Create the new data model

Similar Questions

• How to use the model instead of RP pspice to create the new component?

  Hi, I need to create the model of opa890 of TI, but I found no spice I find model pspice, how to use it to create the new template part.

  Fouda, salvation

  I took a quick glance to the component but for some reason, the model pspice does not correctly applied to the component. The second problem was that the pins have been mapped properly. I've done the component for you with the model and print and attached it to this message. You just need to add it to your database of click with the right button on the component, and then clicking on save to DB component.

  If all goes well, you should start to see the results of the component. I hope this helps.

  Best regards

• Unable to create the new domain file

  Hi experts

  I am trying to create the new domain file, but there is no success.

  Tools-> domain Administration > file-> Select

  When I choose, the dialog box open typed the new name for file field, you click Open.

  the error message is "mydomains.xml is not a domain file.

  Please tell me how to create the new domain file where you will store the areas associated with my project.

  Thank you

  Hello

  With the dialogue of the Administration of the areas, you modify xml with the areas. You cannot create a file or assign the file with the fields in given the design from there.

  Documentation:

  SQL Developer Data Modeler does not include the default domains file.

  To create new field definitions, select Tools > areas of Administration and click Add to create and add your own domains. These areas are added to the default value of the file, defaultdomains.xml, and can be used for all your projects.

  The file is located in /datamodeler/types/defaultdomains.xml

  Basically, you should

  1. create /datamodeler/types/defaultdomains.xml if it does not already exist

  See Tutorial: modeling of data for a small database

  2. create some (open) design and import file fields to file-> import-> areas

  3. after that study is registered again Directory /domains with design level domains file inside the tree of creation will be created.

• Can not see all the stored procedures in the Entity Data Model Wizard

  I hope it is a simple oversight on my part I try to use the new beta version of odp.net with entity framework support. I can open the Entity Data Model Wizard, give him my information database, and I can choose various tables to use successfully. But in the list where I select the tables, views and stored procedures, the wizard does not see my stored procs or my point of view.
  
  Does anyone know why he would see the tables but not views or stored procedures? My procs can be found under "packages" If that makes a difference. I tried to create a fictional stored procedure at the level above the title of 'procedures', but it is unclear whether.
  
  Is it possible for me to debug this from here? The log files, I could watch that would help me?
  
  Thank you
  Jim

  I belive your Oracle database 10 g such as 9iR2 predates.
  ODP/EF Beta does not list the stored procedures or functions when connect you to a database Oracle 10 g before.

  Readme.txt:
  4. the procedures are not compatible with the DB 9.2.
  Thus, there is no stored procedure listed by the EDM Wizard for 9.2 DBs.

• create the new file using report generation express vi

  Hello

  In my application, I need to write that certain data in spreadsheet Excel. For whom I created an excel template and I used the express vi report generation Toolkit to record appropriate data in the columns of the place. I need a new file created every day by the name of the day and write the data that he rest of the day. I have problems, create the new file using this express vi. I tried to use the low level vi but not able to make properly.

  Join my code and the excel template.

  Help, please.

  Thank you!

  I suspect that your problem is illegal characters (' / ') in your path, certainly it is the case in your original vi. You need to format your path, something like this (underscore instead of a slash stroke):

  

• ORA-19504: cannot create the file '+ DATA '.

  Hello everyone.

  This is the scenario:

  We have a test server that is used to restore daily backups of the Production database. Restore us the database with the same SID as the production one.

  For specific reasons, we need create a second database (with a different SID) on this server with an older backup from the production one. To realize that I'm trying to use a part of the "DUPLICATE without connection to the target" tutorials on the web.

  I tried the simple guide that I found which is:

  (1) copy the backup files cold /somedirectory

  (2) start OLD database with nomount

  (3) connect RMAN with OLDER as an auxiliary

  (4) run the following: DUPLICATE DATABASE FOR OLD BACKUP LOCATION ' / somedirectory' NOFILENAMECHECK.

