Tecra A4: F10 buttons flash, then the keyboard does not work

Similar Questions

• using firefox 24, yahoo toolbar disappears and the keyboard does not work on some websites

  We have installed firefox 24, yahoo toolbar sometimes disappears. On some web site when trying to enter a password, the keyboard does not work until you double click of the mouse on the registration form. This on two different systems of windows 7. Each thin seemed to work fine before the update prior to the installation of 24.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  I hope this helps!

  Curtis

• Satellite A300D-126 the keyboard does not work

  I reinstalled the driver but it still does not. What could be the problem? Help please. Thank you

  Hello

  What s wrong exactly?
  You have reinstalled the drivers?
  What drivers do you mean?

  The keyboard driver is part of the Windows operating system and it cannot be reinstalled separately.

  If your keyboard doesn't work properly then either the software doesn't run as it should, or the material (keyboard) is defective.

  You could try reinstalling the operating system using the Toshiba HDD recovery to check whether the problem is related to the software.
  If the keyboard does not work after this procedure, then a hardware problem might be possible.

• Key on the keyboard does not work in firefox box when you type in the web site, but it works everywhere else?

  Key on the keyboard does not work in firefox box when you type in the web site, but it works everywhere else?

  Try Firefox SafeMode to see how it works there.
  
  A way of solving problems, which disables most of the modules.
  
  (If you use it, switch to the default theme).

  • You can open the mode without failure of Firefox 4.0 + by pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  • Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

  Do not choose anything at the moment, just use 'continue in safe mode.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

  If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

  Can be caused by an add-on to the AVG.

  When find you what is causing that, please let us know. It might help others who have this problem.

• Satellite W30T-A378 from - touch pad and the keyboard does not work

  I have a problem with my laptop, the touch pad and the keyboard does not work.
  Can someone help me what is the possible cause?

  Thanks in advance.

  Hello

  I guess you checked if the Tablet has been properly connected to the docking keyboard.

  Have you tried to unplug and plug the docking again?
  Note: there is a latch on the left you have to move and in order to remove the tablet.

  Perhaps there is a connection problem.

• Portege R100: the keyboard does not work

  I am facing a problem. My laptop keyboard does not work. How can I purchase a new Panel of key for this model, or how I can fix the problem.

  Hello

  I put t know what is wrong exactly with your keyboard, but I guess the keyboard needs to be replaced.
  To my knowledge the keyboard was fixed by 2 screws under the thin cover above the keyboard.
  You must remove the thin cover and then the 2 screws.
  Then, you will be able to set the keyboard.

  But be careful; the keyboard must be connected with the flat cable to the motherboard.

  Compatible keyboard, you can order from the Toshiba service partner in your country.

  Greetings

• MacBook pro a key on the keyboard does not work

  Hello

  Last day I was cleaning my keyboard (I do not used any water or liquid), and when I handed the keys, I found that my 'enter' key does not work.

  I think it's because that material because the key does not work even without the key cover. Is it possible that I have demaged some buses on the baseboard of the keyboard?

  In addition, I can not open Apple Diagnostics, and while I turn on my macbook it produces sounds like that I am button constantly some.

  -Make an appointment at the Genius Bar to an Apple store to discuss your options.

  Shop Apple Store - Genius Bar

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Equium M50-235: the keyboard does not work after upgrde memory

  I just did an upgrade memory on my laptop using the second slot located under the keyboard.
  However, as I was putting the keyboard at the rear, the ribbon cable has pulled away from the motherboard and even if I pushed
  Reconnect and fixed with the clip, the keyboard no longer works.

  Is there a service manual I can get hold of someone know what could be the cause of the problem?

  Thank you!

  Hello

  First of all, once you unscrew the keyboard, open the clip that secures it in place and reinstall the keyboard by ensuring that it is completely down. After that, now the flat cable in place, close the clip. Then, make sure that it is not lost and that it is seated correctly. Then turn on the laptop and see if it works. If this is not the case, try an external keyboard. If an external keyboard does not work, the keyboard on your MB controller is dead and you need a new MB. If an external keyboard works then your keyboard is dead, or the connector on the MB is dead. Best way to test is to try the first solution. If it doesn't work, take it to an ASP so they can try another keyboard for your laptop. Good luck.

• I forgot my admin password, and the keyboard does not work in another POS user why?

  My keyboard does not work when I connect to the guest account. And also I forgot my admin account so I can't do anything.

  For your connection problem, see a guide to recovery of lost password Windows 7 Home Premium account user, can't connect, connection problem

  Him begins the article with some basic steps you can take and then work upwards through more complicated methods where the easiest do not solve the problem. Please read the intro, but I think it will be the 8 method which solves your problem. Follow the precautionary measures later in the thread as well.

  You could be up & running again within an hour, probably less.

  If you have any questions, post it here; I'll keep an eye on your question.

• After showing the keyboard does not work protected void paint (Graphics graphics)

  Hello

  I am facing a big problem. Need your help.

  I've implemented TouchEvent and VerticalFieldManager-> screen paint().

  TouchEvent works well. But the paint method is confusing after the virtual keyboard is displayed.

  My code is as follows:

  public MyScreen extends MainScreen {
  
      private VerticalFieldManager vfm = null;
  
      public MyScreen() {         super(MainScreen.NO_VERTICAL_SCROLL);         vfm = new VerticalFieldManager(Manager.USE_ALL_HEIGHT | Manager.USE_ALL_WIDTH){              protected void paint(Graphics graphics) {                   //paint methods              }         };    }
  
       protected boolean touchEvent(TouchEvent event) {         if(!event.isValid()) {        return false;   }         if(//Check touch conditon) {               //Do something               return true;         } else {               return super.touchEvent(event);         }     }}
  

  You can correct code above?

  This method of paint does not work after showing the keyboard.

  Thanks in advance.

  Thanks for your reply. Guy.

  I found my bug. This problem is related new instance in my code.

  If the keyboard does not at the present time, it seems that the screen height is decreased by the height of the virtual keyboard. It must be calculated in your code.

• A key on the keyboard does not work properly

  Hello

  I have a problem with my keyboard:
  One button of the keyboard doesnâ? t working properly: I want to write a vowel with an accent (as in French and Spanisha? ¦), but if I press the button obtained, then the vowel, the vowel, and TWO dashes (a´a´) appear: a´a´i. normally, it should automatically be a focus on the top of the.

  I tried another keyboard, but Ca? s the same problem when I connect it to my laptop. I also tried to choose another language as the French and Spanish, where they have accents, but it still doesnâ? t work.

  It would be great if someone could help me.

  Thank you very much
  Hanna

  I agree with Weezle. In any case, I have no much experience with it, but I think that some symbols do not appear automatically if you close button only once. There must be something.

  Try to find some information on the pages of Microsoft. This question is not associated with Toshiba.

• Sam 5005-S504: unit PIF and the keyboard does not work

  I wrote a little water on the keyboard and now the PIF to computer when you are connected to Windows and the keyboard don't work (except F1 to F12). The touchpad works very well.
  Please, does anyone know how to open the computer and how disconect the keybord?
  Or maybe someone has another idea to solve this problem.

  Thanks in advance

  Laurent.

  Hello

  I m not very familiar with this laptop, but I think you have to remove a cover of detroit that is placed close to the display cover. There you should find the two screws that hold the keyboard.
  But if you're not 100% sure how to remove the keyboard, then you should ask the ASP for the detailed instructions.

  Good bye

• Half of the keyboard does not work

  Dell Inspiron 2200 laptop. Windows XP

  On my laptop, the keyboard started to do funny things. First of all it would be bouble type a few letters. Then, almost half of these on the side right of the keyboard has stopped working. (Does not: 9.0,-, o, p, [, l,., /]) I installed two new keyboards (from two different vendors, however made by the same manufacturer in China), no change. The technician of Microsoft in India couldn't help either. Any suggestions?       Mike

  Hi Mike,.

  1. have you used a wired or wireless keyboard to check the question?

  2 are you able to use other usb devices?

  If you used a wired keyboard, then try to use a wireless keyboard and check if the problem occurs.

  You can also try to check the keyboard on the screen and if the problem persists.
  For more information, see the article:

  HOW to: Set accessibility features for People with Motion Disabilities in Windows XP

• HP dv7-3085dx power light flashes, but the laptop does not work.

  Hello! I have a HP Pavilion dv7-3085dx. It has a hard drive Bay 2.

  Recently, I bought the caddy + cable kit and an Intel SSD. The thing is, when I plug the sata cable to the motherboard for the laptop, and the SSD to it, the laptop does not light. When I press the power button, it flashes once (the power LED flashes once), but the laptop does not light. When I press again, nothing happens.

  I tried to remove the power supply plug, battery and plug it all again, but the power light flashes once (when you press the power button) and no reaction.

  Maybe it's the sata cable: when I remove the new cable and connect the SSD with the sata cable on the 1 hard drive Bay (the cable supplied with the notebook), it works fine. The laptop starts. And when I connect the former sata cable, with the SSD on the second hard drive Bay, it also works.

  I just want to now what is the flashing light means light? Why it does not work with the new cable?

  Thanks in advance! Sorry for my bad English...

  Emilio.

  It is possible that this is a problem with the kit. I would recommend to download and install the latest BIOS update for your laptop, using the download at the following link: http://goo.gl/rbHkg

  If it still doesn't work after that, I would recommend to suppress the kit for a replacement or to try another.

• After repair, the keys on the keyboard does not work

  I spilled something on my laptop keyboard and now some of the keys do not work. How can I fix it? Is there somewhere I can just take my laptop to get it fixed or should I send to the filing of toshiba? IM really confused about what to do, advice or information are greatly appreciated.

  Hello

  You must go to a Toshiba service partner. You can search this site:
  http://EU.computers.Toshiba-Europe.com
  under Support & downloads, locate an authorized line

  Good bye