Roads divided into the network data model

Similar Questions

• Returns a route with the network data model

  Hi all,
  
  I like to read (on Chapter 11 of "Pro Oracle Spatial for Oracle Database 11g" manual) is it possible to receive the direction of travel of the computation of the path more runs using the routing engine.
  
  I want to ask you: is possible to receive the sense of the market by using the network data model? (for example, by using the Java API).
  
  Thank you in advance.

  Hello

  NDM API manages only the paths to the topological level. i.e. path of nodes and links. It generates no routes since the paths.
  You must use information Street links to generate driving directions yourself. You may need to use the sign post information as well as information geometry (towers from left to right) for directions.

  You can also use (API XML that uses the NDM API as its scan engine!) of the motor routing service Oracle to generate your itineraries which will include directions.

  Jack

• Could not add the instance VO in the AM data model

  Jdev version: 11.1.2.4

  Steps to follow:

  (1) created a VO based on the SQL query.

  (2) when you try to add the VO instance in the AM data model, "Add an Instance" arrow (right arrow) is disabled.

  Please advise.

  Found resolution - Metalink Note 1530486.1.

• The Siebel data model with attribute mapping rule OPA?

  Hello
  
  Someone at - it has mapped siebel attribute of data model with the attribute rulefiles (rule of word doc file) (for example, p1, p2, p3... generated automatically)?
  
  I imported the siebel data model in OPM version 10.2. He created siebeldatmodel.xsrc file. all siebel attribute created with ID, model ID with the same name as the name attribute of siebel. but in the rulebook, we attributte with p1, p2, p3... names etc.
  
  The problem I am facing at I'm not able to map the attribute siebel generated with attribute (p1, p2, p3) rule book
  
  Any quick suggestions of experts will be very apperciable.
  
  
  Thank you

  There are a few simple rules for text attributes.

  1. unless the attribute belongs to the global level, the attribute must have the text of the entity included in its text. Thus, if the attribute belongs to the 'contact' it must understand that in its text. The possible options are:

  "* the contact work country."

  "the country of work of * the * contact."

  2. you cannot have two attributes with the same public name or the same text. So, you will get an error if you have two attributes with the same text "the country of work.

  Published by: frank.hampshire on July 27, 2011 13:50

  Published by: frank.hampshire on July 27, 2011 13:50

• Can not see all the stored procedures in the Entity Data Model Wizard

  I hope it is a simple oversight on my part I try to use the new beta version of odp.net with entity framework support. I can open the Entity Data Model Wizard, give him my information database, and I can choose various tables to use successfully. But in the list where I select the tables, views and stored procedures, the wizard does not see my stored procs or my point of view.
  
  Does anyone know why he would see the tables but not views or stored procedures? My procs can be found under "packages" If that makes a difference. I tried to create a fictional stored procedure at the level above the title of 'procedures', but it is unclear whether.
  
  Is it possible for me to debug this from here? The log files, I could watch that would help me?
  
  Thank you
  Jim

  I belive your Oracle database 10 g such as 9iR2 predates.
  ODP/EF Beta does not list the stored procedures or functions when connect you to a database Oracle 10 g before.

  Readme.txt:
  4. the procedures are not compatible with the DB 9.2.
  Thus, there is no stored procedure listed by the EDM Wizard for 9.2 DBs.

• Create the new data model

  How can I create a new data model?

  Hello

  In the browser, right-click on the drawings and models, select 'New Design'.

  Maybe look in the tutorials.

  Joop

• Generate the Sql Data model ER diagram

  Hello

  I want to use the Oracle Sql Developer Data Modeler to generate ER diagram for my schema. There are a lot of tables in this schema, so I would like to exclusively identify the tables that should be selected to generate my ER diagram.

  Basically, I want these table that are related to other tables here. The reason being, if I select all the tables in the schema, and then I went to these tables in the ER diagram which have nothing to do with other tables.

  Please can anyone suggest write queries that produce this data dictionary?

