Running a script to simulate a mouse click on a point

Similar Questions

• When I press any key on my keyboard, my mouse click but the pointer move.

  My computer is a Gateway NV53 with Windows 7.  My mouse pad is a Synaptics TouchPad V7.2.  Whenever I press any of the buttons on my keyboard, if I play a game or not, it "replaces" the ability to move the pointer.  I find nothing in any of the menus "Control Panel > mouse properties > device settings > settings...". ' who have yet set.  That maybe somebody has some ideas about how to "disable" the "substitution"?

  Found this on techsupportforum.com and this worked for me...

  "Posted by kaufmann91 .

  Great success!

  One of my friends understood the problem.
  Go to control panel and the properties of the mouse, click on the device settings tab and select "Synaptics TouchPad". Click settings, and it should bring up another window.

  In the list select Pointing > sensitivity > PalmCheck and by default, the bar is more to the right, between Minimum and Maximum, slide the bar completely to a Minimum and the problem should be solved! You can now move the pointer when you type. : D »

• In facebook, I get a error message box asking to stop "running this script. I have to click Yes or it will damage my computer. How can I stop this "SCRIPT" and what is it?

  I have an older browser. If I disable the compatibility mode, what would you do? Please, I beg you! What should I do to stop this script to run at facebook?

  Hi Jacqueline,.

  What browser do you use?

  If you turn off your Internet Explorer compatibility view, some Web sites may appear to be blank or will not display correctly.

  If you receive the error message in Internet Explorer, you can follow this link and check if the problem persists:

  How to troubleshoot the script errors in Internet Explorer on Windows computers?

  Hope the helps of information.

• I am still getting script errors, it says inside you still want to run this script error page yes or not I click No.

  I always get script errors on the bottom it says you want to keep running on this page scripts Yes or not I click No.

  Hello

  1 how long have you been faced with this problem?
  2 did you recent hardware or software changes to your computer before this problem?
  3. What is the accurate and complete error message the script?

  If you get the script at startup error then try to perform the clean boot on the computer.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135

  Please refer to the below link mentioned before asking your question so that you can provide all the relevant information for us to help you:
  http://support.Microsoft.com/kb/555375

• Is it possible to record mouse clicks by using a script, so it can be used in an action?

  I'm doing an action that aligns the tool clone between two identical images stamp. To align the Clone Stamp I first alt-click on the image source, Ctr-Shift-Tab to return to the destination image, then click on the left button of the mouse.

  The action is not able to save the last mouse click. Would it be possible to create a script which gives a left mouse click on and then bind that to a button so it can be inserted into the action? In fact, I think that it would also have to include the part of "alt-click on ' so, because even though I can save this step in the action, it seems not work if I manually and then create the left mouse click on (IE, images are not aligned properly).

  The steps that I have in my work are:

  1 double 1 document

  2. Select duplicate and set the radius 1 pixel (using a preset)

  and what I'm doing now is manually alt-click to select the source of duplication, then ctrl-shift-tab to return to the destination document and then left click mouse. Is it possible to click alt + mouse click, ctrl-shift-tab, so that it can be inserted into the script action?

  In an action, you can save strokes if you do not install the scriptlistener plugin. The option will be grayed out if you install Adobe plugin scriptlinener.  Actions that do not use this option can save its tool use, but stocks don't work well on the same size documents.  You may be able to switch between two open documents with document previous and next steps in such an action.  I have install the scriptlistener plugin lose the ability of tools Records is a small loss. IMO. I think that the two short cuts could be use Ctrl + Tab and Ctrl + Shift + Tab should be able to be registered for previous and next, they seem to record for me.

  

• Run a script by clicking on a button panel

  Hello

  I am very new scripting in after effects and in general.
  Several months ago I write several small scripts to speed my work flow. I have run it through the "Launching pad" script Panel.
  Now, I have my scripts in my own panel but miss me properties to bind the part "script" and the "part of the group.