  Here's the result (I deleted some lines because of the size of it):

  ----------------------

  RMAN > ProdDB to OlderDB DUPLICATE DATABASE

  2 > LOCATION of BACKUP "/ home/oracle/OlderBackupFiles.

  3 > NOFILENAMECHECK.

  4 >

  From October 1, 14 Db double

  content of Script memory:

  {

  clone of SQL 'alter system set control_files =

  "+DATA/OlderDB/controlfile/current.829.859839217" comment =

  ' Set by RMAN "scope = spfile;

  clone of SQL 'alter system set = db_name

  "ProdDB" comment =

  ' Modified by RMAN duplicate "scope = spfile;

  clone of SQL 'alter system set db_unique_name =

  "OlderDB" comment =

  ' Modified by RMAN duplicate "scope = spfile;

  clone to stop immediately;

  Start clone force nomount

  Restore controlfile primary clone of ' / home/oracle/OlderDB/controlfile_ProdDB_20141001_4159.bkp';

  change the clone database mount;

  }

  execution of Script memory

  SQL statement: alter system set control_files = comment "+DATA/OlderDB/controlfile/current.829.859839217" = "defined by RMAN" scope = spfile

  SQL statement: change the system db_name set = comment "ProdDB" = "modified by RMAN duplicate" scope = spfile

  SQL statement: alter system set db_unique_name = comment "OlderDB" = "modified by RMAN duplicate" scope = spfile

  (...)

  From restoration to 1 October 14

  allocated channel: ORA_AUX_DISK_1

  channel ORA_AUX_DISK_1: SID = 191 type device = DISK

  channel ORA_AUX_DISK_1: restore the control file

  channel ORA_AUX_DISK_1: restoration complete, duration: 00:00:03

  output file name=+DATA/OlderDB/controlfile/current.829.859839217

  Restoration finished in October 1, 14

  mounted database

  output channel: ORA_AUX_DISK_1

  allocated channel: ORA_AUX_DISK_1

  channel ORA_AUX_DISK_1: SID = 191 type device = DISK

  content of Script memory:

  {

  until the SNA 274262921.

  the value of newname for datafile clone 1 again;

  the value of newname for datafile clone 2 again.

  the value of newname for datafile clone 3 again.

  the value of newname for datafile clone 4 new ones;

  the value of newname for datafile clone 5 again.

  the value of newname for datafile clone 6 again.

  the value of newname for datafile clone 7 again.

  restoration

  database clone;

  }

  (...)

  From restoration to 1 October 14

  using the ORA_AUX_DISK_1 channel

  channel ORA_AUX_DISK_1: from the restore backup set data file

  channel ORA_AUX_DISK_1: specifying datafile (s) to restore from backup set

  channel ORA_AUX_DISK_1: restore datafile 00001 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00002 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00003 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00004 in + DATA

  channel ORA_AUX_DISK_1: restore datafile 00005 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00006 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00007 to + DATA

  channel ORA_AUX_DISK_1: reading from the backup /home/oracle/OlderDB/database_ProdDB_20141001_4157.bkp piece

  channel ORA_AUX_DISK_1: ORA-19870: error when restoring the backup /home/oracle/OlderDB/database_ProdDB_20141001_4157.bkp piece

  ORA-19504: cannot create the file '+ DATA '.

  ORA-17502: ksfdcre:4 cannot create the file + DATA

  ORA-15041: diskgroup space 'DATA' exhausted

  switch to the previous backup

  Oracle instance started

  (...)

  content of Script memory:

  {

  clone of SQL 'alter system set = db_name

  "OlderDB" comment =

  ' Restore the original value by RMAN "scope = spfile;

  clone of SQL 'alter system reset db_unique_name scope = spfile;

  clone to stop immediately;

