Run the sequence TestStand silently in c# with report

Similar Questions

• The execution of the sequence TestStand in LabVIEW via TS - API: execution different times for the same sequence

  Hello - the members of the Forum.

  I have a problem about the execution of a TestStand sequence into LabVIEW. I created a VI that offers the possibility to choose a sequence TestStand-file and then executes the sequence using the TestStand API. The implementation is based on an example in C++-Application found the following link:

  http://forums.NI.com/T5/NI-TestStand/unreleased-references-using-engine-API-in-C/m-p/2927314#M46034

  The app works pretty solid where the VI is executed the first time. The VI treats the sequence chosen in an acceptable time.

  But where execution is started again, the sequence takes approx. 30 sec more than in the first case.

  So far I have not found a solution and hope someones got a clue about this problem...

  I use 2013 LabVIEW and TestStand 2013.

  I enclose my own VI, a sequence of the specimen with a small sample of VI, so you can reproduce the problem.

  Kind regards

  TobiKi

  
  

• Run the utilities from disk on machine with Yosemite Snow Leopard startup disk?

  I have a 2009 imac that came with Snow Leopard. I've since updated my OS to Yosemite. Should I run the disc from my old snow leopard startup disk utilities or is it a bad idea?

  It is not a 'bad' idea, but it is always best to use the version of disk utility which is part of the OS version installed. Do this by starting the computer from the Recovery HD.

  Fix the hard disk and permissions

  HD recovery start

  Restart the computer and after the chime hold the Order et R keys until the Menu of the utility is displayed.

  Repair

  When the Utility Menu appears, select disk utility and click on the continue button. Disk utility charges and select layouts withdrawal (usually Macintosh HD) entry of the list to one side.  Click the first aid tab, and then click the repair disk button. If disk utility reports any errors that have been corrected, then again run repair disc until no errors are reported. If no errors are reported, click repair permissions . Wait for the process to finish, and then quit disk utility and re-enter the Utility Menu. Select restart from the Apple menu.

• "Error: failed to get the IP address of the destination virtual machine running the converter to assistance server." with a static IP address

  Hi all

  I'm trying to p2v linux 6.4. It fails with the following message is displayed:

  Error: Cannot get the IP address of the virtual destination machine running the converter assistance server.

  I have seen discussions on this message, but they all refer to dynamic IP address, taken from DHCP, as in my case, I use static IP address.

  In the meantime the p2v (which then breaks down...) I open console support machine and saw a message:

  
  

  eth0 is not a recognized interface.

  Can someone tell me what is happening?

  Hello

  I assume you are using converter 5.5. There is a new feature that allows the selection of the network card. However, it works well in the case of Linux P2V. If you have changed the type of adapter, use 'e1000' or 'auto' and try again.

  HTH

  Plamen

• Run the statement in a stored procedure with Out parameters and

  Hi all
  
  I have a stored procedure that calls a select statement. Here it is...
  
  CREATE OR REPLACE PROCEDURE BLABLA_VIEW_PROCEDURE
  
  * (BLABLA_KEY IN NUMBER, *)
  XML_OUTPUT ON VARCHAR)
  AS
  BEGIN
  SELECT SYS. XMLTYPE.getStringVal (OBJECT_VALUE) in XML_OUTPUT FROM BLABLA_VIEW WHERE extractValue (OBJECT_VALUE, ' / BLABLA_TYPE/BLABLA_KEY ') = 2876;
  END;
  
  Is to have both IN and OUT parameters as described above. I am able to compile and run the procedure.
  
  The problem I want to share with everyone is...
  I want to run the stored procedure together with a single EXEC command.
  
  I tried different ways using the EXEC command but of no use.
  
  Could someone help me?
  Thanks in advance.
  
