router and modem lights are flashing and the printer does not work wireless and system said detection of problems

Similar Questions

• I put a new ink jet cartridge in the printer and the printer does not work although it is switched on

  Cartridge replacement installed on a lexmark 730 printer inkjet series all the cables and connections ok but the printer does not work

  Hello

  as the poblem started when you changed the ink cartridge contact Lexmark

  http://support.Lexmark.com/index?page=home&channel=supportAndDownloads&locale=en&UserLocale=en_AU

• C1765 done yellow toner a printer roller noise rattling and the printer does not work

  Hear a clicking noise when printing.  Replaced the yellow toner and the rattling is still strong and the printer will not work.  The noise and the vibration felt on the new toner only occurs with the yellow toner.  What is happening, is the printer goes wrong.  "low density, yellow to replace the cartridge, printer restart" I just put in a new cartridge.

  Hello David,.

  Please post on the forum. According to the information you provided, it looks like you have a mechanical failure within the printer itself. This device is more compact and carriers Dell limited parts, the best option at this stage would be to replace the printer. It is the course of action we would take if the product is under warranty.

  Kind regards
  Joseph E

  #iworkfordell

• HP dv7-3085dx power light flashes, but the laptop does not work.

  Hello! I have a HP Pavilion dv7-3085dx. It has a hard drive Bay 2.

  Recently, I bought the caddy + cable kit and an Intel SSD. The thing is, when I plug the sata cable to the motherboard for the laptop, and the SSD to it, the laptop does not light. When I press the power button, it flashes once (the power LED flashes once), but the laptop does not light. When I press again, nothing happens.

  I tried to remove the power supply plug, battery and plug it all again, but the power light flashes once (when you press the power button) and no reaction.

  Maybe it's the sata cable: when I remove the new cable and connect the SSD with the sata cable on the 1 hard drive Bay (the cable supplied with the notebook), it works fine. The laptop starts. And when I connect the former sata cable, with the SSD on the second hard drive Bay, it also works.

  I just want to now what is the flashing light means light? Why it does not work with the new cable?

  Thanks in advance! Sorry for my bad English...

  Emilio.

  It is possible that this is a problem with the kit. I would recommend to download and install the latest BIOS update for your laptop, using the download at the following link: http://goo.gl/rbHkg

  If it still doesn't work after that, I would recommend to suppress the kit for a replacement or to try another.

• put the new ink catrtidges in epson stylus c62 and the printer does not work

  Troubleshoot it but can't find anything wrong, I ran to the printed test page loads and the ink still will not appear on the paper but can see her coming out of cartridge what is the problem?

  Contact Epson for this problem.  It is clearly not a Windows problem if the self-test page does not work.

• When I insert a CD, the drive shows activity by the flashing, but the CD does not work

  I can get it to display video files and clicking on them, get them to run, but I can't get the disk to run it as it is supposed to. If I put the drive in another machine, it wil open to a screen that shows the options to choose from, by clicking on an item will take place that point and, therefore, the entire disk can be explored. I had heard that Microsoft had removed the autorun installation and initially, guess that's the reason, but I've learned since Microsoft had allowed the installation to be replaced, and so had done through Microsoft, so I always use the autorun facility.

  Hello

  Do you mean that you can not use the AutoPlay feature?

  See the bottom of the article, which can be useful.
  The Autorun feature or the AutoPlay feature does not work when you insert a CD-ROM into the CD drive
  http://support.Microsoft.com/kb/330135

• New router now the printer will not work wireless

  The printer is a HP1102W. Operating system is windows 7. At & t installed a new router is a netgear 7550. I tried several times to get the printer to work wireless but just cannot make it work. Not very food to computers so I could really use some help.

  Thank you

  Hello

  Please follow the instructions below to fix:

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

  Kind regards.

• HP Deskjet 2540: The printer does not work.

  My printer does not print the page, I am sinking.  Instead it tries to download a page that I tried to download a few days ago and he has yet to recognize the page.  It was an image of the Liberty Bell, so I assumed it was copyrighted and would allow me to print and I rejected the page.  Apparently he is stuck somewhere in the printer and it does not load and therefore does not allow me to print the page that I need now.  How can I get this thing off my storage or my printer?  I watched everything I know to review and check in the printer itself.  I do not know how to remove the application printing the page because I can't find in the computer anywhere.

  If you can help me, I would be very grateful

  Thank you

  Linda Schwartz

  Hi @lindaschwartz,

  Thank you for joining the HP Forums!

  I noticed your post on how you can not print with your printer HP Deskjet 2540. I'm happy to help you!

  Please try our HP print and Scan Doctorand let me know what happens!

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this will solve your problem!

• Downloaded Windows 10 auto. now the printer does not work

  installed Windows internet window explore 10 on my computer as my printer does not print

  I suggest you to uninstall and reinstall the latest compatible drivers for Windows 7.

