Run the automatic configuration

Similar Questions

• run the automatic configuration in test mode

  Hello

  How to run the automatic configuration in test mode?

  I looked adutilities document (Maintenance tools) but did not.

  Thank you.

  $AD_TOP/bin/adchkcfg.sh contextfile = appspass =

  Check the log file after the command is completed to find the information about the changes that Autoconfig will do if it is executed.

• Impossible to connect a computer to the wireless network, I would like to first of all the automatic configuration service and I need advice.

  Article 861122 start WZC

  Unable to connect a computer to the network wirelee I firstly the WZC serviceand I need advice. TX

  Hello

  • Are you referring to Wireless Zero Configuration (WZC) Service?
  • What happens when you start the automatic Wireless Configuration Service?
  • You receive an error message?
   
  If you experience problems with the wireless network, reconfigure the Automatic Configuration Wireless for all wireless profiles automatically, click the fix this toolfrom the link below.
  Click run in the file download dialog box, and then follow the steps in this wizard.
  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless
   
  See also:
  In Windows network connection issues
  http://support.Microsoft.com/kb/313242

• How to use the automatic configuration wizard and where can I FIND?

  How to use the automatic configuration wizard and where can I FIND?

  Hi TannySmedt,

  To activate the Configuration service automatic wireless so it starts automatically, click the Start button. Select settings , then select Control Panel. If you use Windows XP display, select the performance and Maintenance category, and then select Administrative Tools. If you use Classic view, and then select Administrative Tools. In the left pane, click the Services icon. Click the automatic Wireless Configuration icon in the right pane, and change the box Startup Type to Automatic. This parameter will be defined the service starts automatically at boot time. Then click on the Start button to start the automatic Wireless Configuration service zero wireless and click on the OK button.

  The automatic Wireless Configuration can also be started and stopped from a command prompt. To start the automatic Wireless Configuration, run the following command:

  net start wzcsvc

  To stop the automatic Wireless Configuration, run the following command:

  net stop wzcsvc

• Cannot display networks wireless range... impossible to start the Automatic Configuration service

  My wireless card says it works correctly, but when I try to choose a network I get "Windows cannot configure this wireless connection" and I'm not smart enough to understand how to start the automatic configuration service.

  Hello

  If there is no 3rd party utility running (as mentioned by Steve), or you disabled loan and lost WZC.

  Maybe this can help, http://www.ezlan.net/wzc.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• adcfgclone.pl error: RC-50014: Fatal: failed to run the auto configuration service

  Hi all
  
  I got following error while cloning an instance of R12 on HP UX.
  
  After having copied from source to target, I ran perl adcfgclone.pl dbTechStack.
  
  error...
  
  Start the synchronization context file system and its models with those of the database
  
  Database connection: impossible
  Support changing context OAM function: unverified
  Support OAM customization feature: unverified
  
  File system model: /erpdev1/orarsu/db/tech_st/10.2.0/appsutil/template/adxdbctx.tmp
  .
  .
  .
  No download file of context and its data base models. Connection to database failed
  .
  .
  .
  [AutoConfig error report]
  The following report lists the errors autoconfig met in each
  execution phase. Errors are grouped by directory and by phase.
  The format of the report is:
  < file name > < phase > < eventually return code >
  
  [INSTANTIATE PHASE]
  AutoConfig impossible successfully to instantiate the following files:
  Directory: /erpdev1/orarsu/db/tech_st/10.2.0/appsutil/install/RSU_reeldev
  adcrdb.sh INSTE8
  
  
  Fate of automatic configuration with State 1
  
  RC-50014: Fatal: failed to run the auto configuration service
  Asked by oracle.apps.ad.clone.ApplyDBTechStack
  
  Kind regards
  Sandeep.

  Hi user;

  Please check:

  12 adcfgclone release fails with AC-00423, RC-50014 adcrdb.sh lack of filesystem [549872.1 ID]
  RC-50004: Fatal: error occurred running adcfgclone.pl dbTier RDBMS 64 bit [336875.1 ID]

  It may be useful

  Respect of
  HELIOS

• How to enable the automatic configuration service in Windows XP

  How to enable the automatic configuration service in Windows XP

  Hi SamuelOkon,

  Are you facing any problem on your computer?

  You can follow the steps in this link & check if it helps.

  How to activate the Wireless Auto Configuration startup type?

  Hope the helps of information.
  Please post back and we do know.

• RC-50014: Fatal: failed to run the auto configuration service

  Hi all

  We are cloning Oracle 11i production applications. It is a 3-tier application that DB is hosted on a node, simultaneously on other applications on 3rd node.

  The database has cloned successfully during the operation of the adconfig to the node at the same time we are facing problem.

  We get below error.

  RC-50014: Fatal: failed to run the auto configuration service

  script gave:
  ****************************************************

  igccmprf.sh started at Wed Jan 28 03:27:44 CST 2014

  
  The environment settings are...

  ORACLE_HOME: /phdfci/oracle/phdfciora/8.0.6
  ORACLE_SID:
  TWO_TASK: PHDFCI
  Path: /phdfci/oracle/phdfciora/iAS/Apache/perl/bin:/phdfci/oracle/phdfciora/8.0.6/bin:/phdfci/oracle/phdfciappl/fnd/11.5.0/bin:/phdfci
  /Oracle/phdfciappl/ad/11.5.0/bin:/usr/java14/bin:/phdfci/Oracle/phdfcicomn/util/unzip/unzip::/phdfci/Oracle/phdfciora/8.0.6/bin:/usr/bin:/usr/ccs/bin
  : / usr/sbin: / phdfci/oracle/phdfcicomn/clone/bin /... /JRE/JRE/bin:/phdfci/Oracle/phdfciora/IAS/apache/perl/bin:/phdfci/Oracle/phdfciora/8.0.6/bin:/usr/ja
  VA14/bin:/phdfci/Oracle/phdfcicomn/util/unzip/unzip:/phdfci/Oracle/phdfciora/8.0.6/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/java14_64/bin:/usr/VAC/bi
  n: / usr/bin: / etc: / usr/sbin: / usr/ucb: / home/apchdfci/bin: / usr/bin / X 11: / sbin:
  LD_LIBRARY_PATH: /phdfci/oracle/phdfciora/8.0.6/network/jre11/lib/aix/native_threads:/phdfci/oracle/phdfciappl/cz/11.5.0/bin:/phdfci/oracle/phdfc
  IOra/8.0.6/lib:/usr/DT/lib:/usr/openwin/lib

  Executable: /phdfci/oracle/phdfciora/8.0.6/bin/sqlplus

  
  SQL * more: version 8.0.6.0.0 - Production on Tue Jan 28 03:27:45 2014

  (c) Copyright 1999 Oracle Corporation.  All rights reserved.

  Enter the value 1: enter the value 2: enter the value 3: enter the value of 4: connected.
  Cannot create a hold file.
  Disconnected from the database to Oracle 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  igccmprf.sh out with status 1
  ERRORCODE = 1 ERRORCODE_END
  .end std out.
  The o/s message: no such file or directory

  .end err out.
  ****************************************************

  
  Product Top pilots executed: AD_TOP FND_TOP ICX_TOP IEO_TOP ABM_TOP ECX_TOP BIS_TOP GL_TOP AMS_TOP CCT_TOP WSH_TOP CLN_TOP OKE_TOP OKL
  _TOP OKS_TOP CSF_TOP XNC_TOP IGS_TOP IBY_TOP PA_TOP JTF_TOP MWA_TOP CN_TOP CSI_TOP WIP_TOP CSE_TOP EAM_TOP IMT_TOP FTE_TOP ONT_TOP HAS
  R_TOP AHL_TOP OZF_TOP IES_TOP CSD_TOP IGC_TOP

  
  [AutoConfig error report]
  The following report lists the errors autoconfig met in each
  execution phase.  Errors are grouped by directory and by phase.
  The format of the report is:
  < file name > < phase > < eventually return code >

