Run the Air Application

Similar Questions

• system is not able to run the Apple Application Support service

  I can't install itunes on windows 7 32 bit. Any suggestions on Apple Support do not work. The system is not able to run the Apple Application Support service. Any suggestiones?

  Can you post the error message you get when you try to install or launch iTunes?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• How to run the HTTPDemo application?

  I use JDE 4.7 and tries to run the HTTPDemo application in the samples.jdw, using the default Simulator 9530.  But I can't seem to access the https://www.blackberry.com/go/mobile/samplehttps.shtml.  What should I do to make this work?  I have to Setup Wap Options in the application?  appreciated your help

  PJ

  Heya,

  You must have the MDS Simulator running.

  For more information, go to the help in the Blackberry Simulator. Contains information on this right to the = high)

  ~ James

• How to identify if the AIR application builds in IOS

  How to identify if the AIR application background application ios air.

  Have we not all events to notify when done app background?

  These are the headphones to tell when the app disables and active:

  stage.addEventListener (Event.ACTIVATE, fl_Activate);

  stage.addEventListener (Event.DEACTIVATE, fl_Deactivate);

• Error running the same application

  Hello
  I was able to run the same application in another machine in another place.
  
  But when I run the app even here now, by putting the following host name instead of the IP address (I used when I ran the same application in another place) in the connection string.
  
  String url = "jdbc:oracle:thin:@ibmpc_may:1521:xe";
  
  (I have no problem to connect to this DB XE by here)
  XE =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = ibmpc_may) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = XE)
  )
  )
  
  But I had the problem below when you run the application itself.
  # Cannot run application app12 due to the deployment on IntegratedWebLogicServer error.
  [16: 09:42] # incomplete deployment. ####
  [16: 09:42] remote deployment failed
  [Application app12 interrupted and cancelled Server Instance IntegratedWebLogicServer]
  
  Either by the way, where is the log file? The host name that I used above may be the reason for the problem?
  
  Published by: user12233770 on May 10, 2011 16:23

  You can check with the removal of system folder?

  It will be in C:\Documents and Settings\utilisateur\Application Data\JDeveloper

• Problem running the sample Application after installation patch set 4.0.2.00.07

  We just applied the fix 4.0.2.00.07 on our environment to TEST APEX4.0.
  Now, I can not run the sample application. "When I run the application, log in using either the administrator or the user of demo with the #lower_case_workspace_name #", the browser generates the following error message:
  
  ORA-06550: line 2, column 8: PLS-00201: identifier 'CUSTOM_AUTH' must be declared ORA-06550: line 2, column 1: PL/SQL: statement ignored
  ERR-10460 error cannot perform the function of verification of the authentication credentials.
  
  The sample application works very well on our DEV APEX 4.0.0.00.46 environment * without * the patch set 4.0.2.00.07.
  
  Does anyone have an idea how to solve this problem
  Thank you

  Hello

  Ensure that the CUSTOM_AUTH & CUSTOM_HASH functions exist in the scheme of the analysis of the sample application.

  CITY

• Reduce the AIR Applications to the system tray.

  Hello. Is it possible to minimize our AIR applications to the system tray? Internet Download Manager can have it's window closed but still running and appearing in the system tray, and is it also possible to display balloon messages as do some programs? Any solution even would be really useful.

  Thank you.

  Working with the dock and the system tray | Adobe Developer Connection

• Help! Run any AIR Applications without Adobe AIR.

  Hello, I wanted to ask that is it possible to run AIR applications without having Adobe AIR on your computer. It is really annoying when you have to give your application to use someone, and then the person needs Adobe Air to run it. Any suggestions?

  Where to start...

  AIR is a bit like Java, in the sense that it requires a runtime must be installed. This engine has all the "stuff" that allows the application to run. Similarly, applications like 3DMax or Word require the operating system to be present for them to run. These programs are written using the API calls that are in the target operating system. Similarly, AIR and Java apps are written using the API calls that are present in their execution. To bring a full turn, the AIR is an application written in C, that uses the API for the target operating system. Thus, when you perform certain functions within the AIR, he knows how to execute the necessary functions of the operating system (if necessary). AIR also provides a large number of higher level and management features that make your life as a programmer much easier.

  Look at iOS or Android, we have the occurrence of the thing. Some developers write applications using Objective-C (iOS) or Java (Android) which are using the APIs specific to these operating systems. It's the same as writing your application in C like 3DMax.

• Publish everything in running the publishing application ATG - CRS Server. Unable to query the table 'das_id_generator '.

  Hello

  I use ATG version 10.2 and you have configured CRS application by IMC. All data import and deployments have been successful.

  Applications of short (MDEX 6.4.1, CASE 3.2.1 6.4.1.2, tools and Framework 3.1.2 platform services) are running: port 8006, 8500, race 8888.

  Now MY PROBLEM IS in TWO PARTS:

  PART 1)  Ran the store on jboss, has worked well, core application started without any error.  When trying to load the homepage, get following error message:

  16:42:25, 926 full repository INFO [SEORepository] SQL boot

  16:43:32, 653 ERROR [DynamoServlet]

  CAUGHT AT:

  Container: ATG.servlet.jsp.ContainerJspException: Cannot find the named component: / atg/registry/Slots/HomeTheme; Source: javax.servlet.ServletException: Cannot find the named component: / atg/registry/Slots/HomeTheme

  at atg.taglib.dspjsp.ParamTag.doStartTag(ParamTag.java:419)

  at org.apache.jsp.navigation.gadgets.homePagePromotions_jsp._jspx_meth_dsp_005fparam_005f0(homePagePromotions_jsp.java:1021)

  at org.apache.jsp.navigation.gadgets.homePagePromotions_jsp._jspService(homePagePromotions_jsp.java:219)

  at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)

  at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:369)

  at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:322)

  at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:249)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)

  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)

  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)

  at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:638)

  at org.apache.catalina.core.ApplicationDispatcher.doInclude(ApplicationDispatcher.java:543)

  at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDispatcher.java:480)

  at atg.servlet.WrappingRequestDispatcher.include(WrappingRequestDispatcher.java:123)

  at atg.taglib.dspjsp.IncludeTag.doEndTag(IncludeTag.java:883)

  at org.apache.jsp.index_jsp._jspx_meth_dsp_005finclude_005f1(index_jsp.java:633)

  to org.apache.jsp.index_jsp.access$ 1 (index_jsp.java:622)

  to org.apache.jsp.index_jsp$ Helper.invoke1 (index_jsp.java:685)

  to org.apache.jsp.index_jsp$ Helper.invoke (index_jsp.java:711)

  at org.apache.jsp.tag.web.store.pageContainer_tag._jspx_meth_c_005fwhen_005f1(pageContainer_tag.java:2757)

  at org.apache.jsp.tag.web.store.pageContainer_tag.doTag(pageContainer_tag.java:812)

  at org.apache.jsp.index_jsp._jspx_meth_crs_005fpageContainer_005f0(index_jsp.java:598)

  at org.apache.jsp.index_jsp._jspx_meth_dsp_005fpage_005f1(index_jsp.java:565)

  at org.apache.jsp.index_jsp._jspService(index_jsp.java:127)

  at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)

  ...........................

  ...........................

  ...........................

  ...........................

  At this point, the CRS page opens but no short content. Don't load no registration, no image on the home page does display, NO SEARCH BOX displayed in the header.

  PART 2)  On top of that when I try to run the server pubishing on JBOSS, start does'nt server and responds to error. If the das_id_generator table exists in DB for all 4 patterns.

  16:09:41, 082 INFO [ScreenLog] with logging of external for debug messages and trace kernel to avoid hidden kernel logging information. Set the property /atg/dynamo/service/logging/ScreenLog.useInfoForDebug to false nucleus to use external instead trace and debug logging.

  16:09:41, 199 INFO [Version] HV000001: Hibernate Validator 4.3.1.Final

  16:09:41, 748 Truncating WARN [ClusterBroadcaster] serviceProperties "commandLineModules" key value

  16:09:42, size INFO [STDOUT] 345 (ERR_QUERY_TABLE, das_id_generator

  16:09:42, 351 ERROR [IdGenerator]

  CAUGHT AT:

  Container: ATG.service.IdGen.IdGeneratorException; Source: Container: ATG.service.IdGen.IdGeneratorException: Cannot query the table 'das_id_generator '. Please make sure that the table exists and is accessible before you start this service. ; Source: Java.Sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist

  at atg.service.idgen.PersistentIdGenerator.initialize(PersistentIdGenerator.java:389)

  at atg.service.idgen.AbstractSequentialIdGenerator.doStartService(AbstractSequentialIdGenerator.java:643)

  at atg.nucleus.GenericService.startService(GenericService.java:561)

  at atg.nucleus.NucleusNameResolver.startService(NucleusNameResolver.java:1726)

  at atg.nucleus.NucleusNameResolver.configureAndStartService(NucleusNameResolver.java:1397)

  at atg.nucleus.NucleusNameResolver.createFromName(NucleusNameResolver.java:928)

  at atg.nucleus.NucleusNameResolver.createFromName(NucleusNameResolver.java:667)

  at atg.nucleus.NucleusNameResolver.createFromName(NucleusNameResolver.java:648)

  at atg.nucleus.NucleusNameResolver.resolveName(NucleusNameResolver.java:493)

  at atg.nucleus.ConfigurationRef.getValue(ConfigurationRef.java:119)

  at atg.nucleus.SimpleComponentState.setBeanProperty(SimpleComponentState.java:403)

  at atg.nucleus.SimpleConfigurationState.saveToBean(SimpleConfigurationState.java:240)

  at atg.nucleus.SimpleConfigurationState.configureBean(SimpleConfigurationState.java:263)

  at atg.nucleus.BeanConfigurator.configureBean(BeanConfigurator.java:297)

  at atg.nucleus.PropertyConfiguration.configureService(PropertyConfiguration.java:984)

  at atg.nucleus.SingleNucleusConfigurator.configureService(SingleNucleusConfigurator.java:84)

  at atg.nucleus.NucleusNameResolver.configureService(NucleusNameResolver.java:1643)

  at atg.nucleus.NucleusNameResolver.configureAndStartService(NucleusNameResolver.java:1368)

  ........................

  ........................

  ........................

  An early response would be really useful because we have demo in 10 days.

  Kind regards

  Ben Milot

  Thank you for this comment.

  I had created a fresh scheme for publication but the jboss was still pointing to the old.

  I've updated this pointers in file @ /server/ atg atg - ds - ds.xml. Worked like a charm!

  If 2nd EDITION solved.

  
  

  The QUESTION 1 depended on question 2. Once I ran publishing and completed the full deployment on ICC, 1st edition got resolved.

  Thanks to shaik and Grando

  Kind regards

  Ben Milot

• Is there no way to run an AIR application audio to audio output devices different from?

  I need to do a couple of our AIR applications select some audio devices to send their audio output, and last year, someone mentioned possibly using native extensions to do this.  I had to start working on other things for a while, but I'll be back to that (for the moment), and I basically learned how to create native extensions.

  But so far, they do not seem to provide me with any privileged access to what's happening under the hood of an AIR application.  When you stream live in via RTMP or RTMFP, details of the audio you are hidden.  It doesn't seem to be any place where you can actually access the audio bytes are sent on the network.  You can specify a certain object SoundTransform for the NetStream to use, but this class is final and one vanilla Flash build, so even though she may have a way to access the audio bytes, they are not accessible to all.

  It really seems that, when a NetStream starts streaming live audio, there is no way under the Sun for access to the bytes of audio and direct them to a certain audio output device, with or without extensions.  Is it so?  It would be unfortunate that Adobe does not allow it, even through the native extensions.  Thank you.

  Couple quick thoughts...

  The limits are important. There is a lot of work to maintain a clear separation between a decision to users and developers. For example, you cannot change an audio by default to users out because that clearly violates a decision to users. That said, this is a mess of people debating the issue and in fact finally a COM API without papers you can find allows you to actually do in Vista/Win7 (but not 8), but do not expect that it is a "right thing to do":

  lie lly-setting-the-default-playback-device-and-recording-device?forum=windowspro-audiodevelop http://social.Microsoft.com/forums/en-US/9ebd7ad6-A460-4A28-9de9-2af63fd4a13e/programatica

  You can get a drink before reading this.

  Incidentally, RTMP is secure, which explains why you can't access the bytes. The entire purpose of this is to ensure that their media cannot easily be copied or stolen media developers. Adobe don't document their method of securing the flow, but they do not publish the RTMP protocol specification. It is quite possible for you to create your own server method and encryption protocol RTMP while providing an RTMP stream to the custom client that you yourself the code which peut read flow. Here are the specs:

  http://www.Adobe.com/devnet/RTMP.html

  So I would say that it would be unfortunate if Adobe did give, you access the bytes. You might as well hand users an mp3 of a song because they steal left and right media.

  That does mean that you can not use a multitude of ways to get data via the default output device. Many applications (fraps/etc) captures audio streams video and mixed. But Adobe won't give you the keys of the Kingdom and allow you to decrypt protected multimedia Protocol.

• cannot package animation swf inside the AIR application with API-ad-hoc of the target

  I have included a small animation today in my AIR application using a clip from movie to swf as below

  private var myLoader:Loader = new Loader();  animation connection

  private var url: URLRequest = new URLRequest("..) /.. /.. (' / data / ConnectingAnim.swf ');

  ... code to add the loader and position

  It works fine when I deploy on my device via USB, but when I try to package for ad-hoc distribution, the ipa resulting isn't fair. The screen with the animation is broken.

  I'm guessing that the packaging for the app store is probably broken too.

  Am I missing something?

  Thank you!

  Post edited by: mu.a

  You must use a loader context, unless you use the interpreter mode. Read this article:

  http://help.Adobe.com/en_US/ActionScript/3.0_ProgrammingAS3/WS5b3ccc516d4fbf351e63e3d118a9 b90204 - 7de0.html

  You want the context.applicationDomain = ApplicationDomain.currentDomain;  variation.

