ROWNUM returns which you would naturally expect when it is used with an ORDER BY on a very large result set?

Similar Questions

• iPhone 5 s, iOS 9.3.4 is very HOT when it is used with CARPLAY?

  iPhone 5 s, iOS 9.3.4 is very HOT when it is used with CARPLAY?

  Attempt to use iPhone 5s in 2016 GMC Sierra.

  The iPhone apps seem to work, but the phone gets very HOT.

  Same iPhone and GMC using only BlueTooth (not CARPLAY) works and is cool.

  Any suggestions?

  I have read reports on older iPhones running hot because of the processor being exceeded. Might be better if you checked him into an Apple store to be on the safe side.

  http://www.Apple.com/retail/Geniusbar/

• Qosmio G20 has white LCD diplsay. OK when it is used with screen external en

  I hope someone can help. Qosmio G20 has full white LCD.
  The backlamps are on and the laptopworks fine when used with screen external fr.
  I guess it's probably the motherboard, any ideas?

  Most people would say that if it worked, say, a couple of days and you can't even start on your LCD screen, then the screen or its cable or mobo circuit feeding the LCD failed.

  I had this on another laptop too, and Toshiba are not something so special that this kind of thing is not generally a valid diagnosis.

• Text captions do not appear when it is used with text entry areas (C3)

  I'm building a simulation of accounting system where the learner needs to enter data.  I entered text boxes (one per blade) appearing all the time on the slide.  I have captions that tell the student what to enter, but are synchronized with the audio, then a final text legend who told them how to go to the next slide (press tab, etc.).  My problem is that the text captions do not appear if they are configured to appear after the text input area appears on the time line.  Has anyone experience this problem?  Any suggestions?

  We have created a work around using a highlight box where the text entry box will appear later - so that all the text captions and text entry boxes appear at the same time.  Should be an easier way!

  Hello

  Yes, we see this question over and over again. Especially with new users.

  You need to come to terms with the works of Captivate. Imagine it's like a stream flowing by. Expect a legend to appear, but something stopped the flow. Blocking is your text box for entry (TEB). He interrupts the slide, waiting for your user to enter data.

  The key here is that you need to adjust the point break for ETB.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• How do you get mahjong challenge when it is blocked with a gray triangle

  I did happpy playing mahjong challenge now firefox has blolcked with a gray triangle and I can not play...

  Do you have this occur suddenly in the middle of the room, or it works in Firefox 39 was and stopped working in Firefox 40? The reason why I ask is...

  There is a problem with some Flash games does not not in Firefox 40. To see if the game you are playing is affected by this issue (asynchronous loading), you can try this modification of the parameters:

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste the IPC and pause while the list is filtered

  (3) double-click the preference dom.ipc.plugins.asyncInit to change its value from true to false

  I don't know which begins to take effect immediately, or if you leave Firefox and start it again.

  Please let us know if that makes a difference with this game.

  Background information on this topic: https://developer.mozilla.org/Firefox/Releases/40/Site_Compatibility#Plug-ins

• Forces, which I would give to be able to use OEM?

  Hello people,
  
  I have oracle connection as sysdba and I create a user. I want to use Oracle Enterprise Manager (OEM). By default it can not use OEM so that grant should I give for this? or should I do something else without subsidies?
  
  Thank you very much.

  Your question is vague.

  You do:
  (A) created a user on Server OEM and want to allow this user to monitor databases through it? Use the link provided by sb.
  (B) you created the user on the target database and want to login/monitor using this user? Grant the user of the OEM_MONITOR.