  [INSTALLATION STAGE]
  AutoConfig could not successfully run the following scripts:
  Directory: / phdfci/oracle/phdfcicomn/admin/install/PHDFCI_fnclclcn1
  adgendbc.sh INSTE8_SETUP 1

  afcpnode.sh INSTE8_SETUP 1
  txkWfClone.sh INSTALL_SETUP 1

  [PROFILE PHASE]
  AutoConfig could not successfully run the following scripts:
  Directory: / phdfci/oracle/phdfcicomn/admin/install/PHDFCI_fnclclcn1
  adadmprf.sh INSTE8_PRF 1
  afadmprf.sh INSTE8_PRF 1
  afcpgsm.sh INSTE8_PRF 1
  ahladmprf.sh INSTE8_PRF 1
  amscmprf.sh INSTE8_PRF 1
  aradmprf.sh INSTE8_PRF 1
  clnadmprf.sh INSTE8_PRF 1
  cnadmprf.sh INSTE8_PRF 1
  cncmprf.sh INSTE8_PRF 1
  csdadmprf.sh INSTE8_PRF 1
  cseadmprf.sh INSTE8_PRF 1
  csfagprf.sh INSTE8_PRF 1
  csiadmprf.sh INSTE8_PRF 1
  eamadmprf.sh INSTE8_PRF 1
  fteadmprf.sh INSTE8_PRF 1
  gladmprf.sh INSTE8_PRF 1
  igccmprf.sh INSTE8_PRF 1
  jtfadmprf.sh INSTE8_PRF 1
  okeadmprf.sh INSTE8_PRF 1
  okladmprf.sh INSTE8_PRF 1
  ontadmprf.sh INSTE8_PRF 1
  paadmprf.sh INSTE8_PRF 1
  txkJavaMailerCfg.sh INSTE8_PRF 1
  txkWebServicescfg.sh INSTE8_PRF 1
  wipadmprf.sh INSTE8_PRF 1
  wshadmprf.sh INSTE8_PRF 1
  xnccmprf.sh INSTE8_PRF 1

  [APPLY PHASE]
  AutoConfig could not successfully run the following scripts:
  Directory: / phdfci/oracle/phdfciora/iAS/Apache/perl/bin/perl-I /phdfci/oracle/phdfciora/iAS/Apache/perl/lib/5.00503-I/phdfci/oracle/phdfciora.
  iAS/Apache/perl/lib/site_perl/5.005-je /phdfci/oracle/phdfciappl/au/11.5.0/perl/phdfci/oracle/phdfcicomn/admin/install/PHDFCI_fnclclcn1
  adadmat.pl INSTE8_APPLY 1
  adupdlobs.pl INSTE8_APPLY 1

  
  Fate of 32 stateful auto-configuration

  RC-50014: Fatal: failed to run the auto configuration service

  Asked by oracle.apps.ad.clone.ApplyApplTop

  Env details-

  Apps 11i version

  Version of DB - 11.2.0.1

  Help, please.

  Thank you

  Thanks for the update.

  Problem is solved now.

  In fact, is copies on PROD that did not exist on the server to clone.

• Activate the automatic configuration.

  After migration DB to 11g release how to re-enable AutoConfig.
  
  Please suggest some docs to activate the automatic configuration.
  
  Kind regards.
  
  Published by: 836778 on April 26, 2011 21:10

  For 11i, please see (by using AutoConfig to manage the Configurations of the system with the Oracle Applications 11i [165195.1 ID]).

  For R12, please see (using AutoConfig to manage system Configurations in Oracle E-Business Suite Release 12 [387859.1 ID])-"" 3.2. Section activation on a new Oracle Home AutoConfig".

  You can also check:

  How to recreate the directory/scripts / / appsutil [377495.1 ID]
  How to find the .env file after the upgrade to EBS 11.5.10.2 with 9i and 10g database? [1295567.1 ID]

  Thank you
  Hussein

• Whenever I want to connect to a wireless connection, I have to manually start the automatic configuration service every time.

  always when I start windows was not detected my wireless network, I should start the WZC repair whenever detection networks and my connection, I have configured this Service aoutomatic but she never starts aoutomatically and I should start it up manually... can help me to solve my problem with my wireless connection?

