Rrchcm.sys driver corrupt. Where to download?

I get an error during startup indicating that C:\windows\system32\drivers\rrchcm.sys is missing or damaged.  I can get to a command prompt and verify that the file is there.  I tried to find the driver online but can't find where to download the specific driver.  There is not a restore to return point.

Posts like this are often a symptom of a virus partially blocked or partially deleted.

Download and run the free version of Malwarebytes Anti-Malware http://malwarebytes.org/

If the message persists, run Autoruns of http://technet.microsoft.com/en-us/sysinternals/bb963902 . You can search for entries referring to the rrchcm.sys and disable them.

Tags: Windows

Similar Questions

  • Where to download Windows 7 driver for HP HDX18-1378?

    Hello

    I have clashed with a broken link when I look for driver HP HDX18-1378.

    Where to download Windows 7 driver for HP HDX18-1378?

    Thank you

    Hello

    Try to paste the following link in your browser

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=3979268

    or by clicking this link.

    Erico-

  • where to download a gigaware webcam driver for windows 7

    Does anyone know where to download a driver of gigaware webcam
    for windows 7.
    I remember when I got to my computer but windows used another
    a pilot who has worked with her.
    I just do not remember the name of this driver

    Gigaware webcams are sold by Radio Shack...

    http://www.RadioShack.com/search/index.jsp?kwCatId=&kW=Gigaware%20webcam&origkw=Gigaware+webcam&SR=1

    There is no site Web Gigaware containing support or drivers for your webcam that I can find. You need technical support from Radio Shack.

    Also, I can only find mention of drivers up to and including XP that would be worth zero for Windows 7.

    My advice to you is this. If you want or need a webcam, go out and buy a new one and make sure that your choice is Logitech or Microsoft. Both companies provide excellent support products bearing their names.

    He can't even of 'marks '...

    ------------------------------------------------------------------------------------------------
    I got it thank you guys to work in any case here is how I work
    ------------------------------------------------------------
    1. 1st you download Webcam Driver.
    2 radio Shack PC VGA came pilot
    3. after that, install the Webcam driver in the system.
    4. installation of the Webcam Driver
    5. go into the control panel
    6. click on the system icon
    7. click on the Hardware tab
    8 then click on Device Manager
    9. Select the printer or the unknown device where yellow question marks points sign in this regard.
    10 make a right click on it and uninstall it.
    11. after that go to the top of the Device Manager and click on check for material changes.
    12 installing the driver start the wizard.
    13 brows your driver from the hard drive and click Next.
    ------------------------------------------------------------------------
    Driver will install.
    ---------------------------------------
    I remembered the name of this driver is:
    (Manufacturer of SoC PC-Camera VGA)
    -----------------------------------------------------------------------------------------

  • I just bought a new laptop with Windows 8 is installed. When I try to install my printer, I get an error saying that there is no driver. Where can I download a driver for this printer and the OS from?

    I just bought a new laptop with Windows 8 is installed. When I try to install my printer, I get an error saying that there is no driver. Where can I download a driver for this printer and the OS from?

    Also, where can I find a list of compatible printers?

    I just bought a new laptop with Windows 8 is installed. When I try to install my printer, I get an error saying that there is no driver. Where can I download a driver for this printer and the OS from?

    Also, where can I find a list of compatible printers?

    Hello

    You can use the Windows 8 Compatibility Center to find out if a device is compatible.

    Windows Compatibility Center: find updates, drivers, & downloads for Windows 8, Windows RT:
    http://www.Microsoft.com/en-us/Windows/compatibility/WinRT/CompatCenter/home

    FAQ - Windows Compatibility Center:

    http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/FAQ

    Concerning

  • Windows XP Setup error: the file ohci134.sys is corrupted?

    I was on my computer when my power cut off, and now it used to boot past the Windows XP loading screen, so I inserted the windows disk to run a chkdsk command or a repair, but I get the error: the file ohci134.sys is corrupted. Press a key to reboot the computer. »
    It won't let me access to the CD-ROM to install windows because of this error, and I can not boot past the windows loading screen! He's going to enter the safe mode options but whatever one I choose, it flashes a quick blue screen which says UNMOUNTABLE BOOT VOLUME. How can I fix?

