Run sub VI in an another VI

Similar Questions

• You can run this program while using another anti-virus program

   
   
  You can run this program while using another antivirus program?
  I know that it is a matter of end now that MS does not have anyone else.
  However, I was going to dnld MS antivirus with Norton market too.
  I couldn't find info on one might or might not run another
  antivirus program during execution of the Member States. (as a general rule, you can't)

  Still, it would be interesting to know about this issue. And... Should be
  have been on one of the pages, so "requirements" or FAQ
  for example.
  Thank you in advance, Ric.

  Hello Ric Buckmiller,

  Thank you for using the Microsoft Windows Vista Forums.

  What specific Windows Vista virus protection software are you talking about?  Windows Vista will be usually comes with Windows Defender.  Windows Defender is software that helps protect your computer against the pop-ups, slow performance and threats caused by the software security spyware and other unwanted software to detect and remove spyware on your computer. Windows Defender Protection features in real time, a monitoring system that recommends actions against spyware when it's detected, minimizes interruptions, and helps you to remain productive.  Yes you can use it with antivirus software.

  Currently, Microsoft has an antivirus software on beta.  http://www.Microsoft.com/security_essentials/support.aspx
  If you have this downloaded, it advised that you can always use another software antivirus at this time.

  Or you are referring to Windows LiveOneCare?  Please let us know status.  Thank you!

  How to uninstall any other antivirus or firewall program?

  Before installing Windows Live OneCare, please make sure that you uninstall completely any existing antivirus or firewall program that may be on your computer.

  This step is very important, no matter what protection software you use, because installing one antivirus or firewall program over another on the same computer could potentially lock up the computer.

  Note: If you do want to keep the ability to reinstall your old antivirus or a firewall program in the future, make sure you have the original product CD (or a backup program disk) before you begin uninstalling.

  Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• In another thread - another method and then run Sub...

  I wrote a method to extract a string from a webpage using StreamConnection and it works perfectly... except that it runs on the main thread.  I wonder if there is a simple way to have a method that returns an object (String in this case) something to run on a thread and return it to the first thread.

  Everything I try the only thing I can get to work on the second thread is what's on the run method void, but that returns nothing... because it sucks...

  Until now what I thought is to pass the variables I need in the constructor, then set the connection stream real term where I want retruned is written in a class variable and another method that returns the class variable that has been filled with the run method... but that doesn't seem to just... thought he worked in a simple test I ran...

  A slightly different way (but completely equivalent) to work in a another thread is to create a class that implements Runnable and feed a thread. If, for any reason, you do not want to expand Thread (because your worker class extends already something else and it would be difficult to refactor), then this variant is a lifeline. You do something like this:

  class WorkerClass extends AnotherClass implements Runnable {    // ...    public void run() {       // do time-consuming work here    }}
  
  // later...WorkerClass worker = new WorkerClass();// initialize worker object. Then: new Thread(worker).start();
  

  As it is easy to turn a class in an executable (you simply add "implements Runnable" and a run() method), it's an easy way to avoid the subclassing Thread.

  Regardless of how you use to perform work in a separate thread, there is always the question of how to get the results. With the help of the observer is a common way to handle this, but in general, this means that the results are returned in the worker thread, not the thread from the main event. If you want to update the user interface, this can be a problem. Another approach is to structure your code something like the following:

  /** * Process the results of some time-consuming operation. */public void acceptResults(ResultType result) {  // ...}
  
  /** * Start a thread to carry out time-consuming work in a * separate thread and deliver the results back in the * event dispatching thread. */public void launchWork() {  new Thread() {        public void run() {           final ResultType res = computeResults();          Runnable r = new Runnable() {                public void run() {                   acceptResults(res);               }         }         Application.getApplication().invokeLater(r);      }
  
         /**        * Do time-consuming work in this method       */       private ResultType computeResults() {         // connect to server, interpret reply, etc.       } }.start();}
  

  You have the right idea that is running in a thread separate is how to manage a time consuming task. The point of all, however, is that you (the event dispatching thread) don't want to wait for the task at hand. Both the observer model and the code here offer a solution for a worker thread to do the work without blocking the thread of the event. The invokeLater() method was kindly provided by BlackBerry people to give the worker threads neatly transfer control on the event dispatching thread when needed.

