Running reports within a form 10 g (as opposed to 6i)

Similar Questions

• Running reports of independent forms with run_report_object

  Hello

  I'm testing the new version of 12 c (12.2.1) forms and reports. I must say that I am very happy was how smooth the transition of 11g. One thing I'm out by the majority is stand-alone option (no browser). But I encountered a problem when you run the form report with the run_report_object Offline command. As I think that it is probably prohibited, because there is no "common interface" (SST in 11g) in stand-alone mode. On the other hand, there are a bunch of frmsal.jar used to run forms in stand-alone mode. So my question here. Run_report_object is supported in stand-alone mode or should I look for another solution like the report running through reports web service interface?

  THX.

  RUN_REPORT_OBJECT is supported, but you must be aware of the following:

  1. regardless of whether you are using a browser, you must set COMPONENT_CONFIG_PATH in default.env.  Details are provided in the Release Notes (section 2.3.8).

  http://docs.Oracle.com/middleware/1221/formsandreports/FRREL/forms.htm#FRREL5297

  2 once again, regardless of whether you use a browser or not, code former example of integration of forms/States requires that forms and reports were both accessible on the same port.  From v11, each of them now get their own ports.  So, in order to use relative paths to the URL, you need a common access point.  This is possible with SST (or OTD) before WLS.

  3. in the case of use of forms (FSAL) Launcher, remember that authentication may differ between Forms and reports.  In this case, available SSO is the traditional db for forms connection.  This should be considered when calling the reports.  It will prevent the race reports, but the user may need to to re-authenticate in reports if she uses a different configuration (for example, SSO).

• avoid to run reports in the dashboard

  Hi all
  
  Is there anyway to avoid running reports within a dashboard page, the first time I open it.
  
  Concerning

  Try to read this...

  http://obieeone.com/2009/08/24/how-to-stop-queries-to-automatically-fire-off-once-entering-dashboarddashboard-page/

• cannot run reports in the menu forms

  A few hours I was able to run reports... in the menu forms but now when I try again, I get this message... its happens with all reports... all reports are working well in the generator
  
  
  REP-110: cannot open the file 'JOTYPE.rdf '.
  REP-1070: error when opening or saving a document.
  REP-0110: cannot open the file 'JOTYPE.rdf '.

  It seems that you have changed your configuration file and now you are off course.

  Check it ' \orahome\reports\server\conf

  Open the file with the name of the report server and find

  Save and exit

  Restart your application server.

  If the paths are Okey, then make sure that this file exists in defind the path.

  Published by: user5826950 on June 14, 2010 01:07

• Running report form 10g 10g

  Hello
  
  I just had a request,
  I have 5 report I need to call from a singl; e shape based on certain conditions.
  I create 5 reports object in form calling the browser object and only use those report objects to call the report or is there a way to achieve this.
  
  If there is no other way round then do let me know.

  Hello!

  No, you haven't.
  Simply change the property report_filename during execution.

  Concerning

• What is the hierarchy for running reports?

  Hello world
  
  Can someone tell me what is the hierarchy for running reports as fact when the query data model is executed, when groups (Group of columns, the place holders etc. within a group of data model is executed), form setting etc is executed.
  
  Thank you
  Gerard

  If there are two absolutely independent querries, then I can just tell.
  If two querries are related, then, that the other is linked is executed first.
  But before any two querry run the beforereport, the beforeparameterform and after triggers parameterform.
  So, the best way to ensure that something is executed first is putting in the afterpform trigger.
  Do not count the trigger on afterreport.

• The forms11g running report

  Hello
  is it possible to dynamically get servlet url and name of report server report to run reports of forms 11 G?
  If so, how.
  Thank you.

  You could do something like this:

  v_servlet := ;
  v_repserver := ;
  

  "Some" might be all that you want, like a function that retrieves the values from a table in your database.

• Component report from a form with the input of the user parameters

  Hello
  
  I am new to Oracle reports. I have an application coded 6i. I currently use the application in Oracle Forms Builder 9i. There are also few reports which are called Forms. Given that the application has been developed in 6i, the report was called using Run_Product. Forms are a set of parameters of the user of the report using the parameter list pl_id. The syntax used is Run_Product ('D:\Report\sales.rdf', SYNCHRONOUS, DURATION, REPORTS, FILE system, pl_id, NULL);
  
  I learned that the Run_product does not work in 9i and we need to use run_report_object. I changed the code to use run_report_object and using web.show_document () I am able to run the report in the form. There are 2 parameters that should be passed to report forms. The parameters are from_date and to_date which will prompt the user to enter the performance of the form. In the report, the initial values of these parameters are defined. Thus, the report runs fine for the initial value always. But when I try to change to the form_date user input and to_date, the release of the report does not seem to take the new values, instead the old report with initial values (defined in the report) is running again.
  
  Can someone give me the code to pass the parameters defined by the user to the State of the forms? I defined a report object in the node forms such as REPTEST and defined a parameter list pl_id and form_date and to_date adds pl_id and uses the following encoding:
  
  vrepid: = FIND_REPORT_OBJECT ("REPTEST");
  vrep: = RUN_REPORT_OBJECT (vrepid, pl_id);
  
  But it does not work.
  In addition, the parameters defined in the forms and States should have the same name?

