Run the report and form 12 c

Similar Questions

• Run the report to PL/SQL with the branch to another page

  I have an application which, at various times, I run a PL/SQL procedure to perform an action, and then we must run a report while also navigating away from the current page. The actions are performed on a button click.
  
  I tried several methods, but for the life of me cannot get the system to do the two things (ie. run the report and the direction to another page). I tried to put in page 0 (to be executed after the treatment on the click of a button) a branch with a request line to print the report, followed by a branch to the other page (also to run after the treatment on the button click) - and only the branch page 0 runs in fact. Also tried a branch to the other page only, with the print in the request parameter request - but only runs the report, do not create a branch to the other page.
  
  I also tried to put the call to run the report in the PL/SQL code, using utl_http.start_request (url), but that came with a "Bad Request" error. Also tried to use the owa_util.redirect_url call, but also no chance.
  
  I'm pulling my hair out at this time, especially because I am under pressure to get the system in very short time.
  
  Any suggestion would be appreciated.

  You can run queries report of their URL (f? p = & APP_ID.: 0: & SESSION.: PRINT_REPORT =)

  So one approach would be to
  The button click, call a JS function which
  

• 1 use the Ondemand/recall process in order to perform the processing workflow (file selection box)
  
• 2 open the report in a popup (from your IR page)
  
• 3 redirect leaves the IR page to another page?
  ------
  Another approach:
  
• 1. IR report submits the page
  
• 2. in the PLSQL block, you do the treatment
  
• 3. the branch redirects to a URL that would point to the report URL.
  OR
  
• 3. do you have a JS onload which runs only when demand is demand for BUTTON and opens a page that points to the report.
  ------

  Still another way is to use htp.p in PLSQL block which made the treatment of workflow
  So your code PLSQL

  BEGIN
    --Do the workflow processing here
    --End workflow processing
    htp.p('');
  END;
  

• Error running the report

  Hello
  
  I generated a report from the workspace and it works fine for me. There is another admin who tries to run the report and his throws following error for him:
  
  : 5200 error to run the query.
  
  We have the same privileges to the shared services.
  
  I created this new report.
  
  Just to tell you it worked fine when I created the 1st day for us both and is now error throing.
  
  Thank you!

  Hello

  It allows you to preview the POV for the user before running the report.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Evolution of the values displayed in the report and the form editing window

  Hello experts,
  
  I need some advice...
  
  I have a simple little application that shows a table (report and form).
  Now my table has values where I can edit these values.
  
  What I do is when I click on icon small change, I need to change the existing automatically without the user to manually change them.
  
  How can I do it please?
  
  Thank you
  
  Published by: Kevin CK on March 19, 2010 12:23 AM

  You can do this with a process Page or javascript. Depends on your specific needs.

• FRM-41214: cannot run the report during the call to the reports

  Hi all,

  I work with Forms 10g on Windows 7 (local working with OC4j), I have a form with a button calling a report, it's the code for the button:

  declare

  Repid REPORT_OBJECT;

  v_rep VARCHAR2 (100);

  rep_status VARCHAR2 (20);

  BEGIN

  Rep: = find_report_object ('EMPS_BY_DEPTS');

  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_EXECUTION_MODE, batch);

  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_COMM_MODE, SYNCHRONOUS);

  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_DESFORMAT, 'pdf');

  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_DESTYPE, cache);

  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_SERVER, 'repetat');

  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_OTHER, 'paramform = no');

  v_rep: = RUN_REPORT_OBJECT (repid);

  rep_status: = REPORT_OBJECT_STATUS (v_rep); 

  While rep_status in ('MARKET', 'OPENING_REPORT', 'PENDING')

  LOOP

  rep_status: = report_object_status (v_rep);

  END LOOP;

  IF rep_status = "FINISHED" THEN

  WEB. SHOW_DOCUMENT ('/ reports/rwservlet/getjobid ': substr (v_rep, InStr(v_rep,'_',-1) + 1) |'?) "|' server = repetat","_blank"); "

  ON THE OTHER

  message ("error when running report");

  END IF;

  END;

  
  

  I create a report object in the browser of the object with the name ""EMPS_BY_DEPTS "with properties " filename = emps_by_depts.rdf.

  I also have a server with the command server = repetat wserver report
  

  When I press the button to call the report I get this famous 41214 FRM: cannot run the report.

  I tried running the report with rwservlet: http://acer-pc:8889/reports/rwservlet?report=emps_by_depts.rdf & userid=hr/hr@orcl & desformat = pdf & destype = hide & expiry =...

  and it works very well.

  Any idea and thank you
  

  
  

  I do in this case,

  1 - i run report with parameterform = YES (Note: your report is not a form of parameter), so I can see explanation real error report.

  2 - showjobs of report server options

  We use the 11g r2, for 11g r2 reports this link http://: 9002/reports/rwservlet/showjobs? = RptSvr__asinst_1 server , so I can't see error detail.

  10g should be that this option absolutely. but I don't know.

  These can help you.

  Best regards.

• Cannot run the report

  DB and dev 10grel2, xp sp2
  Hi all
  IAM trying to run the report in the form with a button generator
  I used this command to start my server: Server rwserver = "MyServer" auto = Yes and it works well.
  
  I created a report object (report5) on the form that contains the button to run the report.
  When I click on the browser reports node to create the report object, I assigned 'myrep' as the file name of the report, not based on a block of data and then created the report of the scott schema dnames.
  
  then closed the Report Builder without saving it in another format.
  
  then I wrote this code in the when button pressed the shutter:

   
  
  declare 
       rp report_object ;
       v varchar2(90) ; 
  begin 
       rp := find_report_object('report5') ; 
       v := run_report_object(rp) ; 
  end ; 

  -nothing wrong with the code, then I ran the form, you press the button to find out:
  FRM-41214 cannot run the report.
  When I looked at the online help, it tells me nothing but
  Cause: The report server could not run the specified report.
  Action: Check the report server and make sure it is running.
  and I checked and it runs and upward.
  What should I do?
  Thanks in advance

  Check my code and try this code in you touch. I write it given your situation and information provided. You can paste directly into your trigger button.

  DECLARE
  
       v_repid REPORT_OBJECT;
       v_rep VARCHAR2(100);
       v_rep_status VARCHAR2(100);
       v_param VARCHAR2(200) := NULL;
       v_valor VARCHAR2(200);
       v_url VARCHAR2(2000);
       v_repserver varchar2(20) := 'myserver'; -- YOUR REPORT SERVER NAME
  
       v_report varchar2(100) := 'E:\myrep.jsp'; -- YOUR REPORT PATH AND NAME
       /* IF .JSP IS NOT WORK CONVERT IT TO .REP AND TRY */
       v_PARAMETRO varchar2(100) := '';
  
  BEGIN
  
       v_repid := FIND_REPORT_OBJECT('report5'); -- report is an element from object navigator report
       SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_FILENAME, v_report);
       SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_EXECUTION_MODE, BATCH);
       SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_COMM_MODE, SYNCHRONOUS);
       SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_DESTYPE, cache);
       SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_DESFORMAT, 'pdf' );
       SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_DESNAME, v_report);
       SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_SERVER, v_repserver);
       SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_OTHER, 'paramform=no '||v_PARAMETRO);
       v_rep := RUN_REPORT_OBJECT(v_repid);
       v_rep_status := REPORT_OBJECT_STATUS(v_rep);
       WHILE v_rep_status IN ('RUNNING','OPENING_REPORT','ENQUEUED') LOOP
       v_rep_status := REPORT_OBJECT_STATUS(v_rep);
       END LOOP;
       IF v_rep_status = 'FINISHED' THEN
       message(v_rep);
       message(v_rep);
       WEB.SHOW_DOCUMENT(v_url||'/reports/rwservlet/getjobid'||
       SUBSTR(v_rep, INSTR(v_rep,'_', -1)+1)||'?'||'server='||v_repserver, '_blank');
       END IF;
  
  END;
  

  So let me know what you get...

  Ed: I've updated my blog link. You can check the first time, if necessary.

  Published by: HamidHelal on January 21, 2013 12:43 AM

• How I can run a reports of forms

  Oracle Forms 9i
  
  Hai All
  
  How can we run a reports of forms Pls tell the steps or give me some links
  
  
  Thanks in advance
  
  Srikkanth.M

  Oops... Forms 9i, you will probably need to use the run_report_object. I think that run_product was in forms 4 and 6i and out taking in charge after that. It been a long time I used something like that, sorry for the confusion.

  http://www.Oracle.com/technology/products/forms/PDF/10G/frmrepparamform.PDF

  Published by: mcharchuk on March 7, 2010 09:47

• I need a code to run a report a forms on 10G...

  Hello!! I m 6i to 10G migration and I can not run a report... can someone send me a code example to run a report on a form in 10G?
  
  Thank you!!
  
  Kind regards!

  IAM using Javabean in oracle 10 g tun report forms...

  First, create a block with a name control and add a bean with a name
  userid_bean. Click the bean field and change its width and its height
  so that u can not see when you run the form.

  Now use the code when you code to run the report below.

  Declare
  rep_url varchar2 (2000);

  Start

  rep_url: = ' / reports/rwservlet? report = filepath\rep1. RDF' |
  «& desformat=htmlcss&destype=cache&userid=sample/sample@oracle» | '& paramform = yes;

  -Write Log messages to the console of JInitiator forms. The following line must
  -be disabled before running this code in any production environment.

  set_custom_property ('control.userid_bean', 1, 'ADD_USERID',)
  get_application_property (username) | » /'||
  get_application_property (Password). » @'||
  get_application_property (connect_string));

  -writes the cookie

  set_custom_property('control.userid_bean',1,'WRITE_USERID_COOKIE','10g');
  Web.show_document (rep_url, '_blank');

  end;

• Run the report with parameters when, select the Radio button

  HelloW Guys
  
  I run my report with the report parameter form now, I want to when I select a radio button and then check if my only the list value = 1 then run A report if my only the list value = 2 then launch report B
  
  Report A and B contain the same parameter
  
  What can I do?
  
  I am writing this trigger button
  DECLARE+.
  al_button NUMBER; +
  pl_id PARAMLIST; +
  pl_id2 PARAMLIST; +
  START to+.
  IF: type = 'A' THEN+.
  IF: RepType = "1" THEN+.
  * pl_id: = Get_parameter_list ('repPara'); -create a parameter list * +.
  
  IF not Id_null (pl_id) THEN+.
  Destroy_parameter_list (pl_id); +
  END IF; +
  
  pl_id: = Create_parameter_list ('repPara'); +
  
  Add_parameter(pl_id,'PARAMFORM',text_parameter,'NO'); +
  
  * Add_parameter(pl_id,'style_from',text_parameter,:style_from); -passing style ano parameter * +.
  
  * Add_parameter(pl_id,'style_to',text_parameter,:style_to); -passing style not as parameter * +.
  
  * Add_parameter(pl_id,'date_from',text_parameter,:date_from); -passing date as parameter * +.
  
  * Add_parameter(pl_id,'date_to',text_parameter,:date_to); -by the way that date as parameter * +.
  
  * Add_parameter(pl_id,'category',text_parameter,:category); -passing as the parameter category * +.
  
  
  
  Run_product (rapports,'E:\inventory\Dispatch\d_style_wise_dispatch_Stitching_report.rdf ',+)
  asynchronous, runtime, the file system, pl_id, NULL); +
  ELSIF: Reptype = "2" THEN+.
  pl_id2: = Create_parameter_list ('repPara2'); +
  
  Add_parameter(pl_id2,'PARAMFORM',text_parameter,'NO'); +
  
  * Add_parameter(pl_id2,'style_from',text_parameter,:style_from); -passing style not as parameter * +.
  
  * Add_parameter(pl_id2,'style_to',text_parameter,:style_to); -passing style not as parameter * +.
  
  * Add_parameter(pl_id2,'date_from',text_parameter,:date_from); -passing date as parameter * +.
  
  * Add_parameter(pl_id2,'date_to',text_parameter,:date_to); -by the way that date as parameter * +.
  
  * Add_parameter(pl_id2,'category',text_parameter,:category); -passing as the parameter category * +.
  
  
  Run_product (rapports,'E:\inventory\Dispatch\d_style_wise_dispatch_Delivery_report.rdf ',+)
  asynchronous, runtime, the file system, pl_id, NULL); +
  END IF; +
  END IF; +
  END; +
  
  Need help
  
  
  Concerning
  
  
  Wasim Ismail

  Dear Shahzab,

  As the parameters except a report type are the same, you can accomplish this task by comparing the type of report just before Run_product.

  You need to re - write the code as below:

  DECLARE
  al_button NUMBER;
  pl_id PARAMLIST;

  BEGIN
  IF: type = 'A' THEN
  IF: RepType = "1" THEN
  * pl_id: = Get_parameter_list ('repPara'); -create a parameter list *.

  IF this is Id_null (pl_id) THEN
  Destroy_parameter_list (pl_id);
  END IF;

  pl_id: = Create_parameter_list ('repPara');

  Add_parameter (pl_id, 'PARAMFORM', text_parameter, 'NO');
  Add_parameter(pl_id,'style_from',text_parameter,:style_from);
  Add_parameter(pl_id,'style_to',text_parameter,:style_to);
  Add_parameter(pl_id,'date_from',text_parameter,:date_from);
  Add_parameter(pl_id,'date_to',text_parameter,:date_to);
  Add_parameter(pl_id,'category',text_parameter,:Category);

  IF: type = 'A' THEN
  IF: RepType = "1" THEN
  Run_product (rapports,'E:\inventory\Dispatch\d_style_wise_dispatch_Stitching_report.rdf ',)
  asynchronous, NULL to run, the file system, pl_id,);
  ELSIF: Reptype = '2'
  Run_product (rapports,'E:\inventory\Dispatch\d_style_wise_dispatch_Delivery_report.rdf ',)
  asynchronous, NULL to run, the file system, pl_id,);
  END IF;
  END IF;
  END;

  Concerning
  Fassi Fihri

• How to set up to call a report .rep file to run the report?

  I know that we can attach a RDF report to a form of report.
  
  But how to call rep report files? I don't want to fix the reports on Forms.
  
  My name of reports are dynamically from the database.
  
  I defined my sourceDir under engine element in the rwserver.conf file
  
  and place the files of my rep under this directory, restart the report server.
  
  my forms cannot find the report yet.
  
  It reports an error:
  
  * "' FRM-41219: can not find the report: invalid ID." * "
  
  Published by: frank1018 on 8 April 2013 11:51

  There is no difference in calling a file rdf or rep. A rep file is just the compiled version of the rdf.
  If you call your reports with the extension of rdf in the name of the file (myreport.rdf), you have a problem. Just delete the file extension. Now, it won't matter if the file is a file rdf or rep (as long as they are in sourceDir).

  I don't want to fix the reports on Forms.
  My name of reports are dynamically from the database.

  You don't have to join all reports forms. Simply create a report object, without specifying the name of the file. You can do it programmatically:

  v_report_filename := 'Myreport';
  set_report_object_property ( repid, report_filename, v_report_filename); 
  

• Run the report period narrow Exceptions in GL Module (R12.1.3)

  Dear members,
  
  From metalink, I downloaded a document with the title ORACLE FINANCIALS E-BUSINESS SUITE, END of PERIOD to release 12 PROCEDURES_
  
  In this document in accordance with the procedure of the period-end closing GL, I found the step below:
  
  * 9. run the report period Exceptions *.
  It is a new step in the version 12. Accounting General Ledger can run the report period Exceptions to check that there are no exceptional transactions in ledgers auxiliaries and GL and follow up with competent co-workers if all exceptions are identified.
  
  But in the GL Module, I see no connection with the name of close period Exceptions
  
  Can someone please shed some light on the concept above.
  
  Thanks in advance.
  
  Kind regards.

  As said by Vamsi, you must add it... This report is not available in the General Ledger default query group, since it is a dependant of the report on ALS which is essentially at the level of the subledger.
  Under Oracle reference says the same thing...
  A12: It is Possible to close the period when there is not recorded in the system log entries? [566854.1 ID]

  Kind regards
  Ivruksha

• Run the report in a specific folder

  Would it not be possible to add the ability to run the virtual computer report on a specific folder in vCenter?  Our vCenter has folders separated for various departments within our Organization, and it would be useful to be able to run the report on each of these record independently.  I checked through similar scripts in the repository but not found anywhere where this has been done.  Thank you!

  Hello

  No, currently how the script is written, its pretty hard to filter on a file especially vCenter. The script currently travels all ESX(I) hosts in your environment, and then from there, it crosses the VMS in each host out information relavent. It is not impossible, but it requires a bit of code to support change.

  If you are looking for an example of list of virtual machines by a particular VM folder, there is a script in the repo called "listVMByFolder.pl" that can give you a starting point.

  Good luck

• Cannot run the report please help

  Here is my code behind the button to run the report.
  
  declare
  Repid REPORT_OBJECT;
  v_rep VARCHAR2 (100);
  rep_status VARCHAR2 (50);
  BEGIN
  / * If other changes made by najim * /.
  IF: TXTFDATE is null THEN
  message ("Please enter Date of THE '");
  message ("Please enter Date of THE '");
  return;
  ELSIF: TXTTDATE IS NULL THEN
  message ("Please select up HERE '");
  message ("Please select up HERE '");
  return;
  ON THE OTHER
  Rep: = find_report_object ('HISTORY_REPORT');
  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_EXECUTION_MODE, batch);
  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_COMM_MODE, SYNCHRONOUS);
  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_DESTYPE, cache);
  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_DESFORMAT, 'pdf');
  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_SERVER, 'repserver90');
  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_OTHER, 'F_DATE =' |: TXTFDATE |) ' V_DATE =' | : TXTTDATE | "The PHASE =' | : TXTPHASE: ' paramform = no ");"
  v_rep: = RUN_REPORT_OBJECT (repid);
  rep_status: = REPORT_OBJECT_STATUS (v_rep);
  While rep_status in ('MARKET', 'OPENING_REPORT', 'PENDING')
  LOOP
  rep_status: = report_object_status (v_rep);
  END LOOP;
  IF rep_status = "FINISHED" THEN
  / * Display the report in the browser * /.
  WEB. SHOW_DOCUMENT ('http://172.29.3.202/reports/rwservlet/getjobid': substr (v_rep, InStr(v_rep,'_',-1) + 1) |'?) "|' server = repserver90","_blank"); "
  ON THE OTHER
  message ("error when running report");
  END IF;
  END IF;
  END;
  
  
  When I press the button, it gives an error message cannot run the report.

  Open the report server console and check the error here. : http://application-tier server: port/reports/rwservlet/showjobs? Server = REPORTSSERVER

  Published by: Andreas Weiden on 23.07.2011 09:13

• Cannot run the report. Analytics Server Error (1042017): network error

  Hello
  
  I have installed on Linux ODI.
  I start to extract the data of Essbase to Oracle with Hyperion Essbase Data SQL with ReportScript LKM. But after 4 minutes process is stopped with the error:
  com.hyperion.odi.essbase.ODIEssbaseException: cannot run the report. Error (1042017) analytical server: network error: the client or the server timed out while waiting to receive data by using TCP/IP. Check the network connections. Increase the values NetRetryCount or NetDelay in the ESSBASE. CFG file. Update this file on the client and the server. Restart the client, and then try again.
  
  But if I extract some lines process worked well.
  
  I read this forum messages and set NETDELAY = 3600, NETRETRYCOUNT = 1000 in the files:
  
  /Home/EPM/Hyperion/products/Essbase/EssbaseServer/bin/Essbase.cfg
  /Home/EPM/Hyperion/deployments/WebLogic9/servers/HyperionPlanning/webapps/HyperionPlanning/Web-INF/classes/Essbase.properties
  /Home/EPM/Hyperion/common/EssbaseJavaAPI/9.5.0.0/bin/Essbase.properties
  /Home/EPM/Hyperion/products/biplus/appsinfo/WebAnalysis/EssbaseJAPI/bin/Essbase.properties
  /Home/EPM/Hyperion/products/biplus/bin/EssbaseJAPI/bin/Essbase.properties
  /Home/EPM/Hyperion/products/Essbase/APS/bin/Essbase.properties
  /Home/EPM/Hyperion/products/Essbase/EAS/Server/bin/Essbase.properties
  /Home/EPM/Hyperion/products/Essbase/EssbaseStudio/Server/ess_japihome/bin/Essbase.properties
  /Home/EPM/Hyperion/products/Essbase/EssbaseClient/javaapi/bin/Essbase.properties
  /Home/EPM/Hyperion/products/planning/config/Essbase.properties
  /Home/EPM/Hyperion/products/planning/lib/Essbase.properties
  
  But the error occurred.
  
  Help please with this error.

  Well the bug should have been resolved then.
  Your options are to try the V11 essbase japi files, these must be pulled from a facility of V11 or send me an email and I can send you the.
  Or use a different extraction method in the interface.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Find custom oracle reports and forms

  Hi all
  
  I would like to know the names of the tables where I would be able to find all the oracle forms and reports?
  
  Thanks in advance,

  Hello

  I would like to know the names of the tables where I would be able to find all the oracle forms and reports?

  FND_FORM for FND_CONCURRENT_PROGRAMS for reports and forms. More details on these tables can be found at the eTRM site.

  Kind regards
  Hussein