• Problem to run a Labview program in another pc

  Hi dear,

  I am a beginner in Labview. I have a program made by a colleague. It works fine on the PC where it was written. When I copy it to another PC, it runs. but he can't write and read the right settings and values of the instruments. Labview versions are the same and the GPIB is reconigzed.

  Thanks for your help!

  Milton

  
  

• Running a report by using another report filtering

  Hello
  
  There are really two questions in this post:
  
  (i) is there an easier way to select all the contacts who never responded positively to a campaign to filter our report using the output of another report that selects all contacts who have responded positively at a campaign? Although this approach works fine, I was able to successfully run the report on a small sample of the data set. The report, including all contacts who have responded positively at a campaign contains about 8 k record, and our system contains about 12 k contacts. When I ran the report on the full data set, I was unable to get any output even after a wait of 10 ~ 15 minutes.
  
  (II) if I use the right approach, does anyone know if CRMOD can manage a report filtered on another report with a set of data size described above?
  
  Any help/comments would be greatly appreciated.
  
  Thank you
  
  JP

  Hey,.

  Yes you can do it. Run a historical even if analysis as it is a bit large on the treatment. You have two options here,

  1. create a report with all contacts. Create a report with the Contacts that have responded negatively. Create a report with the Contacts that were created in a positive way. Use the button "Combine Analyses" to end two reports LESS from the beginning. (I'll guess it's what you do)

  2. create the three reports above, this time in the 1st report select your 'Contact-ID' field and use the filter 'Advanced' - 'filter based on a column in another State. You can actually say show me all Contact ID that are not in this report. Do this with the two reports (it works better, but you can't take 8 193 ID in all report filter)

  I hope this helps.

  Oli @ Innoveer

• [Beginner] Start button run sub vi only once

  Hi, I am very confused by what it seems, very simple task.

  I have a piece of code and I need to connect it to 'start' button that will run once when the button is pressed, run once more, if I press the button again and so on.

  I tried with 'while' loop and true/false button connected to him, but, as you know, code inside the loop runs continuously as long it is true which is incorrect, it does not stop when it should.

  I woul hold it like this: press start-> code in the block runs once and that's it, no more unsless I press the new button...

  Please advice.

  PS: I have attached the vi piece I need to connect with button. He is currently working as intended but I can't seem to make it executable with button.

  An event loop is the way to go, but since you're a beginner. This is the Basic, simple way:

  

  You must click with the right button and change the mechanical action of lock when you press on (or exit) to run only once.  If you set it to spend it will switch.

• Sub - VI copy to another file

  I wrote a program that you call several of the Subvi. For the record, I copy all the files to a new folder before that I make changes, but calling the Sub - VI path from the main program is still in the old folder. Is it possible to make the main program calling the Subvi contained in the new folder (where is the new main program)?

  Thank you.

  Angelia

  Try to rename the old folder to something else temporarily so your VI will not be able to find the Subvi when first loading. Now load your VI.  He will spend time searching the Subvi, but cannot find them (because the folder no longer exists under this name of origin.)  Navigate to the new folder and choose the Subvi has from there.  You can or can not do this a few times more for the other Subvi, which it does not.

  Once you are finished, close and save your VI, now all the Subvi should be linked to the new locations.

  Why you copied everything into a new folder?  You can make a backup to the new location on your project file.  Consider "save the source distribution".

  If I have something to copy in order to perform a backup.  I have to do when everything is closed and copy the whole project folder to a new location.  The new location with the new name is now my back and I make no change in the original folder, so that I don't have to worry about restoring links of any Subvi.

• Is it necessary to have Windows Defender running in spite of having another antivirus running on the computer?

  Original title: I would advocate for windows running while I also have an anti virus runing

  I would running windows defender when I have an anti virus running aswel

  For W7, Defender peut work with some AV packages, but others turn it off.

  I don't have an exact list of those who are or are not.

  However, Microsofts own MSE, turns the Defender on W7, for example.

  See 'Conversion to antivirus' in https://en.wikipedia.org/wiki/Windows_Defender

  Also, see this post - http://answers.microsoft.com/en-us/windows/forum/windows_7-security/why-windows-defender-wont-run-in-windows7x32/6a3a55e9-6f96-47bf-b668-5f39b734e15d

• You can run windows xp next to another windows xp?