  For the Panel, I have (just one button for now):

  ---------------

  win = new window ('window', 'new project', [0,0,500,500], {Center:true,});})

  but_1 is Win.Add ("Button", [33,16,103,36], "Sharpen3Way");.

  Win.Center ();

  Win.Show ();

  ------------------

  and my previous script that operate independently.

  ----------------

  myComp = app.project.activeItem;

  Select the composition active

  app.beginUndoGroup ("sharpness 3 Way");

  Starting group Undo

  mySolid01 = myComp.layers.addSolid ([100,100,100], "Whet", myComp.width, myComp.height, 1);   Layer of United Nations Adds solid

  mySolid01.adjustmentLayer = true;	En transforms the solid layer of setting
  mySolid01.label = 5;	Sets the color of a layer of setting
  mySolid01.opacity.setValue (40);	Change the opacity of the layer

  myEffect = mySolid01.property("Effects").addProperty ("Unsharp Mask") .name = "Unsharp Mask wide";

  Adds an effect on this layer

  myEffect = mySolid01.Effects.property ("Unsharp Mask Large") (1) .setValue (10);

  myEffect = mySolid01.Effects.property ("Unsharp Mask Large") (2) .setValue (40);

  myEffect = mySolid01.property("Effects").addProperty ("Unsharp Mask") .name = "Unsharp Mask Medium";

  Adds an effect on this layer

  myEffect = mySolid01.Effects.property ("Unsharp Mask Medium") (1) .setValue (65);

  myEffect = mySolid01.Effects.property ("Unsharp Mask Medium") (2) .setValue (1);

  myEffect = mySolid01.property("Effects").addProperty ("Unsharp Mask") .name = "Unsharp Mask Fine";

  Adds an effect on this layer

  myEffect = mySolid01.Effects.property ('Unsharp Mask Fine') (1) .setValue (95);

  myEffect = mySolid01.Effects.property ('Unsharp Mask Fine') (2) .setValue (0.5);

  app.endUndoGroup ();

  Dispose of end group

  ---------------------------

  How the relationship to run the script, when I click on the but_1 ("Sharpen3Way")

  Thank you.

  Hello

  If you have a lot of paperwork and they are short like that, you can turn them into functions and in, click events, the function is called.

  A little off topic but I think it is important, to (1) avoid type windows showcase, pallets are better, (2) you must use the keyword "var" in the declaration of new variables,

  (3) to make attachable take a look at the tutorials from David Torno ([tutorial] after effects ExtendScript written Script).

  Edit: And also (4), you must use matchNames (or index) return to properties, not English name. If you give this script to someone who doesn't have an AE I English, this probably will not work

  For example myEffect should be instead: myEffect = mySolid01.property("ADBE_Effect_Parade").addProperty ("ADBE blur Mask2");

  Xavier.

  (function(){
  
      var win, but_1, but_2;
  
      win = new Window("palette","new project",[0,0,500,500],{resizeable:true,});
      but_1=win.add("button",[33,16,103,36],"Sharpen3Ways");
      but_2=win.add("button",[33+100,16,103+100,36],"Sharpen0Way");
      but_1.onClick = sharpen3Ways;
      but_2.onClick = sharpen0Way;
      win.center();
      win.show();
  
      function sharpen3Ways(){
  
          var myComp, mySolid, myEffect;
  
          // Selectionne la composition active
          myComp = app.project.activeItem;
  
          if (myComp instanceof CompItem){
              app.beginUndoGroup("Sharpen 3 Way");                  // Start Undo Group
  
              // Ajoute un layer Solid
              mySolid01 = myComp.layers.addSolid([100,100,100], "Sharpen", myComp.width, myComp.height,1);
              mySolid01.adjustmentLayer = true;                                                                                                      // Transforme le Solid en Adjustement Layer
              mySolid01.label = 5;                                                                                                                            // Attribue la couleur d'un Adjustement Layer
              mySolid01.transform.opacity.setValue(40);                                                                                                          //  Change l'opacité du Layer
  