    This is a nice article if it starts your desire to install the as option to start Recovery Console, your system and that you have a genuine XP installation CD bootable that corresponds to your installation.

    Here, the system does not start, there is no installation of the Console recovery and most people either have no real XP bootable installation CD or if they don't have one, it's older than their Service Pack installed.

    Unfortunately, we don't know anything about this system which is afflicted, except that it's a computer that no longer starts.  A little more detail would help, but that's the way things happen here in MS Answers forums.

    I just make a bootable CD of XP (no XP media required) Recovery Console and use it.

    Here's how:

    So, let's start with this:

    The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

    These can cause corruption in the file system that must be fixed before you do anything else.

    If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

    There is zero logic to begin to try to begin to try to modify or copy files to a hard drive that has a corrupted file system, so this must first be fixed using the XP chkdsk program and run chkdsk on your hard drives may solve your problem completely.

    Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

    Boot into the Recovery Console Windows using an XP bootable installation CD.

    If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

    This is not the same as recovery disks that might have come with the acquisition of the system store.

    You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

    The ISO bootable image file you need to download is called:

    xp_rec_con. ISO

    Download the ISO from here:

    http://www.mediafire.com/?ueyyzfymmig

    Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

    http://www.ImgBurn.com/

    When you install ImgBurn, DO NOT install the Ask toolbar.

    Here are some instructions for ImgBurn:

    http://Forum.ImgBurn.com/index.php?showtopic=61

    It would be a good idea to test your bootable CD on a computer running.

    You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

    When you start on the CD, follow the instructions:

    Press any key to boot from CD...

    Installing Windows... going to pronounce.

    Press 'R' to enter the Recovery Console.

    Select the installation that you want to access (usually 1: C:\WINDOWS)

    You may be asked to enter the password (usually empty).

    You should be in the folder C:\WINDOWS.  It's the same as the

    C:\Windows folder that you see in Solution Explorer.

    The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

    For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

    A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

    In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

    Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

    Assuming your boot drive is C, run the following command:

    CHKDSK C: /r

    Let chkdsk finish to correct the problems, he could find.

    It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

    You must run chkdsk/r again until it finds no error to correct.

    Remove the CD, and then type "exit" to exit the RC and restart the computer.

    You have not to set the BIOS to boot the disk HARD since the CD won't be.

  • Help! Windows Vista does not start because of 'ACBRUVI. SYS driver"is bad, can't find my restore points...

    "I tried to post a question on my PC not allowing not windows update to install the latest definitions of security and I don't know there's a virus or a trojan, but before I could get an answer on the forums my computer crashed lastnight and and when I tried to restart, he said that the ' ACBRUVI. SYS' driver was corrupted and contained also the registry as corrupt. So I installed Vista on another partition and I can access the other system files and registry but I tried to restore the registry with a backup I had made using CCleaner, it did not help. I went to the location of the driver (windows/system32/drivers/acbruvi.sys) and it is there, but ranked 0kb. I don't know what this driver is, nor do I have another copy of it on my system. In addition, I lost all my system restore points and do not know how I contracted this problem/virus/worm/trojan horse regardless, but it seems impossible to repair using available like AVG free resources, advanced care and Windows Defender system (Windows defender will not update or another) how can I fix files and the registry without having to reinstall vista on the infected version? I'm at a loss to know what to do? Please let me know what I'm dealing with here?

    Hello
     
     
    This file is not a windows file and I could not find any information on this file.
     
    Method 1.
    To connect from the new Windows Vista partition and run the scan on all drives online.
    I highly recommend to run a Virus Scan online. Sometimes the security program installed might not be fair enough. I also recommend you update your security software regularly.
    a. follow the link below to start the free online scan:
    http://OneCare.live.com/site/en-us/default.htm
     
    b. run the malware removal tool from Microsoft.
    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en
     
    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en
    Method 2.
    If the problem persists, you may need to run the upgrade on site to repair the operating system. Use the upgrade option when you start with the Windows 7 installation disc to run the.
    Reference:
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Cannot boot safe mode or any mode - hangs on the mup.sys driver

    Can someone help me. I did some research on the internet and see that it is a familiar problem. I have been using a usb and someone removed without doing safely - storage key my laptop then froze and the only thing I could do was turn it off at the power button.

    Now I can't do anything - it just goes to several times on the same page saying that there was a problem to choose a way to start - I chose alone and nothing - it loads until the mup.sys driver and then just goes to the same page again. I'm out of ideas.

    Can anyone help?
    I'm trying to avoid the recovery disk that I really want to lose my job yet, but realize that might have to happen, you mind I read reports that it even still hangs when you try this option.

    Thanks Rachel

    Hello

    AFAIK the mup.sys is placed in the folder C:\Windows\System32\drivers and it s responsible for the control and the start-up of the operation of the system at the lower level (control of the printer or the graphics card, etc.).

    If your computer loads all the way up to mup.sys then your HARD drive should work. If he died it would not even charge anything at all. It would not even try to load this file.
    It is likely that this file is corrupted just.

    If you re not able to run the Win operating system and use the System Restore tool, so I put t see any other possibility to use the Toshiba Recovery CD.
    To save important files, you can remove the laptop HARD drive and connect the HARD drive to another computer via the USB interface.

  • Where to download Toshiba Qosmio F20 TV Tuner sweet??

    Where to download Toshiba Qosmio F20 TV Tuner sweet??

    Hello

    If you mean driver TV tuner you can find it on Toshiba download page http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

    This driver offers TV tuning and recording capabilities using Media Center on your computer.

    Good bye

  • Where to download drivers for HP Pavilion 14 n010ax

    Where to download drivers for HP Pavilion 14-n010ax? I need it as soon as possible. :/ I use Windows 7 btw

    BIOS update is nothing more than an update of the firmware of the CMOS chip on the system board. In case if you install an incompatible version or not correctly installed, system does not illuminate. All BIOS versions listed for your download page for the driver for laptop can not compatible. So, need to install updated BIOS if THERE is no problem of compatibility / material specific to your laptop.

    I'll tell you the list of the drivers needed to install in your laptop.

    Driver Audio Realtek High definition (HD):

    http://ftp.HP.com/pub/SoftPaq/sp62501-63000/sp62895.exe

    AMD graphics driver high definition (HD)

    http://ftp.HP.com/pub/SoftPaq/sp62501-63000/sp62893.exe

    ALPS Touchpad Driver:

    http://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64227.exe

    HP wireless button Driver

    http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63752.exe

    Realtek LAN driver (LAN):

    http://ftp.HP.com/pub/SoftPaq/sp62501-63000/sp62896.exe

    Realtek card reader driver:

    http://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64226.exe

    CyberLink YouCam software

    http://ftp.HP.com/pub/SoftPaq/sp65501-66000/sp65795.exe

    For the wireless, there are 3 pilots from different manufacturers listed on the download page, need to try one by one. If the wifi is installed, install the driver of bluetooth even manufacturer that does not exist on this page.

    After installing each driver, restart the laptop and check the status of the driver in Device Manager.

  • has ran DXDIAG can't find where to download Intel(r) HD Graphics (core i3) on windows 7 64 bit

    has ran DXDIAG can't find where to download Intel(r) HD Graphics (core i3) on windows 7 64 bit

    Anyone have a link where I can find the driver update for this im trying to play battlefield 3

    Hello

    In this link.

    Good luck.

  • Is the corrupted Windows 10 download, and if so how can I remove this and re-download the file?

    Original title: upgrade Windows 10

    I have a Dell Studio 1749 under Windows 7 Home Premium.   I postponed the upgrade of Windows 10 to the present day.  The update file appears in the control panel Windows Update Panel, but when I click start it restarts Windows 7 simply and tells me that the new updates have been installed but it was Windows 7 updates since yesterday.

    Is the corrupted Windows 10 download, and if so how can I remove this and re-download the file?    Or maybe another solution?

    Thank you.

    Review:

    Retry the upgrade manually:

    Option 1:

    Download the media creation tool

    Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

    Note: How to check if you are downloaded or installed the update Windows 10 November

    How to create an ISO or USB drive.

    Select upgrade this PC now and then click Next

    Option 2:

    Task of pre-required

    When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

    then

    then

    • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
    • Reboot several times, and then try again.
    • Disable the general USB peripherals (for example - smart card reader).
    • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
    • Perform a clean boot, restart, and then try again.
    • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
    • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
    • If this does not work, try using the. ISO file to upgrade if possible.
    • If you are connected to a domain, go to a local account.
    • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

  • IOPORT. SYS driver

    I have windows 7 64 bit, I'm trying to run CodevisionAVR and I get an error that says I need to have the IOPORT. SYS driver in my drivers folder to run the program, I checked in this folder, it does not exist.  Where can I get the driver?

    Hello

    • Where do you get this error message, it's while installing or running the program?
    • Have been able to use this program before without the error message?

    If you get this error message when running the program, try to uninstall and reinstall the program. You can also look through the article below from the publishers of CodevisionAvr and check if you need any driver or software that contains this file.

    http://www.hpinfotech.ro/GetStart.PDF

    Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software Internet.

    Concerning
    Anthony.

  • Problems caused by the nviddmkm.sys driver

    My computer turns off because of the file nviddmkm.sys (this according to my performance report). The nviddmkm.sys driver has been recently updated, and the problem with my computer began at this time.  I am running Windows 7 64 bit on my computer and don't know how to solve this problem.  How can I uninstall the driver and install one that will work properly?

    Assuming that it is the graphics drivers-
    It seems that the updates of Windows was allowed to update your graphics drivers.
    (the machine does not stop is rare however).
    It is better to setup Windows updates so it does not automatically install from the
    "optional" updates without your approval.
    Never use updates to Windows for graphics drivers in particular and also avoid a recent
    'optional' Update - KB 2670838 - as this will stop some (mostly older) games to launch
    If you are not connected to the internet.

    Download Nvidia drivers from the link below - use only the WHQL.  I suggest using
    the 310,90 vs the newer version, at least for now.
    If your computer is a DELL, HP, etc., it is sometimes better to get the drivers on their website
    for your model of PC.

    NVIDIA Driver Downloads - advanced search

    -In before to install the new drivers uninstall all components of the graphics Nividia
    drivers, including - PhysX, audio HD, 3D and updater - via programs and features.
    -Restart the computer before installing the new drivers.
    -If you continue to have problems doing the same thing again, but after restarting execution pilot Fusion to
    clean leftovers Nvidia graphics driver files.
    -Reboot again before installing the new driver.

    Treexy external page

    .

  • I was looking for where firefox downloads files from the web. Everything I can find is the download list window that has only a clear"" button.

    When I download a file from the web, I want to find it in the Windows Explorer window, but don't know where to look. (I use Windows 7 64 bit on an HP Pavillion laptop) Where is - this Firefox download files that it lists in its own small window of download, but you only allows 'Clear' the list, no copy or open, or move the file?
    Where are the actual files to?

    Map of the last file downloaded and saved

    go to the Tools Menu-> Options-> general-> downloads section-> select Radio button option 1 ' save files from "dialog box-> click the"Browse..."button "and from there you can find the exact folder hierarchy where a download was recorded recently.

    If you want to know when a download starts to download and where you want to save the download, performs the following steps:

    go to the Tools Menu-> Options-> general-> downloads section-> place checkmark on "Show the downloads window when downloading a file"-> check out of "close it when all downloads are finished"-> select Radio button Option2 'Always ask me where to save files'-> click OK.

    Check and tell if its working.

  • Where to download the latest firmware for Toshiba TL938G

    Can someone give me a link where to download the latest firmware for TL938G?
    I want to update with USB

    Thank you

    Hello

    Have a look here:
    http://www.Toshiba-OM.NET/firmware.php

    + The message was edited: link has been removed.

Maybe you are looking for