  My OS: windows xp sp3 and I use Dell Vostro1520

  original title: wireless connection problem

  I GOT THE SOLUTION OF MY PROBLEM:

  1. right-click on my wireless connection click on -> status
  2. in the window on the general tab, I click on the -> properties button
  3. in the open window in the general tab I click the button -> Configure...
  4. in the open window, I go to the tab Advanced to->
  5. in the ->property: box, I select the element -> WZC managed Ethernet
  6. in the box -> value I selects the item -> Enabled
  7. I click the button OK to-> .

  NOW MY WZC SERVICE IS AOUTOMATICALLY BEGINS AT THE START OF MY WINDOWS.

• How to start the Automatic Configuration service in Windows XP Pro SP3

  I just installed my Agere Systems model Speedtouch 0110 on my laptop, I installed the drivers without the utillity and when I tried to connect it to my Homehub he said start please WZC. How can I start it?

  GoTo

  Beginning

  Run

  Type "Services.msc".

  Come in

  Find Wireless Zero Configuration in the list

  Click Start

  hope this will do

  Best regards and good luck

  Sohail Khan

• Windows could not start error 1068: dependency or group was able to start the automatic configuration of WLAN set the local computer.

  I am not able to start some services to get connected wireless.  In Device Manager the poster adapter works correctly.  The WIFI light is on.  Start Windows Wireless Service bar lights up, but the service does not just start.  I have run chkdsk and several other parts but registry cleaners I keep coming up empty.  Help, please.

  I've been sarching for hours and hours... and it's already after hours of working offline with the client in their home... no restoration of the system or the backups... typical noob... but not their fault it happened... I did EVERYTHING suggested. Nothing has worked... Almost abandoned and prepared for a re - install... then I found it at the last second...

  «OMG 911techmedics...» You're crazy GENIUS!

  Finally, something works and does not require a complete reinstall of the OS. I was so scared of it because Asus does not save a physical copy of the Recovery Manager on the hard drive, and somehow my backup discs (6 disks, waste of my DVD: O) don't work at all after spending an hour by burning.

  What happened was I used RegTweaker to do a cleaning of registry on my Win7, my computer worked faster, but I lost my WLan service and no matter what I was doing nothing worked, until I stumbled upon your post! I have read more than 50 pages of Web/forum sites and tried probably suggested and none of them worked.

  I tried:

  (1) Microsoft Winsock32 Fix
  (2) replacing Winsock dll
  (3) Yes Netsh wlan with the set command
  (4) order of Netsh reset catalog
  (5) LSP Fix.exe
  (6) right click 'Manage' on computer and everything related to the WLAN + dependencies on "automatic".

  I spent 8 hours and none of the above worked. Apparently a lot of people have the same problem after using a registry cleaner. He has tried, tested and proven. I did the registry cleaning on 2 computers and next thing I know on reboot, it is that the WLAN Service went AWOL. My first suspicion is gone to a missing or corrupted Winsock, but I never thought that a simple change of 2 files in the registry would solve the problem. Your piece of text was scary to look at in the beginning, but I was so desperate that I was willing to try anything and it really paid off. Microsoft should pay you the man! Their stupid suggestions do not work. For those who like me, I break down the instructions for you:

  Step 1: Click the button START
  Step 2: In the search box, type "regedt32" (of course, do not include the ""), right-click on the result of the research and the "Run as Administrator".

  Step 3: Click 'HKEY_LOCAL_MACHINE', should extend out to a list of things
  Step 4: Next, choose 'SYSTEM', is expected to increase again
  Step 5: Choose "CurrentControlSet", develops again
  Step 6: Select 'Services', develops into a great big list of things

  Step 7: Click on "Dhcp", the right window shows the files in this folder
  Step 8: Double click on "DependOnService".
  Step 9: Remove all the words in the text, except "Afd" box, and then click OK. You are done here

  Step 10: Then under 'Services', are looking for "EapHost", this should be a few records below Dhcp step 11: same thing, double-click on the file "DependOnService".
  Step 12: Delete everything in the text are and click OK. You are finished.

