Run the specified case the value found in the table

Similar Questions

• The table at the bottom of table border

  When I run the table on the next page, the lower part of the table border disappears. It seems that at the end of the table. The table that I use is as long as 5 pages and the border does not appear until page 5 (last page).

  I can apply the cell style to the line at the bottom of page. However, I wonder if there is that a gap Indesign automatically applies the border at the end of each page?  Thank you

  There is no way to make it automatic. The border settings are supposed to be around the entire table (which in your case is deep 5 pages).

  You may be able to create a cell style and change only the background race to match the appearance of the border. Then apply it to the lower cells of each page.

• Unable to display data for the date where there is no entry in the table

  Hello
  
  I need a urgent, described below:
  
  I have a table named as 'dirty', consisting of three columns: empno, sale_amt and sale_date.
  (Please ref. The table with data script as shown below)
  
  Now, if I run the query:
  "select trunc (sale_date) sale_date, sum (sale_amt) total_sale of the sales group by order trunc (sale_date) by 1.
  It then displays the data for the dates there is an entry in this table. But it displays no data for the
  date in which there is no entry in this table.
  
  If you run the Table script with data in your schema, then u will see that there is no entry for the 28th. November 2009 in
  sales table. Now the above query displays data for the rest as his dates are in the table of the sale with the exception of 28. November 2009.
  But I need his presence in the result of the query with the value "sale_date' as '28. November 2009 "and that of"total_sale"as
  « 0 ».
  
  Y at - there no way to get the result I need?
  
  Please help as soon as POSSIBLE.
  
  Thanks in advance.
  
  Create the table script that contains data:
  ------------------------------------------
  
  CREATE TABLE SALE
  (
  NUMBER EMPNO,
  NUMBER OF SALE_AMT
  DATE OF SALE_DATE
  );
  TOGETHER TO DEFINE
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (100, 1000, TO_DATE (DECEMBER 1, 2009 10:20:10 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (100, 1000, TO_DATE (NOVEMBER 30, 2009 10:21:04 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (100, 1000, TO_DATE (NOVEMBER 29, 2009 10:21:05 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (100, 1000, TO_DATE (NOVEMBER 26, 2009 10:21:06 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (100, 1000, TO_DATE (NOVEMBER 25, 2009 10:21:07 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (200, 5000, TO_DATE (NOVEMBER 27, 2009 10:23:06 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (200, 4000, TO_DATE (NOVEMBER 29, 2009 10:23:08 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (200, 3000, TO_DATE (NOVEMBER 24, 2009 10:23:09 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (200, 2000, TO_DATE (NOVEMBER 30, 2009 10:23:10 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (300, 7000, TO_DATE (NOVEMBER 24, 2009 10:24:19 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (300, 5000, TO_DATE (NOVEMBER 25, 2009 10:24:20 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (300, 3000, TO_DATE (NOVEMBER 27, 2009 10:24:21 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (300, 2000, TO_DATE (NOVEMBER 29, 2009 10:24:22 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (300, 1000, TO_DATE (NOVEMBER 30, 2009 10:24:22 ',' DD/MM/YYYY HH24:MI:SS'));))
  COMMIT;
  
  Any help will be necessary for me
  
  
  Kind regards

  WITH tab AS
    (SELECT TRUNC(sale_date) sale_date,
      SUM(sale_amt) total_sale
       FROM sale
     GROUP BY TRUNC(sale_date)
     ORDER BY 1
    )
   SELECT sale_date,
    NVL(total_sale,0) total_sale
     FROM tab
     model
     REFERENCE refmodel ON (SELECT 1 indx, MAX(sale_date)-MIN(sale_date) AS daysdiff , MIN(sale_date) minsaledate FROM tab)
       dimension BY (indx)
       measures(daysdiff,minsaledate)
     main main_model
     dimension BY (sale_date)
     measures(total_sale)
     RULES upsert SEQUENTIAL ORDER ITERATE(1000) until (iteration_number>refmodel.daysdiff[1]-1)
     ( total_sale[refmodel.minsaledate[1]+iteration_number]=total_sale[cv()] )
  ORDER BY sale_date
  

  using a clause type

  Ravi Kumar

• Auto refreshing display objects when the new line in the table inserted on another computer

  Greetings,

  I'm using an application of ADF JDeveloper 11.1.2.4.0 its been used by 2 separate computers.

  It's the same application, but I shared with security ADF for the person (Secretary) will see the half view of the application

  and the other person (doctor), the other half seen. Basically, I put adf username expression (rendering) for each display mode

  the specific menu, buttons, tabs, etc.

