Routing changes? New route not respected

Similar Questions

• Router not found - EA6500

  I'm configuring my settings of connectivity on my E6500. I type 192.168.1.1 and the logon screen comes up. I tried signing in with my username and password and also disconnect from the internet and the connection the router password. After that I connect, 98% of the time it says router not found you have not logged to your router. It's funny told me that since this Web page is provided from the router because I unplugged the internet. Even with the internet, it does the same thing.

  The time it loads the home page of the router, I click on connection and when it comes to the top, the page is just blank with buttons Ok, cancel, and apply.

  I did a reset on the router and it reconfigured with the CD and tried everything above again and same results.

  I don't remember which is a problem when I first set up the router, it seems that a new firmware has been installed automatically. I see no any info on what is a known problem with the latest firmware. Everyone knows about this problem?

  How you try to connect? 192.168.1.1? MyRouter.local? or www.ciscoconnectcloud.com ?
  Try to repair the connection to your computer or empty the cache of Dns resolution or the cache of the browser.

• Windows 2008 Server: unable to update the password. the value provided for the new password does not respect length, complexity, or history of the field requirements

  Unable to update the password. the value provided for the new password does not respect length, complexity, or history of the field requirements

  Hello

  I suggest you to send your request in this forum for better support.
  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• "Gateway router not found" error when you try to connect the TiVO DVR with DLink router.

  Original title: gateway router not found

  try to connect the tivo series 2 to the internet with dlink router that he used to work with previous tivo but not with tivo now, it says gateway router not found
  However, my laptop works fine with the router, I tried tivo support nothing helps, too, if I use the phone line works of tivo, but do not store a lot and is running out of room so it will not work fo rme, helllpppppppp thanks

  Hello

  Where exactly you get this error message?

  See the troubleshooting suggested in "Network error message N07 or C107" steps from this link.

  If you try to connect the tivo series 2 to the internet with dlink router then check out the link below:

  http://support.TiVo.com/app/answers/detail/A_ID/400

  Please contact the manufacturer.

• ipsec0: no IPv6 router not present in the journal

  Hello

  What it means

  ipsec0: no IPv6 router not present in the newspaper?

  I haven't heard that everyone has ever configured ipv6 on my router...

  What continues?

  Thank you

  Miroslaw,

  The message means exactly what he says. There is no IPv6 routers present. By activating the interface a process of Discovery begins looking for IPv6 routers. If none is found you will see this message in the log.

  Are what router you referring?

  -Marty

• Export media does not respect changing the bitrate for H.264

  I have a problem weird etremely where I can't change the bitrate of export for a video in the H.264 format.  In fact, I can't change, but then when I export to adobe media encoder change is not respected.

  For example, I have a video that I exported to 9 Mbps.  I would like to reduce the file size of coding to 6 Mbit/s, so I change settings and re-export however the change is not reflected in adobe media encoder.  Still, it encodes video to 9 Mbps?

  I use Premiere CS4.  Anyone who has ever run into that?  Any help is greatly appreciated.

  Welcome to the forum.

  You want to encode using CBR?  If so, change the bit rate for bit rate target in the VBR settings, then switch to CBR.  This should work for you.

  -Jeff

• Google says that Thunderbird does not respect safety standards. They specficly the list, Thunderbird and MS Outlook. Will there be an update that resolves this problem?

  I tried to have thunderbird connect and download email from one of my google accounts. I kept getting errors of password, then one email from Google on another account, telling me that this account has failed. partial quote below. They indicate that Thunderbird no longer meets modern safety standards. Will there be an update that will fix this?

  Quote and links of google with details about the new security configuration. --------

  Hi Bruce,
  

  Recently, we have blocked an attempt to connect to your account [...].

  Connect attempt details
  Date & time: Tuesday, February 3, 2015 02:54:40 UTC
  Geographical area: New York, USA.

  If it was you
  You can switch to an application made by Google like Gmail to access your account (recommended) or change your settings to https://www.google.com/settings/security/lesssecureapps so that your account is no longer protected by modern security standards.