  Hello

  If you want to send the settings when you use RUN_REPORT_OBJECT, you simply line:

  SET_REPORT_OBJECT_PROPERTY (report_id, REPORT_OTHER,' FROM_DATE ='|: BLK_INPUT.) FROM_DATE | "= TO_DATE' | : BLK_INPUT. TO_DATE | »
  paramform = no ");"

  The hidden_action parameter is required to use PARAMFORM = YES and RUN_REPORT_OB JECT

  PARAMFORM Specifies whether to display the form of run setting when you run a report through CGI or a servlet. PARAMFORM is only used to supply parameters to the layout of paper reports, Web reports no JSP-based.

  http://www.Oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwrefex/Cmdline/common/bld_paramform.htm

  Regardss

• API for running reports

  Thus, there is a huge scope and I don't think it's possible, but I hope I'm wrong.
  
  Is it possible to run specific reports through the api (VB programs)?
  
  I worked on a bit of a side project creating an android application that works as an interface for a program vb running on the server. Currently, I built in most of the features that comes from the api HFM so I can do things like run of consolidations, periods of opening/closing and copying data from prod to dev.
  
  However, the only piece that would be really nice to add is the ability to run reports. I can't find any api that references the report engine well. I guess that's because reports are based entirely on the web?
  
  On 11.1.1.3 right now, I'm going to 11.1.2 in the near future. Any input would be appreciated.

  Although he may not get you exactly what you want, each report has a "smartcut. Basically, you can call a URL and pass a parameter that references the name of the report and workspace will pass back the report. There are obviously considerations for which cannot do it is suitable that you would need to have a session established, etc. The session should be relatively easy to get around. The next challenge is perhaps presentation if you do not want the report appears inside the workspace typical U / I. A possible solution would be to ask the HTML version of the report and strip on the HTML around the report so you are just left with him. I'm sure you can understand this possibility, but it would take a little effort to do.

  To find the smartcut for a report, go to the workspace, right-click on the name of the report, select properties and on the main tab, you will see a reference to it. If I remember correctly, this is the path and report name encoded URL passed to something like HRViewer.jsp.

  Hope that helps.

• "Report Designer" and "Run report" links are disabled in VSM 9 RP8?

  Hello

  In my installation of VSM 9 RP8, "Report Designer" and "Run report" links are disabled.

  Is this a problem of license (in Admin-> System Administration - > Sytem-> Your Organization, license type reflects as demo)? Or I need to activate certain settings activate the links "Report Designer" and "run a report?

  Any ideas?

  Concerning

  Ankit

  Please check the settings

  Admin-> System Administration->-> reports security roles.

  and the security settings for your user name (roles of Security - Reporting).

• How to make a form with report and a form of inclusion in the same page?

  Hey, guys:
  
  I was wondering if you could have any link or examples to show how to make a form with report and a form of inclusion in the same page, these two forms are related to the same table. Our customer wants that a user can add a new row to the table in a form and see all lines created by this user in a report, the report should provide link change as well. the problem is: whenever I inserted a new line or change a line or delete a line, and submitted and return to this page, all hidden elements lost their values, this report is empty, and some display only items also lost their values. Could someone give me any suggestions?
  
  Thank you very much!
  
  Sam

  So, the problem is essentially with page elements lose their session state values when re-loading of the page. How do you define values for the elements of the hidden page? You have default values defined for those? They are based on the database column? What is the "Source" parameter for these items on the page? It is set to "Always, replace any value in session state"? You have any process of 'Empty the Cache', which is reset these values to null element?

  What is your version of the Apex?

  I would recommend that you have installed for example in apex.oracle.com. This would help to better understand the issue.

  Published by: jaouad khalifi on 13 December 2012 22:11

• How to set schema running information in Oracle forms

  Hello
  
  Please tell me, how to set schema running information in Oracle forms.
  
  Thank you and best regards,
  Sanjeev.

  What exactly do you want? Your question is not very clear.

  Craig...

• Get the name of the report file in oracle running Report Builder

  Dear all,
  
  Is it possible to get the name of the report file in oracle running Report Builder?
  
  for example, "HR_REP012. REP.
  
  I need to this very important...
  
  Kind regards
  Yousef
  
  Published by: Yousef_m on June 2, 2012 05:18

  Hello

  Have you tried the builtin SRW. Built-in GET_REPORT_NAME?

  Example of

  function boolean return AfterPForm is
  my_variable varchar2 (80);
  BEGIN
  SRW. GET_REPORT_NAME ($my_var);
  SRW. MESSAGE (0,' report Filename = ' | my_variable);
  RETURN (TRUE);
  END;

  Concerning

• Need to make the process to run only every time form is opened.

  I need my SQL queries to run each time the form is opened.  This is if the form is opened to the original user, an approver in the workspace, or when someone opens a (possibly rejected) form via an attachment in an e-mail message.  It seems that "Render" processes only seem to run when the form is opened by the end-user.  Can anyone help explain how to get the form to execute the process of rendering (and other methods) whenever the form is opened, no matter how, it is open?

  Thanks in advance.

  Doggie Joseph.

  For those who arrive here from a Google search, I think that to do a WSDL for the process.  It's a complicated subject, however.

  Someone at - it any other ideas?

• can I take a form and put a pic within the form and the picture becomes the form?

  can I take a form and put a pic within the form and the picture becomes the form?

  Yes mel, you can do it. This video tutorial will allow you to do exactly that: