"Error: failed to get the IP address of the destination virtual machine running the converter to assistance server." with a static IP address
Hi all
I'm trying to p2v linux 6.4. It fails with the following message is displayed:
Error: Cannot get the IP address of the virtual destination machine running the converter assistance server.
I have seen discussions on this message, but they all refer to dynamic IP address, taken from DHCP, as in my case, I use static IP address.
In the meantime the p2v (which then breaks down...) I open console support machine and saw a message:
eth0 is not a recognized interface.
Can someone tell me what is happening?
Hello
I assume you are using converter 5.5. There is a new feature that allows the selection of the network card. However, it works well in the case of Linux P2V. If you have changed the type of adapter, use 'e1000' or 'auto' and try again.
HTH
Plamen
Tags: VMware
Similar Questions
-
How to deal with the error "failed to get the kernel function pointer".
I was running smoothly first Pro CC all day today. I stopped at the end of the day and now when I try to launch first yet, only a few hours later, the program will not open and I get the error "unable to get the kernel function pointer. Help!
I run first on a Macbook pro i5 processor at 2.3 Ghz with 16 GB RAM, graphic card 512 MB intel HD 3000 running OS 10.10.3. It worked well (although sometimes a little slowly) for one year. I keep the project file on the portable hard drive, media files on a port firewire 800 Gdrive. It has been working well.
The only thing that happened between the first success today and refusal to open the first tonight, I ran something of card/holiday calendar interactive multimedia for my son that I had installed a few days ago but not yet opened. When he installed Abobe AIR opened and did the installation. To see if this can help, I uninstalled the holiday card and rebooted the computer a couple of times. No dice.
Help! Luke
I have the same problem on several machines. What seems to be the case is first is losing track hence basic audio filters are on the system. The only solution that works for me is uninstalling first, then put it back. I found myself to do this every day or almost.
-
Smartphones blackBerry synchronization error - failed to get the file
BlackBerry Torch 9860 software v 7.0 Bundle 2406
Can someone help me with this error message of synchronization:
"An error occurred during an attempt to access a record of the database of the device."
Details below.
engine 08:46:51.759 waiting for the user to input - message WPF event for messageId 15003 raised read 310 records
08:46:51.762 engine work - full message event for messageId 15003 read 310 records
08:46:51.859 CBBTransBase::GoToRecord - could not get the file FFFFFB45
08:46:51.860 error information: 18008 (00004658) (KnownErrorWithLocalizedText), Description: an error occurred during an attempt to access a record of database device., File:.\BBTransBase.cpp, line: 736
08:46:51.860 CRSyncUtil::GetTranslator: FeedProfileShim2Trans (responsible Trans) BlackBerry
08:46:51.860 CRSyncUtil::FeedProfileShim2Trans: returns 0
08:46:51.860 CRSyncUtil::LogFatalTransError: 'GoToRecord()' 'RimBB' translator for the "Contacts" application API returned empty error
08:46:51.860 CBBTransContact::Close - clean temporary fixation for contacts files
08:46:51.862 CBBTransBase::Close - Mode: 4
08:46:51.862 CBBTransBase::Close - commit the change log
08:46:51.862 CBBTransBase::Close - save information from source database device
08:46:51.976 CBBTransBase::Close - peripheral close database
08:46:51.976 CBBTransChangeLog::Close - close change log db. Record count: 474. Db file: C:\Users\Bob\AppData\Local\Research in Motion\BlackBerry Desktop\XCPCSync.OEM\SyncSDK.209.601\Translators\RimBB\Contract{8BCB53647E24F3BB61A8E73C4FDAB}.adt
08:46:51.990 enter COLTransBase::Close - Mode - 4
Synchronization of end of 08:46:51.991 with error 2Glad to hear it is working now.
Don't forget to let us know if you have any other questions.
-
error: failed to get the value of property 'SetReturnValue': object is null or undefined
Why did I get this error message when I open the weather channel desktop application?
Hi Jimmy'Tidwell.
- Did you the latest changes on the computer?
- You have security software installed on the computer?
Check out the link below for the weather channel support and check if it helps.
Why do I get an error message?
For further assistance, contact the vendor of the software.
http://support.desktop.weather.com/ICS/support/default.asp?deptID=2552
-
Internal error: failed to get the path of the file directory common 64-bit
Help!
I had the worst time trying to figure what to change my path to the registry to resolve this problem. What I discovered Google, I need to change the path to my shared files, it is currently
C:\Program Files (x 86) \Common Files\
(I added the------because I read somewhere it was causing problems with facilities)
I have this problem with some keys:(que toute aide serait grandement appreicated!) plants
Thank you all
This is part of what I have listed in the register-
http://CID-db58e4a03b3dccab.Office.live.com/self.aspx/public/current.jpg
That matches your entries?
