Run PL/SQL procedures at the same time

Similar Questions

• Execute multiple procedures at the same time calls

  
  HI - does anyone know how run as many procedure calls in parallel without using DBMS_JOB and DBMS_SCHEDULER?  For some reason, we are not allowed to use this feature, so I have to find another way.

  Thank you

  Christine

  JustinCave wrote:

  Without knowing your version of Oracle or why prevents you from using the most obvious tools, it's hard to say.

  If you are on 11.2, you can use the package dbms_parallel_execute but which simply called dbms_scheduler under the covers.  And some restrictions on the use of dbms_scheduler would most likely also create problems for the use of any other approach which had about the same effect.

  Justin

  Unfortunately, according to the doco 11.2 to dbms_parallel_execute.

  To perform the pieces at the same time, the user must have CREATE JOB system privilege.

  A solution could be to move the multi-threading for outside of the database and use the multi-threads of something like Java or C capabilities. You can even do it using the command or a shell script, depending on your environment, but it could be a bit annoying. Overall, the simplest solution would be to convince that the DBA is to authorize the use of a feature standard and well understood by the database called the Planner, rather than circumvent their authority by using external multi-thread techniques.

  Concerning

  André

• Question about running from two cameras at the same time with MAX

  Hello

  I have two cameras attached to NI PCIe-1430 frame grabber card (Atmel Aviiva M2 CL and Fairchild 2 K LS) IRLS. It's ok when I run two cameras individually, but I can't run them at the same time.

  This is the step that simultaneously run two device:

  1. open MAX, select the port and start image acquisition by pressing the 'Grab' button, I can see the image at this point.

  2. open another MAX session, select the other port and press "enter". I got following error:

  "Error 0xBFF60021".

  Unable to perform request; acquisition in progress'

  Sometimes, I got this error too:

  "Error 0xBFF60022".

  A timeout error occurred while you wait for the specified event. If you expect a picture, check the video data is acquired in the period. If in the meantime the signal, check that the assertion of signal has occurred within the period. »

  I already give enough timeout Fame to the tab settings of Acquisition.

  The MAX version used is 4.5.

  You have an idea on that? Makes simultaneous Imaging MAX support?

  Thank you

  -polarfox

  Thanks for the quick response Bruce.

• Is it is possible to always run an earlier version at the same time as Acrobat DC?

  I have plugins that I need that do not work on domain controller. Is it possible to always run an earlier and under Acrobat DC version at the same time? Or should I downgrade to the previous version somehow? And how do I that Creative Cloud?

  Hi dv8kiwi,

  Please note that once you have installed Acrobat DC on your machine, it will automatically uninstall any previous version of Acrobat is installed on your computer.

  You might check out this link to KB doc for more details on the same below:

  Try Acrobat deleted the previous version

  If you still want to downgrade to the previous version, then you will first need to uninstall Acrobat DC and then install the version of Acrobat that you were previously using.

  Please also indicate if you want to install your previous version of Acrobat using Creative Cloud or something.

  Let me know.

  Kind regards

  Ana Maria

• Run 2 processes at the same time the same session

  is it possible to run 2 (or 3, 4 would be better =) stored procedures at the same time trough the same session?
  (something like the parallelism)
  
  I need to so that I do not like the result of the execution, ideas?
  
  I did a stored procedure that does ping to the 400 ip but is a bit slow, I DB a trigger to execute, it is reason to run it "hollow parallelism.

  YAL: http://asktom.oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:4712493580500

• How to run this script on all my hosts at the same time?

  Greetings.  I have this script that tells me that the status of the HBA device path (dead, active).  But it takes forever to run on all my guests, as it does every one host at a time.

  How can I get that it is running on all hosts at the same time?

  Use: Get-HBAPathStatus VMHosts *.

  Thank you!