  I want to install windows xp gamers addition next to my windows xp professional, how can I do?

  Hello

  Windows XP gamer edition is not an authenticated to Microsoft operating system. Windows XP Gamer edition is a fan of the original Windows XP operating system change.

  Microsoft does not support editing pirated Windows.

  NOTE: Microsoft cannot guarantee that problems resulting from the use of third-party software can be resolved. Software using third party is at your own risk.

• Can I use is to view and run several executable files from the same GUI?

  I have two executables Labview that performs some IO analog-to-digital, each using an independent USB-6008.  I would like to run both these executables in a single UI.  Is this possible using sub-panels?  Or another method?

  I found KB exe and Server VI in what concerns but can't seem to get the workaround solutions implemented.

  http://digital.NI.com/public.nsf/allkb/8545726A00272EB0862571DA005B896C?OpenDocument

  I use Labview2009

  Thank you

  Dan

  No subgroup on the screws still share data space. If you limited the number of instance to a single (this delicate and requires the brain twist) you can use a template in a template, but once again, one instance in each model. If you restruture your code such that the shared sub - VI do not use SR or local storage (as a control not on the connector) you can keep all the specific instance stuff in the model and the PSA to the Sub screws.

  Ben

• How to create Maste Scrpt to call/execute another sql file

  Hello

  Can you please help me on below.

  I have 10 different .sql file and wanted to run in a sequence of another .sql file. Need sample file I can send it back to create my file master sql to call anothere Stored proc or .sql to comiple.

  as:

  a.SQL

  b.PRC

  c.PKH

  c.PKB

  d.SQL

  watnted to run these files from another .sql file, do I need to mention the path, if yes then how to define the path, the execution of another file. all sewage treatment.

  forward, thanks in advance

  Thank you

  Rob

  Hi, Rob.

  885137 wrote:

  Hello

  Can you please help me on below.

  I have 10 different .sql file and wanted to run in a sequence of another .sql file. Need sample file I can send it back to create my file master sql to call anothere Stored proc or .sql to comiple.

  as:

  a.SQL

  b.PRC

  c.PKH

  c.PKB

  d.SQL

  watnted to run these files from another .sql file, do I need to mention the path, if yes then how to define the path, the execution of another file. all sewage treatment.

  forward, thanks in advance

  Thank you

  Rob

  To call SQL scripts from another SQL script, do the same thing you would do to call by typing on the command line.  Put the @ symbol immediately before the name of the file:

  @a

  @b

  @c

  ...

  You don't need to say "@a.sql", ".sql" being the default value at the end of the file name.  If you find that explicitly ".sql" in the script, it is clear, then, by all means, go ahead.

  If you do not include a full path name, SQL * Plus assumes that they are in the default location.

  If you use 2 @ signs, then SQL * Plus will assume the Sub-script is in the same folder (directory) as the main script running, so you can say

  @@a

  @@b

  @@c

  ...

  How to include a path depends on your operating system. In Windows, for example, you could say:

  @d:\sql_scripts\sales\a

  @d:\sql_scripts\research\b

  ...

  Instead of the sign @, you can use the START command.

  See the SQL * Plus manual to learn more:

  https://docs.Oracle.com/database/121/SQPUG/ch_five.htm#sthref439

• Objects scripts stop working if I first change other objects in an another subform?

  The problem I have is a little hard to explain, but I'll try:

  I have a checkbox set up in a sub-forum that defines the visible radio buttons when selected, to hidden when not controlled by using the following script in the Exchange field:

  -------------------

  Form1. P1. Sec3.intranet2.Engineering::change - (FormCalc, client)

  If (genius == "1") then

  ebuttons. Presence = "visible."

  on the other

  ebuttons. Presence = "hidden".

  endif

  ---------------------

  As long as I don't touch other objects in an another subform before changing these objects, the boxes work fine. If I change to another object that runs a script in an another subform first, say:

  -------------------------------

  Form1. P1. Sec1.RequestType::change - (FormCalc, client)

  var salt = $event.change

  If (salt eq "adds") then

  Form1. P1. Sec3.Rectangle1.presence = "hidden".

