Run the logic of numbers

Similar Questions

• How do I change the logic LSI Logic SCSI's BUS controller in a prompt Windows 2003 running on ESX 3.5 U4

  I'm unable to find clear instructions on how to change the logic LSI Logic SCSI's BUS controller in a Windows 2003 running on ESX 3.5 U4 prompt.

  If someone could help me I really appreciate.

  Thank you

  Cannot not just off VM, go to the settings on the Hardware tab, Type of SCSI controller, click on modify the type and change of LSI Logic.

• Please run this logic of the string conversion

  One please implement the logic below
  
  I have an input string to be converted by adding "0" when necessary.
  
  Case 1
  
  If the entry is like "3,8,13,18,23,28,33,38,43,48,53,58" and I want the output as '03,08,13,18,23,28,33,38,43,48,53,58'
  
  Case 2
  
  If the entry is like '03,08,13,18,23,28,33,38,43,48,53,58' put it out should be like "03,08,13,18,23,28,33,38,43,48,53,58"
  
  
  Would be greate if someone could implement.
  
  Thank you-

  An option is to add a '0' to each number and remove all numbers 0 to 3 digits in the result:

  with t as (
  select '3,8,9,18,23,28,33,38,43,48,53,58' as s from dual union all
  select '03,08,13,18,23,28,33,38,43,48,53,58' from dual
  )
  select regexp_replace(
            regexp_replace(s,'(\d+)'  -- one or more digits
                                    ||'(,|$)' -- followed by a comma or end-of-string
                                    ,'0\1\2'  -- pad a 0 in front
                                 ),
                                '0(\d\d)'     -- a 0 followed by 2 digits
                                ,'\1')        -- remove the 0
            as s from t
  ;
  

  I guess you will never have 3 digits in your channel.

  Kind regards
  Bob

• How to get the logical processing Page to run?

  I'm a newbie struggling to overcome the learning curve. I created a very simple page that consists of an element (which do not refer to a database object) and a button. After the user enters a value and click on the button, I want to a PL/SQL code block always fire. I created a new anonymous PL/SQL block in the section of the process. See hierarchy of Application Builder below.
  
  The page definition
  Page processing
  Treatment
  Process
  
  The code is very simple.
  
  Start
  HTP.p ("in the custom code. The htp.p message');
  dbms_output.put_line (' in the custom code.) Dbms_output message');
  insert into PT_ERR_LOG (RUN_UNIT_ACTVTY_TXT) values ('in the custom code.");
  end;
  
  It was designed simply to let me know that the code is accessed. When I run the page, however, I'm not either of the messages from the code or y at - it a line written in PT_ERR_LOG (I created this table).
  
  The question is: "why isn't the enforcement code?
  
  In the area of process Point, to the point of process article is set to "On submit - after calculations" and Validations
  The enforcement process is defined on ' once per visit or when Reset.
  
  In the region of Conditions, Type of Condition is "point value / column in Expression 1 is NOT NULL.
  The value of Expression1 is: P6_PGNT_ID, which is the name of the lonely field on the page.
  
  I tried different combinations of values of the Apex in and around the page in the Page processing. What I am doing wrong?
  
  Thank you
  Kim

  In the Conditions region, Condition Type is set to "Value of Item / Column In Expression 1 Is NOT NULL".
  The value of Expression1 is :P6_PGNT_ID, which is the name of the lone field on the page.
  

  That's the problem. The value must not be P6_PGNT_ID: P6_PGNT_ID (remove the colon)

  P.S. Please configure a user name other than 952822.

  Robert
  http://apexjscss.blogspot.com

• the custom transformation does not run against logic model

  Here is the screen [http://img849.imageshack.us/img849/7411/20110530174314002.jpg | http://img849.imageshack.us/img849/7411/20110530174314002.jpg]
  
  In addition to the definition of the logical = object that the script against the relational model. To prove this, have a script to collect all the table names, and have different names in the two models.

  There are scripts works on the logic model - ability to auto create a primary key column when creating an entity?

  Philippe

• How to disable the MIDI to the logic of just my USB key

  Question: Where exactly should I do to disable the MIDI to the logic of just my USB key (I am sending them to another application and do not want it also picked up in L, but don't want any logical MIDI stop). And where does logic to send any MIDI out? I looked at all the prefs I can find, watched dozens of links tuts and docs online, nothing... It's so easy live, sigh!

