Cannot display networks wireless range... impossible to start the Automatic Configuration service

My wireless card says it works correctly, but when I try to choose a network I get "Windows cannot configure this wireless connection" and I'm not smart enough to understand how to start the automatic configuration service.

Hello

If there is no 3rd party utility running (as mentioned by Steve), or you disabled loan and lost WZC.

Maybe this can help, http://www.ezlan.net/wzc.html

Jack-MVP Windows Networking. WWW.EZLAN.NET

Tags: Windows

Similar Questions

  • Whenever I want to connect to a wireless connection, I have to manually start the automatic configuration service every time.

    always when I start windows was not detected my wireless network, I should start the WZC repair whenever detection networks and my connection, I have configured this Service aoutomatic but she never starts aoutomatically and I should start it up manually... can help me to solve my problem with my wireless connection?

    My OS: windows xp sp3 and I use Dell Vostro1520

    original title: wireless connection problem

    I GOT THE SOLUTION OF MY PROBLEM:

    1. right-click on my wireless connection click on -> status
    2. in the window on the general tab, I click on the -> properties button
    3. in the open window in the general tab I click the button -> Configure...
    4. in the open window, I go to the tab Advanced to->
    5. in the ->property: box, I select the element -> WZC managed Ethernet
    6. in the box -> value I selects the item -> Enabled
    7. I click the button OK to-> .

    NOW MY WZC SERVICE IS AOUTOMATICALLY BEGINS AT THE START OF MY WINDOWS.

  • How to start the Automatic Configuration service in Windows XP Pro SP3

    I just installed my Agere Systems model Speedtouch 0110 on my laptop, I installed the drivers without the utillity and when I tried to connect it to my Homehub he said start please WZC. How can I start it?

    GoTo

    Beginning

    Run

    Type "Services.msc".

    Come in

    Find Wireless Zero Configuration in the list

    Click Start

    hope this will do

    Best regards and good luck

    Sohail Khan

  • Impossible to connect a computer to the wireless network, I would like to first of all the automatic configuration service and I need advice.

    Article 861122 start WZC

    Unable to connect a computer to the network wirelee I firstly the WZC serviceand I need advice. TX

    Hello

    • Are you referring to Wireless Zero Configuration (WZC) Service?
    • What happens when you start the automatic Wireless Configuration Service?
    • You receive an error message?
     
    If you experience problems with the wireless network, reconfigure the Automatic Configuration Wireless for all wireless profiles automatically, click the fix this toolfrom the link below.
    Click run in the file download dialog box, and then follow the steps in this wizard.
     
    See also:
    In Windows network connection issues

  • Windows could not start error 1068: dependency or group was able to start the automatic configuration of WLAN set the local computer.

    I am not able to start some services to get connected wireless.  In Device Manager the poster adapter works correctly.  The WIFI light is on.  Start Windows Wireless Service bar lights up, but the service does not just start.  I have run chkdsk and several other parts but registry cleaners I keep coming up empty.  Help, please.

    I've been sarching for hours and hours... and it's already after hours of working offline with the client in their home... no restoration of the system or the backups... typical noob... but not their fault it happened... I did EVERYTHING suggested. Nothing has worked... Almost abandoned and prepared for a re - install... then I found it at the last second...

    «OMG 911techmedics...» You're crazy GENIUS!

    Finally, something works and does not require a complete reinstall of the OS. I was so scared of it because Asus does not save a physical copy of the Recovery Manager on the hard drive, and somehow my backup discs (6 disks, waste of my DVD: O) don't work at all after spending an hour by burning.

    What happened was I used RegTweaker to do a cleaning of registry on my Win7, my computer worked faster, but I lost my WLan service and no matter what I was doing nothing worked, until I stumbled upon your post! I have read more than 50 pages of Web/forum sites and tried probably suggested and none of them worked.

    I tried:

    (1) Microsoft Winsock32 Fix
    (2) replacing Winsock dll
    (3) Yes Netsh wlan with the set command
    (4) order of Netsh reset catalog
    (5) LSP Fix.exe
    (6) right click 'Manage' on computer and everything related to the WLAN + dependencies on "automatic".

    I spent 8 hours and none of the above worked. Apparently a lot of people have the same problem after using a registry cleaner. He has tried, tested and proven. I did the registry cleaning on 2 computers and next thing I know on reboot, it is that the WLAN Service went AWOL. My first suspicion is gone to a missing or corrupted Winsock, but I never thought that a simple change of 2 files in the registry would solve the problem. Your piece of text was scary to look at in the beginning, but I was so desperate that I was willing to try anything and it really paid off. Microsoft should pay you the man! Their stupid suggestions do not work. For those who like me, I break down the instructions for you:

    Step 1: Click the button START
    Step 2: In the search box, type "regedt32" (of course, do not include the ""), right-click on the result of the research and the "Run as Administrator".

    Step 3: Click 'HKEY_LOCAL_MACHINE', should extend out to a list of things
    Step 4: Next, choose 'SYSTEM', is expected to increase again
    Step 5: Choose "CurrentControlSet", develops again
    Step 6: Select 'Services', develops into a great big list of things

    Step 7: Click on "Dhcp", the right window shows the files in this folder
    Step 8: Double click on "DependOnService".
    Step 9: Remove all the words in the text, except "Afd" box, and then click OK. You are done here

    Step 10: Then under 'Services', are looking for "EapHost", this should be a few records below Dhcp step 11: same thing, double-click on the file "DependOnService".
    Step 12: Delete everything in the text are and click OK. You are finished.

    Now close everything and RESTART WINDOWS. Your WLan should be back and work once at startup of your computer. Hope that makes you win like he saved me. Thanks to an original poster for the wonderful of the resolution. Your message has been almost too obscure to find, but I'm glad that this has been RESOLVED! I will be passing the word around to save people from the constant agony of WLAN SVC goes ballistic every time after a cleaning the registry. »

    Now then... I was about to wipe the machine flowering in any case, I thought ' what the *', and just did the 12 steps without even a reg backup... AND THIS DO FEAR WORKED!

    911techmedics saved our skins...

    Thank you!!!

    The Lady Sharrow...

  • Whenever I start the computer I lost the wireless capability. I get error WZC "871122". I then start the automatic Wireless Configuration service. Is there something I can do if I can't do it every time that this?

    Continually 871122 WZC error.

    Hi Shane,

    Looks like you have (or had) 3rd party software that previously managed your wireless connections, so casting service windows does not start automatically.

    See the following Article in the Microsoft KB, see if it suits it for you;

    http://support.Microsoft.com/default.aspx/KB/871122

    More precisely:

    If your computer or your wireless network card came with its own wireless network software, follow these steps:

    1. Click Start, click run, type ncpa.cpl and click OK.
    2. Click on network connections.
    3. In network connections, select your wireless connection, and then click change settings of this connection.
    4. On the wireless networks tab, click to select the Use Windows to configure my wireless network checkbox.

    To start the automatic Wireless Configuration service, follow these steps:

    1. Click Start, click run, type %SystemRoot%\system32\services.msc/s, and then click OK.
    2. Double-click Wireless Zero Configuration.
    3. In the list of Startup type , click Automatic, and then click apply.
    4. In the Service status area, click Start, and then click OK.

    Let me know how you go.

  • Cannot access the network drive or impossible to mount the network drive. Error "network path was not found.

    Original title: network path was not found

    HI, after the upgradation from windows xp sp2 to sp3 (next to the customer) I can't access the network drive or impossible to mount the network drive. ' ' It showa error "network path was not found.

    Hi gauravadavadkar,

    Thanks for posting your query in Microsoft Communities. Provide the following information:

    ·         Did you do changes on the computer before the show?

    ·         What is the full error message?

    ·         Work on a domain?

    Follow these methods.

    Method 1: Temporarily disable the security software.

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: Follow these steps:

    Step 1: Start the computer in safe mode with networkand check if the problem persists.

    S tep 2: if the problem does not persist in safe mode with networking, perform a clean bootto see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow the steps to configure Windows to use a Normal startup state section of the article to start the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Startand then click run.

    (b) type msconfigand click OK.
    The System Configuration utility dialog box appears.

    (c) click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.

    (d) when you are prompted, click restart to restart the computer.

    Method 3: Follow the steps in the article.

    How to troubleshoot a network home in Windows XP

    In Windows network connection issues

    You can read this article for more information:

    Windows wireless and wired network connection problems

    I hope this helps. Let us know if you need more assistance.

    Thank you.

  • The Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

    original title: The Audio service is not running windows vista

    Hello

    I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

    I saw it in Event Viewer

    The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

    Thank you

    -Majid

    original title: The Audio service is not running windows vista

    Hello

    I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

    I saw it in Event Viewer

    The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

    Thank you

    -Majid

    These error messages are a pain in the neck to extract useful information.

    I suggest that you do a search online 'pilot audio free downloads' and find another audio program for your PC.

    If you find something that works for your satisfaction - remove your original pain in neck audio software and make sure you make your audio program newly found the 'default' device.

    Realtek and NVIDIA, for example get stuff good free audio driver.

    If the new program does not work - it would be a good indication that you have hardware on your PC, drive problems and no amount of play more with to try to correct the audio software will help. Period

  • Impossible to activate the audio service with error message: "cannot start the Audio window Service.Some features will be unavailable.

    Original title: how to get audio in my system that failed for an unknown reason

    Hello... In my audio system does not... If I try to open the "manage audio devices" option in the Control Panel it opens a dialog box with the content next-' this computer cannot play audio because the Windows Audio Service is not enabled. " You want to enable the Windows Audio Service? " for which I clicked 'Yes' ." Then it displays a dialog box that contains the text next-"Could not start the window Audio Service.Some features will be unavailable".
    What is the problem and what should I do now?
    -Thanks in advance

    Hi Thennisha,

    Thanks for posting your question in the Microsoft Community.

    I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

    To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

    1 have you ever done any recent hardware or exchange of software on your computer before the show?
    2. What is the brand and model of the computer?