• IKM SQL file Append-controlled fails when it is used with the Scheduler

  Hello
  We have an interface in our package where we use IKM SQL file Append-controlled. It is supposed to do an insert/truncate a local file destination. This step fails with the error 7000 run with the Scheduler. Looks like some sort of permission error.
  When the package is run manually (in the same location as the Planner), he runs this interface successfully.
  Any suggestions?
  Wwhen the IKM research, it does not say that the "target file must be physically accessible by sunopsis agent." The file is local to the server running the Scheduler; by operating manually also, it is run from the server.
  This is the error to "truncate": step
  7000: null: java.sql.SQLException: file not found: \ < filepath > / < Filename > .tsv
  java.sql.SQLException: file not found: \ < filepath > / < Filename > .tsv
  
  Any suggestions?
  Thank you
  Elkaïm
  
  Published by: 784749 on February 1st, 2011 05:47

  HI -.
  Agent ODI connection users that you have provided to the service Windows ODI. If you have not provided one that he would use the native ID (one that was created when installing the OS I think). If you have not provided any newspaper on before its best to provide to a user that has enough previlage.

  -app

• Hearing sound stops when it is used with the iPhone

  Using sound Linx 2 hearing aids. They are matched correctly with the iPhone (worm 9.3.3). When receiving or phone call, right aid will report the outage battery and closed. Resound app shows the phone id psired AIDS both all-around and IPHONE. Good help is dead unless I open & close the door a few times the battery OR if I do nothing, the 'start-up' bongs departure once a period of time and assistance is working again. Same scenario will happen if I'm lonely playoing on iPhone. Less than a minute the right help will give its battery failure and close. These problems have existed at least two previous versions of the software on iPhone. Does anyone have any ideas or suggestions?

  There could be something in this article to support that can work for you > use to aid hearing - Apple iPhone supported

• Apex 5.0: tabs do not work when it is used with an iframe

  Hello

  The tabs work properly in apex 4.2 but in apex 5.0, they do not work when you use an iframe that display a different application page.

  Here's the demo:https://apex.oracle.com/pls/apex/f?p=86330:1

  Question: click the page tab 2 then click on the Home tab. The problem here is that at home, he goes to the Home tab.

  Can someone help me on this please.

  Thanks Advance!

  2722501 wrote:

  Please download the demo app here (home page) and import it into the workspace you:

  https://Apex.Oracle.com/pls/Apex/f?p=86330:1

  I installed and it works now

  https://Apex.Oracle.com/pls/Apex/f?p=49257

  I just change the following line of code in your iframe:

  Why you must pass the session of 1 application to another application when you go to the page of connection only?

  -Sunil Bhatia

• Sound of wind - what ear canal headphones $30 that you would recommend?

  When I go out to walk, there is a hill which is usually windy, so I want to buy headphones ear canal to solve the problem of noise from wind...  Sony headphones that I use currently are the kind that sit in the ear but don't go into the ear canal, and the wind noise is terrible.

  My requirements are:

  1 frequency response flat without course focusing on the bass.

  2. comfortable in the ear canal.

  3 Symetrical cords for both ears.  I can't stand the asymmetrical cords that put all the weight of the rope on one ear, and loose the cable to the other ear thongs around my face when walking, especially in the wind.

  4. no volume control in the rope that just adds weight to my ears.

  5. No cords running with extension like the Sony MDR-EX75 has.  The EX75 has a Plug and the plug of the cord to connect the power cord runs in a device, cuff and an extension to plug in a device size or Pocket.  The plug and the socket just adds extra cord weight when it is used with a rocket or my size mp3 player.

  Any suggestions?

  Thank you

  Sky

  Hi PolloLoco,

  I wasn't able to find the Meelec HAVE-M9 on amazon, and since I ordered everything from there, I wanted to buy headphones from amazon also.  I checked head - fi.org by your link and you are right.  It contains a wealth of information on headphones.

  For beginners like me, head-fi site has a thread that explains everything you always wanted to know about memo in the ear, also called in-ear monitors (IEM).  I found the EMP of cushions of Air of JVC-HAFX66 through this Web site.  I found also a youtube comment that shows the construction of the HAFX66 and how it seems that inserted in the ear.  Here is the link:

  http://www.YouTube.com/watch?v=V8PRU6tI3_k

  This video shows the FX66 has symmetrical cords.  An important part of the FX66 is actually a soft material that fits into the outer ear.  It is the function of "air cushion".  The air cushion is supposed to also reduce the noise of the rope in the ear that is going to be great because I will mainly use them all by running the exercise.  From the looks of the FX66 in the ear (in the youtube video), it seems the cushions of air could also help block the wind which is one of my major concerns.

