Rolling with the same ID

Similar Questions

• Selection of clips on the timeline, all with the same name?

  Hi all

  is there a way to select multiple clips on a timeline with the same prefix name from all at once; for can then drag them all to his own video track to isolate? They have no name of timecode or roll on them, the clips are all individual files in the finder, but starting all per C1 in the name. Basically, there are more than 100 of them on the timeline and would be almost impossible to do properly and not miss anything, not to mention difficult to select them one by one.

  Thank you

  Nevermind, worked on it, search all...

• my iphone 4S has lost carrier no service modernized 9.3.5 software but my other 4 s with the same carrier is very well after upgrade

  my iphone 4S has lost carrier no service modernized 9.3.5 software but my other 4 s with the same carrier is very well after upgrade

  Hi rog247,

  Thanks for posting here in Support of Apple communities! After reading your post, I see that your iPhone 4S shows 'No Service'. It is certainly important to have access to mobile data; I would like to help get this sorted out.

  Please follow the instructions here:
  

  If you see no Service or research

  If you see no Service or search on your device, or cannot connect to a cellular network or cellular data, follow these steps:

  1. Check your coverage area to ensure that you are in an area with a cellular network coverage.
     • If you cannot connect to a cellular network on your iPhone, make sure that the cell data is on in settings > cellular*. On your iPad, go to settings > cellular data.
     • If you travel internationally, make sure that your device is set up for data roaming. Go to settings > cellular > data roaming.
       
  2. Restart your iPhone or iPad.
  3. Looking for a carrier settings update.
  4. Update your iPhone or iPad to the latest version of iOS.
  5. Remove the SIM card and put it again. If the SIM card is damaged, or does not fit in the drawer of the SIM card, contact your carrier.
  6. Reset your network settings. Tap Settings > general > reset > reset network settings. This also resets the Wi - Fi networks and passwords, cell parameters and VPN and APN settings you used before.
  7. If you have another device, see if you can connect your business with her network to this place.
  8. Contact your operator for:
     • Make sure your account is active and in good and due form.
     • Make sure that there are no failures in your area.
     • Verify that your device is not blocked to receive cellular services and is set up with the right data plan.

  If you still cannot connect to a cellular network and have confirmed with your carrier is not a problem with your account, or your network, try to restore your device.

  If you cannot connect to a cellular network or cellular data - Apple Support

  See you soon!

• Apple Watch series 2 comes with the same battery life?

  ddoes Apple Watch series 2 come with the same autonomy and 18 hours without sleep tracker device?

  Hello

  Yes - Apple Watch series 2 offers up to 18 hours of battery life.

  Follow-up sleep was not announced as a new built-in feature.

• Multiple images with the same file name no doubt prevent export

  iMac running OS X El Capitan v10.11.6; Photos 1.5

  I'm trying to export approximately 331 images and I get an error report saying that only 169 of the exported images due to the inability to create files for 159 of the images.  Then the report gives me the names of files of the first 100 images for which files were not created.  After looking at many images that would not create a file, I realized that, in any case, there was at least one, if not several, other images with the SAME EXACT FILE name as the image in question.  I can't change the names of files by right click on "info".  I tried to export the images and change the names of files to export using the sequential option and the option of album name - always having exactly the same problem.  I even tried not to export an image at once and change the name of the file individually or no available. Is there a work around that? I desperately need to export those specific images. I am trying to create a photo album for shown to mothers who choose a family with which you want to place their child/ren for adoption. I'm at my wit's end.  The kicker is I'm moving towards trying to export all my pictures, and that's going to be a HUGE problem in course for me, so I really hope that there is a way around this question somewhat simply. I am a hobby photographer and use the computer for businesses and crafts.  I've seen a few posts that included answers referencing "AppleScript" - I have no idea how to do something like that.

  From here on I will DEFINITELY ensure that my Canon continually numbers the names of image files and automatically resets.  For the other photos other than Canon, is possible to rename images during the import of the lot?

  All advice and help will be GREATLY appreciated!

  Finder has the ability to rename files with various models of lot.  Simply select all the files to rename, right-click one of the selected files, choose 'Rename X points... '. ", and then set the options and click on the button"Rename ".

• Mac Air 1.3 Ghz i5, 4 GB ram end of 2013 everyone upgraded to El Capitan with the same configuration?

  worried about the going 10.10.5 Yosemite to El Capitan. Especially with only 4 GB of ram. Have 256 GB SSD HARD drive

  would appreciate an answer from people already have the upgrade.problems with the same configuration? slower?

