Similar Questions

• How can I remove Department of public safety Canada Virus on iPhone

  Ministry of Public Safety Canada Virus removal on iPhone 6, how to do?

  Hello! It is not a virus, don't be afraid.

  Restart your phone.

  Go to settings - Safari - clear the history and data from the Web site.

  If that doesn't work, reset your device. This will not erase your data stored on the phone.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

• RV042G Port forwarding of the public port of IP internal with another port_number

  Is it possible to create a service that will forward the 9010 public port to an internal IP address with port 23?

  First of all, I don't like to open public Telnet port on the inside so I would use a different public port and secondly my ISP does not allow for some public ports under the port 80

  Thanks for your help

  Order the transfer of UPnP under the configuration table > UPnP tab on the left. Note that UPnP doesn't have to be enabled for the redirection of the function rule.

• OAM 11gR2PS2 - no authenticated access to public Documents at the Complutense University of MADRID

  Hi all

  We had a requirement to one of our clients, in which the documents who have received the public's access to the Complutense University of MADRID should not be challenged for authentication.

  Examples of URLS that are not in dispute when you use the managed for UCM server port (16200)

  http://xxx.com:16200/cs/idcplg? IdcService = GET_FILE & dID = 1445 & dDocName = DEV_COMPLOGO_31364 & allowInterrupt = 1

  http:// xxx.com : 16200/cs/groups/public/documents/digitalmedia/b2dv/xzmx/~edisp/dev_complogo_31364.jpg

  This GS search page ready must also open without authentication.

  http:// xxx.com : 16200/cs/idcplg? IdcService = GET_DOC_PAGE

  After the configuration of SSO and protection/CS, when I go above URL using the port of OSH only the second opens without challenge me the name of user and password.

  Knowing that I can protect/unprotect URL patterns, I was wondering if this is possible using OAM at all.

  The document is assigned to a group of public safety at the Complutense University of MADRID.

  http://xxx.com:16200/cs/idcplg? IdcService = GET_FILE & dID = 1445 & dDocName = DEV_COMPLOGO_31364 & allowInterrupt = 1

  By looking at the URL, would you be able to identity if this url is to document to the Group of public safety? All of the query parameter would help you to differentiate the document in the public safety group

  If the answer is NO then you will not be able to create policies OAM who could remove the URL

  If the answer is YES you can then use 'Query parameter' section resource OAM to remove the specific URL

  hope this helps

  Concerning

  Aakash

• Safety behind the forms of the AAU

  I have created a form of CS at the University Complutense of MADRID and displays the contents of a user as the form is the Group of public safety. I have provided a write access to the guest account to allow a user external to check the form.
  
  Here's my problem. When the form is displayed to users, it is considered "Public" content. When the user submits the form, it is considered "private". I tried to prepopulate the security within the shape group by passing a value to a security group, but as the guest user has access to the public, it did not work.
  
  Does anyone have any ideas on how I can accomplish this?
  
  Thanks in advance for your help,
  
  Data_Bitz

  Have you tried the blackhole checkin thing?

  http://blogs.Oracle.com/Kyle/2009/08/ucm_black_hole_check_in.html

• Why an Add - keep it swinging back on Ask to activate when I set it to always turn on?

  So my question of the unit is not resolved, but for some reason, whenever I put it to "Always enable", every time I leave the tab it switches back on 'ask to activate '.

  There is a problem of non-public safety with the Unity Web Player, so temporarily may not be programmed to always enable to avoid untrusted sites using this. I hope that this will be resolved in the next version. However, in the meantime, you can give a site permission using the Plugin notification icon.

  If this is not familiar: when you visit a site that wants to use the unit, you should see a notification icon in the address bar and usually (but not always) one of the following values: a link in a black rectangle in the page or an information bar slides between the toolbar and in the page area.

  The plugin notification in the address bar icon in general looks like a small, dark gray Lego block; It can be red for high-risk plugins.

  If you see a good reason to use the unit, and the site looks trustworthy, you can go ahead and click on the notification icon in the address bar and he approve it. Firefox should then load the player into the page.