  }

  execution of Script memory

  Errors in the script of the memory

  RMAN-03015: an error has occurred in the script stored memory Script

  RMAN-06136: the auxiliary database ORACLE error: ORA-01507: database not mounted

  ORA-06512: at "SYS." "X$ DBMS_RCVMAN ', line 13466

  ORA-06512: at line 1

  RMAN-05556: not all data files have backups can be recovered on SNA 274262921

  RMAN-03015: an error has occurred in the script stored memory Script

  RMAN-06026: some targets not found - abandonment of restoration

  RMAN-06023: no backup or copy of the file 4 found to restore

  RMAN-06023: no backup or copy of datafile 3 found to restore

  RMAN-06023: no backup or copy of datafile 2 found to restore

  RMAN-06023: no backup or copy of datafile 1 found to restore

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of the command duplicate Db at 15:39:11 01/10/2014

  RMAN-05501: abandonment of duplicate target database

  Complete recovery manager.

  ------------------------------------------------------------------

  The first mistake of the stack was ORA-19504 while trying to restore the backup of the database.

  First thing I took a glance was ASM occupation but it enough available space.

  The second was a permission problem, but it doesn't seem to be the case because RMAN can correctly write the controlfile to ASM.

  One have some advice on what I should look for?

  Thanks in advance sorry for my English.

  Select this option.

  Hello.

  Thanks, but is not the case. As I have said, that the DATA diskgroup has space enough he uses only a single disk in a RAID.

  But I solved my problem... To the auxiliary database, I added the following to the spfile:

  DB_FILE_NAME_CONVERT = '+ DATA/ProdDB', '+ DATA/OlderDB ".

  LOG_FILE_NAME_CONVERT = '+ DATA/ProdDB', '+ DATA/OlderDB ".

  I don't know why, but with these two clauses, it worked well. Perhaps RMAN was trying to restore it to the wrong place?

• Create the new host to the Cluster and Cluster

  Hi team,

  Have we not document or steps to create the new Cluster and add host to cluster?

  In addition, what are the post configuration that must be done on the ESX host? As switch, Nic, the data store Configuration?

  Should we add the storage front of cluster before adding the host?

  A process document or a step will be really useful.

  We plan to automate the process and any entry is really useful.

  Thanks and greetings

  Riyas Hussain has

  For starters, it is User Guide PowerCLI, that comes with the installation of PowerCLI.

  And there are a lot of messages and blog discussions in this community that meet some or all of your questions.

  See for example establishment of data centres, Clusters and adding ESXi host VMware vCenter 5.x with PowerCLI

  Storage is assigned to ESXi hosts and for use in a clustered environment, you will probably want a shared storage.

  Maybe you need to split issues separate, more specific issues.

  This would make it easier to respond in this community.

• Could not add the instance VO in the AM data model

  Jdev version: 11.1.2.4

  Steps to follow:

  (1) created a VO based on the SQL query.

  (2) when you try to add the VO instance in the AM data model, "Add an Instance" arrow (right arrow) is disabled.

  Please advise.

  Found resolution - Metalink Note 1530486.1.

• How can I find out who created a new data center or virtual?

  Is there a specific log file?  I'm trying to find out who created a new data center and some VM.

  The events are not stored in a file, but are stored in the database of vCenter in the VPX_EVENT table. The creation of a data center is a vim.event.DatacenterCreatedEvent in the EVENT_TYPE column. The user who has created are in the USERNAME column. The name of the data center is in the DATACENTER_NAME column. Time of creation is in the CREATE_TIME column.

  I tried to create and delete a data center and after removing it, I could always find events in the database.

• change the position of the region in the middle of the page / create the new Point of view from the region

  I have used apex 4.1, 10.3 oracle database, theme 21 (scarlet) window7
  
  I want to change any position the region to appear in the middle of the page and I have tray every thing to do and no results
  
  I change REGION_ATTRIBUTES to be: style = vertical-align: middle
  and I add in the header of the region {< div style = "vertical-align: middle" > < / div > ""} and no results and the region do not move in the middle of the page
  
  
  My question is
  1 a way to make the region in middle of page other
  
  2. How can create the new Point of display area as (region Position2, Page (1) template body) with the middle position
  
  
  Thank you
  
  Published by: Ahmed Farouk on April 15, 2012 11:01
  
  Published by: Ahmed Farouk on April 15, 2012 11:01

  Hello

  No need to give ' style = vertical-align: middle ", replace it with this: nowrap ="nowrap"align ="center ".

  see if it works.

  and for the second, you can copy the existing model definition: model, in the table tag you can see #REGION_ATTRIBUTES #, simply add align = 'center' after this

  and apply this model in your area.