  FWIW, the El Capitan applications are no different from Yosemite. In fact, it is easier on resources in some areas. The main thing you need to worry is to make sure the software and equipment to use is compatible. Make sure you have a good backup in case you change your mind and want to downgrade.

• Problem of airtime with the same SSID

  I often use AirPlay to my iPhone and iTunes on my PC to play for my (home theater installation) AVR - 1506 Marantz.

  Configuring wifi in our House are a router/modem to the ISP and an Asus RT-N56U (in access point mode) with DIFFERENT SSID to which I don't have problem to play AirPlay on any device. I had the same SSID when so I can use wifi roaming without having to change the SSID whenever the other signal weakens.

  When I put two (router & AP) with the same SSID, Airplay icon will not be displayed? But if I put a different SSID to one of the two, airplay icon is back. Channels are on ch.1 (router) and ch.11 (AP). Someone knows how to set up?

  UPDATE:

  Disable NAT in fact access point the AirPlay icon always appear but he cannot yet play through my APR.

  * all updates *.

  12.4.3 iTunes

  Windows 10 updated, firewall offshore

  Marantz 1506 firmware update

  always put iPhone to update to the latest version

  The routers are also updated to its latest firmwares

  What I believe you are describing is a network expanded through repetition, the Apple TV does not work well with repeaters. Try a different configuration.

• How can I restart firefox with the same tabs and windows?

  How can I restart firefox with the same tabs and windows?

  It is not in the file menu or tools. I get nothing when searching for help. FF still knows how to do it, say to update extensions.

  I know that I can do by saving my session, coming out, reboot and restore the session but is there a single command to do this?

  Thank you. -David

  I have attached a screenshot showing how to select restore automatic session just above the setting of the Home Page where it says "When Firefox starts".

  With this set, you can restart Firefox manually out using the menu-

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  -and then restart Firefox.

  If you want a real reboot with a click of button, you can check something on the Add-ons site: https://addons.mozilla.org/firefox/

• IMessage Apple Watch has two interviews separated with the same person?

  My new Apple Watch has a problem with iMessage and I know how to fix this on my iPhone but not watch?

  On my iPhone, that my ID apple is connected to more than 10 devices and sometimes when a new device is added, it adds the addresses on my apple for iMessage and FaceTime ID and I always fix by unchecking the addresses that I don't want in the application settings under "Messages" and "FaceTime." However, this isn't the same thing to watch because there is no option in the settings on the Apple Watch and the watch App on my iPhone.

  I would like to help please?

  Hello

  Apple Watch uses the same parameters (for how you can be reached and how new conversations are started) for Messages as your iPhone.

  If you have two interviews separated with the same person, the following steps may help:

  • On your iPhone, check if there is more than one contact form in Contacts of this person (if so, remove duplicates).
  • Delete old Messages conversations with this contact on each of your iPhone and watch:
    • iPhone: app Messages > swipe to the left on a message thread > delete.
    • View: Open the Messages app (from the home screen, which is accessible by pressing the digital Crown) > swipe to the left on a message thread > tap on Trash / delete.
  • On your iPhone in the app Watch: Watch My > general > reset > press reset sync data:
    • You won't see anything happen after pressing it (the process runs in the background, invisible to the user).
    • Leave a minute or two to allow the course ends.
  • Restart your iPhone and your watch (turn the two together off the coast, then restart your iPhone first):
    • Restart your iPhone, iPad or iPod touch - Apple Support

    • Restart your Apple Watch - Apple Support

• Two thunderbird profile both at the same time with the same user account

  Dear Sir
  I would like to use Thunderbird two at a time for two different profiles with the same user accounts.
  I use linux OS.
  I thought using the:

  1. Thunderbird Pei Profile1 &
  2. Thunderbird Pei Profil2 &

  But at the launch of the second order, that nothing is happening.
  Appears in the foreground thundirbird already started.

  If possible use this configuration now or in the future nex?

  General rule, thunderbird runs only a single instance of a profile.
  However, there are two options, you can try.
  You can use an addon esily switch profiles:

  • https://addons.Mozilla.org/en-us/Thunderbird/addon/ProfileSwitcher/

  There's more help here:

  • http://KB.mozillazine.org/Run_multiple_copies_of_Thunderbird_at_the_same_time

  He said: "several instances is expected for debugging, so use it at your own risk.

  One method would be to use: start > run
  "C:\Program Files\Mozilla Thunderbird\thunderbird.exe"-no-remote Pei profilename

  There is a space before '-no '
  and also before '-P'
  followed by a space and the name of the profile

  You can create a shortcut icon to run each separate profile.