  Published by: user10763276 on June 3, 2010 15:47

  Please visit the following...

  sudhakar@ORCL>CREATE OR REPLACE PROCEDURE BLABLA_VIEW_PROCEDURE
    2  (BLABLA_KEY IN NUMBER,
    3  XML_OUTPUT OUT VARCHAR)
    4  AS
    5  BEGIN
    6  XML_OUTPUT := BLABLA_KEY || ' and whatever else...';
    7  END;
    8  /
  
  Procedure created.
  
  sudhakar@ORCL>
  sudhakar@ORCL>var XML_OUTPPUT varchar2(100);
  sudhakar@ORCL>exec BLABLA_VIEW_PROCEDURE (9151, :XML_OUTPPUT);
  
  PL/SQL procedure successfully completed.
  
  sudhakar@ORCL>print XML_OUTPPUT;
  
  XML_OUTPPUT
  --------------------------------------------------------------------------------
  9151 and whatever else...
  
  sudhakar@ORCL>
  

  Post tells you...

  var OUTPUT VARCHAR
  exec BLABLA_VIEW_PROCEDURE (9151, :OUTPUT);
  print OUTPUT
  

  VARCHAR is not a valid TYPe to declare. Use VARCHAR2 (nnn) where nnn is a number.
  VR,
  Sudhakar B.

• So I installed rollercoaster tycoon 3. When I try to run the game I get a box with the header "" Microsoft Visuall C ++ Runtime library ""Runtime Error! " Program: End of the 3\rct3.exe__abnormal program C:\Program Tycoon3 tycoon

  can you tell me what causes exactly this and any idea on what I can do about it?
  the box indicates that the requirement for video is ATI Radeon 32 MB GeForce 2 or higher. I have the GeForce 8400 Gs

  Hi Merlot_1984

  Welcome to Microsoft Vista answers Forum!

  I suggest that you try to run the game as administrator and verify.

  Right-click on the game, and then click Run as administrator.

  If the problem persists, I suggest that you perform the clean boot, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  (1) perform the clean boot (check the link to perform the clean boot)

  (2) enable half the services

  (3) determine whether the problem returns

  (4) enable half of the startup items

  (5) determine if the problem returns

  (6) repeat the steps above until you find out which program or service is causing the issue

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart.

  Let me know if it worked.

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot run the DSET PE R730xd OM 8.3 report

  Hi all

  You try to run a report DSET using 3.7.0.219 build and get the following error in CentOS 6. The server is a PE R730xd with the OM 8.3 running on it.

  SBLIM-OBA (CIMOM) validation is not successful.

  For installation the DSET successfully, reinstall or upgrade sblim-sfcb for the operating system media.

  I tried to re - install the sblim-OBA, but it did not help. The file says redhat-release Redhat Release for OM works correctly.

  Any help would be appreciated. Can I use the old version 2.2 with no problems.

  OK I fixed the problem. I uninstalled package sblim-sfcb is that with the app DSET and then was able to install DSET locally. I still can't get one to work, but at least I can get what I owe more than Dell.

• Change the sequence of commands to generate two reports by USE with different names.

  I have a special situation for the model of batch processing.

  Each DUT consist of two distinct products that need to be tested as a single unit.

  I can run every USE and generate a test for each report.  -aka. The standard use case works very well.

  However, we would like the records using this method. So I need a copy with a different name for each series.

  The idea behind this is that we have a story running for each half of the UUT. Given that the two halves will probably never meet.

  I looked at the BatchModel.seq and read some of the documentation, but I'm having a hard time to understand what is happening.

  

  I guess the items highlighted above are where the object to measure reports are generated. However, I don't know the mechanism for giving them the names among the Options report-> report menu Pathname file or how to change between these two points in time. Also are there tricks to get the report in duplicate with a different path in this configuration.

  All links to the relevant information would be useful. Thank you

  Just copy these two steps and between them and the copies have another step that is just a statement.  There, you can change the path of the report by setting parameters. TestSocket.ReportFilePath the new path.

  Ideally what you would do, is that the client using a callback.  So, your code would look like this:

  Write the object to measure report

  Write the report of the object to be measured (on the fly)

  Define report path reminder (override in customer OR statement step)

  Write the object to measure report

  Write the report of the object to be measured (on the fly)

  Hope this helps,

• Is it possible to implement the sequences to browse to project with several tables of contents and conditionalized modules

  I use RoboHelp 9 with WebHelp output.