  Thank you
  Tauceef

• The Siebel data model with attribute mapping rule OPA?

  Hello
  
  Someone at - it has mapped siebel attribute of data model with the attribute rulefiles (rule of word doc file) (for example, p1, p2, p3... generated automatically)?
  
  I imported the siebel data model in OPM version 10.2. He created siebeldatmodel.xsrc file. all siebel attribute created with ID, model ID with the same name as the name attribute of siebel. but in the rulebook, we attributte with p1, p2, p3... names etc.
  
  The problem I am facing at I'm not able to map the attribute siebel generated with attribute (p1, p2, p3) rule book
  
  Any quick suggestions of experts will be very apperciable.
  
  
  Thank you

  There are a few simple rules for text attributes.

  1. unless the attribute belongs to the global level, the attribute must have the text of the entity included in its text. Thus, if the attribute belongs to the 'contact' it must understand that in its text. The possible options are:

  "* the contact work country."

  "the country of work of * the * contact."

  2. you cannot have two attributes with the same public name or the same text. So, you will get an error if you have two attributes with the same text "the country of work.

  Published by: frank.hampshire on July 27, 2011 13:50

  Published by: frank.hampshire on July 27, 2011 13:50

• How to create the new domain with lookup?

  How to create the new domain with list of choices like terrain dDocType system?

  Administration/Admin Applets tab / SCCM / information fields.
  Add field or edit a custom field if you have one.
  The name field (the name will be prefaced with the lowercase letter x behind the scenes, if ever, you write the code to call it if you name this Fruit it will xFruit for code)
  Define your values for the field, but the important thing for a menu drop-down list or list of selection will be to list the Option activate the checkbox.
  Then, you perform one of the 3 main things to put data in the list.
  1. manually fill in a list of options
  2. use a DB or DB table view to view Configuration Manager
  3. create a complex tree (read the documentation on which I him have not used)

  If this does not answer your questions, click the help button in the applet.

• Create the new database of complete hot RMAN, atrchivelog and backup control files

  Hi all
  
  I'm trying to create the new database U1234 of P1234 of full hot RMAN, atrchivelog and control P1234 file backup.
  
  Here are my steps
  
  (1) to restore the control file
  
  #! / bin/sh
  ORACLE_SID = P1234
  export ORACLE_SID
  RMAN nocatalog target / < < EOF | Tee restorecontrol.out
  startup nomount pfile=/u01/oradba/admin/U1234/scripts/restore/restore071009U1234/initP1234.ora;
  the value of DBID 6767676;
  run
  {
  allocate channel d1 type disk;
  controfile catering to ' / u02/oradba/U1234/control/P1234_control01.ctl';
  Restore controlfile to ' / orarman/restore/P1234/cf_P1234_c-00';
  change the editing of the database;
  }
  EXPRESSIONS OF FOLKLORE
  
  (2) database stop then restart the database with the new contraol file using pfile.
  
  (3) restore data files
  
  #! / bin/sh
  ORACLE_SID = P1234
  export ORACLE_SID
  RMAN nocatalog target / < < EOF | Tee restore_dbfiles.out
  Run {}
  the value of newname for datafile 1 to ' / u05/oradba/U1234/dbfile/U1234_system01.dbf';
  the value of newname for datafile 2 to ' / u05/oradba/U1234/dbfile/U1234_undotbs01.dbf';
  the value of newname for datafile 3 to ' / u05/oradba/U1234/dbfile/U1234_sysaux01.dbf';
  the value of newname for datafile 4 to ' / u06/oradba/U1234/dbfile/U1234_users_d01.dbf';
  the value of newname for datafile 5 to ' / u06/oradba/U1234/dbfile/U1234_tools_d01.dbf';
  the value of newname for datafile 6 to ' / u08/oradba/U1234/dbfile/U1234_audt_x01.dbf';
  the value of newname for datafile 7 to ' / u07/oradba/U1234/dbfile/U1234_audt_d01.dbf';
  the value of newname for datafile 8 to ' / u07/oradba/U1234/dbfile/U1234_audt_d02.dbf';
  the value of newname for datafile 9 to ' / u08/oradba/U1234/dbfile/U1234_lh_x01.dbf';
  restore the database;
  switch datafile;
  }
  EXPRESSIONS OF FOLKLORE
  