• Issue by running the JavaFX application in web browser

  Our team was currently developing a desktop application that must now be executed in a web browser. Deployment was successful, but everything running in IE 8, the background color of the IE outside the scene (from the desktop application) comes from gray color. Background color of our app is white, that is why, this gives him a strange look. The strangest thing is when we run the url in IE8, the first page (login page) comes without the gray part, IE the entire window is white color. But after logging out, (the login page must be made visible) only the stage size is available in white and the rest of the window comes in the color of gray background. Please help solve this.

  to answer your questions:

  How to set the browser size according to the size of the stage

  To resize the area at the request of a page web you can access the web page from within your app, and use javascript to get an application descriptor in the web page DOM and then set size to what you need.

  See
  http://docs.Oracle.com/JavaFX/2.0/deployment/javafx_javascript.htm#BCEIAGHE
  and
  http://docs.Oracle.com/JavaFX/2.0/deployment/javafx_javascript.htm#BCEIBFGD

  How to get the handle of the size of the browser here?

  For embedded application, you will get initial stage in the start() to the browser size allocated area.
  And you can trick, I've referenced before resizing app if browser will change areas were awarded (due to the demands of the users).

  However, I think that your question is different:

  that, in the login page, the stage size is smaller than the size of the browser that we put everything in packaging

  This means your app pop scene connection to first create and then fill the main stage?

  Good app behavior is like:

  If (runningEmbedded) {//see Tip 2.3.1 in the same guide
  fill in light of the scene with something - background for example even as a web page or an image
  }

  popLoginPage();

  Once the user fill out the main stage
  populateMainStage();

  And create all the assets for all stages of the init(). If at first you will only adding panels to the stages and creating new stages.
  You may need to clear the "dummy" of the main stage before you fill out.

  I hope this helps. If this isn't the case, please specify you app done in more details. What do you with step in the menu start, so how create you login and other stages.
  What you the size of your application and what are the stage dimensions.

• The video game Android via the AIR application is jerky

  Hi all

  We develop an AIR mobile applications targeted for Android 2.2 or higher. One of the requirements is to play H.264 videos on the mobile of the current folder (local file system). We conducted a show of Cork while trying to implement this feature, here are the details-

  1. we use OSMF that comes with Flex Builder 4.6

  2. using Adobe AIR 3.1 and Flex SDK 4.6

  When the video quality MPEG4 H.264 1280 * 720 30 fps with input flow 2000 is played on the mobile device (android), however, the video frame rate is jerky on the desk, he plays very well... StageVideo is something I want to try however, right now I have no access to Android 3.0 which is required for StageVideo...

  What do we lack? 3 AIR is not able to play H.264 videos on android, although the native Android video player it plays very well?

  Concerning

  Basset

  Hello

  Video encoding is very important.

  For example, to use base profile level 3.1 to H264 for mobile

  (and not high profile level 4.1 recommended for desktop).

  For more information, see the MAX of Fabio Sonnati session:

  "Encoding for performance on multiple devices.

  And if you have an Android phone/tablet, there is my AIR application

  Watch the Adobe MAX 2011 videos:

  https://market.Android.com/details?ID=air.fr.INWAY.maxVideos2011

  Search for "Sonnati" video for this session.

  (For the record, I use a video player based on OSMF 1.6)

  The pdf presentation is available on the blog of Sonmati:

  http://Sonnati.WordPress.com/

  Philippe

• where to find data to run the sample applications

  Hello

  I loaded the sample applications, but there is no data

  where is it possible to find a script for LOAS in demonstration base data

  FOR EXAMPLE: to use the sample application tree, we need data in EBA_DEMO_TREE_PROJECTS

  concerning

  user_fr_cg63 wrote:

  I loaded the sample applications, but there is no data

  where is it possible to find a script for LOAS in demonstration base data

  FOR EXAMPLE: to use the sample application tree, we need data in EBA_DEMO_TREE_PROJECTS

  Data should be created automatically on the installation of the application using the function to support objects .

  If I install the application of tree-sample on apex.oracle.com then 9 lines are created in EBA_DEMO_TREE_PROJECTS.

  Lack of data suggests that there was a problem during the installation. You can check this by clicking on the icon to support objects on the application home page, then install view summary in the taskbar on the right.

• When I run the Air nothing happens

  I installed Adobe air and when I go to start the program I get the screen of the agreement. I agree and nothing happens. Program will not start.

  Hello, Jeff. Trying to open an application provided by our phone company. But I was able to make it work. another post of reading did the following:

  * deleted file eulaAccepted

  * deleted directory Updater

  program began to work very well. I'm sure you probably know more information about what these files and make. But im facing up and running.