running a report of hyperlink
I'm under Oracle Developer suite 10 g on Windows. I have a report that contains a hyperlink. Now, I want that when the user clicks this hyperlink, a new report should be run. Can someone guide me as what I should write in the hyperlink my said domain property to run the report.Thank you.
Hello
It was just an example... There are several ways to work around these problems. I use "Key Mapping" to incorporate all of these parameters in the 11g environment.
Check "publishing reports on the Web with Services of Oracle 11 g Release 1 (11.1.1) B32121-02 reports" on key mapping.
See you soon
LS
Tags: Oracle Development
Similar Questions
-
run the report using hyperlink
Hello
I'm working on oracle forms & reports 10g. I have an oracle (RDF) report generating a pdf file. I have create a hyper link that opens a text file. It works very well.
but I want to know is - it possible that, in my hyperlink other rdf, run and create another output on screen or as a file.
because my reports generate all the numbers that I create the hyperlink, I want to know how to generate a hyperlink when my use a specific number employee click on another run of rdf and show his personnel information.
concerningsuperdba wrote:
Hello
I am working on oracle forms & reports 10g. I have an oracle (RDF) report generating a pdf file. I have create a hyper link that opens a text file. It works very well.
but I want to know is - it possible that, in my hyperlink other rdf, run & create another exit on screen or as a file.
because my reports generate all the numbers that I create the hyperlink, I want to know how to generate a hyperlink when my use a specific number employee click on another run of rdf & show his personnel information.concerning
Hi superdba
There is a great link on the web. Check the report Hyperlink;)Hope this helps
Hamid
-
You try to run a report to view the comments of the CPU usage in vFoglight 6.0
I am trying to run a report to view the comments of the CPU in vFoglight 6.0 usage, as I have a couple of VMs that seem to cause problems. I want to see what that levels of CPU for a while inside the virtual machines, but I only seem to be able to find the data in the reports for the use of the host processor.
Any help is welcomeIf you want to use canned reports, which I think will work for what you ask, there is a pre-built for you.
Home > reports > report > select the right model under all report templates ("using the virtual machine CPU and time ready" looks like the report that you want to")
for the service should work the vCenter. This will send you all the hosts and any use of the VMs UC over what period you set (default is 4). -
FRM-41214: cannot run the report during the call to the reports
Hi all,
I work with Forms 10g on Windows 7 (local working with OC4j), I have a form with a button calling a report, it's the code for the button:
declare
Repid REPORT_OBJECT;
v_rep VARCHAR2 (100);
rep_status VARCHAR2 (20);
BEGIN
Rep: = find_report_object ('EMPS_BY_DEPTS');
SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_EXECUTION_MODE, batch);
SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_DESFORMAT, 'pdf');
SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_DESTYPE, cache);
SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_SERVER, 'repetat');
SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_OTHER, 'paramform = no');
v_rep: = RUN_REPORT_OBJECT (repid);
rep_status: = REPORT_OBJECT_STATUS (v_rep);
While rep_status in ('MARKET', 'OPENING_REPORT', 'PENDING')
LOOP
rep_status: = report_object_status (v_rep);
END LOOP;
IF rep_status = "FINISHED" THEN
WEB. SHOW_DOCUMENT ('/ reports/rwservlet/getjobid ': substr (v_rep, InStr(v_rep,'_',-1) + 1) |'?) "|' server = repetat","_blank"); "
ON THE OTHER
message ("error when running report");
END IF;
END;
I create a report object in the browser of the object with the name ""EMPS_BY_DEPTS "with properties " filename = emps_by_depts.rdf.
I also have a server with the command server = repetat wserver report
When I press the button to call the report I get this famous 41214 FRM: cannot run the report.
I tried running the report with rwservlet: http://acer-pc:8889/reports/rwservlet?report=emps_by_depts.rdf & userid=hr/hr@orcl & desformat = pdf & destype = hide & expiry =...
and it works very well.
Any idea and thank you
I do in this case,
1 - i run report with parameterform = YES (Note: your report is not a form of parameter), so I can see explanation real error report.
2 - showjobs of report server options
We use the 11g r2, for 11g r2 reports this link http://
: 9002/reports/rwservlet/showjobs? = RptSvr_ , so I can't see error detail._asinst_1 server10g should be that this option absolutely. but I don't know.
These can help you.
Best regards.
-
What is the best way to run the report of jasper in the ADF Applications?
Mr President.
What is the best way to run the report of jasper in the ADF Applications?