  Now close everything and RESTART WINDOWS. Your WLan should be back and work once at startup of your computer. Hope that makes you win like he saved me. Thanks to an original poster for the wonderful of the resolution. Your message has been almost too obscure to find, but I'm glad that this has been RESOLVED! I will be passing the word around to save people from the constant agony of WLAN SVC goes ballistic every time after a cleaning the registry. »

  Now then... I was about to wipe the machine flowering in any case, I thought ' what the *', and just did the 12 steps without even a reg backup... AND THIS DO FEAR WORKED!

  911techmedics saved our skins...

  Thank you!!!

  The Lady Sharrow...

• disable the automatic configuration of the window

  Dear experts,

  I put the static ip address to my windows 7 PC, but what issue ipconfig/all-command in Dos mode, it will show 169.254.x.x. I tried to search the web and

  has found that under control and I tried and finally solved my problem. In fact, I don't know what is the root cause of on this subject. Any expert can explain it or any article can explain what is the first cause I need to use method below to resolve the issue.

  : \Users\lyngtinh > netsh interface ipv4 inter show
  result as:

  IDX met MTU State name
  --- ---------- ---------- ------------ ---------------------------
  1 50 4294967295 connected Loopback Pseudo-Interface 1
  11 10 1500 connected Local area connection

  11:<=Keep it="" in="">

  Then, run this command:

  C:\Users\lyngtinh>netsh interface ipv4 set interface 11 dadtransmits 0 = store = persistent

  Hello

  In software, netsh, or network shell, is a command line utility included in Microsoft Windows. It allows a local configuration or network such as interface devices remotely. A common use of netsh is to reset the default TCP/IP, known parameters stack. Netsh interface command is used to configure the Protocol TCP/IP (including addresses, default gateways, DNS servers, and WINS servers) and displays the configuration and statistics information.

  I recommend you post the same question in Windows IT Pro TechNet for a better understanding of the netsh command lines.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  Hope that the information provided is useful.

• Error: Could not find or load class main oracle.apps.ad.tools.configuration.JaznCredentialManager over the automatic configuration

  Hi all

  We're performing an upgrade to 11i, R12, and the same durinf find the error during the configuration of the applications below.

  AutoConfig Services Phase

  Running process of Service 6 of 8 for AD_TOP

  The execution of script in InstantiateFile:

  /oracle_uat/XX/R12/apps/tech_st/10.1.3/Perl/bin/perl-je /oracle_uat/xx/R12/apps/tech_st/10.1.3/perl/lib/5.8.3-je /oracle_uat/xx/R12/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3-je /oracle_uat/xx/R12/apps/apps_st/appl/au/12.0.0/perl-je /oracle_uat/xx/R12/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi /oracle_uat/xx/R12/inst/apps/xx_xx/admin/install/txkExecSetJaznCredentials.pl

  script gave:

  ****************************************************

  ERRORCODE = 1 ERRORCODE_END

  .end std out.

  Error: Could not find or load the class main oracle.apps.ad.tools.configuration.JaznCredentialManager

  .end err out.

  ****************************************************

  Found the fix when $CLASSPATH has been disabled, but the strength to help here.

  You guys could give me an overview on likely areas that I could check.

  Thank you

  Hello

  Have you checked that the file JaznCredentialManager.class is well under

  Directory JAVA_TOP/oracle/apps/ad/tools/configuration of $?

  This class file is delivered by 12.1.3 (fix 9239090), R12. ATG_PF. B.Delta.3 (patch 8919491)

  and R12. T2K. B.Delta.3 (patch 8919489).

  Kind regards

  Phil.

• After you run the automatic update under XP, system not turn off

  Auto update my window XP last Sunday. So far the window stops again. I don't know why. Can someone please help me about this kind of problem.

  * original title - I've updated Windows XP last Sunday and so far is not shutting down *.

  Resources to solve the shutdown problems in Windows XP
  http://support.Microsoft.com/kb/308029