  For more information, see https://support.google.com/accounts/answer/6010255.

  There may be an update, it is highly debated. "modern safety standard" Google are trying to force all power is a web standard not a standard mail. To work properly, the application should act as a browser. Something of a security problem for an email client that is not a browser.

  They mention Outlook or Thunderbird, as they are the soloists. The truth is there is not an email on the planet other than Google apps web client in a browser or on a mobile device that meet the standard. Want your Yahoo or Hotmail account to collect your messages to Gmail... No, they are less secure and in this function. Wish that Google can use to retrieve the messages of others... wow they use the less secure approach to POP and IMAP with password authentication.

  But Google now have your phone number to add to their gold mine limited personal information to serve adds with.

  The bottom line is to enable less secure apps. They are in line with standards applications. They are not less safe, they do not respect arbitrary authentication standard Googles.

• Placement order w/1340 vNIC B200M4 not respected when you spend 6 to 8 or more NICs vNIC for

  Hello

  I'm running a question when I increase the amount of vNIC on my servers blade 6 to 8 or more vNIC and placement order is not respected.

  Basically the first 3 vNIC and the last are in order, 4 and above his mixed upward...

  This time he stops editing NFS data warehouses as the NFS network cards are associated with a different vSwitch and are some of my other cards

  capture.jpg

  

  I tried the following methods of order placement - all with the same results

  • Let the preform investment
  • Specify manually
    • with and without changing the host Admin Port
  • Investment policy
    • RR
    • Linear order

  I'm running a pool A and B MAC (default = transfer order) and my vNIC A and B have been associated as a result

  I created a new larger pool of MAC and order all vNIC sc_results.php transfer value Sequential, changed to use the new pool of MAC, has created a new SP-model and new SP, asscioated the server - still no success

  Ive updated firmware from 2.2(3g) to 2.2(5b) - unsuccessfully

  Any ideas?

  See you soon

  Mike

  Hello

  CSCut78943

  https://Tools.Cisco.com/bugsearch/bug/CSCut78943/?reffering_site=dumpcr

  Follow the solution according to the bug:

  CSCuv34051

  https://Tools.Cisco.com/bugsearch/bug/CSCuv34051/?reffering_site=dumpcr

  Kindly let me know if theres any query.

  Kind regards

  -SK

• New tab not default Safari in the address bar

  I just problem when opening the new active cursor not default tab(cmd+t) in the address bar. I already have the trial change new windows/tabs open with: empty Page. and uninstall all the extension. He cannot solve this bug.
  OSX: 10.11.4
  Safari: Version 9.1 (11601.5.17.1)

  Try to start Safari while holding down the SHIFT key. Check if it works.

• latest mac change icons does not work

  have the latest version of the software changing icons does not work

  Maurliz51 wrote:

  have the latest version of the software changing icons does not work

  Do you mean El Capitan 10.11.2?

  How are you trying to change the icons? You paste a new icon in the window read the information of a file?

• My iphone 6 s most is having hanged. They said he he's is not replaced. I was wondering how should I confirm that the phone I get is a brand new one not used one?

  My iphone 6 s most is having hanged. They said he he's is not replaced. I was wondering how should I confirm that the phone I get is a brand new one not used one?

  This will be an iPhone manufacturer refurbished in excellent condition 'as new '. You can not change anything on this subject because it's the usual Apple policy on replacement devices.

• moving to the United States to europe and cannot change the country on my payment page of change. new euro credit card. Help, please!

  just moved to the United States to europe and do not know, I managed the change of credit card.

  I can put the new card, but can not change new address outside the United States. not sure that the payment is going to BE true.

  Thanks for the Info!

  Hello

  The country store & the Adobe ID, payment details must be same.