    Please follow the steps in the link below and check off the question:

    No sound in Windows:
    http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

  • service or group of addiction was able to start; Cannot start the diagnostic policy service

    I have windows vista Home premium. I did have a problem connecting to internet before. So today, I can't connect to my router, either by wireless or ethernet.  The router is fine, because my roommates are able to connect.  The signal is also excellent, but my computer is "connected with limited access".   The message I get is: 'unknown connection status. The dependency service or group was able to start. "" When I click on diagnose and repair, it says Network Diagnostics cannot run because the Diagnostics Policy Service is not running "then it gives me the option to open the Service Control Manager to manually start the diagnostic policy Service.  This opens a window of Services with a huge list of things I don't understand.  I searched for solutions to the problem, and none have worked.  Any advice greatly appreciated.

    Hello, Lesley

    Thank you for using the Microsoft answers Forum!

    The following information is taken from: http://support.microsoft.com/kb/943996

    Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk!

    It is possible that the permissions on a specific registry key has changed. You can try to correct this by clicking on start, type regedit in the prompt, do a right click the program regedit and select run as administrator. In the registry editor, click the arrow to expand the selection, go to HKEY_LOCAL_MACHINE, SYSTEM, CurrentControlSet, Services, DPS, on the right, click settings and click Permissions.  In the permissions screen, select the user TrustedInstaller . If you do not see the TrustedInstaller user, click Add, type NT TrustedInstaller service and press OK. If make sure that permissions full control and read are checked for the TrustedInstaller user.

    Let us know if that helps.

    David
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • My windows firewall does not illuminate. Windows cannot start the Windows firewall Service ICS.

    How can I solve unless I need to have this problem to download protection software.

    Hi Octavia10,
     
    -What version of service pack of Windows XP you are using?
     
    Try the methods listed in the given article to resolve this problem:
     
    Note: The steps are applicable to the other version of Windows XP as well.

  • SegmentedControl: WARNING: cannot display more than 4 segments allowed on the screen.

    I "ve defined a custom control:"

    import bb.cascades 1.0

Container {

    property alias text: label.text

    background: Color.create ("#262626")
    bottomMargin: 30
    layout: StackLayout {
        layoutDirection: LayoutDirection.TopToBottom
    }
    Label {
        id: label
        text: "..."
        textStyle {
            base: SystemDefaults.TextStyles.TitleText
        }
    }
    SegmentedControl {
        Option {
            id: option1
            text: "A"
            value: 5
            selected: false
        }
        Option {
            id: option2
            text: "B"
            value: 4
            selected: false
        }
        Option {
            id: option3
            text: "C"
            value: 3
            selected: false
        }
        Option {
            id: option4
            text: "D"
            value: 2
            selected: false
        }
        Option {
            id: option5
            text: "E"
            value: 1
            selected: false
        }
    }
}

    And have used it as such:

    import bb.cascades 1.0

Container {
    background: Color.create ("#262626")

    layout: StackLayout {
        layoutDirection: LayoutDirection.TopToBottom
        leftPadding: 20
        topPadding: 20
    }

    RatingControl {
        text: "Eli"
    }
    RatingControl {
        text: "Hazel"
    }
}

    But when I load the app, I get this error:

    SegmentedControl: WARNING: cannot display more than 4 segments allowed on the screen.

    Ah, some so I missed the fact that only 4 of my 5 segments were displayed in the preview of the user interface, which should have been a hint.  So, this is just a warning.

    Something else that threw me off was that my UI was not poster when I actually loaded it in the Simulator, but I think it's because I need to have a Page at the top of main.qml, not a simple container.

  • Sims3-message-cannot start the game 0x039e8474 service initialization error

    someone recently put the sims 3 on my computer it's a game hacked, it worked fine on his computer, but it is not functional on mine me repeat it, cannot start the game 0x039e8474 service initialization error

    [Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs]

    Hello

    Probably that's due to the custom being contained in the game which is not compatible with your current version. It can also occur when your cache has not been cleared of a previous installation or game save and damaged.

    I suggest you follow the steps mentioned in this article about this.

    http://Forum.thesims3.com/JForum/posts/list/561267.page

    Note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

    If the problem persists, you can post the question in the Sims3 community forums.

     
     
    Hope this information helps. Response with status so that we can help you.

  • Cannot use Adobe CC, guests 'impossible to reach the Adobe server.

    Cannot use Adobe CC, guests 'impossible to reach the Adobe server. Help, please.

    Please see can't use Adobe CC

    (Double Post)

  • Cannot start the vCenter Server Service

    Cannot start the vCenter Server Service. To get this message to control the attached screenshot

    2013-09 - 03T 21: 34:18.800 + 05:30 [info 03612 'utilvpxdVdb'] [VpxdVdb::SetDBType] connect to DSN: VMware vCenter with username

    2013-09 - 03T 21: 34:18.800 + 05:30 [03612 error 'utilvpxdVdb'] [VpxdVdb::SetDBType]: database error: ODBC error: (IM002) - data [Microsoft] [ODBC Driver Manager] source name not found and no default driver specified

    2013-09 - 03T 21: 34:18.800 + 05:30 [03612 "Default" error] error obtaining configuration information from the database

    This looks like a problem in the registry for the part of the database or a correctly configured system DSN.

Maybe you are looking for