  Thank you.

  select uc1.constraint_name,
         uc1.table_name,
         uc1.constraint_type,
         uc2.constraint_name,
         uc2.table_name,
         uc2.constraint_type
  from   user_constraints uc1,
         user_constraints uc2
  where  uc1.constraint_type='R'
         and uc1.r_constraint_name=uc2.constraint_name
  

  This gives you the relationship between the primary and foreign key

• Trying to file share two computers that are running Windows XP, but every time I go into the network working group, that it says access denied.

  original title: HELP!

  Trying to file share two computers runing xp but whenever I go to enter the network working group, that it says access denied

  http://helpdeskgeek.com/Networking/connect-two-computers/

• DRIVE DISAPPEAR INTO THE NETWORK SHORTLY AFTER THE START OF

  "I have 3 computers on my local network."  Each of them is shared and allows anyone to access.  However, when I try the search to another computer, it tells me that is not accessible and I could not have permission to use the network resource.  I shared the files to everyone and everyone should be able to read the files in the group.  He said as there is no enough storage server to process the order.  My network is on a DSL router and it is not server as such.  So I don't understand what the problem is"

  First of all, let me say thanks to JW that suggests an answer to the "not enough space in server".

  While I did change to the registry and increase in size, but it has not helped solve the problem do not see the other computer on the network.

  One thing I didn't mention is that there is a computer on my LAN, I can see there are in the network, when this particular machine started upward.

  However, after a few minutes, it disappeared from the network.    When I do a search in the network using the IP address assigned by the router, it will more be found.

  This is another problem, I'm curious and hope one can help.

  Hello

  "Server out of memory to process the order" means truoble on the computer you are working on at the time.

  Not to see another computer, or a permission problem to connect, means sharing problems on the computer that you are trying to connect to.

  Sharing on Win XP

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted

  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP -http://support.microsoft.com/kb/875357

  In Win XP pro you can visually see the setting of authorization/security and configure them according to your preferences.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  * Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• A cable is not plugged into the network adapter 'connection to the Local network.

  Hi, I am using a Dell Inspiron E1505... OS: Vista... 32 bit... IE 9... I still use dial-up "Conexant HDA D110 MDC V.92 Modem" connection connected to the internet without any problem... the problem is when I asked someone to download a program "MS Office Home Student & 2010"(acheté le logiciel àle staples)... the person downloading the program via an Ethernet connection on my laptop... "." I never use the Ethernet connection to connect to the internet... Open to the top of my "Network connections" window and noticed my 'connection to the local network' has a red X and says "network cable unplugged"....." "" Broadcom 440 x 10/100 integrated controller. My toolbar in the bottom right of the screen displays an icon of two monitors with a red x as... I have made several attempts to fix using the "Microsoft fix - it Center... didn't help me..." also "diagnose and repair" on my laptop... no positive results... In the window "Network & sharing" "also shows a red X... Please advise... Best regards, John

  Hello

  Reading between the lines a bit here, it is my understanding...

  1. Never use Ethernet, probably because you don't have broadband for some reason any?
  2. Due to the size of the download, you asked someone else to do it with no broadband?
  3. As a result, which is two screens with a red X icon, but never used to be there?

  This icon with the red X is only informative. If you do not use Ethernet then you won't have connected cable, which means that the information you see on "network cable is unplugged" is correct. If you don't like this icon, you can hide...

  • Right-click on an empty part of the taskbar, and then click Properties
  • Click the Notification area
  • You will see a check box for the network, there uncheck and then click OK to hide the icon
  • Reverse this process, if you want to display the icon

  Or is your problem you can connect is no longer with dial upward? If this is the case...

  • Click Start, type inetcpl.cpl and press enter
  • Click the Connections tab
  • 'Never make a connection' values? If this is the case, always select "default connection" (or "Number using whenever a network connection is not present")
  • Click OK

  Tricky

• I'm trying to set up an Ad Hoc network, but there is no option for the Ad Hoc network configuration when I go into the network and sharing Center.

  I looked at how to make a point of my computer because I have a usb wireless internet device for my laptop and I tried to get an ad hoc network setup but there is NO option for the CONFIGURATION of the NETWORK AD HOC when I go to network and sharing Center... what should I do?

  original title: ad hoc isn't here...

  Hi NickBean2,

  You can refer to the following articles and see if it helps.

  Set up a computer-to-computer (ad hoc) network
  Solve problems, find wireless networks

  Hope this information is useful.