Concerning
Tender Hello,
Check out these links
Sameh Nassar: Using Jasper report in Application of ADF (detailed)
-
Hi gurus,
I get the following error at the whe Workspace, you try to run a report EN to the workspace:
Query error: error: internal error Essbase JAPI: [cannot perform view cube operation. ] [ Essbase Error (1013289): command [MdxReport] failed due to memory allocation failure]
This is the first time happened in this environment and I already checked the free memory space and everything seems fine.
Could someone help me on this?
Thanks in advance
concerning
To the right...
I found the solution after reading the article on https://blogs.oracle.com/pa/entry/epm_11_1_2_ulimit
Thank you
-
Hi all
I use this code to run a report of my form, it runs successfully:
DECLARE V_PARM PARAMLIST ; TYPE ADT_REC_TYPE IS RECORD (V_VISIT_ID VARCHAR2(90) , V_ORG_NO VARCHAR2(90) ) ; ADT_REC ADT_REC_TYPE ; TYPE ADT_TAB_TYPE IS TABLE OF ADT_REC_TYPE INDEX BY BINARY_INTEGER ; ADT_TAB ADT_TAB_TYPE ; BEGIN :NUMBERS_BLOCK.VISIT_ID := 'AND V.VISIT_ID IN (-1'; :NUMBERS_BLOCK.ORG_NO := 'AND V.ORGANIZATION_NO IN (-1' ; GO_BLOCK('ALL_ADMITTED_PATIENT') ; FIRST_RECORD; LOOP IF :ALL_ADMITTED_PATIENT.CHECK_PAT = 'Y' THEN ADT_TAB(:ALL_ADMITTED_PATIENT.NUM).V_VISIT_ID := :ALL_ADMITTED_PATIENT.VISIT_ID ; ADT_TAB(:ALL_ADMITTED_PATIENT.NUM).V_ORG_NO := :ALL_ADMITTED_PATIENT.ORGANIZATION_NO ; :NUMBERS_BLOCK.VISIT_ID := :NUMBERS_BLOCK.VISIT_ID||','||:ALL_ADMITTED_PATIENT.VISIT_ID ; :NUMBERS_BLOCK.ORG_NO := :NUMBERS_BLOCK.ORG_NO ||','||:ALL_ADMITTED_PATIENT.ORGANIZATION_NO ; END IF ; EXIT WHEN :SYSTEM.LAST_RECORD = 'TRUE' ; NEXT_RECORD ; END LOOP ; :NUMBERS_BLOCK.VISIT_ID := :NUMBERS_BLOCK.VISIT_ID||')' ; :NUMBERS_BLOCK.ORG_NO := :NUMBERS_BLOCK.ORG_NO ||')' ; FOR I IN ADT_TAB.FIRST .. ADT_TAB.LAST LOOP V_PARM := GET_PARAMETER_LIST('REPDATA'); IF NOT ID_NULL(V_PARM) THEN DESTROY_PARAMETER_LIST(V_PARM); END IF; V_PARM := CREATE_PARAMETER_LIST('REPDATA'); Add_Parameter(v_parm,'P_VISIT_ID' ,TEXT_PARAMETER, :ALL_ADMITTED_PATIENT.VISIT_ID); Add_Parameter(v_parm,'P_LEX_VISIT_ID' ,TEXT_PARAMETER, :NUMBERS_BLOCK.VISIT_ID); Add_Parameter(v_parm,'P_ORGANIZATION_NO' ,TEXT_PARAMETER,:ALL_ADMITTED_PATIENT.ORGANIZATION_NO); Add_Parameter(v_parm,'P_LEX_ORG_NO' ,TEXT_PARAMETER, :NUMBERS_BLOCK.ORG_NO); --Add_Parameter(v_parm,'P_ORGANIZATION_NO' ,TEXT_PARAMETER,ADT_TAB(I).V_ORG_NO); END LOOP ; RUN_REPORT('MRPLYLST',TO_NUMBER(:GLOBAL.LANGUAGE_ID),V_PARM ,'OCX_BLOCK.OCX'); END ; -------------------
: NUMBERS_BLOCK. VISIT_ID has a similar condition (and in v.visit_id (23,24,545).
: NUMBERS_BLOCK.ORG_NO is a condition as (and v.org_no in (01) for example
and they are sent to a lexical parameter in the report.
but when I try to run the Report Builder with params even, it runs empty?
Why?
I don't know that I filled the same parameters with values?
Thank you
Thank you, it is resolved,
I ran the report in report designer and open the form.
I don't know what the problem is if it happens, but I'm sure that was the problem.
Thank you
-
"a regular basis" to run a report form 11g
I'm migration 6i c/s to 11g web app.
I will have some difficulty in understanding how reports work now:
In 6i, I used to code calls with run_report_object or even run_product built-ins, and the report went straight to the user's screen or printer.
(Now I have seen that you can not send it directly to the printer, but we can live with that).
Now I use the solutions I've read discussions like this:
https://community.Oracle.com/thread/2184172
My work is as follows:
PROCEDURE Pf_Run_Report_Object (p_report_id REPORT_OBJECT) IS l_report_server varchar2(100); l_rep_out VARCHAR2(100); l_report_job_id VARCHAR2(100); l_report_status varchar2(100); l_wait date := sysdate + (5/1440); Begin tool_env.getvar('REPORTS_SERVER_NAME', l_report_server); IF l_report_server IS NULL THEN Raise Form_Trigger_Failure; END IF; Set_report_object_property(p_report_id, REPORT_SERVER, l_report_server); Set_Application_Property(CURSOR_STYLE, 'BUSY'); l_rep_out := RUN_REPORT_OBJECT(p_report_id); l_report_job_id := Substr(l_rep_out, instr(l_rep_out,'_',-1)+1); l_report_status := REPORT_OBJECT_STATUS(l_rep_out); WHILE sysdate < l_wait AND l_report_status IN ('RUNNING','OPENING_REPORT','ENQUEUED') LOOP l_report_status := REPORT_OBJECT_STATUS(l_rep_out); END LOOP; IF l_report_status = 'FINISHED' THEN WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid='||l_report_job_id||'?server='|| l_report_server,'_blank'); ELSE MESSAGE('Report error: '||l_report_status); END IF; Set_Application_Property(CURSOR_STYLE, 'DEFAULT'); End Pf_Run_Report_Object;
All hardcoded that names of statutes and the property url... seem like a bug ticking. Also the loop 5 min... Don't like.
It works... but it seems so crappy that I can't believe this is the usual way to simply run a report:
How do you call a report in form 11g?
I would recommend that you start here:
Here's what happens:
1. your forms application requests that a report (rdf, rep, etc.) is executed. (Running is not identical to present)
2. once the report is run and the data has been retrieved, the output is stored on the file system of the server in the format that you define (html, pdf, etc.)
3. your Forms application can now retrieve the complete report when desired using the JobID reports. WEB. SHOW_DOCUMENT is most often used, but other extraction methods are possible.
As to why you coded a timer in the code, I can't speak for it, but you don't need. Yet once again, refer to the doc above and it will explain how to launch and retrieve a report.
-
the search for a solution to run foglight report online cmd
Hello
I'm looking a solution to run the report (based on a model of fms server) foglight in the cmd line. (via groovy or fglcmd or another way)
The goal is to start a relationship with some of the arguments when a fire of specific rule.
Someone has an idea?
Kind regards
Eric.
Hello
This thread seems to have information on what you are looking for: http://communities.quest.com/message/53728
Condition of a rule or a script related to a rule action can run this API. Be careful though, as the condition can trigger several times causes a performance issue when the report is run several times in parallel.
Concerning
Nils
-
Run the report period narrow Exceptions in GL Module (R12.1.3)
Dear members,
From metalink, I downloaded a document with the title ORACLE FINANCIALS E-BUSINESS SUITE, END of PERIOD to release 12 PROCEDURES_
In this document in accordance with the procedure of the period-end closing GL, I found the step below:
* 9. run the report period Exceptions *.
It is a new step in the version 12. Accounting General Ledger can run the report period Exceptions to check that there are no exceptional transactions in ledgers auxiliaries and GL and follow up with competent co-workers if all exceptions are identified.
But in the GL Module, I see no connection with the name of close period Exceptions
Can someone please shed some light on the concept above.
Thanks in advance.
Kind regards.As said by Vamsi, you must add it... This report is not available in the General Ledger default query group, since it is a dependant of the report on ALS which is essentially at the level of the subledger.
Under Oracle reference says the same thing...
A12: It is Possible to close the period when there is not recorded in the system log entries? [566854.1 ID]Kind regards
Ivruksha -
DB and dev 10grel2, xp sp2
Hi all
IAM trying to run the report in the form with a button generator
I used this command to start my server: Server rwserver = "MyServer" auto = Yes and it works well.