  The HAFX66 sells for $19.58 on amazon which is quite cheap to take a chance on them.  The reviews on amazon are very good with the smallest number of negative comments (percentage wise) compared to all the other IEMs I checked on amazon.

  Thanks a lot for your help.
  Sky

• When should I use the IRIS PRO that came with my 8600 instead of the built-in OCR scan-to-text?

  I just bought the Premium Pro 8600.  I installed the HP software, that gives me an OCR option for scanning.  I also installed the second disc, IRIS PRO, which is OCR, too.  When should I use each?

  I would use the software OCR supplied with the printer during the formatting of the document to be scanned is simple and use the IRIS PRO when the formatting is more complex.  You should expect some distortion of the two programs well formatted.  Hope that helps.

• What tablet do you use with creative cloud / Apps?

  Hello, I am looking for a Tablet run creative Cloud applications. Someone has to have the experience? Comparing the iPad 2 air in the Galaxy and possibly the Surface Pro (... but the Surface which enters a different price range). This would complement my current office / workflow of the laptop.

  Thank you! Dave

  If I had the choice (and the money), I'd probably go with the Pro Surface or the Surface next, 3 (a conscious version of their budget to the Surface Pro). It is thanks to the support of office full app like Photoshop CC and full access to your assets on creative cloud. You would pretty much mirror your desktop experience with a little less power and mobility.

  I use a Google Nexus 7 2013 myself; It is perfect for what it is (like most devices from Apple and Google) and designed for her as Photoshop Touch apps are great on this subject. There is just one problem: it isn't Photoshop desktop.

• Sizing when displaying questions size with mobile device

  I have problems with Muse resizing my site when it is used with a mobile device. He cut the left and right sides for some reason any and I do not know the reason.

  Here's how it should look like the base normally. It is at a resolution of 1024 x 786

  

  This is what it looks like on my iPhone 5 (note that cut the sides) -here, any help would be GREATLY appreciated. Thank you guys!

  

  The cause of this is because your content is located beyond the left edge and right side of the page in Muse. Please see screenshot below.

  

  See you soon,.

  Vikas

• I would like to ask how can I do a massage of automatic return, I'm currently not available when vecation, travel bussines... Thank you

  I would like to ask how can I do a massage of automatic return, I'm currently not available when vecation, travel bussines... Thank you

  If this fix your problem, please mark the thread as "solved" Please?
  Thank you.

• Shouldn't be using WITH return the same results as if you would first put the results in a table?

  First of all, here is my version info:

  BANNER

  --------------------------------------------------------------------------------

  Oracle Database 11 g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production

  PL/SQL Release 11.1.0.7.0 - Production

  CORE Production 11.1.0.7.0

  AMT for HP - UX: 11.1.0.7.0 - Production Version

  NLSRTL Version 11.1.0.7.0 - Production

  I just re-read the documentation of the subquery factoring clause of select again and I saw no restriction that applies.

  Can someone help me understand why I get different results?  I would like to be able to use the statement that creates spades3, but for some reason it does not work.  However, when I break up and store the last subquery TMP in a table (MAT1), I am able to get the expected results in MAT2.

  Sorry if the example seems a bit esoteric.  I tried to put something together to help illustrate another problem, so it was more convenient to use the same instructions to illustrate this problem.