• Filter KeywordFilterField customized for the tabular data model

  I am currently looking for the rows in the table that is filtered through the KeywordFilterField. The underlying data are in table form:

  Contact {name, phone, etc etc}

  The KeywordFilterField shows only what I pass to it (Contact.Name) by calling setSourceList() and filters that the channels in the list. So if I get the numbers, which will return a list empty, because none of the Contacts have numbers in their names.

  However, what I want to do is query the table, like a SQL query, retrieve lines that correspond to a part of Contact.Name or Contact.Phone. (Remember this application don't use SQLite.) I'm using RMS to persistent storage and I created my database and queries of base by hand.)

  Is there a way I could customize/override the filter query so that the KeywordFilterField calls my query functions rather than it's default filter String? It is a base with search CRUD application. I use KeywordFilterField because it's everything I need.

  Any help would be useful.

  It is possible with a text field and a list field, this way you can make your own personalized search for the keyword filter field does not search your data the way you want. In addition, I know that the keyword filter field is broken and that it was returning always completely incorrect search result for me.

  Here's an overview of what to do. Some things I can't tell you how for example to what is happening in the function "searchContacts" since it is up to you to write the code to do whatever custom search you want.

  class CustomKeywordFilterScreen extends MainScreen implements FieldChangeListener, ListFieldCallback
  {
      //just a slightly modified edit field for use in entering keywords
      private CustomKeywordField _filterEdit;
      //a standard list field
      private ListField _countryList;
  
      //temp variable to hold the last keyword searched so we don't search for it again
      //you'll see this used later on
      private String _previousFilterValue;
  
      //any other private vars you need to hold search results go here
      //we'll use an a Contact[] for illustration
      private Contact[] _contactResults;
  
      CustomKeywordFilterScreen()
      {
          super(Manager.VERTICAL_SCROLL | Manager.VERTICAL_SCROLLBAR);
  
          //initiaize to empty string
          _previousFilterValue = "";
  
          //searchContacts is whatever function you write to do the customized search you want,
      //in this example passing an empty string returns all contacts
          _contactResults = searchContacts(_previousFilterValue);
  
          //create the edit field and set it as the title of the screen so it's always visible,
      //even when you scroll the list
          _filterEdit = new CustomKeywordField();
          _filterEdit.setLabel("Search: ");
          _filterEdit.setChangeListener(this);
          setTitle(_filterEdit);
  
          //create the list for showing results
          _contactList = new ListField();
          _countryList.setRowHeight(-2);
          _contactList.setSize(_contactResults.length);
          _contactList.setCallback(this);
          add(_contactList);
      }
  
      protected boolean keyChar(char c, int status, int time)
      {
          if (c == Characters.ESCAPE)
          {
          //user pressed escape key, if there's something in the edit field clear it
          //otherwise handle it as closing the screen or whatever else you want
              if (_filterEdit.getTextLength() > 0)
              {
                  _filterEdit.setText("");
              }
              else
              {
                  //close the screen or do something else, it's your call
                  //maybe even do nothing, whatever you want
              }
              return (true);
          }
          else
          {
          //all other keystrokes set focus on the edit field
              _filterEdit.setFocus();
          }
          return (super.keyChar(c, status, time));
      }
  
      public void fieldChanged(Field field, int context)
      {
          if (field == _filterEdit)
          {
          //test the edit field's value against the previously searched value
          //if NOT the same then do a search and refresh results
              if (!_filterEdit.getText().equals(_previousFilterValue))
              {
              //cache the newest search keyword string
                  _previousFilterValue = _filterEdit.getText();
  
                  //search your data
                  _contactResults = searchContacts(_previousFilterValue);
          //update the list size to cause it to redraw
                  _contactList.setSize(_contactResults.length);
              }
          }
      }
  
      public void drawListRow(ListField listField, Graphics graphics, int index, int y, int width)
      {
          if (listField == _contactList && index > -1 && index < _contactResults.length)
          {
              //draw your list field row as you want it to appear
          }
      }
  
      public Object get(ListField listField, int index)
      {
          if (listField == _contactList && index > -1 && index < _contactResults.length)
          {
              return (_contactResults[index]);
          }
          return (null);
      }
  
      public int getPreferredWidth(ListField listField)
      {
          return (Display.getWidth());
      }
  
      public int indexOfList(ListField listField, String prefix, int start)
      {
          return (-1);
      }
  }
  

  class CustomKeywordField extends EditField
  {
      CustomKeywordField()
      {
          super(USE_ALL_WIDTH | NO_LEARNING | NO_NEWLINE);
      }
  
      protected void paint(Graphics graphics)
      {
          super.paint(graphics);
  