  For tax reasons, it is not possible to change the country associated with an existing Adobe ID. To work around the problem, you can create a new Adobe ID to the e-mail address associated with your existing Adobe ID see the link for instructions:

  Change the country associated with your Adobe ID

  If you wish to contact our support group for assistance, please visit this link: (be sure to connect to adobe.com with your Adobe ID first)

  CC_membership-account-payment-support

• I changed PC but not able Acrobat 9 will not accept my serial key

  I changed PC but not able Acrobat 9 will not accept my serial key. I was informed of this version is no longer supported and I have to buy an upgrade, why if it worked perfectly on my old pc does it work/accept on my new serial key?

  Hi christinec87584091,

  Please try the steps listed in the KB Doc: error "incorrect serial number | Acrobat 9 | CS4

  That might solve your problem.

  Kind regards

  Nicos

• Change the listener not notified when the tree item is deselected

  I attach a listener to the selected index of the view tree selection model property to detect when a user selects or deselects on or other nodes in a tree, but it seems that the listener is not notified when the user deselects a node. So, if a user selects both nodes, and then while holding the CTRL + key deselects one of selected nodes the tree view control deselects the node, but the change listener is not notified. This is a bug or I do something wrong?
  
  I use the GA of JavaFX 2.1 on Windows 7 version.
  
  Thank you.
  Stefan
  
  Import javafx.application.Application;
  Import javafx.beans.value.ChangeListener;
  Import javafx.beans.value.ObservableValue;
  Import javafx.scene.Node;
  Import javafx.scene.Scene;
  Import javafx.scene.control.SelectionMode;
  Import javafx.scene.control.TreeItem;
  Import javafx.scene.control.TreeView;
  Import javafx.scene.image.Image;
  Import javafx.scene.image.ImageView;
  Import javafx.scene.layout.StackPane;
  Import javafx.stage.Stage;
  
  SerializableAttribute public class TreeViewSample extends Application {}
  
  rootIcon private final node = new ImageView)
  New Image (getClass () .getResourceAsStream ("Folder.gif"))
  );
  
  Public Shared Sub main (String [] args) {}
  Launch (args);
  }
  
  @Override
  public void start (point primaryStage)
  {
  primaryStage.setTitle ("Tree View sample");
  
  TreeItem < String > rootItem = new TreeItem < String > ("Inbox", rootIcon);
  rootItem.setExpanded (true);
  
  for (int i = 1; i < 6; i ++)
  {
  TreeItem < String > element = new TreeItem < String > ('Message' + i);
  rootItem.getChildren () .add (item);
  }
  
  TreeView < String > tree = new TreeView < String > (rootItem);
  tree.getSelectionModel () .setSelectionMode (SelectionMode.MULTIPLE);
  tree.getSelectionModel () .selectedIndexProperty () .addListener (new ChangeListener < number >)
  {
  @Override
  public void changed (ObservableValue <? extends number > ov, number oldIndex, number newIndex)
  {
  System.out.println ("selection changed.");
  }
  });
  
  Root StackPane = new StackPane();
  root.getChildren () .add (tree);
  primaryStage.setScene (new scene (root, 300, 250));
  primaryStage.show ();
  }
  }

  The value of the selected index does not change in these cases, because it reflects the last selected index (useful for single selection). It is not weird is possible to get a selected index which is not actually enabled (you can report a bug for this I think).

  However, if you want to keep track of the complete selection, try adding a ListChangeListener to the selectedIndices of the selection model. This one is triggered a change every time.

• ADD A NEW COLUMN NOT NULL

  Hello
  I try to add a new column not null in the emp default table exist. Initially, I created the column (like BONUS) and then I try to apply the constraint in this amended by order. But it does not happen I mean forced is not added to the column as already the column will have NULL values for records existing (or lines). Can someone help me how to solve the problem?
  
  Thank you and best regards,
  Vishnu.

  first disable constraint...

  ALTER table dept change the ur_constraint_name disable constraint;

  then insert the data can

  ALTER table dept change the ur_constraint_name novalidate constraint;

  then

  ALTER table dept change enable NOVALIDATE constraint ur_constraint_name;

  Try this we can help