  Function Get-HBAPathStatus ($InputVMHost) {}
  $vmhosts = get-VMHost $InputVMHost | Name sort

  {foreach ($vmhost to $vmhosts)
  Write-Host "* $vmhost."
  Write-Host "Please wait...". Checking the paths... »
  $hbas = get-VMHostHba - VMhost $vmhost
  $pathStatus = $true
  {foreach ($hba to $hbas)
  $scsiluns = get-ScsiLun - Hba $hba
  {foreach ($scsilun to $scsiluns)
  If ($scsilun - not $null) {}
  $paths = get-ScsiLunPath - ScsiLun $scsilun
  {foreach ($path in $paths)
  Write-Host - NoNewline ". »
  if($Path.) State - eq 'Dead') {}
  $pathStatus = $false
  }
  }
  }
  }
  }
  {if ($pathStatus)}
  Write-Host "
  Write-Host "$vmhost is ok" - ForegroundColor "green".
  }
  else {}
  Write-Host "
  Write-Host "$vmhost death paths." - ForegroundColor 'red '.
  }
  }
  }

  Be sure to use the 32-bit version of PowerShell and PowerCLI with the Start-Job cmdlet.

  Labour will fail with the 64-bit version.

  See the thread disable asynchronous paths for more information.

• function work at the same time that the work can also do procedure...

  pls tel me major diff b/w cursor implicit vs explicit cursor and function procedure vs.
  
  Published by: 955345 on August 27, 2012 22:11
  
  Published by: Rousseau on August 28, 2012 11:08

  Rousseau wrote:
  k k bt

  What does that mean?

  function to do some work at the same time that work also can make procedure... Why work

  Function has the ability to be used in SQL, but cannot be a procedure.

  Basically, I use the procedure for transactional operation and function for Non-transactional operation. For example, if I have to update a table I would use a procedure to wrap my update statement. And if I have to do some calculations or run some select and return a result of Ref Cursor I would use a function.

  In addition to the technical restrictions of function and procedure its more the choices make us.

• where is "allow firefox developer edition and firefox to run at the same time"?

  just update to 41... and now I have cannr run this at the same (time

  You can add - no.-distance to the command line to open another instance of Firefox with its own profile and run multiple instances of Firefox at the same time.

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile
  • https://developer.Mozilla.org/Mozilla/Multiple_Firefox_Profiles

• You can use the activity tracker and an application running at the same time?

  I've been running just with my watch and the Apple activity tracker.

  But I wanted to calibrate so tonight I ran with my iPhone, too.

  I tried to use the Nike + and the PPP of activity both starting on my watch. I ran with the application of the activity on the screen.

  When I did I stopped the activity app and went to the Nike + app, but it was stopped.

  Then can you run the application of activity and a different running application at the same time. Or do you need to start another app on your phone and activity on your watch?

  Thank you all

  Hello

  To save your route at the same time apps, save the workout using the application of the workout on your Apple Watch (early check it there first) and also through the application of Nike + running on your iPhone.

  Monitoring of your training via the integrated application of the watch workout will cause your heart rate to be monitored at all times for the duration of your workout.

  The app Nike + running cannot currently access heart rate monitor watch directly, but if I read the heart rate data of the health on the iPhone app, it will always be able to access - indirectly - the same heart rate for your exercise data:

  -On your iPhone, in the application of health, press Sources (tab) > Running > turn on Allow 'Running' to read heart rate data.

• How to get firefox 4 to allow two separate processes run at the same time.

  I'm used to be able to run two separate processes of firefox and so also run two separate user profiles at the same time as well. But I recently moved to firefox 4 and windows 7 and the other, or these two prevents the old method, I used to work. Basically I was running firefox (via 'run' or via an edited shortcut) with the following executable:
  p - profilename - noremote

  And it would launch a separate process that runs under the profile name. Is it possible to do this with firefox 4 and win7?
  I am a developer (web and desktop applications) and it is highly preferable to do so. One of the reasons is that, if one of the processes one falls, the other is fine. Another is to have separate profiles so that addons with leaks of memory, like firebug, can be run in its own process and I can restart when I have to without affecting other processes. I sometimes also need to set the processor affinity so that a process of firefox is not a big eater.
  Any help would be appreciated.

  The correct format for this command is -no-remote

• Some profiles running at the same time, others are not

  I have three 'profiles' that I use for firefox (a general, a working one and locked). I can load them with the '-p' option on the command-line very well. If no firefox runs, and then one of them works perfectly. So I think I have the basics working properly.