          //Draw caret so the edit field always shows a cursor giving the user an indication they can type at anytime,
      //even when the focus is on the list field that is used in conjunction with this edit field to create a
      //keyword filter field replacement
          getFocusRect(new XYRect());
          drawFocus(graphics, true);
      }
  }
  

• Consolidation of the ROWSETS(Data Models) different 3 in 1

  Hi all
  
  I have this huge report requirement and I'm a bit confused. I usually find answers without even askin them here (thanx 2 U guyz)... It's something new for me.
  It's here.
  I have 3 sets of data or fixed line for 1 report but I have group three of them with the help of another State of the rowset
  Where I'm stuck, is that all sets of lines have a similar column 'DATE' and and even the condition of grouping is DATE. Each condition grouping of individual lines is also 'DATE '. then I tried for various options, but it is impossible to get a work around... If anyone has any bright ideas on let me know.
  
  It should look something like this
  
  Group by date (4 lines)
  Date group (rowset1)
  rowset1
  end of group by date (rowset1)
  Date group (rowset2)
  rowset2
  end of group by date (rowset2)
  Date group (rowset3)
  rowset3
  end of group by date (rowset3)
  end of group by date (rowset4)
  
  1 thing more I even tried with a unique dataset query for this report instead of 3, but it did not work well, because I TRIED to use the IF ELSE(with the 3 data sets query in a single query) instructions in the query generator n the request has never been analyzed... I would like to know if it is possible for me to write the query using IF ELSE or any other conditional expression... Juice I need of a workaround for this somehow. Let me know if you need additional information.
  
  Kind regards
  Sollyemmy

  You've sent the updated files

• How to insert text in the middle of the file data model text in specific places?

  Hi all

  I need to add (text) data to specific model of existing text file locations and then rename the newly written file.

  This is a more compact and more efficient way to do it. You can optionally replace the recursive section of path with the file entry list VI. (the file IO - palette of functions of advanced files, take a look at the help file, you can search for a model in the name of the file and returns an array of the file found paths).

  Ben64

  

• How do you get the layers work correctly when you create a document merged into the InDesign data merge feature?

  Hey everybody,

  I working on a card game using data with a .csv file merge and spin in unusual behavior when you create a merged document when my master document had layers.  Imagine I had a layer of structure that looks like this:

  Layer has
  -< DataMergeFrameA >

  -Cooked in the static element
  Layer B

  -Cooked in the static element B
  -< DataMergeFrameB >

  -< DataMergeFrameC >

  Layer C
  -Cooked in the static element C

  -< DataMergeFrameD >

  Preview, this hierarchy is respected and the image is superb.

  When I create my merged document that each individual card includes this editable structure:

  Layer has
  -< DataMergeFrameA >

  Layer B

  -< DataMergeFrameB >

  -< DataMergeFrameC >

  Layer C

  -< DataMergeFrameD >

  And the order in which the elements are drawn resembles what happened past:

  -< DataMergeFrameA >

  -< DataMergeFrameB >

  -< DataMergeFrameC >

  -< DataMergeFrameD >

  -Cooked in the static element

  -Cooked in the static element B

  -Cooked in the static element C

  I would * really * like solving this problem without going through a column of data fusion with just the same picture in each area or something stupid like that, especially because some of my other static elements are generic text boxes. Is it possible to apply the stacking order in a merged document?

  I have attached a screenshot of the preview and the merged document.
  * WARNING: The main art is a temporary placeholder *.

  The one on the left is how it looks in preview. The second is the merged document. The major problems are that a) static grass image should appear on the art main and b) main image overlays areas of main text on the left. How can-

  

  Try moving it all off the master and on the page of document in the model.