  My problem is, say the Secretary, creates a doctor's appointment, rather than re - run display objects

  every X minutes on the advice of the doctor, is there a way to notify the application that the new data are inserted into the database and must be re/refresh-execute?

  I have about 100 objects from view and I don't want to discount/re-execute all objects from view because I don't know on what table a new record its been inserted.

  Appointment is just one example, there are many paintings that both views are connected to.

  Hello

  Here is the solution to your needs: http://matthiaswessendorf.wordpress.com/2010/01/22/flexible-active-data-service/.

  Instead of the pop-up window in the sample you would be re - run the table of appointment. Now all you need is a mechanism that informs the change, which may be a trigger in the database or application that updates the new appointment

  Frank

• Projects merged not appearing is not in the table of the contents of WebHelp

  By following the instructions on the site Grainge, I created a project merged with the following folder structure:'
  
  BAM\parent-> location of the parent project
  BAM\Child\Project1-> location of the child
  BAM\Child\Project2-> location of the child
  BAM\Child\Project3-> location of the child
  
  I added the metatag redirecting the first topic in the project relative to the default theme in Project1.
  
  When I generated the output:
  
  I received a nested together images of navigation as well as the IE error msg say it blocked the execution of ActiveX content.
  
  The correct TOC books, one for each project, did see as part of external navigation. However, once I clicked to allow content to run, the table of contents would disappear. When I went to IE tools, Options and select to allow ActiveX run from the hard disk, the error stop appearing, but the TOC has disappeared entirely.
  
  I had the extra set of frames of nav to disappear by disabling the nav option in Project1 and when I built it.
  
  Thanks for the tips.
  
  
  
  
  
  

  OK, my bad. The parent project is striking TOCs, I defined in the child projects.

  What confused me was the first time that I have generated the parent project and the child projects, but before I had defined the Mall anywhere (in the parent or child, except of course for the project merged into the parent TOC entries), I saw, for a fraction of a second, in short a book displays for each * collects I know not what it was , but I thought it was by design.

  PS I've used the article on your site grainge as my main source of information.

• When I run the program I get a message "error loading C:\windows\dhax40.dll the specified module is not found.

  I have Windows XP service pack 3.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.

  A Google search on the name of the file means no "hits" which makes things even more suspicious.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it
  .  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

• Desktop Windows Manager is disabled and the theme service is not running. Error 126: the specified module is not found. »

  I tried to install VistaOSX the theme of this site http://vista-os-x.en.softonic.com/. My current theme of vista disappeared and he turned to classic windows. I'm not able to activate Desktop Windows Manager. Error code I get everything by starting the service theme is "Windows could not start the service theme on the local computer. Error 126: the specified module is not found. »

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  Mick Murphy - Microsoft partner

• MSE says that I have to run Defender in order to remove found threats. I can't launch the Defender, it keeps closing

  MSE says that I have to run Defender in order to remove found threats.  I can't launch the Defender, it keeps closing

  MSE says that I have to run Defender in order to remove found threats.  I can't launch the Defender, it keeps closing

  Suppose MSE wants that you run Windows Defender in offline mode (RDO), which is not the same as the defender of Windows that is installed on Win 7 and is disabled when MSE (and other anti-malware programs are installed.  Yes, it's very confusing.

  http://securitygarden.blogspot.com/2012/04/understanding-Microsoft-anti-malware.html

  In any case, see below for information about the RDO:

  You may need to use one or more of the following scanners in offline mode - you'll need to burn a CD using another computer and change the sequence of starting your computer to run the scan - instructions are provided with the links:

  http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline

  http://www.BitDefender.com/support/how-to-create-a-BitDefender-rescue-CD-627.html

  http://www.freedrweb.com/LiveCD/

  http://support.Kaspersky.com/viruses/RescueDisk?level=2

  I hope this helps...

• Error on startup: "Error loading C;\windows\apakahubozerahe.dll the specified module is not found."

  Whenever I start my PC, you receive this error message; "Error loading C;\windows\apakahubozerahe.dll the specified module is not found.   How can I get rid of this? I can't find the file in c: Windows to remove and my registry cleaner does not clean it?

  He does not seem to cause any trouble and disappears when OK is hit.

  Hi Kevin!
  Click on this link: http://www.scanwith.com/Autoruns_download.htm download & install it. (It is a secure reliable software). You can keep it for future use if you choose.
  1. after the download is complete, select autoruns & right click on it
  2. click on "extract here".
  3. on the extracted files, click "autoruns" application select it & right click and click"Open or run"& click OK or Yes if the process of ptompted by an administrator to complete the installation.
  4. what which is complete, Open or run "autoruns".
  5. in the opened window, click 'all'.
  6. on all programs that says 'file not found' select each & every one of them, click on one at a time...
  7 right-click & click delete & ok

  He helped?