  Form1. P1. Sec1.Modify1.presence = "hidden".

  Form1. P1. Sec1.DELETE1.presence = "hidden".

  Form1. P1. Sec1.delete2.presence = "hidden".

  Form1. P1. Sec1.delete3.presence = "hidden".

  Form1. P1. Sec1.name1.presence = "hidden".

  Form1. P1. Sec1.name2.presence = "hidden".

  Form1. P1. Sec1.fname.presence = "visible".

  Form1. P1. Sec1.StartDate.presence = "visible".

  Form1. P1. Sec1.Dept.presence = "visible".

  Form1. P1. Sec1.location.presence = "visible".

  Form1. P1. Sec1.position.presence = "visible".

  Form1. P1. Sec1.empstatus.presence = "visible".

  Form1. P1. Sec1.reports.presence = "visible".

  ElseIf (salt eq ' Edit') then

  Form1. P1. Sec1.DELETE1.presence = "hidden".

  Form1. P1. Sec1.Modify1.presence = "visible".

  Form1. P1. Sec1.delete2.presence = "hidden".

  Form1. P1. Sec1.delete3.presence = "hidden".

  Form1. P1. Sec1.fname.presence = "hidden".

  Form1. P1. Sec1.StartDate.presence = "hidden".

  Form1. P1. Sec1.Dept.presence = "hidden".

  Form1. P1. Sec1.location.presence = "hidden".

  Form1. P1. Sec1.position.presence = "hidden".

  Form1. P1. Sec1.empstatus.presence = "hidden".

  Form1. P1. Sec1.reports.presence = "hidden".

  ElseIf (sel eq "Delete") then

  Form1. P1. Sec3.Rectangle1.presence = "hidden".

  DELETE1. Presence = "visible."

  delete2. Presence = "visible."

  delete3. Presence = "visible."

  Modify1.presence = "hidden".

  fname. Presence = "visible."

  StartDate.Presence = "hidden".

  Dept.Presence = "visible".

  Location.Presence = "visible".

  position. Presence = "visible."

  empstatus. Presence = "visible."

  Reports.Presence = "visible".

  Name1. Presence = "hidden".

  name2. Presence = "hidden".

  position 1. Presence = "hidden".

  position2. Presence = "hidden".

  Dept1.presence = "hidden".

  Dept2.presence = "hidden".

  endif

  -----------------------------

  And then try to go to the first mentioned subform and try to change whatever it is, the script does not work and radio buttons never change their visibility state.

  HOWEVER, if I first change the State of an object in the first subform, go to the other and make a change there and then go back to the first subform and making another change, it will work BUT other subforms that have not changed will fail to work at all.

  I would that all subforms to any, subform/object is first changed function. I guess it's possible, but I don't know how/why I'm having this problem.

  I made a few changes.

  Should work now.

  https://Acrobat.com/?d=sCEZTo * Xwdrd6uXQUagsxg

• Activity monitor close unexpectedly when running in the background on the left

  Recently upgraded to Mac OS Sierra and Activity Monitor to close unexpectedly when running back plan left (do not smoke and open the activity monitor window) to a blank desktop when you use an application in another office. Clean install I tried but the activity monitor would still be down at random times when left running in the background to another empty office. Someone at - there experience this problem? For most browsing on the web using Safari on another desktop computer when Activity Monitor quit unexpectedly.

  Activity monitor also using a lot of energy since the upgrade?

  Any help would be appreciated. Thank you.

  Model: MacBook Pro (retina, 13 inches, early 2015)

  OS: macOS Sierra: 10.12 (installed via the upgrade, own installed after this problem).

  Do not forget that you are using the activity monitor version which was installed when you upgraded to Sierra. Activity monitor located in the your Mac utilities folder.

  If you have moved a previous version to a different location, it will not work.

  If you are using the correct version, post crash report. Error reports lies in the application of the Console under System reports or reports from usersand end in the suffix .crash. If you choose to do so, omit or hide any information that you consider personal.

• Video of the MacBook Air to accuse by unplugged (current running off battery)

  Hello. I have a Macbook Air from 2012. The Macbook works perfectly fine when it is plugged, but the minute I unplug the unit, some video that I might be streaming suddenly freezes, even if sometimes the audio is not yet. Weird. The battery works, even if it runs in less than an hour. It has a cycle of 657 counter. The battery health is diagnosed as being 'good '. Anyone know why this is happening and what I can do about it?

