - one support and has not been supported since version 2.2.

• All-in-one Officejet Pro L7780: driver HP Officejet Pro L7780 will not install with Windows 10

  Recently, my HP Officejet Pro L7780 stopped printing. I uninstalled the driver and then reinstalled the driver from the HP website. Every time, when installing, I get a message that "bing bar does not work on this version of Windows. Once the installation is complete, the test page is fine but I can't print from one of the applications (e.g., WORD, Adobe Acrobat, etc.), getting an "Error printing" message, rather than each time.

  I use Windows 10. The printer was working fine since I've upgraded to Windows 10 until recently.

  I've uninstalled and reinstalled the driver several times as suggested on the HP website. Any suggestions on how to solve this problem.

  Thank you.

  Hello @AMNYC2015and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are having errors in the print driver. I would like to help!

  I recommend to remove the cartridges ink and starting by a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I also recommend running the HP Print and Scan doctor.

  Good luck and please let me know the results of your troubleshooting operations. If this solves the problem, click on accept the Solution below, as well as others to find the answer.

  Thanks for posting on the HP Forums!

• The driver for my GL1 Camcorder will not install.

  The driver has charged several times in the past, but right after that I uninstalled a program of edition of smoking. I suspect that the driver is included in Vista. Canon offers no support for firmware for this device.

  Hello
  Yes, I completely agree. Please see this link. I think that it is the version of Windows Movie Maker you want.

  http://www.Microsoft.com/download/en/details.aspx?id=34

  I hope this helps!

• Driver for SM bus controller is not install

  My hard drive of laptop DV6 - 6173cl failed.  I replaced the (1 terabyte) hard drive with an older and smaller (120 GB) I still have an old HP laptop hard drive and reloaded Windows 7 (64 bit) OS.  Still have a lot of disk space.

  Other devices - SM Bus controller driver is not loaded and does not load when "update driver software" is requested. I tried to 'turn off' and restarted the system – still no driver.

  I read something on identify the chipset and get the driver from the manufacturer-, but the instructions indicated to me the 'display' (Intel HD Graphics r) chipset, and comes under the graphics card in the Device Manager, as well as graphics Radeon (TM) HD 6770 M card.  Both have working drivers.

  I'm NOT a person tech in every sense of the word - I understand little or nothing of the workings and the interactions of these different elements.

  I looked online inside the laptop for the drivers for SM Bus controller.

  I can't find any help with everything I read, like say more just go and "update your driver.

  Can someone help me?

  Hello

  Please use the followin driver for SM Bus controller:

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55095.exe

  For video, the two work so please don't break them.

  Kind regards.

• HP Solutions Center's will NOT install on Windows 7

  Hello world

  I have Windows 7 64 bit and a HP Photosmart C309a all in one. My HP Solution Center disappeared after going to Windows 7. Now, I can't scan or make photos or anything but the right impression. I downloaded the latest version of the "full" of HP software which they posted 03/10/10. Downloads, it will not be installed. I get messages like fatal error #24910544.zip and #1935 error occurred during the installation of Assembly Microsoft.MSXML2 processor architecture = "x 86", public key token = 6bd6b9abf345378f, version = 4.1.0.0, type = win 32. Help! I landed a job after his foot for 22 months and need to scan and e-mail files to my new employer and I can't get this stupid thing to work. Help, please! Thank you.

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=au

  Details of HP.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner