Run a DLL as an application fails

Similar Questions

• No program will run/launch. Error "the application failed to start because its side-by-side configuration is incorrect."

  Hey guys,.

  So the title pretty much says it all. When I connect to Windows Explorer of my profile does not even start. I have to manually start explorer.exe. I looked through my files and they are still intact, but for some reason when Windows is supposed to be the start nothing runs, making it so that I can't run any of my programs. Someone has encountered this problem before?

  Hi Mark,

  Thanks for posting your query in Microsoft Community.

  This occurs on computers that are not Microsoft Visual C++ 2008 installed.

  Install the latest Windows service pack and all the Windows updates available and check if it has already solved the problem.

  If this does not help, turn off User Account Control (UAC) Windows.

  Open user account control settings by clicking the Start button , and then clicking Control Panel. In the search box, type uac, and then click change user account control settings.

  To turn off UAC, move the slider to never notify it the position, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation. You need to restart your computer for UAC to fade.

  You can also check: What are user account control settings?

  Now download and install one of the following options, depending on which architecture you are running:

  • 32 bit - Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86)
  • 64 bit - Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)

  Note: Make sure that you install only the 2008 version of the Redistributable Package SP1 since later versions.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• use of dll in the mixed in win 2008 application fails, but the same sequences of app in win 2008 r2

  Hello

  Currently we have an application that follows set up, we have a module a [mixed-mode dll] compiled with / CLR Pavilion and we have another module B [native code [exe] which gives access to the module. Application B fails to run on the computer of 2008 victory while the same application runs with errors on a box of win 2008 r2. Its a 32 bit application. The only change that has happened in our env was until recently, we used VS 2008 compilers and so far, the applications ran fine on win 2008 and win 2008 r2 machines. But the application even when it is compiled with VS2010 causes the error to be seen only in a box 2008 victory.

  While trying to identify the issue, I tried to create the sample application that has a dll in mixed mode generated with the/clr option, and the content of the dll is just a global function that is exported by using _declspec (dllexport).

  The other application I wrote uses the .lib, .h and the dll of the module above to call the global function written. When I run the exe of the application fails with the same error. Just to be clear, that the projects are developed using VS2010.

  When I just removed the option/CLR using which is the compiled module the application works fine. Ask you to compile with / CLR, generate a dll in mixed mode is causing problems or if I'm missing some parameters.

  The application even when I came to win 2008 r2 env works fine, I even tried to copy projects to win 2008r2 box and tried to run it and it works fine.

  Please let me know if I could help in this regard or what cud be wrong in the env or if its sth a known issue. Also was wondering if his being caused somewhere in the Ombudsman (thunking).

  Point to note is that control never comes the code I've written, it fails while the modules are loaded even if my observations are correct.

  Here is a log of event viewer when the main application crashed...

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: pscrrun.exe
  Application version: 8.53.0.0
  Application timestamp: 4fcd78fa
  Fault Module name: ntdll.dll
  Fault Module Version: 6.0.6002.18541
  Timestamp of Module error: 4ec3e39f
  Exception code: c0000005
  Exception offset: 00030226
  OS version: 6.0.6002.2.2.0.274.38
  Locale ID: 1033
  Additional information 1: e51a
  More information 2: 4c0d4d78887f76d971d5d00f1f20a433
  3 more information: e51a
  Additional information 4: 4c0d4d78887f76d971d5d00f1f20a433

  psccrun.exe - Application error
  The failed to initialize properly (0xc0000005).

  Thank you

  Kazadi.

  PS: this was already posted in dev/debugger vs MS forum and suggested to post here. [http://social.msdn.microsoft.com/Forums/en-US/vsdebug/thread/70da2119-7d82-4742-9441-c922e0660262]

  Hello

  Your question of Windows 2008 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en/winservergen/threads

• phishing filwhy run a DLL as an app get when I try to delete the old files and the browser cookies each time?

  Why run a DLL as an application encounters a problem and needs to close whenever I try to delete my browser cookies and old files?

  Hello
  Markets or cookies were made that changes in your browser please reset the internet settings for your borwser.

  http://Windows.Microsoft.com/en-us/Windows7/reset-Internet-Explorer-settings-in-Internet-Explorer-9?OCID=ie9_bow_Google&WT.srch=1&MTAG=SearGoogle

  Kind regards
  J Chadnrasekar.

• error message - msnmsgr.exe. Application failed, it should reinstall prposys.dll

  error message reads as follows:-this application failed to start because propsys.dll is not found. Reinstallingthe application may fix this problem. My question is what application is this how I reinstall? It is also at the top of the error message titled msnmsgr.exe.Is that something to do with windows Messenger, because I have a problem with that too.     Thanks in advance for any help you can give me!

  Hello

  Propsys.dll is a file of the operating system. To fix it is it is damaged or missing (or the other can cause this error message), click Start, and then type CMD. Right click on the menu entry that appears and choose "Run as Administrator". From the resulting command line, type:

  sfc/scannow

  and click on to run the file check. When you are finished, close the command prompt and restart the system normally. See if that helps.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Cannot run Quicken 2010, error message: the application failed to start because its side-by-side configuration is incorrect

  Original title: the application failed to start because its side-by-side configuration is incorrect

  I use Quicken 2010 for a couple of years, and suddenly it stopped working with the error in the subject line. I uninstalled the program completely,
  re-installed and got the same error. (I am running Windows 7 64 bit and help Quicken was not particularly cooperative.) So, at the suggestion of someone, I ran a SxSTrace and got the following report, which I find incomprehensible. If it points me to a solution, maybe someone could help me with it:

  =================
  Launch the activation context generation.
  Input parameter:
  Flags = 0
  ProcessorArchitecture = Wow32
  CultureFallBacks = en-US; en
  ManifestPath = C:\Program Files (x86)\Quicken\qw.exe
  AssemblyDirectory = C:\Program Files (x 86) \Quicken\
  Application configuration file =
  -----------------
  INFO: Parsing manifest file C:\Program Files (x86)\Quicken\qw.exe.
  INFO: Manifest definition identity is (null).
  INFO: Reference: Microsoft.VC90.CRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.21022.8"
  INFO: Reference: Microsoft.VC90.MFC, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.21022.8"
  INFO: Resolving reference Microsoft.VC90.CRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.21022.8".
  INFO: Resolving reference for ProcessorArchitecture WOW64.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC90.CRT\9.0.21022.8__1fc8b3b9a1e18e3b\Microsoft.VC90.CRT.DLL.
  INFO: Found no manifesto for the neutral culture.
  INFO: End detection of assembly.
  INFO: Resolving reference for ProcessorArchitecture x 86.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  NEWS: Control strategy of the Publisher C:\Windows\WinSxS\manifests\x86_policy.9.0.microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_f480bfaef65491a5.manifest
  NEWS: Policy redirected assembly version Editor.
  INFO: The Post policy assembly identity it is Microsoft.VC90.CRT, processorArchitecture = "x 86", publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.30729.6161".
  INFO: Start the detection of assembly.
  NEWS: Try to detect manifest to C:\Windows\WinSxS\manifests\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_50934f2ebcb7eb57.manifest.
  INFO: Manifest found at C:\Windows\WinSxS\manifests\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_50934f2ebcb7eb57.manifest.
  INFO: End detection of assembly.
  INFO: Resolving reference Microsoft.VC90.CRT.mui, language = "*", processorArchitecture = "x 86", publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.30729.6161".
  INFO: Resolving reference for ProcessorArchitecture WOW64.
  INFO: Resolving reference for the en-US culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC90.CRT.mui\9.0.30729.6161_en-US_1fc8b3b9a1e18e3b\Microsoft.VC90.CRT.mui.DLL.
  INFO: Found no manifesto for the en-US culture.
  INFO: End detection of assembly.
  INFO: Resolving reference for culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC90.CRT.mui\9.0.30729.6161_en_1fc8b3b9a1e18e3b\Microsoft.VC90.CRT.mui.DLL.
  INFO: Did not manifest for culture.
  INFO: End detection of assembly.
  INFO: Resolving reference for ProcessorArchitecture x 86.
  INFO: Resolving reference for the en-US culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC90.CRT.mui\9.0.30729.6161_en-US_1fc8b3b9a1e18e3b\Microsoft.VC90.CRT.mui.DLL.
  INFO: Found no manifesto for the en-US culture.
  INFO: End detection of assembly.
  INFO: Resolving reference for culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC90.CRT.mui\9.0.30729.6161_en_1fc8b3b9a1e18e3b\Microsoft.VC90.CRT.mui.DLL.
  INFO: Did not manifest for culture.
  INFO: End detection of assembly.
  INFO: Resolving reference Microsoft.VC90.MFC, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "9.0.21022.8".
  INFO: Resolving reference for ProcessorArchitecture WOW64.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC90.MFC\9.0.21022.8__1fc8b3b9a1e18e3b\Microsoft.VC90.MFC.DLL.
  INFO: Found no manifesto for the neutral culture.
  INFO: End detection of assembly.
  INFO: Resolving reference for ProcessorArchitecture x 86.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  NEWS: Control strategy of the Publisher C:\Windows\WinSxS\manifests\x86_policy.9.0.microsoft.vc90.mfc_1fc8b3b9a1e18e3b_9.0.30729.1_none_7dd1e0ebd6590e0b.manifest
  INFO: Start the detection of assembly.
  INFO: End detection of assembly.
  ERROR: Activation context generation failed.
  End activation context generation.

  Good news! After removing and reinstalling the software appropriate to Visual C++.
  Quicken is again functional and, even better, after all uninstalls and installs the last days, my connection to my Bank to download transactions is still in place.
  Thank you

• Lightroom 6 license perpetual error 0xc00007b - the application failed to start properly

  Hello

  I installed 6 Lightroom on my laptop (perpetual license, no cc, machine is a dell win 7 64 bit, Intel core I7, 32 MB memory processor). No problem to install.

  I can't run the program. The message "the application failed to start Oxc00007b - click ok to close.»

  I spent hours searching the Internet for a solution. No way at the moment. Of course, I uninstalled, reinstalled and so on.

  I copied the DLL as suggested in the post from adobe (error: "unable to start correctly (0Xc000007b)")

  I did a windows repair using the microsoft web site

  All other applications work without a problem, including lightroom 5.7 and photoshop CS5

  I have not uninstalled visual c ++ libraries, ignoring it to other uses of the application which version of C++

  I'm stuck with my problem. Could someone help?

  Hi Benoit,.

  In the end, I completely reinstalled Windows 10 and it works perfectly fine. So this is a windows problem

  Thank you for all

  Jean-Paul

• STOP: C0000145 (ERROR of APPLICATION), the application failed to initialize properly (0xc0000005)

  STOP: C0000145 (ERROR of APPLICATION), the application failed to initialize properly (0xc0000005).  Click OK to close the application.

  Occurs when I try to restart my laptop and ends the boot process.

  03/08/11 I get this same error, and I see that nobody has answered it yet. DPR anyone has any idea other than a new image for this problem?

  Rodolphe/Spyware/Malware infection, blue screens don't have an option to click OK to finish or even forget that you can click on anything. If you do not work in safe mode or even last known good configuration you can try a repair installation, but you can still loose data like that. I would just pull the information you need out of the HDD using a speaker and then wipe and start over from scratch. Don't forget to scan your files if you do not import everything using a speaker. However if you can access the mode safe mode with networking, try to download malware bytes and running (don't know how its spelled) it will remove files such as _is27.exe which is a (Rogue.Installer).

• How solve this error message application failed to initialize properly 0xc0000005 on start up

  Hi my name corri I have a computer laptop advent. When I start my laptop it goes to the widowed loding fine screen but then when it goes beyond this point he then goes to this error message

  (application failed to initialize properly 0xc0000005) then I click on ok, then it is once again, then I click ok again then it goes. then after it will theres just a blank screen without icons or nothing... I can't even open Task Manager some can help me please solve it!

  Hello

  You can try the steps below and check if that helps. You need the Windows XP installation CD to go forward with the steps below.

  (a) use the Recovery Console, which is described in the article below.
  http://support.Microsoft.com/kb/314058

  Note: You must make sure that your primary boot device is CD drive - go into the BIOS to ensure, if necessary,

  (b) (b) demarrer start from the Windows XP installation CD-ROM, and then use the EXPAND command, like this:
  Expand d:\i386\wininet.dl_ c:\windows\system32\wininet.dll

  Note: Where d: is the CD-ROM drive

  (c) then type EXIT and when the pc reboots, you should be able to boot XP.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• the Windows defender application failed.

  Hi, when I click to open windows defender, I get the following message, application failed to initialize 0x800106ba a problem caused to stop this service programs. would appreciate any help thanks.

  Start - type in the search box - Services - find top - Right Click - Run as Admin

  Windows Defender - value STARTED and AUTOMATIC

  or set MANUAL and STOPPED if necessary

  spiritx this worked a treat, the defender was on manual for a reason, thanks for the help

• Yahoo messinger does not start, he said: "the application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. » __

  Yahoo messinger does not start, he said: "the application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. »

  UM. I have no idea what that means, I never had that in my 20s I was using a computer.  Please help, someone!

  You can get the Chkdsk to run in the General Windows interface by following these instructions?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking. Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive. If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  Your command prompt Mode works without failure or a boot?

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  It works if you test with another user, you will need to create one to test with?

  System Restore and the System File Checker is able to fix anything?

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (or 7)
  http://support.Microsoft.com/kb/936212/#appliesTo

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
  http://support.Microsoft.com/kb/928228#appliesTo

  Have you tested malware?  I see a lot of recommendations here for programs such as -

  Malwarebytes' Anti-Malware
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntispyware
  http://SUPERAntiSpyware.com/

• If I update to windows 7 it will fix error application failed to initialize properly?

  When I try to open certain programs I get application failed to initialize properly.

  I want to know if I upgrade from Windows Vista to Windows 7 will be the mistake still be there?

  Will he take it?

  Thank you

  Mildred W.

  Hello

  1. Since when are you facing this problem?

  2. don't you make recent changes?

  3. What is the full error message?

  4. what programs you try to run?

  If you upgrade Windows Vista to Windows 7, once again depends on what program you use. If there is a problem with this program, you could get the same question.

  If these programs are third-party programs, so I suggest to uninstall and reinstall once and check to see if the same problem happens.

  Alternatively, you can also try to restore the computer to an earlier point and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  It will be useful.

• Error message: the application failed to start because its side-by-side configuration is incorrect please view log for details application event

  Original title: cannot open programs

  I get this message when I try to run any program on my windows vista operating system: the application failed to start because its side-by-side configuration is incorrect please view log events applications for more details. I can't open any programs or files associated with programs IE Miicrosoft Office), any help would be sufficient. Please make your suggestions VERY user-friendly. Thanks in advance.

  Hi KenKenJr,

  1. are you faced with questions only when you open Microsoft Office programs?

  This error can occur because of a corrupted Microsoft Visual c++ installation.

  Step 1:

  If this error occurs only when you try to open the Office programs, you can check the following link and check if that helps:

  http://blogs.technet.com/b/AppV/archive/2010/06/10/solution-possible-side-by-side-error-when-sequencing-Office-2010-on-Windows-Vista.aspx

  Step 2:

  To resolve this problem, you can also install the latest version of visual C++ according to the version of Windows installed on your computer (32-bit or 64-bit) and check:

  Download and install Microsoft visual C++ from the below mentioned link:

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

  For more information, you can consult the following link:

  http://blogs.msdn.com/b/developingfordynamicsgp/archive/2010/08/20/side-by-side-configuration-is-incorrect-error-message-given-launching-Dynamics-GP.aspx

  Hope this information is useful.

• Defender of Windows Application failed to initialize x 0 80070006. The handle is not valid.

  When I connect to my pc the "Windows defender Application failed to initialize x 0 80070006. The handle is invalid. "appears.
  And then when I go into my control panel and open Windows Defender is the same thing.
  How can I stop this?
  Thank you

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

      

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial:

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this FREE program Autoruns:

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  I have QQ (an international chat program) installed on the laptop. Then my hard drive crashed. Now when I try to reinstall it on my new hard drive I get the following message:

  "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for details" -how can I solve this problem? I have Windows 7.

  Hello

  Thanks for choosing Microsoft Community to post your question.

  It seems that you can not install application QQ, you get an error: "the application could not start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  We're here to help and guide you in the right direction. This problem could be caused when the computer is missing the correct C++ run time for your type of system components. (x 86 or x 64).

  Here are a few troubleshooting steps that you can try to solve this problem.

  Method 1: we will install Microsoft Visual C++ for your computer package.

  Note: If you use the 32-bit operating system, download and install 32-bit edition(X86).

  If you use the 64-bit operating system, download and install edition(X64) 64-bit.

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=A5C84275-3B97-4AB7-A40D-3802B2AF5FC2&displaylang=en

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

  Method 2: Run the fixit available at the following link.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Also, check the event log using Event Viewer.

  Please see the link below for more information on how to use Event Viewer to check the error message or information,

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  If you have additional problems, please reply to this post and we will be happy to help you further.