  Thank you.

  Apparently, the MacBook Air is electric rationing of the battery through the

  all of the GPU, CPU, free wireless internet, open, applications and requirements

  Mac OS x itself; so many invisible things are underway in the background.

  Have you looked into the specifications of profile of electrical system and battery

  where the status of the battery is spelled in milli-ampere-hour charge remaining

  and expected full load capacity?

  I imagine that the battery can be replaced; also if SSD drive

  is full of stored content, the effort it takes the system to find the space

  for swap files and read/write then in the storage disk, is your MB/Air tax.

  Maybe an upgrade of the hard drive (SSD) ability is something to check

  in (if it is possible to upgrade) or just be sure to not have much stored on board.

  A replacement may be obtained from the macsales, OWC, among others.

  Also make sure that the MagSafe connectors are clean and free of debris on both sides

  the AC adapter and the DC-in Board (on the computer).

  For more information on batteries for portable laptops, & magsafe Chargers:

  • About batteries for laptops Mac - Apple Support

  • Laptops Apple: Troubleshooting MagSafe adapters - Apple Support

  If yours is a model 11 inches, total expected her battery life cycles are less

  as the largest 13-inch model (with the largest capacity of the battery + request) if the

  County of 657 (of max. 1 000) can be decreased if the computer has never been

  Let it run until the battery is dead. ~ Or if the storage environmental conditions or

  use, have marginalized the ability of the computer to function in the plug.

  • Reset the management system (SCM) controller on your Mac - Apple Support

  • How to reset the NVRAM on your Mac - Apple Support

  The SMC reset (and sometimes reset NVRAM) can help with the battery power

  management in general; but the battery may be suspect. The battery charge

  includes everything in the MacBook Air; brightness, audio volume, so the screen

  the use of Wi - Fi, other applications that run in the background; also the antivirus or other

  analysis software running needlessly in the background, using cycles CPU. The

  battery may be getting a workout. More so, if you run games or any other active content.

  You could look at the activity monitor to check the different points under your control

  who may be using resources; all this that consume energy are suspect. Some of them are

  more in your control than others. the system manages several outside of your access.

  An Etrecheck report generated when the unit is running under the battery and another

  When operating on current alternative, can be useful. If nothing else, to see what is

  installed in the computer and its running configuration specifications. The load can tell a story.

  http://etrecheck.com/#about

  There is also perhaps adware or other software that affect the performance of the Mac;

  This may include antivirus, and if cleaning applications have been executed, they can damage the OS X.

  A free to use app, formerly known as "adware medic" now malwarebytes, can help:

  •Malwarebytes | Malwarebytes Anti-Malware for Mac

  https://www.Malwarebytes.com/antimalware/Mac/

  Malwarebytes Anti-Malware (was AdwareMedic) return of experience helps you get your Mac.

  Hard to say exactly what is happening. -If it were mine, I would look in different details.

• I need Adobe flash in order to run some of my apps, how do I activate the "flash" when he asks me for activation?

  In particular, I'm trying to use the web site to my "Lumosity" which is enabled by adobe flash only (according to them). When I connect to site and try to load a game, it never loads due to 'flash' blocked I guess. I do not receive the message at the top asking if I want to activate 'flash '.

  I understand that Mozilla is taking a position with Adobe for their ongoing security issues and I appreciate it. Initially, I uninstalled my operating system of Linux/Ubuntu flash after learning of the issue, but I couldn't find a suitable replacement to run videos and other, so I had to reinstall to use my computer. After the reinstallation, I am able to see you tube and vimeo but am not able to use my Lumosity website. I'd like suggestions on how to get flash to run despite security problems or another way to make full use of my computer. Thanks, Jeff

  I should also mention the Group of permissions of the Page Info dialog box. You can call it upward on a page using one of these:

  • Right click and select View Page Info > permissions
  • (menu bar) Menu Tools > Page Info > permissions
  • Click the icon of padlock or globe to the left of the address of the site > additional information > permissions

  Upstairs, there is a section for plugin activation permissions in-situ. I hope that if the other method does not work, it will be.