              // Ajoute un effet  sur ce calque (unsharp mask)
              myEffect = mySolid01.property("Effects").addProperty("Unsharp Mask");
              myEffect.name = "Unsharp Mask Large";
              myEffect(1).setValue(10);
              myEffect(2).setValue(40);
  
              // Ajoute un effet  sur ce calque (unsharp mask)
              myEffect = mySolid01.property("Effects").addProperty("Unsharp Mask");
              myEffect.name = "Unsharp Mask Medium";
              myEffect(1).setValue(65);
              myEffect(2).setValue(1);
  
              // Ajoute un effet  sur ce calque (unsharp mask)
              myEffect = mySolid01.property("Effects").addProperty("Unsharp Mask");
              myEffect.name = "Unsharp Mask Fine";
              myEffect(1).setValue(95);
              myEffect(2).setValue(0.5);
  
              app.endUndoGroup();                // End Undo Group
              }
          else{
              // ignore or send some alert
              };
          return;
          };
  
      function sharpen0Way(){
          alert("About to do something, ... dont know yet what.");
          };
  
      return;
      })();
  

• Run the script automatically when Windows goes into hibernation or wakes up?

  Hello

  I use the group policy feature in Windows XP to run scripts automatically when you open a session or logoff.

  But it is also possible to make a script run automatically, whenever a Windows-xp machine is about to Hibernate? And also when it wakes up from hibernation?

  The clues how to proceed?

  A funny hibernation is that if you put into hibernation and power then upwards and don't 'do' nothing - like press a key or move the mouse (just to sit and watch), in 300 seconds (5 minutes), XP will go back into Hibernation automatically.  Try it!

  XP does because after it comes out of Hibernation, if XP detects that there is nothing to 'do', he thinks he might be from Hibernation by accident and goes back to "sleep" and said "why you wake me up?

  That's why when people hibernate during the night and their machine turn on the morning he wakes up, they make their coffee or breakfast and return later to see that they have the power of their machine again.  If they think something is wrong, but things are working as expected.

  One way to fix this, is to use a third-party tool that uses the command line to simulate a mouse movement.   It is enough to prevent the rehibernating while you are on XP.

  To simulate a movement of the mouse as soon as your system is equipped with Hibernation, you will need to download the nircmd.exe file.

  There are many other utilities of vouchers on NirSoft main page:
  http://www.NirSoft.NET/

  To simulate the movement of the mouse, download the file nircmd.exe here

  http://www.NirSoft.NET/utils/nircmd2.html

  Put the nircmd.exe file in a folder which is somewhere in your path (c:\windows\system32, etc.) or consult the path in your command file. I put the nircmd.exe file in my c:\tools folder where I keep other things.

  If you do not have Hibernate enabled in your Power Options, tab hibernation, it will put your system on Stand-By instead of Hibernation.

  Create a batch file (I called mine hibernate.bat and put the nircmd.exe in my c:\tools folder) and put this line in your hibernate.bat file:

  off @echo
  Powrprof.dll, SetSuspendState c:\WINDOWS\system32\rundll32.exe Hibernate
  c:\tools\nircmd.exe 10 10 movecursor
  movecursor-10 c:\tools\nircmd.exe - 10

  Save the new file hibernate.bat on your desktop or somewhere, you can retain and double-click it to run the batch file.  When you are sure that it works very well, and then drag the new desktop icon to your quick launch area (to the right of the button start), change the icon, rename, etc, so it looks a bit better and then you can click on new quick launch when icon to call the file hibernate.bat.  Now just remember to use the hibernate.bat file (which could be on your desktop with a nice icon) instead of the menu to turn off the computer.

  The first command will put the system into hibernation, and then when XP comes from hibernation (even days later), run the following commands in the batch file.  These last two commands will simulate a slight mouse movement and who will deceive XP into thinking there is a reason to get out of hibernation and it will not go back to sleep.  Then when you come back from your coffee, your system is always waiting for you.