I created a report object (report5) on the form that contains the button to run the report.
When I click on the browser reports node to create the report object, I assigned 'myrep' as the file name of the report, not based on a block of data and then created the report of the scott schema dnames.
then closed the Report Builder without saving it in another format.
then I wrote this code in the when button pressed the shutter:
-nothing wrong with the code, then I ran the form, you press the button to find out:declare rp report_object ; v varchar2(90) ; begin rp := find_report_object('report5') ; v := run_report_object(rp) ; end ;
FRM-41214 cannot run the report.
When I looked at the online help, it tells me nothing but
Cause: The report server could not run the specified report.
Action: Check the report server and make sure it is running.
and I checked and it runs and upward.
What should I do?
Thanks in advanceCheck my code and try this code in you touch. I write it given your situation and information provided. You can paste directly into your trigger button.
DECLARE v_repid REPORT_OBJECT; v_rep VARCHAR2(100); v_rep_status VARCHAR2(100); v_param VARCHAR2(200) := NULL; v_valor VARCHAR2(200); v_url VARCHAR2(2000); v_repserver varchar2(20) := 'myserver'; -- YOUR REPORT SERVER NAME v_report varchar2(100) := 'E:\myrep.jsp'; -- YOUR REPORT PATH AND NAME /* IF .JSP IS NOT WORK CONVERT IT TO .REP AND TRY */ v_PARAMETRO varchar2(100) := ''; BEGIN v_repid := FIND_REPORT_OBJECT('report5'); -- report is an element from object navigator report SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_FILENAME, v_report); SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_EXECUTION_MODE, BATCH); SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_COMM_MODE, SYNCHRONOUS); SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_DESTYPE, cache); SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_DESFORMAT, 'pdf' ); SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_DESNAME, v_report); SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_SERVER, v_repserver); SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_OTHER, 'paramform=no '||v_PARAMETRO); v_rep := RUN_REPORT_OBJECT(v_repid); v_rep_status := REPORT_OBJECT_STATUS(v_rep); WHILE v_rep_status IN ('RUNNING','OPENING_REPORT','ENQUEUED') LOOP v_rep_status := REPORT_OBJECT_STATUS(v_rep); END LOOP; IF v_rep_status = 'FINISHED' THEN message(v_rep); message(v_rep); WEB.SHOW_DOCUMENT(v_url||'/reports/rwservlet/getjobid'|| SUBSTR(v_rep, INSTR(v_rep,'_', -1)+1)||'?'||'server='||v_repserver, '_blank'); END IF; END;
So let me know what you get...
Ed: I've updated my blog link. You can check the first time, if necessary.
Published by: HamidHelal on January 21, 2013 12:43 AM
-
Run the report in a specific folder
Would it not be possible to add the ability to run the virtual computer report on a specific folder in vCenter? Our vCenter has folders separated for various departments within our Organization, and it would be useful to be able to run the report on each of these record independently. I checked through similar scripts in the repository but not found anywhere where this has been done. Thank you!
Hello
No, currently how the script is written, its pretty hard to filter on a file especially vCenter. The script currently travels all ESX(I) hosts in your environment, and then from there, it crosses the VMS in each host out information relavent. It is not impossible, but it requires a bit of code to support change.
If you are looking for an example of list of virtual machines by a particular VM folder, there is a script in the repo called "listVMByFolder.pl" that can give you a starting point.
Good luck
-
I can run the report using the client. But when any user tries and it works via the workspace we get:
<? XML version = "1.0" encoding = "UTF-8"? >
< BpmResponse action = "" type = "error" > "
< code > 0 </postcode >
< desc >; nested exception is:
java.rmi.UnmarshalException: error demarshalling return; nested exception is:
java.io.InvalidClassException: com.hyperion.reporting.properties.PovProperties; incompatible local class: stream classdesc serialVersionUID = 2904510004932374854, local class serialVersionUID =-1387329505542936014 < / desc >
< / BpmResponse >Did you reinstall activities or apply patches recently? I saw this when I have patch a multi server environment where the report server had a patch level, but the en web had the old patch level. I inspect the sizes and dates of your financial report on different server jar files to make sure they match.
Nick
-
Cannot run the report please help
Here is my code behind the button to run the report.
declare
Repid REPORT_OBJECT;
v_rep VARCHAR2 (100);
rep_status VARCHAR2 (50);
BEGIN
/ * If other changes made by najim * /.