  TIA!

  Open the environment window

  go to the clicks and ports

  look out on the physical input and find your usb device

  New-> monitor (create this object)

  pull a cable from your usb device on the physical input to the monitor

  That's all

  When you want to run into logic once again simply remove the cable

  get that to work first, then we can discuss outings

• How to replace the logic board MacBook Pro mid-2010

  I have a MacBook Pro 13-inch mid-2010. About once a week, monitors (one who is part of the laptop) and an external will turn grey and freeze. When I turned off the computer, it brings back me to the login screen (I'm under 10.11.5), but I can't move the pointer (whether with my Apple Wireless Mouse or trackpad) to select the icon for my login. After a few reboots, the computer takes care of the password reset function. And there, I can reuse the mouse, select Restart the machine, and I'm back on my way.

  The genius of Apple and I suspect that the problem is with the logic board. Unfortunately, Apple has more parts for MacBook Pro mid-2010. I contacted a few service centers certified Apple the kind told me; None of them can help either.

  Any suggestions for how I have a fix for this problem? Thank you!

  You could contact a specialist to see what their requirement is to send you the

  computer while for a diagnosis appropriate; a specialist is the one who can do all the

  works internally and could actually fix the edge logic that the Mac came with.

  I know some who do this; they charge more than a parts Exchange hosting.

  You can see what a company such as wegenermedia can do. Or see what the

  iFixit guide for Mac (for your specific model) said repair and watch to see who

  part numbers are involved in replacement of the like-kind in refurbished or tested

  OK, from sources such as powerbookmedic.com and other sources used parts.

  The logic board may not be a problem; might be some on the Board of directors or of one which

  attached to, such as the graphics processor. These older models are not

  so difficult for a specialist expert set. While the Mac is able to do so, is a good time

  for they provide labour expertise to swap upgrade replacement parts.

  They can test the feature set and should provide a guarantee for employment.

  Some of these companies repairs also restored the supply of older computers they fixed.

  Good luck & happy computing!

• Disable the snap on the grid of numbers

  I have a late 2009 27 "iMac running the OS X Yosemite 10.11.3.

  I use version 3.6.1 numbers and Pages version 5.6.1

  Where can I turn off the snap on the behavior of the grid and smoothly to an object exactly where I want that he shook to the top or to the bottom of the grid?  I have not found any literature that says how to disable it.

  Any help would be appreciated.

  Thank you.

  Number, select the menu item "numbers > Preferences.

  

  Select the segment "Rulers", then uncheck all the boxes "Show Guides... »

  OR hold down the command key while dragging to temporarily turn off the guides

• Whine of high ground by speakers when using the logic or Garage Band

  Yesterday, I downloaded and installed Logic Pro. During the last part of the installation process my speakers started to whine. It is not very strong, but quite noticeable and irritating. I use these speakers (Alesis M1 Active 520) for years and have never had this problem.

  When I restart, before launching logic, the speakers are silent - which means that there is no groan even when the speakers are turned at full volume. Logic Pro is launched as soon as the whining begins.

  When I go in the preferences in the logic and change the parameters of the device, for example I pass the entrance 'none', the whine disappear momentarily while the changes are applied, then it returns a few seconds later. The only way I can get the groan to stop is to choose one output other than "USB Audio Codec" - which then of course I hear nothing of logic, except through the Mac Mini, built in speaker, other sounds play through speakers normally without any annoying groan.

  Logic Pro to quit smoking will also stop the whine.

  Reminder, my speakers will only commit the groan Logic Pro is running. The moan is noticeable when the speaker (speaker button) is set to a level higher than 30%. I normally set it to about 50-60%.

  I just opened Garage Band and it has the same problem. Final Cut Pro X (and any other programs that I use) but do not.

  Looks like you have found your comments from your Audio input... maybe the built in Mic?

  That switch off in the preferences Audio Logic... by choosing a different input audio and see if that fixes it.

• Why the Pages and Numbers do not use the default printer?

  Recently, I added a second printer to my home network and selected as the default printer. But when I try to print, the correct printer is selected in the dialog box print only part of the time and apparently depends on which application to print from. I believe that Safari, Mail, Contacts and calendar properly use the default printer, then the Pages and Numbers and instead do not the old printer unless I have change the selection in the dialog box impression every time I print.

  How can I get Pages and Numbers to correctly use the right default printer?

  The problem that is happening on my machine (OS X El Capitan 10.11.2, 5.6.1 Pages and numbers 3.6.1) and my wife (running Maverick 10.7.5, Pages ' 08 3.0.3 and Numbers ' 08 1.0.3) and has persisted through a reboot. The old printer is a HP OfficeJet Pro 8600, accessible via WiFi. The new printer is a Brother MFC-7340 connected by USB to a Time Capsule that is accessible via WiFi.

  In the print... dialog you select

  View the Presets...

  in the menu presets. In the sheet drops down, uncheck the box marked

  Reset the Menu Presets for "Default settings" after printing

  Click OK. Then select

  Last settings used

  or a custom preset that you created in the menu.

• Where lives the logic for the types of flow control step?

  For most types of step, the behavior of the type of the step is determined entirely by the configuration of the stage - that is to say, the properties that can be configured in the window type, such as the properties of the step, steps, etc..  But as far as I know, the behavior of the control flow step types (for example, hop, back at the beginning of a block of loop after a late stage) does not seem to be defined by a lower level, flag, attribute or any other configuration item - it seems to be something inherent to the motor TestStand.

  If this is the case, how the TestStand engine knows to provide the functionality for a particular flow control step type?  It runs the appropriate logic based on the name of the step type?  I suspect that this may be the case, because if I create new types of step in copying the types of step ForEach and end without any changes other than to specify the new name for the beginning of the block and end step types, new types of step repeat not the loops as expected.

  Can someone clear this up for me?  Types of flow control step break the model completely define the features by changing the type of step, or I am simply not find relevant configuration items?  I tried to create a new type of end step that allows an expression pre, but it broke my step ForEach (new) type loopback functionality.  Is it possible to do what I want?

  You are right that the engine processes specially the flow control measures. He looks at the name of step type. If you want the same behavior execution, you must keep the original name of type step as a prefix on your step type name, such as NI_Flow_End_CustomizedByMe.

  Also, check out the http://forums.ni.com/t5/NI-TestStand/copy-of-NI-Flow-End-does-not-work/m-p/290170/highlight/true#M88...

  There is the source code that is similar to what the engine makes the steps of flow control. That was the actual code before it moved into the engine. It might be a bit outdated now. I found this on my machine in C:\Program Files (x 86) \National Instruments\TestStand 2010\Components\StepTypes\FlowControl\

• Is there a way to differentiate the string containing the characters and numbers?

  Hello, I created an application to read data from a serial port device. The problem is that the device, at startup, displays a block of text that contain characters describing the device. Shortly after, he displays a command prompt "command:" it's when I want my VI to enter the command to start to take action.

  I was looking at the VISA waiting on the event and looks that could be used to wait for the output device, only a "Serial character", but there is no distinction between the letters and numbers that I can tell.

  If the device is out of numbers in the reading string, of course, no need to enter the command to start to take action once again, which will probably only confuse the device. In this case, I want my VI to continue taking measures with VISA Read.

  The reason is that when I run the application, the device may have already been turned on. Send this command to the device using VISA Write is not necessary at this time.

  Any advice would be appreciated. Thank you.

  This makes it much easier.  In this case, this will do the trick.  You will notice that the bottom of the case does not match even if it has valid values inside.  The only thing that will match if the entire string is of the form XX. XXXX. Incidentally, since we are only matching numbers now, you can remove the "ignore case" Boolean as there is more important.

  

• Use the table of numbers as "item select to compare.

  Greetings,

  I'm curious to know how to use an array of numbers as value in the tab select edit ideally my "case" would execute an expression "Contains(Locals.arrayofnumbers,0)."

  Basic principle:

  1 Labview VI launches with ListBox containing all tests (multiple selections enabled)

  OUTPUT is an array of I32.

  2 I32 table is attributed to Locals.arrayofnumbers

  3 Locals.arrayofnumbers is used with the element select 'compare '.

  4. each CASE has the statement... "next" Contains(Locals.arrayofnumbers,#)

  * each case would have 1 sequence to run *.

  Currently TS throws an error prompt indicating that the Select step expected number, that is the table of numbers.

  I already found a solution quick and pretty clean by instituiting just a condition prior to each sequence and captured to eliminate flow control all together. But I prefer not to use prerequisites for global flow control if possible and use controls to rate as expected.

  I have used TS help, but don't quite give me what I needed. Maybe I didn't use the correct search string. The forum here, is the same. I'm sure that the answer may be there, but maybe I'm using the wrong search string.

  Thanks in advance for any help.

  To SUM UP: User selects (via LabVIEW listbox) 1 - n tests to be run (output table I32). I32 table is used for the selection of the case by evaluating "contains (Local.arrayofnumbers, 0).

  Kind regards

  chazzzmd78

  Honestly, a Select System / box is the wrong choice for what you do.  I'd go with the prerequisite options.  It reduces the number of steps of TestStand.

  In your case you just to see whether something exists or not in a table.  Ideally, you will use the Select operations / box when you have 1 selected option of many.  I suppose you're a loop around the case select so that you can run all the tests so that your code looks something like this:

  For N (N is the number of tests they have selected)

  Select Locals.ArrayOfNumbers

  Briefcase (Locals.ArrayOfNumbers, 1).

  Run test 1

  Briefcase (Locals.ArrayOfNumbers, 2)

  Run the test 2

  Select close

  Closing loop

  If you want to use the Select option / box correctly I would like this:

  Item ForEach in Locals.ArrayOfNumbers (assign the item being Locals.i)

  Select Locals.i

  Case 1

  Run test 1

  Case 2

  Run the test 2

  Select close

  Close ForEach

  I hope that makes more sense.  If you have any questions let me know.

  Kind regards

• Oscillations in the logic controller output blurred

  Hello

  I recently implemented Fuzzy Logic Controller in Labview 8 for the control of a wide process station. I used Compact Point of field (PDC AIO 110) for it to interface with the hardware. Here are some other details

  Entries to FLC: error, derived from the error of the Signal of the level transmitter

  Fuzzification: Max - Min

  Defuzzification: Center of gravity

  Level sensor: capacitive Type level transmitter

  FCE: Control valve

  Data acquisition: cFP2020, PSC AIO110

  Then, when I run the VI... I am able to control the water level in the tank successfully, but there are oscillations in fuzzy logic controller output. The oscillations are so intense and change very adbruptly. I need to fix this oscillations, as this may damage the equipment.

  I am in need of a solution that makes the controller smooth response... Any suggestions? I need to solve this problem as soon as possible, as the deadline for my project work acad is almost

  PS: I do not know if this post is in the right section, if not please move to the appropriate section. Please let me know I'f I need to provide any additional information

  Thanks in advance

  When you do the (k) e - e(k-1), it's an implementation of the oblique action, actually. You can implement by mistake or by using y (k) - (k-1) there also. This would avoid the effect of set point, when you change the target value, it is a mistake that is used by the derived variable.

  To better describe what I mean, please open the example:

  C:\Program Files (x 86) \National Instruments\LabVIEW 7.1\examples\control\fuzzy\tanks.llb\Tanks - control blur PI.vi

  and try to see the screenshots below:

  1 change the boundaries of your function of members associated with the derivative action will make the answer less susceptive to noise. This is where you should focus on the Fuzzy Editor.

  

  2. the filter function is called: PID control entry Filter.vi and this implements a 5th order FIR filter. If you want more on the filtering option, you would have to use the LabVIEW functions for parsing > Signal Processing > filters. Here's how you should use the FIR filter:

  

  3. the speed limiter is called PID output VI rate limit and it is used as:

  

  These are the options that I was discussing.

• Vista 64 how you default to the browser to run as 32-bit Windows. IWant to run the home software to allow a readerthis prgam is 32-bit only compatable.help!

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  http://pietschsoft.com/post/2006/12/Vista-experience-update-Windows-Vista-x64-runs-32-bit-Internet-Explorer-by-default.aspx

  The Internet Explorer shortcut in the Quick Launch toolbar, and in the x 64 Vista Start menu will run the 32-bit version of Internet Explorer by default. Why run the 32-bit version if IE on the 64-bit version of Vista?

  There are actually two shortcuts for Internet Explorer in the "Programs" menu Why two and what is the difference?

  This is the title of each and they run exe:

  Internet Explorer
  "C:\Program Files (x 86) \Internet.

  Internet Explorer (64-bit)
  "C:\Program may Explorer\iexplore.exe.

  One runs IE in the "Program Files (x 86)" folder, this is the 32-bit version. The second is the 64-bit version.

  See you soon.

  Mick Murphy - Microsoft partner