  drop table mat1;
  create table mat1 as
  with skus as (
    select level as sku_id
    from dual
    connect by level <= 1000
    ),
    tran_dates as (
    select to_date('20130731', 'yyyymmdd') + level as tran_date
    from dual
    connect by level <= 31
    ),
    sku_dates as (
    select s.sku_id,
    t.tran_date,
    case when dbms_random.value * 5 < 4
    then 0
    else 1
    end as has_changes,
    round(dbms_random.value * 10000, 2) as unit_cost
    from skus s
    inner join tran_dates t
    on 1 = 1
    )
  select d.sku_id,
    d.tran_date,
    d.unit_cost
    from sku_dates d
    where d.has_changes = 1
  ;
  
  
  drop table mat2;
  create table mat2 as
  select m.sku_id,
    m.tran_date,
    m.unit_cost,
    min(m.tran_date) over (partition by m.sku_id order by m.tran_date rows between 1 following and 1 following) as next_tran_date
    from mat1 m
  ;
  
  
  drop table mat3;
  create table mat3 as
  with skus as (
    select level as sku_id
    from dual
    connect by level <= 1000
    ),
    tran_dates as (
    select to_date('20130731', 'yyyymmdd') + level as tran_date
    from dual
    connect by level <= 31
    ),
    sku_dates as (
    select s.sku_id,
    t.tran_date,
    case when dbms_random.value * 5 < 4
    then 0
    else 1
    end as has_changes,
    round(dbms_random.value * 10000, 2) as unit_cost
    from skus s
    inner join tran_dates t
    on 1 = 1
    ),
    tmp as (
    select d.sku_id,
    d.tran_date,
    d.unit_cost
    from sku_dates d
    where d.has_changes = 1
    )
  select m.sku_id,
    m.tran_date,
    m.unit_cost,
    min(m.tran_date) over (partition by m.sku_id order by m.tran_date rows between 1 following and 1 following) as next_tran_date
    from tmp m
  ;
  
  
  select count(*) from mat2;
  select count(*) from mat3;
  
  
    from tmp m
  ;
  

  select count(*) from mat2;
  select count(*) from mat3;
  

  Select count (*) from mat2;

  COUNT (*)

  ----------

  31000

  Executed in 0,046 seconds

  Select count (*) in spades3;

  COUNT (*)

  ----------

  0

  Executed by 0,031 seconds

  Hello

  Khaled says:

  The problem is with

  -case when dbms_random.value * 5<>

  You can change this

  dbms_random. Value (1,100) * 5<>

  and test

  I don't know that I agree 100% with your police department, work there.

  dbms_random. Value, no arguments, returns a random number between 0 (inclusive) and 1 (exclusive), so

  dbms_random. Value * 5< 4 ="" will="" be="" true="" about="" 80%="" of="" the="">

  dbms_randon. Value (1, 100) returns a random number between 1 (included) and 100 (exclusive), so

  dbms_random. Value (1, 100) * 5< 4="" will="" be="" true="" exactly="" 0%="" of="" the="" time,="" which="" is="" not="" what="" op="" wants="" at="">

  The problem here apparently revolves around the optimizer not really call dbms_random over and over again in sku_dates of the subquery.  Add ROWNUM in the subquery seems to force Oracle to assess dbms_random.value immediately.  I don't really understand myself, but adding 1 element in the SELECT of the sku_dates subquery clause could solve the problem:

  create table spades3 as

  with references like)

  Select the level as sku_id

  of the double

  connect by level<=>

  ),

  tran_dates like)

  Select the level + to_date ('20130731', 'YYYYMMDD') as tran_date

  of the double

  connect by level<=>

  ),

  sku_dates like)

  Select s.sku_id,

  t.tran_date,

  -case when dbms_random.value * 5<>

  then 0

  1 other

  end as has_changes,

  Round (dbms_random.value * 10000, 2) as unit_cost

  ROWNUM AS r-<=== new="" column="" added="" here="" new="" column="" added="">

  s SKUs

  inner join tran_dates t

  1 = 1

  ),

  tmp as)

  Select d.sku_id,

  d.tran_date,

  d.unit_cost

  of sku_dates d

  where d.has_changes = 1

  )

  Select m.sku_id,

  m.tran_date,

  m.unit_cost,

  min (m.tran_date) over (partition by order of m.sku_id by m.tran_date rows between 1 next and 1 suite) as next_tran_date

  of tmp m

  ;

  You do not have to refer to this column anywhere; just having him in the subquery is enough.

  If someone can't understand why, I know it.