• RUNDLL - error loading c:\windows\wrypap.dll - specified module cannot be found, this happens after the windows xp registry.

  RUNDLL - error loading c:\windows\wrypap.dll - specified module cannot be found, this happens after windows xp registry

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.

  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.

  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.

  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• After the message "error loading c:\windows\ulavodej.ddll specified module is not found.

  When the computer receive following message:

  "error loading c:\windows\ulavodej.dll specified module is not found."

  any help to fix this would be appreciated.

  Looking for errors like this by doing a search on Google for the name of the file.  Usually, they turn up without success.

  When a search in no hits or suspicious hits result, the answer is usually that the file in question is linked to the malicious software and your anti-malware application has deleted or quarantined file, but left to the Windows registry entry that tries to start the malicious software when you start your computer.

  First of all, download, install, update and run full scans with two of these free analytical tools:

  MalwareBytes AntiMalware
  SUPERAntiSpyware

  Do not run the scans at the same time.  They can take some time, so start an and then go for a non computer chore for awhile.

  If the scans does not solve the problem (and they can't, because the actual malware file has already been processed), then download and run Autoruns.  Click on the "Connection" tab and look in the column 'Image path' for the dll named in your error message.  If it is not displayed in the connection tab, click the "all" tab and use the file > search tool.  A characteristic of the search of Autoruns tool is that you must move the selection under the element line "found" before you "Find Next."

  Once you find the line with the file in question, either "delete" or (if you want to be safer) uncheck the box.  The latter prevents the line running, but you can reactivate it later by removing the check mark.

• I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

  I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

  Hello

  I googled this file pofusido.dll and it could be caused by a virus.

  I would suggest that you disable the restore mode as viruses use it to reinstall set apart them.

  Download and install the free http://www.malwarebytes.org/

  Restart the computer and keep pressing F8 to get into safe mode with network connection.

  Once you have updated Malwarebytes run and see if it can remove the virus.

  So delete all cookies in your internet Explorer.

  Please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul

• error starting buvoemd.dll: "the specified module is not found." (please help. some of my games have not worked since this error has been appearing after start)

  This error has been appearing after starting:

  "Error loading C:\WINDOWS\system32\buvoemd.dll".

  The specified module could be found.

  Can we fix this or send me a copy of the module or anything like that?

  (please help some of my games do not have given that this error has been appearing after start)

  Thank you

  There is no file with this name in Windows XP.  It was probably part of a virus or spyware infection that has been partially removed. Run a full scan for virus/spyware.  If the problem persists, use the free Windows Sysinternals Autoruns tool to find and remove the reference to the file.

  For more information about how to use the Autoruns, please see:

  Autoruns for Windows Windows Sysinternals Autoruns Forum

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Error message: "error loading C:\Users\Sue\AppData\Local\WMPDBDL.dll the specified module is not found."

  I have an error message box that always appears at the start of my computer.  It says: "Error loading C:\Users\Sue\AppData\Local\WMPDBDL.dll the specified module is not found." I have a Dell Laptop Inspiron 1720 running Vista. I just 'X' it out and continue on but would like to get rid of it.  I don't know that it's touched something that needs correction.  Thank you

  Hello

  Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Error loading C:\...".dll" the specified module is not found.

  For the last two days, whenever I start my calculation I have two pop up with two different paths "dll" error messages  the message indicates that the ' specified module could not be found.  How can I fix it?

  Hello

  Good luck which is malware then please do a thorough check. Following message will show how
  to delete a startup message.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Flash Player error: THE SPECIFIED MOUDLE IS NOT FOUND

  I am facing a problem when I open my flash memory

  It is said:

  Rundll

  There was a problem starting

  THE SPECIFIED MOUDLE COULD NOT BE FOUND

  How can I solve this problem?

  Original title: Rundll

  Hello

  Thanks for joining us out on Microsoft Community Forums.

  From your post, it seems that you are unable to access the USB key and it gives you an error: the specified module could not be found.

  1. The USB Flash works fine in another computer?
  2. Have you tried any other USB on your computer?

  You can try the following steps and check the result.

  Method 1: You can try to run the hardware and devices Troubleshooter and check if it makes a difference:

  If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: However, it could be a virus, I would also say that you to download and run the last scan Microsoft security on USB flash and check if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  You can also check out the link below and follow the suggestions of SpiritX MS MVP responded on August 20, 2010:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/specified-module-cannot-be-found/287433d7-330e-4c7c-b0b8-796cd43caeb6

  Let us know if it helps. If you have other questions related to Windows please keep us informed and we will be happy to help you.