RTF model - loopback question Word

Similar Questions

• Keep lines together one. RTF model

  Hello
  
  I built a. RTF model in plugin word BI. I have the model grouped by classes. On some leaves of course, the last line printed on the 2nd page. Is there a way to keep the last line on the same page with the rest of the doc? I don't want a single line of text to print on the 2nd page, since it seems disconnected with the rest of the doc.
  
  Thank you
  
  Kelly

  Kelly,
  You have this posted on the website of BI Publisher? In my view, there is a setting to keep them together... See these threads:

  Re: Can you restrict the rows or Stop lines break on several pages in XSL - FO
  Force the two lines to be set on a Page.

  Thank you

  Tony Miller
  Webster, TX

• Page number of reset in Word RTF model for the generation of PDF Editor BI

  Hello!
  Apex Oracle 10.2.0.4, BEEP 10.1.X 4.0.2
  
  I was told to transfer this forum topic.
  
  Bills are created based on the Word RTF with BI Publisher files. Resulting file is a large PDF file, that has a lot of pages.
  Word RTF model is bundled in field BILLS.ID with the page break option. Thus, a BILLS.ID group can have one or several pages (according to the data).
  
  How to create the model RTF (for generation of PDF BI Publisher) with reset page numbers when changing the value of consolidation.
  Page numbers are at the bottom of the page in the format
  curr_group_page/total_group_pages
  where:
  -curr_group_page is the number of the current page group (defined with the BILLS.ID field),
  -total_group_pages is the total number of pages in a group (defined with the BILLS.ID field).
  
  I need to reset the numbering at each change of BILLS.ID (Group).
  Example:
  ID = 1 (4 pages)
  1/4, 2/4, 3/4, 4/4
  ID = 2 (1 pages)
  1/1
  ID = 3 (2 pages)
  1/2, 2/2
  ID = 4 (3 pages)
  1/3, 2/3, 3/3
  etc.
  
  How to achieve this type of numbering?
  
  Any help appreciated.
  
  Kind regards
  Damir Vadas
  
  P. S.
  Have found something like the number of page in publisher bi but I want to get this file on the mail if possible (to see the real value).

  Hello

  Use
  
  to reset the numbering of the pages for sections.

  Concerning
  Angelique

• Merge cells in Excel of the RTF model output

  Newbie question. When I create a RTF model whose primary production is Excel, I usually have a lot of merged cells. Any advice on how to fix that? I almost always prefer my split cells.

  exporting to XLSX

  What export to xls?

  also that there emerged word? where is the same behavior or not?

  as I said

  can not say without looking at it

  can be yes or no

  output image seems strange

  It's may be bug or incorrect model

  Look at

  Generate an Excel output with an RTF template columns and rows of a Table are combined (Doc ID 1590858.1)

• Problem with RTF model with columns > 63

  Hello

  We use the XML editor in Oracle EBS 12.1.3.

  I have a relationship with more than 100 columns, for which I created an RTF model with going out to Excel. I fell on the boundary of Word of 63 columns in a table.  To get around it, I created a table with 2 columns and each column insert a table of columns about 58.

  Well, it seems to work 90% of the time.  But at the end of the excel sheet the last 20 or if data lines have sometimes 58 columns in the column in the external table empty.  The second cell of the outer table is a large cell empty.

  The issue seems to occur when there is a lot of data in the report.  If I run the report on specific lines containing questions the data is displayed correctly.

  Everyone has faced something like this?  Or have any ideas on how to debug what is happening?

  Thank you

  -Johnnie

  Hopefully the new XSL - FO model is selected in the Options tab, when you submit the request. Output XML code usually means - an error (if the program terminates with an error) or the mapping of model not done correctly (if completed normally).

• Can't view the data after loading the XML into RTF model

  Hi friends
  
  I am unable to view data in PDF after loading the XML into RTF model
  After I load the XMl file to my model
  The complement of the tab, I'm trying to get a glimpse of the output as pdf/xml etc, but he throws and error
  Window does not
  'C:\DOCUME~1\SYSNAME~\LOCALS~\APPLIC~1\Oracle\BIPUBL~1\TEMPLA~\tmp\3513518782149421out.pdf214921out.pdf '. Make sure you typed the name correctly and then try again. To search for a file, click the Start button and click Search
  
  I gave the name correctly only, but don't know y it displays error I have to reinstall the Office of Oracle BI Publisher once more please advice me what needs to be done to solve my problem of my PC
  
  Thank you
  Thiliban

  It seems that the problem is with the working directory of the BIP Office.

  If you have administrator access to the computer, please do the following:
  1 Windows-> Run-> regedit
  2. find the value of the next entry
  Publisher\Template HKEY_CURRENT_USER\Software\Oracle\XML for Word\TB_WORK_DIR generator
  3. change your path C:\DOCUME~1\SYSNAME~\LOCALS~\APPLIC~1\ORACLE\BIPUBL~1\TEMPLA~\tmp

  See you soon,.
  ND
  Use the buttons "useful" or "correct" to award points to the answers / mark the thread as answered, if your question is answered.

• Convert model XSL - FO to RTF model

  The report layout I create has strict size requirements (for example, page margins, size of cells and so on).
  I created a simple model of the RTF using MS Word. RTF model meets the requirements of this size, but when I print my report using Acrobat Reader report seems different.
  I know that this happens because when executing BI Publisher report to XSL - FO automatically converts XSL - FO and only after that, he makes pdf.
  
  In order to meet the requirements of thissize I converted my RTF model in XSL - FO stylesheet using Model Designer and changed the appropriate cells and margins etc. manually.
  And everything works fine, but now I know that there will be a lot of changes in the presentation of this report (e.g. several complex tables will be added).
  He left is difficult to me to create tables in XSL - FO. And so my question is
  
  HOW CAN I CONVERT MY STYLESHEET XSL - FO IN RTF WITH ALL LOGIC HE HAS?
  
  BI Publisher version 10.1.3.4
  Thank you.
  
  Published by: Ruslan on 20.07.2011 05:22

  Not at all, you can't come back.

• RTF model error: compilation in the hidden module error.

  I use MS Word 2007 to change my rtf models.
  After installing the patch PS2 for MS Office I can't edit the rtf models more.
  When I try to edit any field in the model I get a message box with the 'Microsoft Visual Basic' header and the message "compilation in the hidden module error: Module_editFF.
  I noticed that the BI Publisher tab is no longer visible in the toolbar. I uninstalled the add-on and reinstalled again, the question remains.
  Any help will be appreciated.
  Thank you.

  If you do not see the BI Publisher tab, then go to MS Word-> Word Options-> Add - ins-> manage-> select Add-ins Word and make so that the "Templatebuilder.dot", TBCrosstab.dot etc. are checked.

  Thank you
  Bipuser

• Stuck in the BI Publisher rtf model for Apex report

  Hi, I work on Express 4.2.3.00.08 and oracle database 11 g application.

  I stuck in the BI Publisher RTF model.

  I want to create a BI Publisher Apex report.

  Question is.... have several activities and several Notes to a significant number.

  Not sure how to put repeating frame so that all corresponding activities and corresponding notes are a major number without repeating.

  Each main number arrive on a page, see the snapshot below.

  I have attached my rtf model snapshot too.

  I'll be really grateful for your help.

  Thank you very much in advance

  

  

  I think your results will have 1102 pages (one page separated by major) for all major XML data?

  You must use @section. so your for each should be as below

  and remove the page break before for each end.

  If you can share the email I can send the updated model.

• Graphic sort BI Publisher RTF model order

  Hello

  Can someone tell me how to sort a table by using the RTF (Microsoft Word) to BI Publisher model generator?

  Thank you

  Check this Advance BI Publisher Concepts - sorting in RTF model

• Problems with highlighting of the rows of the table through RTF-model

  Hello!

  Peace im new in the world of BI Publisher. For the moment, I try to create and RTF-model with the Office AddIn for Word Bi-editeur (2010). I want to create a table based on a table of a pdf document existing already. I have all the data in the right format and order and just worked fine - until I wanted to change the background color of some specific lines.
  If I add that a statement such as

  <? If: Variable = "Expressionstring?" > <? attribute@InContext:background-color;' #FFFF80 '? > <? end if? >

  the context of the evolution of the entry. But the fact the line height. It develops. The expressions more that I use more it grows. That of not good, because the table is so great that it only fits on a single page with fine lines... I tried to apply a height specified in the line through the word, but it does not work.
  I searched a couple hours and still didn't find anything regarding this problem. I appreciate any ideas how to solve this problem.

  Tounsiiaa in advance

  Gabriel

  To help those who have a similar problem: it's just like sfr.farhan.fani wrote. I try to give you a general expression:

  
  

  <? If@row:ROWNAME=VALUE? > (this should work with = > etc do not forget the ' ' for strings etc..)

  < xsl: attribute name = 'background-color' xdofo:ctx = 'incontext' > lightgray < / xsl: attribute > (lightgray can be changed to hexa% and %valeurs)

  <? end if? >

  Hello

  Try the following expression

  5000? >

  LightGray

• RTF model: If condition to test the XML tag exists only on the current XML node

  Hello
  
  I have a RICH model based on an XML file as follows:
  + < invoice > +.
  + < InvoiceNum >... < / InvoiceNum > +.
  + < ShipAddress >... < / ShipAddress > +.
  + < order > +.
  + < OrderNum >... < / OrderNum > +.
  + < ShipAddress >... < / ShipAddress > +.
  + < / order > +.
  + < order > +.
  + < OrderNum >... < / OrderNum > +.
  + < ShipAddress >... < / ShipAddress > +.
  + < / order > +.
  + < / invoice > +.
  
  As you can see, the tag * < ShipAddress > * there are two
  -Sub * < invoice > * = > global shipping address
  -Sub * < Order > * = > shipping address to you for Sales Order
  
  In an XML file, I can only have < ShipAddress > at a certain level, for example
  -the tag * < invoice > < ShipAddress > * appear in XML that if we have a unique address for the invoice
  -the tag * < order > < ShipAddress > * appear in XML that if we have more than one address for the invoice
  
  Logically, in my RTF model, I want to print the address of delivery at the level if one header tag * < invoice > < ShipAddress > * is in XML format.
  I tried a lot of syntax If but none works according to the needs:
  + <? If.: / ShipAddress? > + = > always returns FALSE
  + <? If: / / ShipAddress? > = > returns TRUE when < order > < ShipAddress > exists
  + <? If: ShipAddress? > = > returns TRUE when < order > < ShipAddress > exists
  
  The only syntax that seems to work is:
  + <? If: / / Bill/ShipAddress? > +.
  But I prefer not not hardocde the name of the top-level tag.
  
  Question:
  What si syntax to test the existence of a XML tag only in the current node (recursively)?
  
  Thanks in advance for helping me.
  K.Helali

  ShipAddress for the invoice

  ShipAddress order

• Conditional formatting in the RTF models

  Hello
  
  I'll just with the design of rtf models. I have a question about the function of conditional formatting. It comes
  
  IF I have different types of customers(corporate,individual,etc..) passed as parameters, can, a particular cell be formatted with different colors for different customers. for example, if the setting is undertaken client the the color of a particular cell should be RED in color, and if the parameter is the color of the cell must be GREEN in color.
  
  Please help me with this.
  
  
  Thanks in advance

  Yes, you can conditionally format individual cells.

  Take a look at the guide (link provided) and looking for 'highlighting of cells:

  http://docs.Oracle.com/CD/E10415_01/doc/bi.1013/e12187/T421739T481157.htm

  Code example: 1000? >rouge

  Thank you
  Bipuser

• With regard to the RTF model: enter the commands in your RTF model

  Hi all
  
  
  
  I read the Oracle Documentation saying: "entry of the orders in your RTF model."
  
  
  I tried to look at this one, I have a requirement.
  
  Really how can I enter the commands in RTF model. I didn't get this one a lot.
  
  Any help is very appreciated as always :)
  
  Thank you
  Xavier

  Well, my OPE user's guide did not have the mentioned pages but I watched this guide: http://download.oracle.com/docs/cd/E12844_01/doc/bip.1013/e12188.pdf

  and given the documents, you need just to include controls in a form field in the foreach loop for the element you want to split the document by... You could insert a form field and then double-click the field, go to the properties of Word-> add-> the status bar help text and change the code following the instructions in the guide.

  Hope that helps.

  Bipuser

• How to distinguish the same fields of XML to RTF model?

  Hi friends,
  
  I am using the XML file as a data source and create running in peoplesoft.
  There are two data fields same "DESCR", which are the filling running.
  Now if we run report, second field 'DESCR' shows value of the first field "DESCR".
  
  How to avoid above question, if same data fields in a single RTF model?

  You can have as

  
  

  I think that's what you need.