Is it is possible to always run an earlier version at the same time as Acrobat DC?

Similar Questions

• When buying individual images rather than a subscription, is it possible to buy images in a library at the same time, rather than just one at a time?

  When buying individual images rather than a subscription, is it possible to buy images in a library at the same time, rather than just one at a time?

  Unfortunately not - it must be done one at a time.

  Thank you

  Bev

• Question about running from two cameras at the same time with MAX

  Hello

  I have two cameras attached to NI PCIe-1430 frame grabber card (Atmel Aviiva M2 CL and Fairchild 2 K LS) IRLS. It's ok when I run two cameras individually, but I can't run them at the same time.

  This is the step that simultaneously run two device:

  1. open MAX, select the port and start image acquisition by pressing the 'Grab' button, I can see the image at this point.

  2. open another MAX session, select the other port and press "enter". I got following error:

  "Error 0xBFF60021".

  Unable to perform request; acquisition in progress'

  Sometimes, I got this error too:

  "Error 0xBFF60022".

  A timeout error occurred while you wait for the specified event. If you expect a picture, check the video data is acquired in the period. If in the meantime the signal, check that the assertion of signal has occurred within the period. »

  I already give enough timeout Fame to the tab settings of Acquisition.

  The MAX version used is 4.5.

  You have an idea on that? Makes simultaneous Imaging MAX support?

  Thank you

  -polarfox

  Thanks for the quick response Bruce.

• Is it possible to have TWO Wordpad files open at the same time?

  It is possible to have TWO working Wordpad files open at the same time?  I tried 'cutting' nothing doesn't.  With Windows XP, it wasn't a problem...

  Thank you...

  Totally forgot the thing to-do bar, you can also a way to click on it to open a new

• Run PL/SQL procedures at the same time

  11.2.0.3 running x 64 on Windows Server 2003 x 64.
  
  I have a PL/SQL procedure that calls a lot of other procedures in turn, i.e.
  

  BEGIN
  
  proc1;
  
  proc2;
  
  proc3;
  
  proc4;
  
  END;/

  With this configuration, proc2 will not start running until the end of proc1, proc 3 won't start until proc2 is finished and so on.
  
  Is there a way to set up so that when I call the current procedure, he begins each additional procedure at the same time? Thus, proc1, proc2, proc3 and proc 4 all work at the same time?
  
  Thank you
  Tom

  Run them in batch? Have proc 0 distributes them all for immediate execution with dbms_scheduler.

• is it possible to load and send php variables at the same time?

  Hello, with this line:
  Request.Method = URLRequestMethod.GET; You can get php variables.
  and with request.method = URLRequestMethod.POST you can send variables.
  
  But is it possible to do this at the same time?
  
  
  

  they send and receive data in order. IE, data are sent (if there are any) and then the data is received (if there is).

• How to run both versions at the same time on a Mac?

  I have a setup of highly personalized FF v42 I'm happy but my Firefox version is seriously outdated and it's time to upgrade. I suspect that a lot of things will no longer work on the latest version (especially some of my old addons).

  To facilitate the transition, I want to be able to run my old version (temporarily to say a few weeks) and the latter at the same time in order to customize a new the same standard and find solutions for everything that is no longer supported, and continue to use my old install/addons until this transition is complete.

  I found this thread:

  https://support.Mozilla.org/en-us/questions/1061740

  but the solution has links that no longer work. I couldn't find anything recent on the web or youtube covering the Mac.

  I understand that the principles will be to:

  1. install the current version to a different location. Is that dragging the .app FF file to somewhere other than the Applications folder or is required as part of the installation?

  2. use a different profile for each installation. Not sure what order to do so that I do not lose my current profile (old). I guess it's to create a new profile, switch to the new profile and then install the current version, which "takes over" the new profile. Then I can go back to the former when I run my my old FF?

  Any help much appreciated.