  I have five outings, which one contains help for common functions, while the other four contain help for modules under license. When a user opens a module under license assistance, the user sees the soul help and authorized assistance. In addition, the files are conditionalized so that the unauthorized search a help licensed module brings nothing.

  I have been solving problems with the previous topic and the next topic which, thanks William, I learned are associated with browse sequences. After having tried various configurations, I have a few questions:

  • HR support a sequence to travel alone in a project, even when the project has several outputs & fakes?
  • If HR supports a sequence to browse only, does that mean that there is no way to create a unique navigation for each separate output sequence?
  • If HR supports several sequences of travel, which is the workflow?

  I also maintain a table of 'master' contents which contains all the modules, frequent and without a license. What I've done for now is to autocreate a browse sequence based on the table of contents "master." When I generate the output of a module under license, which is conditionalized, I only see the table of contents for this module and, therefore, can only travel between books and subbooks for this add-on. I also checked that the subjects that do not appear in the module conditionalized as for another module licensed, do not appear in the list of search results either.

  Carol

  Me again, Carol

  You also questions about the functional differences between WebHelp and WebHelp Pro, so let me explain.

  I know only two major differences other than (the additional benefits of analytical feedback reports) and the management of 'Zones' with authentication in RoboHelp Server.

  1. The behavior of browse sequences as explained above
  2. The fact that the categories of content are not supported in WebHelp Pro for this latest version 9.

  In regards to sequences to browse you try to anticipate the various modules (licensed, etc.): multiple browse sequences are included in an single . File BRS. Sequences are defined in the XML code in the single file.

  As a solution (for WebHelp and WebHelp Pro), you could create a Help.brs of the NPM. that you have already created a module; then backup and archive. Then create a change for the different module before generating again. The Help.brs of the NPM. will need to have the same name as your project, so you will have to manage the .brs desired file in the project folder when you build this version. All your other choices (table of contents, Index, conditional tags, etc) remains the same for the respective modules.

  Finally, I notice that you generate apparently WebHelp Pro right now even if you are not published on the server of HR? This is really not the best practice. You must generate WebHelp plain for a web server that has no HR server on it (even if you can be getting away with it). Regarding your concern about "breaking" something; each output is placed in another! SSL! folder automatically when you build, so you should be able to generate WebHelp without interfering with the release of WebHelp Pro. Then, you can republish on the HR using WebHelp Pro Server, whenever the server is ready.

  John Daigle

  Adobe Certified RoboHelp and Captivate instructor

  Evergreen, Colorado

  www.showmethedemo.com

• Whenever Firefox is running the 1st tab is "subject: sessionrestore" with an error message when its judgment. How can I delete it?

  2nd tab is my default and everything works fine.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• Which runs the latest version of Firefox compatible with a MacBook Pro with 2.33 GHz Intel Core 2 Duo OSX 10.5.8?

  I keep says my browser needs updating and it does not work on some Web sites. I had bad experiences in the past trying to update to Apple's OS and Firefox due to compatibility issues. I guess I could go to Safari, but I have been using Firefox for many years and prefer to stick to what I know.

  Firefox 16.0.2 was the last to work on the old Mac OSX 10.5.x as Firefox 17.0 abreast demanded that OSX 10.6 +.

  https://www.Mozilla.org/en-us/Firefox/16.0/system-requirements/
  https://www.Mozilla.org/en-us/Firefox/17.0/system-requirements/

• How can I run two sequences simultaneously on the same object to measure

  I'm turning two sequences in parallel on even the UUT (own USE) so that I can put a piece of equipment to a certain State while starting a timer at the same time.  How can I do this in the sequencer teststand?

  You can run a sequence (or a subsequence if you just need a timer) in a new thread (just choose "use new thread" in the call of the sequence)

• With regard to the update of the sequence

  Hello
  
  We have OGG 11.1.1.1 and 11.2.0.3 DB.
  
  I have a small question about the improved Support of sequence
  According to the documentation:

  Installing new Oracle sequence support 
  Oracle GoldenGate version 11.1.1.1 contains improved sequence support. To enable this 
  support, you must install some database procedures that support the new FLUSH 
  SEQUENCE command. 
  Follow these instructions on the sourceand targetsystems. 
  1.  On the source and target Oracle systems, connect to SQL*Plus as SYSDBA. 
  2.  If you already assigned a database user to support the Oracle GoldenGate DDL 
  replication feature, you can skip this step. Otherwise, on both systems create a 
  database user that can also be the DDL user. 
  SQL> CREATE USER DDLuser IDENTIFIED BY password; 
  SQL> GRANT CONNECT,RESOURCE,DBA TO DDLuser; 
  3.  In the GLOBALS file on the source and target systems (create one if needed), add 
  the following parameter to designate the DDL schema. (If you already have this 
  parameter, skip this step.) 
  GGSCHEMA <schema> 
  4.  On both systems, run the sequence.sqlscript from the root of the Oracle 
  GoldenGate installation directory. This script creates some procedures for use by 
  Oracle GoldenGate processes. (Do not run them yourself.) You are prompted for 
  the schema information that you created in the first step. 
  SQL> @sequence.sql 
  5.  On the source system, grant EXECUTE privilege on the updateSequence
  procedure to a database user that can be used to issue the DBLOGIN command. 
  Remember or record this user. You use DBLOGIN to log into the database prior to 
  issuing the FLUSH SEQUENCE command, which calls the procedure. 
  SQL> GRANT EXECUTE on DDLuser.updateSequence TO DBLOGINuser; 
  6.  On the target system, grant EXECUTE privilege on the replicateSequence
  procedure to the Replicat database user. 
  SQL> GRANT EXECUTE on DDLuser.replicateSequence TO Replicatuser; 
  Immediately after you start the Oracle GoldenGate processes for the first time, issue the 
  FLUSH SEQUENCE command for each sequence (or with a wildcarded name). This 
  command alters the sequence to generate redo data. Replicat uses this redo to create an 
  initial synchronization point. You are prompted for this command in the upgrade steps.

  He mentions several times that you should have 2 users (e.g., DBLOGIN & DDLUser). But we only use a "GGS" to do anything. We have arrays of heartbeat, we use in the dblogin controls everything. It will be a problem during setup of this? Should we change our Setup to support this? I'm asking is because I have no environment to test it myself, so I'd be happy to have some feedback before you ruin my production environment.
  
  Thank you
  NACEUR

  It can be even given it required privileges.

  -Koko

• NEITHER 9481 relay are not locked when running the labview compiled exe on a computer with only installed labview execution?

  I recently bought a cDAQ-9172 with several modules.  One of the modules is a NI 9481 relay module.  I created an application using Labview and built an exe file.  If I run the exe on the computer, it was developed on the relays work properly, that is, they remain locked up until their status is changed.  If I run the same exe on a computer with only the Labview runtime installed (no software installed), the pulse relay contacts and not locked.  I'm using Labview version 7.1 for my development and execution.  Everyone knows about this problem?

  Ignore this announcement, the error stems from a difference between each computer ini-files and has nothing to do with the Labview Labview runtime vs, my bad developer.

• Executes the sequence by programming

  Hello

  I see a problem by running the file in sequence by programming. I mentioned the example VI (C:\Users\Public\Documents\National Instruments\TestStand 2014 (32 bit) \Examples\TestStand API\Executing API\LabVIEW using sequences) comes with TS2014 which crosses the sequence context of sequence by invoking TSEngine so the entries to the VI are sequence context, movie file, the process template.

  To facilitate my task, I modified the code attached to make autonomous running the sequence through TSEngine directly to entries in VI are movie file and the model of process.

  It works fine when I run like VI, but does not work during the conversion into exe.

  Please let me know if I'm something wrong or missed something

  Thanks in advance

  -Vivek

  You should look into the creation of a user interface you want to execute your order by programming. The user interface can be hidden if it works the same as your code is planned. Start with the simple graphic interface "C:\Program Files (x 86) \National 2014\UserInterfaces\Simple\LabVIEW" so see how this can be done.

  More precisely. a person does not open a reference to the engine. What is much more common is a person placing the Application Manager control, call the Start method. and then get the reference to the engine here. Be sure to stop the application subsequently and additional references nearby. I guess because you're in a development environment is the reason that your code works like a VI.