  
  ORA-27063: number of bytes read or written is incorrect
  SVR4 error: 28: no space is available on the device
  
  Now, I missed the space during the restoration of data files and want to restore remaining who is 3 and 4 of datafile datafile.
  
  Can you please let me know how I can restore it.
  
  I need to change the names of database after the successful restoration.
  
  DBVERSION 10.2.0.1
  operating system: solaris 10
  
  Thanks in advance.

  Hello..

  Do you have free space? If Yes, then you can try: -.

  RUN {}
  SET NEWNAME for DATAFILE 3 to ' / u05/oradba/U1234/dbfile/U1234_sysaux01.dbf';
  RESTORE THE 3 DATA FILE;
  DATAFILE 3 SWITCH;
  }

  [http://www.oracle-base.com/articles/9i/DBNEWID.php]

  Anand

• Repair your startup disk Bootcamp disappearing after you create the new partition

  . After some research, I found that it was the way forward to create a separate partition, and so I did another partition.

  I didn't know it would affect my Windows partition that I thought it was completely different.

  So now, when I start it up, there is no option to start with Windows. But when I boot the Mac and select Startup disk, it displays Boot Camp is still there, and all my files etc. are still there.

  I tried to create one separate partition (other than Bootcamp). After that its done and I started my computer, I found that the option to boot Windows (Bootcamp startup disk) has disappeared. But I still see boot camp Mac files. Any solution for this? Thank you.

  (I tried to find this solution on the discussion Forum, and I found: repair Boot Camp after having created the new partition, however, I'm not able to follow these instructions. any help would be appreciated)

  For reference:

  Aerospews-MBP: ~ the marcuslo list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 350,7 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Apple_HFS 47.6 Untitled GB disk0s4

  5: Microsoft database BOOTCAMP 101,0 GB disk0s5

  Aerospews-MBP: ~ list of cs marcuslo$ diskutil

  No logical volume group CoreStorage found

  Aerospews-MBP: ~ marcuslo$ sudo TPG - vv - r show/dev/disk0

  See the TPG: / dev/disk0: mediasize = 500277790720; SectorSize = 512; blocks = 977105060

  See the TPG: / dev/disk0: PMBR to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 977105059

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 684969040 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  685378680 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  686648216 92929128 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  779577344 262144

  779839488 197265408 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  977104896 131

  977105027 32 table dry GPT

  977105059 1 dry GPT header

• Partition Windows 10 does not start after you have created the new internal drive

  I'm running OS X 10.11.2.

  I have set up a training camp 10 Windows on my Macbook Pro sometime ago, but today I realized that I need more storage. I watched how do so online and came across this thread:How to resize my bootcamp partition without deleting chtol. I followed the instructions, but could not know how do I find my Windows partition.

  So I think that I have the problem described here: repair Boot Camp after having created the new partition. I did what Christopher Murphy described on the first page and this error message appeared when I pressed "w ":

  "Failed to open device ' / dev/disk0 ' for writing! Errno is 1! Writing of abandonment! »

  I deleted from the extra without internal hard drive name in the hope that he'll fix it, but it didn't.

  I would like to enlarge my Windows partition, but at this point, as long as I can access my Windows Bootcamp partition, that would be great!

  EDIT: I unfortunately do not back to the time Machine.

  Resizing Windows partitions is not officially supported by Apple - Boot Camp: resize the Windows partition .

  Please after the release of

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0