  Installation of multiple versions on Mac OS X is basically dragging the Firefox application out of the DMG file to the desktop and rename the folder. You can drag the Firefox application folder renamed in the Applications folder as normally install you Firefox.

  You will need to use the Terminal to create a new profile for this version. Make sure that no profile is selected by default for Profile Manager to display when you start Firefox. You can check that in the profiles.ini file.

  • http://KB.mozillazine.org/profiles.ini_file
  • http://KB.mozillazine.org/Profile_Manager

• Cannot run Beta and new version at the same time more? Seriously? !!

  So according to the info in this post closed... https://forums.Adobe.com/thread/1871117

  • ' For users with the beta version: If you have a beta version of the software that is already installed, make sure that you uninstall the software before installing Adobe Muse CC 2015. " "

  So that you guys give a feature that has been requested, have us able to use it for a while now, then - remove him?

  That's why I / we recreate all the work accomplished in our beta versions?

  Why don't you take this account?

  Please tell me I'm missing something...

  Not to mention having to deal with endless rotation CC icon of the desktop app does not connect... and yes I saw the OBE or uninstall hotfixes.

  I love CC and Muse, but sometimes I think that more is bitten that can be swallowed with these huge updates.

  You are missing something... ;^)

  2015.0 Muse has been shipped. It is the newest of the beta builds and can open any file you were working with a beta version.

  Maybe if you describe some trouble or errors you encounter with the help of the final version of 2015.0, we can help you?

• On Plans! [Is it possible to buy the Plan of photography + plan unique App at the same time?]

  Hello world

  Is it possible for me to buy two plans at the same time:

  for example (photographers) and (an application)?

  Thanks in advance.

  Yes both pricing and membership creative cloud | Adobe Creative Cloud

• How to run this script on all my hosts at the same time?

  Greetings.  I have this script that tells me that the status of the HBA device path (dead, active).  But it takes forever to run on all my guests, as it does every one host at a time.

  How can I get that it is running on all hosts at the same time?

  Use: Get-HBAPathStatus VMHosts *.

  Thank you!

  Function Get-HBAPathStatus ($InputVMHost) {}
  $vmhosts = get-VMHost $InputVMHost | Name sort

  {foreach ($vmhost to $vmhosts)
  Write-Host "* $vmhost."
  Write-Host "Please wait...". Checking the paths... »
  $hbas = get-VMHostHba - VMhost $vmhost
  $pathStatus = $true
  {foreach ($hba to $hbas)
  $scsiluns = get-ScsiLun - Hba $hba
  {foreach ($scsilun to $scsiluns)
  If ($scsilun - not $null) {}
  $paths = get-ScsiLunPath - ScsiLun $scsilun
  {foreach ($path in $paths)
  Write-Host - NoNewline ". »
  if($Path.) State - eq 'Dead') {}
  $pathStatus = $false
  }
  }
  }
  }
  }
  {if ($pathStatus)}
  Write-Host "
  Write-Host "$vmhost is ok" - ForegroundColor "green".
  }
  else {}
  Write-Host "
  Write-Host "$vmhost death paths." - ForegroundColor 'red '.
  }
  }
  }

  Be sure to use the 32-bit version of PowerShell and PowerCLI with the Start-Job cmdlet.

  Labour will fail with the 64-bit version.

  See the thread disable asynchronous paths for more information.

• Can I have several pst files open while Outlook is running? I want to have TWO OPEN pst files at the same time. What to do please? As always, thank you

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  I also always wanted something similar, but rather an Outlook that manages multiple profiles , which means that you can check emails, calendars, etc., which exist in separate profiles with only an Outlook application running. For the moment, I have to close Outlook to open a different profile.

  As it is, you can have two instances of Outlook running at the same time, which means that cannot open two independent pst files simultaneously. When you start Outlook, it will always check if another instance of Outlook is still running and happening rather than open a new instance. You can programmatically thwart Outlook in finding that there is no other instance of itself (when it is in fact) and do what you think (in this sense the answer is not impossible), but is not an approved approach and you have trouble of programming or run another application - the end result is messy. Runs also two instances of Outlook can put pressure on resources unnecessarily, especially on memory.