  If your case, your hibernate.bat might look something like:

  off @echo
  order 1 run before hibernation
  2 run before hibernation command
  order 3 to run before hibernation

  Powrprof.dll, SetSuspendState c:\WINDOWS\system32\rundll32.exe Hibernate

  order 4 to run when coming out of hibernation
  command 5 to run when coming out of hibernation
  order 6 to run when coming out of hibernation

• TypeError: try to run the script compilation and go on a 'mistake' in scope cleared when message returns the transfer through images for each image. Does not affect viewing.

  TypeError: try to run the script compilation and go on a contour

  Above the error message appears when moving between images - back and forth. By clicking on the OK button removes the error message and there is no apparent problem. The window that appears refers to a JAVA Script Application (I guess that FIREFOX is the application?)

  -> Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems

  Check and tell if its working.

• How to simulate a right-click in LabVIEW

  I write code in LabVIEW to record the activities of the mouse for example move, click on the mouse and the right click of the mouse to the left.  I'm able to reproduce the movement by dragging and click of a mouse., but the right click of the mouse to the left.  Can someone show me how to simulate a RIGHT mouse click in LabVIEW?  Thank you very much.

  Son

  Have you looked into the case of the structure of the event time-out?

• Do a right mouse click on the name of the file causes Windows Explorer stop.

  Do a right mouse click on the name of the file causes Windows Explorer stop.

  The problem is sometimes caused by a third-party extension. ShellExView can be useful to see what shell extensions have been introduced in the Explorer. Lire read on this topic, then scroll down to download the x 86 (32-bit) or x 64 (64 - bit) version here near http://www.nirsoft.net/utils/shexview.html

  When you run it, click the column of company for sequence entries in alphabetical order. Suppose Microsoft entries are in good faith and focus on others. Is something listed that is useless or unknown? If so, select it and click the Red (on top left) task to turn it off. You can find it easier to disable them all and then reactivate (green area) one at a time and try to explore until the culprit is found.

• Slow response to the combination of keys or mouse click

  reaction time on a combination of keys or mouse click on may be on 5 minutes.no other jobs being able to develop undertaken.am beard waiting for movement

  Original title: slowmo.reactions

  Hello Bryan,

  Thanks for posting your query in Microsoft Community Forum.

  1. It was working fine before? If YES, then you did important equipment or modifications to the software on the computer before this problem?
  2. What is the brand and model of your system?

  The slowness of your system may be due to various reasons, including viral infections, interventions of third-party software or a hardware problem with the mouse or the keyboard. So, to refine the diagnosis, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Step 1: Try to start your system in a State of services necessary to the operation and a minimum set of drivers enabled, called Safe Mode.
  Start your computer in safe mode http://Windows.Microsoft.com/en-in/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  Step 2: If the system works fine in safe mode, try to clean the system startup:

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to reset the computer to start as usual after a repair.

  Method 2:

  The issue may be due to an infection by the virus. So, you can also run the Microsoft Safety Scanner to make sure that the computer is free of infections:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  For more information, see:

  Mouse, touchpad and keyboard with Windows problems

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Simple mouse click randomly acts as a double click

  For some time now, on my system, whenever I click (left or right) with my mouse, it works as I double-clicked. It is a random behavior and is not always the case.

  Sometimes I can go a few minutes without getting that kind of behavior, but it seems that the more I use my mouse (click wise County), gets this more aggressive behavior. It generates a lot of click mouse (and high-low) messages from windows with a single click.

  By dragging the items with the mouse or the selection of several elements with the mouse has become a nightmare. When I click and drag the mouse on the desktop for the selection rectangle, it breaks and restarts the selection several times until I come to the end of the selection rectangle.

  I don't know that this is not a problem with the mouse device. I have faced this problem with mouse devices replaced, too. Looks like a virus to me. I used a lot of free anti-virus and analytical tools to scan my computer for viruses. Some of them detected a few threats and I removed all threats. I regularly run windows Defender (complete analysis) every week, but he found nothing. I even install AVG (2013) test and scanned my computer but none of these tools have been able to eliminate this problem.

  I also deleted and installed the drivers, restore by default and so on.  Early on that I thought mouse click Springs had failed, but managed to eliminate this possibility.  Virus cleaning etc is also without effect.  (Microsoft virus tools, btw, are probably the most useless; they rarely or never found anything).