Your currently connected user name can navigate at this location and records open to the breast? They can create a .txt file empty which are there?
C:\Program Files (x 86) \Common Files
Is your current user have read permissions for this registry key?
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion
Finally what programs you are trying to install? They are compatible with Windows 7?
-
Original title: Fix it center fails.
Difficulty Center fails with the error:
Unable to get the catalog of the troubleshooter. Error MatsGetSapCatalog failed
I can't find the url of re - download.
It doesn't seem to be at the Download Center.
Thank you
Frank CVista Ultimate 64 bit sp2
-
Error: ORA-16757: failed to get the value of this property
Hi all
I have an error:
DGMGRL > see the database dbname_stb LogXptStatus;
Error: ORA-16757: failed to get the value of this property
I check:
DGMGRL > see the configuration;
Configuration - dbname_dg
Protection mode: MaxPerformance
Databases:
dbname_pr - primary database
dbname_stb - physical of the standby database
Fast-Start Failover: DISABLED
The configuration status:
SUCCESS
drcdbname_stb.log:
RSM0: Received the request the property Get: rid = 0 x 01010000, pid = 54
2012-10-17 15:21:14.702 of database Resource: get the LogXptStatus property
RSM 15:21:14.702 2012-10-17 error: trying to interview a 'LogXptStatus' primary type property on a standby database resource.
2012 10-17 error 15:21:14.702 database resource GetProperty (16501,16757)
I don't understand this error?
Thank you all.Take a look on this
-
When we execute SQLIOSim on a Server Windows 2003 VM hosted on an ESX 3.01 or 3.5 server, you get the following messages:
Error: 0x8007045D
Text of the error: the request could not be performed because of an i/o device error.
Description: Failed to get the info from cache drive to C:\
Anyone know what is the cause or how to solve the problem (if it is a question)?
Thank you
Had the same error and found this blog:
It will be useful.
-
Libretto U100 Bluetooth error message indicates - getting the list of files fail
Hello
I try to connect my Libretto U100 Bluetooth to a new Sony Ericsson mobile software Bluetooth for exchanging information.
I can connect and see the files on the mobile phone, but when I click on the folders, there is an error message indicating "getting the list of files doesn't have."
New drivers must or is there something else I need to set up at all?
Previously, I was able to connect to any other mobile phone with no problems.
Thank you in advance for help you.
Hello
I m sure that it s is not a Bluetooth problem or a cell phone if it s possible to connect Sony Ericsson and other mobile phones. Unfortunately, I'm not very familiar with this laptop but I found this site with FAQ on your mobile phone.
http://www.Ericsson.com/Contact/FAQ.shtml
http://www.Esato.com/Help/FAQ.phpIn addition, you should check the manual of the phone. I sure you will find a description of m
Good luck
Good bye
-
Error - failed to import the certificate - you can fix this here
I get this message when you try to create a new generation.
Error - failed to import the certificate - you can fix this here
I created a new .p12 file, but also a configuration profile. I can't understand why this keep happening. Thanks in advance for any help you can provide.
This error means that the certificate and the private key in the p12 file don't match. Take a look at this post, which describes in more detail the creation and validation of your p12.
I have not watched the certificate remains to be seen if this is indeed the expiration date. Will look at this next...
Unrelated and probably that your certificate has indeed expired.
-
I use D:\MessageQueue4_5\mq\bin\imqcmd.exe to get heads of JMS queues. In most of the facilities, I can retrieve the results without problem.
At a single facility, however, I get an error when you try to run this command. Called with no arguments, it should display a list of available commands. But that's what I get instead:
D:\utilities\imqChk > d:\MessageQueue4_5\mq\bin\imqcmd.exe
Boot process failed.
Could not run
Java
-cp
d:\MessageQueue4_5\mq\lib\imqadmin.jar;
d:\MessageQueue4_5\mq\lib\fscontext.jar
-Dimq.home=d:\MessageQueue4_5\mq
-Dimq.etchome=d:\MessageQueue4_5\mq\... \etc\mq
com.sun.messaging.jmq.admin.apps.broker.BrokerCmd failed to get the exit code of the child.
Other info:
- Java is installed (version 1.7.0_17).
- QBrowser using, I can sign in successfully and retrieve information from queue.
- All of the named files and jar files are where they are supposed to be within the meaning of the doce above.
I was not able to locate the source of the problem. Any ideas would be greatly appreciated.
Thank you.
I had this same problem and solved by editing the file \glassfish3\mq\etc\imqenv.conf manually by setting IMQ_DEFAULT_JAVAHOME as follows:
IMQ_DEFAULT_JAVAHOME = / Files/Java/jdk1.7.0_45 program
Note the orientation of the slash. It's on Windows, and when I used with Windows style slash escape sequence, it does not solve this problem only when I used the mangled Unix style done.
Hope this helps,
-Noah
-
I'm trying to mount a NFS on ESXI 6 volume, but continue to operate in the error. Googling everything nothing helped, so I'm here. Error:
Call "HostDatastoreSystem.CreateNasDatastore" of object "ha-datastoresystem" on ESXi '192.168.xx.xx' failed.
Operation failed, the diagnostic report: failed to get the path of the console for the volume, the name of the sample.
The NFS share is located on a synology nas. I checked the permissions and configuration. Everything seems correct based on the various boards and KB articles.
Ideas?
Thank you.
Find the esx.conf file in/etc/vmware.
If you could also share a copy with me...
Try to mount the NFS VMware KB: Volume fails with the error: could not resolve the host name
Check the link as well below.
-
How do I remove * error: failed to get cell value * in EN?
is it possible that I can delete * error: failed to get cell value * financial reports... ?
I use TxtCase and its gives me this error on the support of point of details...
How to remove it... ?
Thank you!
You can try to delete the advanced, clear the error.
Using the advanced in conditional removal Option
Concerning
Celvin
-
Hello
Can someone guide me how to solve this error? vCenter service is not getting started, I looked in the newspapers vpxd and found the following error.
vCenter Service was able to start with the error failed to create the front of SINGLE sign-on: vmodl.fault.SystemError
Thank you
John
Hi John,.
This is due to host on the vCenter server entries. Please try the procedure below
Connect to the vCenter server, edit the/drivers/etc/hosts file in Notepad
C:\Windows\System32\drivers\etc\hosts
# 127.0.0.1 localhost
Note: If a line does not exist in the hosts file, add it at the end of the text.
#) to remove the comment from the line of IPv4.
- 127.0.0.1 localhost
· Save and close the file.
- localhost127.0.0.1.
- GoTo services.msc and start VMware Virtual Center Services.
Thank you
Venance
- 127.0.0.1 localhost
-
Failed to get the disk partition information when you add the new data store
Hello
Update my ESX to version 4 Update 1 (4.0.0, 256968). Now, I'm trying to add a new data store to a cluster in vCenter and receive the following error message when I will review the current structure of the disc "error when configuring the host: failed to get the disk partition information. When I click back, then next, there's no error message but in the formatting window, I get the error "Object reference" not set to an instance of an object.
I see this question has been asked before, but I can't seem to find an appropriate response. Anyone? The interface using CLI instead of vCenter isn't an option (alignment VMFS, workload and so on)
I use Dell R900 with an EMC Symmetrix VMax SAN
The size of the LUN I want to add is 741 GB
Concerning
Marius Aulie
If you have a virtual machine for Windows test, you could do the following, to ensure that the logic unit number has a clean partition table:
-set the LUN as a GROSS physical to virtual machine device
-Run diskpart, select the drive and run the CLEAN command
-detach the LUN to the virtual machine
-try to create the data on the LUN VMFS store
The size of the block of the data store where the VM test can be a problem with the above. Due to the size of the LUN, the size of the block of the data store must be at least 4 MB. Attach the LUN to a physical test system could be an alternative.
André
Maybe you are looking for
-
Problem intermittent boot Tecra S2 after pressing the power button
Hi allI have a Tecra S2 with the 6600go GFX card.The machine is large but presents the following problem. After that the machine was interrupted for a while it will start not reliable.You press the power button. Either as soon as you release the powe
-
Note of Lenovo K4 Marshmallow Bugs
1. name changed to Lenovo Vibe X 3 phone2. managing bad ram: 1 GB Max available 1.73. alley brilliant ligher (cannot even feel)4 USB OTG: pendrive is not detected5 Doesnt show details external sd memory meets inner.6. Chinese recovery7 battery drain
-
Windows 7 is no longer auto sleep
My Windows 7 computer won't auto standby on its own. I had the computer since a year and a half and this was not a problem until the last two weeks. If I manually press the sleep button, he falls asleep, but after letting it sit on the computer for t
-
Disable auto-capitalisation in text field
I do a text field, but I don't want the first letter capitalized. None of the types of entry is not really what I want. It was suggested in another thread that define addresses worked and do not add a symbol or .com to the keyboard (http://supportfor
-
have and eps file extensions for Adobe stock
By the 10 free images for the first month, without realizing it, I downloaded three images that have extensions of I / eps. It seems that the only images that I can work with are jpeg images. I guess that's because I have other Adobe products like Il