  Perhaps what is required is a feature to Microsoft for Outlook request that can manage multiple profiles simultaneously. If you run this I would sign of course. I'm sure that there is a lot more there.

  I hope this helps.

  samc1

• How to open two PDFs at the same time (for example on two related screens)? It was always possible in the previous version of the Adobe Reader software.

  How to open two PDFs at the same time (for example on two related screens)? It was always possible in the previous version of the Adobe Reader software. Now while one of them is open, I can't open the other, because it is hidden, and I have only shown in the taskbar as a thumbnail.

  Hi ewap51098943,

  You can disable this in the Edit menu-> preferences-> General

  

  Kind regards
  Nicos

• Several profiles to run at the same time

  I'm under view Planner 3.0. I've always been running one profile to run at a time. It was my assumption that was the only way to do this, run run profiles in series.

  Anyone know if it is possible to have several profiles of race running at the same time and if so the warnings for that Setup.

  Thank you

  Pete

  You cannot run multiple profiles running at the same time. Scheduler display harness only supports one profile of running both. If you want to run that many run profiles and virtual desktops are disjoint, you can create multiple instances of harness see Planner and run multiple profiles.

• You can use the activity tracker and an application running at the same time?

  I've been running just with my watch and the Apple activity tracker.

  But I wanted to calibrate so tonight I ran with my iPhone, too.

  I tried to use the Nike + and the PPP of activity both starting on my watch. I ran with the application of the activity on the screen.

  When I did I stopped the activity app and went to the Nike + app, but it was stopped.

  Then can you run the application of activity and a different running application at the same time. Or do you need to start another app on your phone and activity on your watch?

  Thank you all

  Hello

  To save your route at the same time apps, save the workout using the application of the workout on your Apple Watch (early check it there first) and also through the application of Nike + running on your iPhone.

  Monitoring of your training via the integrated application of the watch workout will cause your heart rate to be monitored at all times for the duration of your workout.

  The app Nike + running cannot currently access heart rate monitor watch directly, but if I read the heart rate data of the health on the iPhone app, it will always be able to access - indirectly - the same heart rate for your exercise data:

  -On your iPhone, in the application of health, press Sources (tab) > Running > turn on Allow 'Running' to read heart rate data.

• Is it possible to use express Airport and Time Capsule both as two Wifi-repeaters at the same time?

  Hello

  I have a time Capsule from the airport. I use it for my back ups and he repeats my wifi in the House (bottom).

  Now I need a Repeater wifi upstairs. I think to buy Airport Express. I will connect the Airport express with a Lan connection on the floor. And then I would also have wifi on the floor.

  But is it possible to use the time Capsule Airport express airport and at the same time: two repeaters-wifi?

  1. I have a Fritz! Box router / wifi (we called wifi Fritz! box)

  2. I have a time Capsule airport / wifi Repeater (we called the turtle wifi)

  3 and now I want Airport express on the floor for the wifi upstairs (another name for this wifi?)

  Is this possible?

  Before I had used TP-link (in socket), but it works for a few months.

  Thank you for your help and advice.

  2. I have a time Capsule airport / wifi Repeater (we called the turtle wifi)

  I think that your terminology wrong... the TC cannot work as a Repeater in the Frtiz.

  I think that you have done is connect via ethernet and run it as wireless... or WAP Access Point. It is perfectly great way to do it.

  3 and now I want Airport express on the floor for the wifi upstairs (another name for this wifi?)

  This is connected by ethernet, then it will work fine... you can call it Expresswifi

  You are certainly going to clutter the wireless channels, you could so be interesting rather than auto setting fastenings.

  2.4 ghz has been set to 1, TC 6 and 11 Express then Frtiz.

  5 GHz is less of a problem... auto should be fine, because the beach is mediocre.