• List of emergency - Catcher - Custom contacts Please Help

  Hi all

  I work with public safety and want to push back the application of the list of the emergency calls to BlackBerry smartphones in order to communicate in an emergency. Currently I do a push channel browser for devices. However, it is just a temporary solution, because the information is saved on memory cache of BlackBerry and disappears after a period of 12 to 24 hours. The plan is to install the Custom of collecting on the devices so that it can capture contact information and save it permanently on the device.

  So far, I downloaded the Emergency Contact List Sample Application. Also, I installed the ECLContactList.alx app for the old version 'Tree list UI' on my BlackBerry (using the Desktop Manager), and it worked very well. However, I really want to install the new version of view 3 inch screen, but when I try to install on the BlackBerry I get a message "this application is not compatible with your device and can not be added" .

  Anyone know what the problem might be or what I am doing wrong?

  Additional information:

  I have no experience in programming (some exposure only)

  Version blackBerry 8830 4.5.0.138

  Desktop Manager 5.0

  Exchange 2003 SP2

  SQL Server 2005

  BES 5.0 (in the case where you need)

  THANKS in advance for your help...

  You could give a glance to the section API Doc and category, if it is mentioned as signed, you must sign the application to run on the real device.

• Positioning of advice please CSS

  Create this width candidate site fixed for my class and struggling to match my layout.

  header - div can have a button? steady state does not...  Best way to make these 2 buttons?    < div id = "header_btn-box" >

  nav - buttons are not centered vertically shifted upward in the header

  Home - why is the type of list in red container do not align to the left, high?   < div id = "main_topics" >

  footer - graphic here at the foot of bottom-align, overlap main content div. Figure tried absolute positioning w / neg values... I know it could be part of the chart main index page, but the inside pages are background different main content .

  Advice appreciated

  Remove the height of your container of nav (height adjustment is not a good shot, as I have before siad)

  {#nav_main}

  margin: 0 auto;

  padding: 0;

  background-color: #4 d 4844;

  height: 34px;

  Width: 100%;

  box-shadow: 0px 5px in 6px #2c2a28 Medallion;

  }

  Then change your li to as below:

  NAV ul li {}

  display: inline-block;

  Padding: 1em 0;

  }

  Remove all the

  <>Tags inside your

Tags as shown below:

• Economy and employment
• Taxes and financial reform
• Health care
• Education
• Public safety and Social Justice
• Energy and environment
• Immigration
• READ MORE>

Then add the below css:

#main_topics ul {}

margin: 0;

padding: 0 0 0 20px;

}

#main_topics li {}

margin: 0;

padding: 0;

color: #4 d 4844;

make-weight: bold;

line-height: 230%;

list-style: square;

}

Others are difficult to say - you need to remove the ENTIRE height of the containers - don't know how many times I need to tell you that

• How can I prevent Windows 7 virtual machines to go to "sleep"?

  I am new to VMWare all this so please forgive my ignorance. Deploying a number of virtual desktops using VMWare View via Dell FX - 100 Zero Clients.  After a few calls for VMWare support all get up and running, most of the time I am extremely satisfied.  However, after 10 minutes of inactivity, the VMs go to "sleep", I have configured Windows mode 'High Performance' and 'Never' all set, I changed the OSD on the FX100 "0 (off), nothing seems to work.  It of something I'll just have to deal with, or is there something that I am missing.  This is important because once we go to full production, these machines will be used in a call 911 public safety Center and must stay up permanently.  Any suggestions would be greatly appreciated.

  I think the script indicates that the machine will go to sleep delete the line. But the damage is done...

  Here is the solution

  Reg ADD "hku\temp\Software\Policies\Microsoft\Windows\Control Panel\Desktop" /v ScreenSaverIsSecure d '0' f - change the value to 0 to prevent the screen lock screen saver

  Also make a check after you run the bat file.

  Hope this will help...

• Associate data to create a view.