IF: TXTFDATE is null THEN
message ("Please enter Date of THE '");
message ("Please enter Date of THE '");
return;
ELSIF: TXTTDATE IS NULL THEN
message ("Please select up HERE '");
message ("Please select up HERE '");
return;
ON THE OTHER
Rep: = find_report_object ('HISTORY_REPORT');
SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_EXECUTION_MODE, batch);
SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_DESTYPE, cache);
SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_DESFORMAT, 'pdf');
SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_SERVER, 'repserver90');
SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_OTHER, 'F_DATE =' |: TXTFDATE |) ' V_DATE =' | : TXTTDATE | "The PHASE =' | : TXTPHASE: ' paramform = no ");"
v_rep: = RUN_REPORT_OBJECT (repid);
rep_status: = REPORT_OBJECT_STATUS (v_rep);
While rep_status in ('MARKET', 'OPENING_REPORT', 'PENDING')
LOOP
rep_status: = report_object_status (v_rep);
END LOOP;
IF rep_status = "FINISHED" THEN
/ * Display the report in the browser * /.
WEB. SHOW_DOCUMENT ('http://172.29.3.202/reports/rwservlet/getjobid': substr (v_rep, InStr(v_rep,'_',-1) + 1) |'?) "|' server = repserver90","_blank"); "
ON THE OTHER
message ("error when running report");
END IF;
END IF;
END;
When I press the button, it gives an error message cannot run the report.Open the report server console and check the error here. : http://application-tier server: port/reports/rwservlet/showjobs? Server = REPORTSSERVER
Published by: Andreas Weiden on 23.07.2011 09:13
-
Run the report to PL/SQL with the branch to another page
I have an application which, at various times, I run a PL/SQL procedure to perform an action, and then we must run a report while also navigating away from the current page. The actions are performed on a button click.
I tried several methods, but for the life of me cannot get the system to do the two things (ie. run the report and the direction to another page). I tried to put in page 0 (to be executed after the treatment on the click of a button) a branch with a request line to print the report, followed by a branch to the other page (also to run after the treatment on the button click) - and only the branch page 0 runs in fact. Also tried a branch to the other page only, with the print in the request parameter request - but only runs the report, do not create a branch to the other page.
I also tried to put the call to run the report in the PL/SQL code, using utl_http.start_request (url), but that came with a "Bad Request" error. Also tried to use the owa_util.redirect_url call, but also no chance.
I'm pulling my hair out at this time, especially because I am under pressure to get the system in very short time.
Any suggestion would be appreciated.You can run queries report of their URL (f? p = & APP_ID.: 0: & SESSION.: PRINT_REPORT =
) So one approach would be to
The button click, call a JS function which
- 1 use the Ondemand/recall process in order to perform the processing workflow (file selection box)
- 2 open the report in a popup (from your IR page)
- 3 redirect leaves the IR page to another page?
------
Another approach:
- 1. IR report submits the page
- 2. in the PLSQL block, you do the treatment
- 3. the branch redirects to a URL that would point to the report URL.
OR
- 3. do you have a JS onload which runs only when demand is demand for BUTTON and opens a page that points to the report.
------Still another way is to use htp.p in PLSQL block which made the treatment of workflow
So your code PLSQLBEGIN --Do the workflow processing here --End workflow processing htp.p(''); END;
- 1 use the Ondemand/recall process in order to perform the processing workflow (file selection box)
Maybe you are looking for
-
iPad 4... Update ios10
Hello world I've just updated to ios 10 on my ipad 4, now when I have it on charge, I do as I write this, which has developed next to the sign of the battery is "not supported" the sign of the battery remains white, unlike when it turns green when th
-
Open the address book by clicking on ' to THE ' in new message
I've been using Windows Live Mail and when you click on 'FOR' in a new message, the address book opens. I switched to Thunderbird and want the same function. It is not that.Is there a way to get this feature? OS: 8.1Thunderbird: 31.6 Thank you very m
-
Webcam no longer works on my Satellite U405D-S2874
So yesterday I video chat with someone on my Toshiba laptop - model: Satellite U405D-S2874 - and then today I went on Skype and he wonâ? allow me to video chat! So I went to the camera assistant software and it says 'Webcam driver open failed. "Pleas
-
When prompted to save I have wrong says no - how to cancel that and recover the doc
I did some work on book - 2 hours of writing - I had been clicking without butter for spelling so when it comes time to save the changes I clicked on none and lost what I wrote - I know its here somewhere, but the question is - can I get it back?