• Is it possible to prevent the 'threading' messages with the same subject all Thunderbird?

  Now Thunderbird seems to clump messages with the same subject and there is a graphic ligature tying these together. Would be nice if I could disable this feature. It is generally more useful if a repertoire of messages appear in reverse order of date or another order I specified when sorting. "Threading", if I can call it that, defeated my sort order.

  It would be nice if I could turn the feature occasionally to discuss a conversation, but for day to day use, I want to turn it off.

  Thank you.

  I believe that this is the setting that you are after:

  https://support.Mozilla.org/en-us/KB/configuration-options-viewing-messages#w_specify-whether-messages-in-the-message-list-are-grouped-into-threads

  See you soon,.
  Dave

• My camera has reached 9999 photos and started renumbering 0001 but in a different folder.  If I import new photos in iPhoto, the older photos with the same numbers are overwritten?

  My camera is renumbering pictures from 0001, but a new camera case.  If I import new photos in iPhoto, they replace the old photos with the same numbers?  The camera knows that they are in a different folder, but what happens when I import into iPhoto?

  iPHoto manages very well duplicate file names - each import is in another folder in the database - no problem

  LN

• where to save the files under options the file name is duplicated how to remove an additional folder with the same name

  Under Options in Firefox, I clicked on save the files under downloads, but the file name twice and an additional file with the same name is created in the folder, i.e.:

  G:\Akbar's Songs\HAMARA DOWNLOADS\HAMARA FORUMS DOWNLOADS FORUMS

  As you can see the file repeats, how can I fix it?

  Also the music files, I download from a site of downloads as a WinRar file and I need to open it. Y at - it an option where the file opens automatically in the folder I chose?

  Thanks a lot for your help.

  Hi Akush, when you install 7 - zip, make itself the default application to open .zip and .rar files. So if you double click on the .rar file, it should open in 7 - zip. If you prefer to decompress immediately, right click the file and look for new 7 - zip items in the menu. I can't think of a way to do this automatically, however.

• Want to sync an iphone with 2 laptops (itunes) with the same account ID

  Hello

  I'm new on this forum, before writing I googled my request, but did not get the exact answer to my problem.

  Perhaps my response was already supported and somehow I missed it.

  I have:

  1: Personal Iphone

  1: personal laptop (ITunes installed with a/c Id)

  1: portable desktop (ITunes installed with the same Id of a/c)

  Description of the problem:

  I want to synchronize my calendars/meetings (Outlook) with my laptop with my personal Iphone desktop.

  Currently what I do and its working perfectly.

  But by the standards of my company/rules, we should not keep any songs/video / / personal snaps/novels (pdf/ebub) on laptop desktop

  So all the animals mentioned above, I used on my laptop.

  Now, I need to sync my Iphone with:

  Laptop Desk to Calenders and prospects for the animals and

  Personal laptop for songs/video / / personal snaps/novels (pdf/ebub)

  should both work without removing other sync

  Is it possible to do?

  It will not work.

  For synchronization purposes, you can have 1 'master '.

  You can use iTunes to synchronize a selection of content and for the other icloud.

• Information retrieval of dead macbook pro drive without purchase mac with the same amount of disc

  I'm completely lost right now and honestly had a really bad time in the Mac store. I love Macs, the staff is usually great, but I ended up leaving enough frustrated after a few experiences of confusion with the sales guy myself.

  So, I entered the mac store with a 2011 13 inch Macbook Pro which has got water damage. It turns out that it was $750 to fix and I decided that I would just get a new one. It was the hardest or disc information you can have, and I've had about 263 on 500 or something used. I want photos and documents to browse and choose what is important.

  Then they assured me that they could extract the information and make a transfer with my computer, but I have to buy a laptop with the same amount of data - so that the Macbook Air for $1,500 instead of $1000 Macbook Air, I was going to learn how to do the transfer. They kept saying it's a case all or nothing-, they cannot choose the data from the hard drive, nor can they give it to me in a way that does not require a complete transfer of the computer and so a computer with a drive for.

  Is it possible that I can do this by a third party? Or download the information from the hard drive on something other than a full computer...?  I honestly don't need, want or have the capability of the computer with the disc like means. I just need a computer for school and would like to stick with the Mac, and the hard drive more small $1000, that's what I can afford right now.

  Thank you and sorry if it came out confused, I'm just really frustrated, I lost all my information to my own stupid mistake and cannot repair.

  p. s.

  Nothing is saved on iCloud and I don't have Time Machine.

  Remove the drive from the computer and install it in an external USB enclosure.