  You can also run the troubleshooting of the printer.

  Open the printer Troubleshooter

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems:

  http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  Run the printer difficulty of:

  http://support.Microsoft.com/GP/printing_problems?EntryPoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

  If the problem persists, try to uninstall Internet Explorer by using the following instructions:

  Internet Explorer 10 remove the Windows 7:

  1. Click the Start button, type programs and features in the search box, and then select view installed updates in the left pane.
  2. Under uninstall an update, scroll down to the Microsoft Windows section.
     • Right click on Internet Explorer 10, click on Uninstalland when you are prompted, click Yes.
  3. Click one of the following:
     • Restart now (to complete the uninstallation of Internet Explorer 10 process and restore the previous version of Internet Explorer).
     • Restart later

• 8600, connected HP says there is a problem but the printer does not work

  I try to use a 8600 e - all - in - one. It replaced a 8500 who has never had a problem with eprint to an email address or as a printer of google cloud.

  With the new printer, when I get it in hpConnected correctly identifies the printer and it's e-mail address. He says he's online. It also gives me the warning sign of exclamation to a printer problem. When I click it says that there is an unspecified error and see the front panel of the printer. No error on the front panel of the printer.

  If I send print jobs via the address hpeprint, it works every time.

  Because hpConnected said that there is a problem: the page of the google cloud reports that the printer is offline.

  Connection is complete Hughesnet, so that might be a contributor to the problem.

  I finally solved this problem. I reinstalled an old Windows laptop-based printing software and now hpConnected said there is no problem. It's strange because the printer is not physically connected to any PC. It is wireless only.

  To solve the google cloud printing problem, I disabled the Web Services and then reset the default wireless property. When I went through the Setup Wizard again, it gave me a new code of acceptance. I got to hpConnected and then added the printer to the Google Cloud Print/HP dialogue page.

  Now, things work as expected.

• I can't print anything I have a window saying, the coil of the printer does not work

  I had a recurring problem with random periods where my printer does not print and I get a message saying that my printer spool does not work.  How can I fix it?

  Hi LoraSwander,

  · What is the number and model of the printer?

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed?

  · What is the full error message that you receive with the error code as appropriate?

  For now, try to run the fix it from the link below and check off the results: printing problems and printing errors: http://support.microsoft.com/mats/printing_problems/en-us?entrypoint=lightbox

  With regard to:

  Samhrutha G S - Microsoft technical support.

• OfficeJet 6600: access code to the printer does not work

  Hello

  My printer used to be connected to my computer. The computer must be repaired, and I don't have the software to print on it. I downloaded it and I thought that I had everything set up, but when I try to connect my printer to the laptop computer he asked the password that I entered, and it isn't right now. It is also connected to a Windows 7 and works very well with this one.

  Hi @camicam,

  Remember that the password is case-sensitive. If you have not made any changes to your wireless password and you are unable to connect the printer to your wireless network, I suggest communicating with your router or your ISP (Internet Service Provider).

  Thank you

• The printer does not work with windows 7

  Just bought a Samsung R480 today and discovered that my existing printer is not compatible with it. The Setup disk only works with Windows XP and Vista. Samsung R480 running Windows 7 at the moment.  I was also considering changing my desktop computer for Windows 7 as well.

  So my question is, is it possible to request an another HP installation cd that is compatible with Windows 7? Or I have to buy a new printer that is compatible with Windows 7?

  Thank you!

  The link below should show the selection of OS for the drivers of J4680c. just click on what version of Windows 7 you have (32-bit or 64-bit), then download it the driver full of features.

  Pilot J4680C

• I have a new router and the printer does not work. I have the hp photosmart c4795 all-in-one.

  What should I do to get the router to recognize the new router

  It's working now. I deleted my printer, downloaded the software from HP and added the new printer. Followed the instructions and it is running. Thank you

• Tecra A4: F10 buttons flash, then the keyboard does not work

  Dear Toshiba support,

  After having traveled often with my laptop Toshiba Tecra A4, the F10 key flashes, some keys don't work and a pop-up said that you hold down CTRL when I'm not.

  I don't know if the keyboard needs replacing or the card mother of m.
  It's a laptop wonderful workaholic, if prefer to fix, but do not know if it is a repair of Office of the keyboard or the mother.

  Everyone knows similar and can suggest a remedy?
  All the tips and suggestions appreciated.

  See you soon,.
  Colin.

  Hello

  Have you tried to press CTRL once more to see if you can disable this?

  To be honest it of not easy to say what might affect the functionality of the keyboard but it might be possible that the keyboard starts to failures

  In this case it is sufficient to replace the keyboard.

  But the fact is that it is only a hypothesis.
  Maybe it's better to check the old s first keyboard (it's a work of technician) before buying a new.