  However, two of the profiles (work and general) does not work at the same time. But that locked will run with either of the other two. I cannot understand why and I'm looking for some clues on the newspapers to activate or to debug levels to raise or parameters to twist inside (or outside) profiles.

  Specifically, by "does not work", I mean that if 'general' profile firefox is running, so if I start my work profile (i.e., "PEI working firefox"), he has just opened a new window on the current general profile. If I open the locked profile (i.e., "firefox Pei lockdown") which appears fine (starts a separate instance of firefox, with its own plugins and whatnot).

  I had this problem for a long time (many version of Firefox, before even the 3.0, I think). I have this problem on Windows (but WinXP and now Win7).

  I am comfortable with tweaking the settings and looking through the logs, but not sure what to activate. Google searches have not been successful (it seems to be relatively few people using Firefox profiles).

  You can get Firefox to run different profiles simultaneously by adding-no option command line remotely and more of the P-

  For more information, see opening a new instance of your application of Mozilla with a different profile - MozillaZine Knowledge Base

• How to run two 'County of buffered edge' using two different counters at the same time?

  Hello

  I try to use two counters at the same time count the TTL pulses for a fixed period (lets say 10 ms). I have the card PCI-6251 and PCI-6601. I am currently using PCI 6601 as counters and running a self updated the ' stamped edge County - reset.VI. Here, I have attached my VI.

  Now, during the execution of this VI, I get an error saying "error-200251 occurred at Task.vi:4 DAQmx Start" and the possible reasons are, "measures: no USB or DMA channels in loose ends are available.»

  Either stop other tasks which might be using these resources or are considering changing your mechanism for transfer of data to the interruptions if supported.

  Device: Dev2

  Task name: _unnamedTask<80>. »

  What I realized is I'm trying to use two buffers for two meters with ten samples each and this is probably not allowed. I don't know how to solve this out and bad looking for your suggestions.

  Thanks in advance.

  Hi all

  I found a solution too. This is the VI updated the "County of edge stamped" which can simultaneously run two entries-meter using a single source of door and it also uses the DMA and interrupts to save two pads.

  Have a nice weekend.

• can I run advance care system and Panda cloud at the same time

  can I run advance care system and Panda at the same time.

  You posted on a forum for users of the software program anti-malware for Microsoft Security Essentials (MSE).

  Advanced System Care is a registry cleaner - we do not recommend the use of such programs in this forum.

  Or we can provide information about the use of the Panda products.

  Suggest that you only contact Advanced System Care Support and Panda support about your question.

• Running two engines step by step at the same time of a port

  Hello

  I have to run two motors at the same time - was used to move a linear ball screw and the other to get a grip. I do voltage and test on small twist wires, but the tension and torsion must be made at the same time. I must also build capacity for each engine to take several steps, IE. have an engine steps number at speed x and then move x number of speed z steps. The two engines must be able to do. However, I have problems to make the engines to run at the same time and to take all measures. The engines are connected to two RMS Technologies R356 controllers. The two controllers are then connected to a RS485 to USB converter card and this card is connected to one of the USB ports on the computer. Currently, I spend an array of orders to two loops each VISA containing read and written. I have attached the vi to watch. All the stuff in the code synchronization is because a new order cannot be sent to the controller until the engine is running the previous command. If orders are sent right after the other, the controller will not execute the first command and then return with an error.

  Does anyone have a suggestion as to what I'm doing wrong?

  Thanks in advance for any help.

  
  

• How to run a window of data acquisition and another pane at the same time

  Hello

  I have a main window for data acquisition and in front panel there are four Sub Vi. When the main window of data acquisition is running and at the same time if I run the Subvi - main window stops data acquisition and the secondary window starts to run. But I want to launch the window of acquisition of primary data and the pane at the same time. Please give me a solution for this...

  Thanking in advance.

  Nikhil

  Hi Nikhil,

  My explanation has answered your question. Take a look at the image as an attachment. Let us know if you have any other questions.