• "Cannot run the script at line 1. File or folder does not exist. »

  Whenever I have start AfterEffects, I get an error as he is looking to find my recent projects.  The error is as follows: "unable to run the script at line 1. File or folder does not exist. "I haven't changed the location in one of my project files.  It's the same external drives that I use for months.  When I click on OK the same window opens several times and then finally the historic window opens completely blank and empty.  I am able to reopen projects however since the RECENT PROJECTS drop in the top bar.  It is a very strange and disturbing behavior.  In addition, I always use 13.7.2 because when I go to update it is impossible to connect and gives me this error.  I sat with Adobe support for an hour today, and we couldn't understand.  As I am in the middle of major projects, I decided to not update, but this error at startup is very worrying.  Someone has an idea of what could go wrong or how I can fix this?

  Thank you very much for your time.

  -Fredo

  

  Ok!  Just got a response and an Adobe technical support solution.  The problem is that there is a problem with these versions of sequels (and I found the same problem in first to my horror this morning as well!) and the last couple Mac OSs.  The solution is to close the window "library".  It is then normally.  Apparently they fixed in the last update, but I found the same problem on my second computer, which has been updated.  Anyway, if anyone has this problem, close your cc library window.  Voila.

• Running SQL scripts on different databases

  Hello!

  At my work we have many databases on a server. I have to make a request so that users can run the application on a selected database SQL scripts.

  So my question may be separated into 2 sections:

  1 - is possible to let users SQL scripts run directly from the application?

  I think a database to create a page that displays the list of all the SQL scripts, that we want to use, and when you click on a specific script name in the list, it asks something like "Where the database you want to run the script?", and then, as confirmed by the user, it would show results running the script on a different page.

  is 2 - possible to let users choose what database to run these scripts?

  Any information would be helpful, I'm at the beginning of the project and am not sure at all about how to proceed, or if it is at all possible.

  Thank you!

  Fallen_Kaede wrote:

  Thanks for the quick response. I confirm that we are talking about databases on a server.

  The request is to "debug" to other databases. For example, be run scripts to the locks on the list, to show the different indexes on a table, etc. to help diagnose problems.

  It looks like the 'users' are DBA who should use OEM/Grid Control to do so.

  1 - is possible to let users SQL scripts run directly from the application?

  Lol the only way to run scripts in the APEX is the use of the SQL Scripts for SQL workshop component.

  The key word in your question is 'application '. SQL * more and Developer SQL are applications that allow users to run SQL scripts on the desktop. Scripts SQL is an APEX integrated application that allows developers to run SQL scripts on the web. However, there is no documented way supported for end users to run SQL scripts in a custom of APEX application that you created. Therefore, rethink your approach. Rather than create an application APEX runs scripts, you must convert the scripts in PL/SQL, APEX packages, pages, components and applications leverage features of the APEX and reports, graphics and interactivity (e.g. exploration links; timed refreshes etc.). This will give you a user experience improved, beyond what is possible using static SQL scripts.

  is 2 - possible to let users choose what database to run these scripts?

  The APEX applications would exist on an instance of the APEX in a database and access other databases using the database links (which can have a performance impact). It would be possible to create a LOV based on the view of the USER_DB_LINKS dictionary and use in a selection set to a global page list to provide a control to set the current context of the database. Region data sources will have to be generated dynamically in the packages of PL/SQL use the links from relevant database based on this value LOV.

• Cartoons - mouse clicks does not not in dialog boxes

  Hello

  The contents of a dialog box that open in Animate is non-responsive to mouse clicks. For example if I opened the box of the Document settings and then I can not click on the options or change the size of the document, even if the buttons etc meet (highlighted) when my pointer passes over them, they do not meet the clicks.

  This a CC animate freshly installed, this problem occurred the first time I opened it. I uninstalled and reinstalled and handed over running my PC but the problem persists.

  Any help would be appreciated!

  Thank you!

  reset your preferences - http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html