  I am currently using a database of Oracle 10.2.0.4.0. I work for the Department of public safety and I am trying to create an Oracle Forms Application that will be used to track information of the mandate. I need to create a view that I can use in my form that will allow me to the warrants list who are associated with each other. In the forms I create these associations in a table by using primary keys for these records.
  
  I created a few fictitious tables with data that you can use to help me create the SQL I can use in the creation of the view, that I need, I hope.
  

  CREATE TABLE order_info
  (wp_id             number(12)   primary key,
   info              varchar2(10),
   order_no          number(12)   not null,
   order_name        varchar2(30) not null);
   
  insert into order_info (wp_id, info, order_no, order_name)
  values (1, 'AXE', 123456, 'DOE, JOHN P');
   
  insert into order_info (wp_id, info, order_no, order_name)
  values (2, null, 245645, 'DOE, JOHN P');
   
  insert into order_info (wp_id, info, order_no, order_name)
  values (3, 'SHOVEL', 354654, 'DOE, JOHN P');
   
  insert into order_info (wp_id, info, order_no, order_name)
  values (4, 'PAIL', 432110, 'DOE, JONATHAN');
   
  insert into order_info (wp_id, info, order_no, order_name)
  values (5, null, 514654, 'DOE, JOHN');
   
  insert into order_info (wp_id, info, order_no, order_name)
  values (6, null, 687980, 'DOE, JONATHAN');
  
  commit;
   
  CREATE TABLE associate_order
  (wp_id             number(12)   not null,
   associated_wp_id  number(12)   not null,
   constraint assoc_wp_ip_fk
     foreign key (associated_wp_id)
     references order_info(wp_id));
   
  insert into associate_order (wp_id, associated_wp_id)
  values (2, 1);
  
  insert into associate_order (wp_id, associated_wp_id)
  values (3, 1);
  
  insert into associate_order (wp_id, associated_wp_id)
  values (5, 3);
  
  insert into associate_order (wp_id, associated_wp_id)
  values (6, 4);
  
  commit;
   

  Once the tables are created, the table ORDER_INFO contains detailed information (in real life, it comes to the information related to a mandate). The ASSOCIATE_ORDER table contains the relationships between the records in the ORDER_INFO table. The ASSOCIATE_ORDER table is the one I want to use to create a view that I use in my Application Forms to list all of the warrants that are associated with each other.
  
  If you look at the data in the ASSOCIATE_ORDER table:

  WP_ID ASSOCIATED_WP_ID
  ----- ----------------
      2                1
      3                1
      5                3
      6                4

  WP_ID 2 is associated with WP_ID 1
  WP_ID 3 is associated with WP_ID 1
  WP_ID 5 is associated with WP_ID 3
  6 WP_ID is associated with 4 WP_ID
  
  I want to be able to do in the view that I have create is something like:

  SELECT associated_wp_id
    FROM ORDER_VIEW
   WHERE WP_ID = 3;

  And he have all the primary keys for the warrants (orders in this case) come back to me:

  ASSOCIATED_WP_ID
  ----------------
                 1
                 2
                 3
                 5

  The WP_ID of 1 is not included in the ASSOCIATE_ORDER table, because it is not associated with a previous mandate (order in this case), but because it is associated with WP_ID 2 and 3 I think.
  
  Here are all the commands associated together based on the data that is in the table. There may be 0 to many of these records in the ASSOCIATE_ORDER table, but if they reference a primary key (WP_ID) so I want to include in the view.
  
  I really hope that makes sense. I tried to play a little with analytics, but I'm not even close to the selection of any of the data that I want, so I can't yet show you what I've tried because it probably doesn't even have sense.
  
  Thanks in advance - mike
  
  In order to clean your database if you filled with the scripts above, you can do the following:

  drop table associate_order;
  drop table order_info;

  Hello

  I know right what you want the view to look like.
  Given the example of data you posted, that's what you want to the content of the view?

  WP_ID INFO         ORDER_NO ORDER_NAME       WP_ID_GRP
  ----- ---------- ---------- --------------- ----------
      1 AXE            123456 DOE, JOHN P              1
      2                245645 DOE, JOHN P              1
      3 SHOVEL         354654 DOE, JOHN P              1
      4 PAIL           432110 DOE, JONATHAN            4
      5                514654 DOE, JOHN                1
      6                687980 DOE, JONATHAN            4
  

  ? You will notice that it is just order_info, with an additional column, wp_id_grp, added. Wp_id_grp is the lowest related wp_id. For example, wp_ids 1, 2, 3, and 5 are all related, so they all have wp_id_grp = 1.

  Here's a way to do it:

  CREATE OR REPLACE VIEW order_info_grp
  AS
  WITH     got_pairs     AS
  (
       SELECT     wp_id               AS x_id
       ,     associated_wp_id     AS y_id
       FROM     associate_order
      UNION
       SELECT     associated_wp_id     AS x_id
       ,     wp_id               AS y_id
       FROM     associate_order
  )
  ,     got_relatives     AS
  (
       SELECT     CONNECT_BY_ROOT x_id     AS wp_id
       ,     y_id
       FROM     got_pairs
       CONNECT BY NOCYCLE     y_id     = PRIOR x_id
  )
  ,     got_wp_id_grp     AS
  (
       SELECT       wp_id
       ,       MIN (y_id)     AS wp_id_grp
       FROM       got_relatives
       GROUP BY  wp_id
  )
  SELECT       o.*
  ,       g.wp_id_grp
  FROM       order_info     o
  JOIN       got_wp_id_grp g  ON  o.wp_id  = g.wp_id
  ;
  

  If you want a view which only has the columns wp_id and wp_id_grp, then everything just omit the main request; got_wp_id_grp, it's just what you want.

  I guess that the associate_order relationship is reflexive. In other words, instead of:

  insert into associate_order (wp_id, associated_wp_id)
  values (2, 1);
  

  you have it, could just as well, says:

  insert into associate_order (wp_id, associated_wp_id)
  values (1, 2);
  

  In other words, all that matters is that 1 and 2 are linked. What number goes in which column is not relevant.

  In table assoiciate_order, why is there a foreign key on associated_wp_id constraint, but not on wp_id?

  CONNECT BY is never terribly effective, and NOCYCLE does only make it worse. Depending on your data, in particular how different wp_ids can be in a related group, this may not be practical. You might consider adding a column wp_id_grp in the associate_order table, rather than owning a view and containing a PL/SQL (which would be faster) procedure re - fill this column when associate_order is changed.

  Published by: Frank Kulash on April 17, 2013 18:33

  MLBrown wrote:
  I think I left mouth stumped the Panel...

  Be patient! It's true that the median time for a first response on this forum is less than 10 minutes, but it's because the first response often only pointed out that we need more information. When you provide all the sample data, and a good explanation of the problem, as you did, then people can begin to solve the problem instead of complaining, complaining is so much faster than problems.

• Giving error download

  I created a test using Jdeveloper application, wenbenter. I need to download files to the Complutense University of MADRID
  
  Using Document Manager, I connect to a particular folder in the Complutense University of MADRID. I can see what files it is in and I can download files of the UCM Admin screen too in this case. but when I try to download using my screen, download the document Manager feature, it gives me below error
  
  I use the same user name to connect to the AAU and my request also, I created folder with all the same the user/owner with group public security but still error.
  I also created the folder with an anonymous user with access to public safety, but still the same error occur
  
  Help, please
  
  * < AbstractAction > < handleAlert (DoclibException of) > cannot perform the operation. The document or folder may have been deleted or you do not have permission.*
  oracle.webcenter.doclib.internal.view.DoclibIdcException: Oracle Content Server error: content element '000834' has not been verified successfully. Weblayout directory is on a semantic filesystem with 8point3.  Content ID six characters is prohibited to avoid the loss of the file.     at oracle.webcenter.doclib.internal.view.CISRepositoryLogic.createDocument(CISRepositoryLogic.java:1154)
  at oracle.webcenter.doclib.internal.view.action.UploadAction.performUploadAction(UploadAction.java:643)
  at oracle.webcenter.doclib.internal.view.action.UploadAction.performAction(UploadAction.java:568)
  at oracle.webcenter.doclib.internal.view.action.AbstractAction.execute(AbstractAction.java:80)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at com.sun.el.parser.AstValue.invoke (unknown Source)
  at com.sun.el.MethodExpressionImpl.invoke (unknown Source)
  at org.apache.myfaces.trinidad.component.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:46)
  at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:102)
  at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190)
  to oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$ 1.run(ContextSwitchingComponent.java:92)
  at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
  at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
  at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:102)
  to oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$ 1.run(ContextSwitchingComponent.java:92)
  at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
  at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
  at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:96)
  at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:148)
  at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:148)
  to oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$ 1.run(ContextSwitchingComponent.java:92)
  at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
  at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
  at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:102)
  to oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$ 1.run(ContextSwitchingComponent.java:92)
  at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
  at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
  at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:96)
  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:879)
  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:312)
  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:185)
  at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at oracle.portlet.client.adapter.adf.ADFPortletFilter.doFilter(ADFPortletFilter.java:32)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at oracle.webcenter.framework.events.dispatcher.EventDispatcherFilter.doFilter(EventDispatcherFilter.java:44)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
  to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:446)
  at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
  to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:446)
  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
  at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at oracle.wcps.client.PersonalizationFilter.doFilter(PersonalizationFilter.java:75)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at oracle.webcenter.content.integration.servlets.ContentServletFilter.doFilter(ContentServletFilter.java:168)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at oracle.webcenter.lifecycle.filter.LifecycleLockFilter.doFilter(LifecycleLockFilter.java:151)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:175)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:111)
  at java.security.AccessController.doPrivileged (Native Method)
  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3715)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3681)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
  Caused by: oracle.stellent.ridc.protocol.ServiceException: content element '000834' has not been verified successfully. Weblayout directory is on a semantic filesystem with 8point3. Content ID six characters is prohibited to prevent the loss of files.
  at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:135)
  at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:107)
  at oracle.webcenter.doclib.internal.view.CISRepositoryLogic.checkinUniversal(CISRepositoryLogic.java:1308)
  at oracle.webcenter.doclib.internal.view.CISRepositoryLogic.createDocument(CISRepositoryLogic.java:1090)
  ... more than 82

  My advice would be false, as I have no experience with WebCenter, but I'll give it my best shot.
  Connect to Oracle UCM, which serves as a repository of content WebCenter (probably like http://: 16200/cs/with weblogic of user and administrative password) and on-> it to browse through the content-> the Contribution files-> (name of the folder, the same use in your WebCenter application)-> Actions-> information file---> folder Actions-> update, select left pane enter the default values for the Type and the group security and possibly other metadata fields you want here assigned values-> submit an update.
  After this procedure, this folder has assigned default values of metadata and content can be just drag & drop this file to be stored on the content server.

  Kind regards
  Boris

• ACL does not work in ECM11G

  Hi all
  
  I did a demo of the ACL on ECM11G according to
  http://blogs.Oracle.com/Kyle/2011/02/new_security_configuration_flag_ucm_ps3.html
  
  my config.cfg is:
  
  UseEntitySecurity = true
  SpecialAuthGroups = Marketing, Public
  
  When I use weblogic to check in a doc with Marketing security group, assign User1 to right (r), then the connection of the User1, user1 found can always update the doc, what could be wrong?
  
  Best regards

  Hello

  I think that the problem is "group1 is also defined as the role of man and has right RWDA for group of Public safety".

  I remember to have seen this. As the group "1" RWD "A"on the Public, the Admin level privilege allows any member group' 1 complete control, regardless of the ACL.
  Try limiting the privileges "group1" powered back on 'Public' and check the results.

  My recommendation would be to say two groups "PUBLIC_ADMIN" and "gorup1", where "PUBLIC_ADMIN" should have RWDA on Public and "group1" should be RWD.
  Now you can add all users in the Organization of "group1". When they will be added in the ACLs (on a folder/content), they'll be atmost get RWD.

  However, given that the number of ADMINs is limited, if someone doesn't need it comes later, you can add them to the group 'PUBLIC_ADMIN' too.

  A caveat, however, is that PUBLIC_ADMIN will have full privilege on any folder/content in Public. To compare for example with the function of 10g projects, all members with RWDA on the 'Projects' security group and RWDA "prj" account access on all projects.
  Another I've seen so far is that anyone with RW will be not only able to write but also update ACL! Always check.

  I hope this helps.

  Kind regards
  Prateek

  Published by: Prateek Mohan on April 27, 2011 10:34

• The carousel for iPad download

  Why the company that distributes the software NEED to know your location to download photos or run the program? In my line of work, operational safety is paramount. They don't need to know where I am or where I take my photos. As easily as programs are pirated, anyone can access and know when I'm home or not. And if it's "political", that he needs to change to public safety.

  What you see is the standard "location services" application for leave to iOS and you will see in other applications of photos, too.  The text is provided by Apple, and it is intended to inform the user if your photos contain location data, the app that you grant access to will be able to see the location data in the photos you import.  It is quite normal for any application that imports photos. Unfortunately, the text of the alert is misleading, because it suggests that the application actually wants to follow your position.  Rest assured that Carousel does not track your location, or carousel has interest in knowing your location!  So that the carousel for you allow to import photos, it must have the permission to read from your photo library.

  -Sumner Paine, product manager

• SS_GET_SEARCH_RESULTS return no values when DefaultAccounts = webstuff

  I use gR 10, 3 of the Complutense University of MADRID with Site Studio 10 gR 4. All pages and content have the webstuff or webstuffName account and that the Group of public safety. I used the applet of the user to change the roles under groups, so that the Public has Guest (R) for the role.
  DefaultAccounts = webstuff (R) is set in the config.cfg only.
  
  I get results in only two ways:
  1. in the config.cfg - DefaultAccounts = #all
  2 - connection can search
  
  What I want is to see the results when you are not logged in and when DefaultAccounts = webstuff - basically when the anonymous user visits the website, I want them to see the search results using code FRO SS_GET_SEARCH_RESULTS. I use a similar code located in the technical reference manual.
  
  I don't know what the problem is.
  
  Thank you, Ken

  1. have you recently upgrade from 7.5 to 10 gR 3? If so, you must add this indicator according to the Support of Oracle Doc ID 1214273.1 : DefaultNetworkAccounts = #none (R)
  2. what kind of research do you use? Verity? OracleTextSearch?

• F4V file begins to play sometimes

  Hello everyone!

  I have one coded (2pass VBR) FLV file.

  Trying to play through:

  http://www.OSMF.org/Configurator/FMP/

  And got an error: "unable to connect".

  I was trying to play via SMP unzipped on my PC, the same result.

  File which only can be found here:

  http://teplostensochi.ru/stuff2play/24hours.F4V

  Sometimes it works sometimes not: Configurator does'nt changed settings.

  That comes from MediaInfo on 24hours.f4v:

  General

  Full name: C:\Vids\24hours.f4v

  Format: MPEG-4

  Format profile: Base Media / Version 2

  Codec ID: mp42

  File size: 16.9 MiB

  Duration: 2 min 57 sec

  Overall bit rate: 798 Kbps

  Encoding date: UTC 2011-10-06 09:34:40

  Marking date: UTC 2011-10-06 09:34:40

  Video

  ID: 1

  Format: AVC

  Format/Info: Advanced Video Codec

  Format profile: [email protected]

  Parameters of the format, CABAC: Yes

  Parameters of the format, Reframes: 2 images

  Codec ID: avc1

  Identifier of the codec/Info: Advanced Video Coding

  Duration: 2 min 57 sec

  Bit rate mode: Variable

  Bitrate: 699 Kbps

  Maximum bitrate: 8 000 Kbps

  Width: 512 pixels

  Height: 384 pixels

  Display aspect ratio: 4:3

  Frame rate mode: Constant

  Frame rate: 29.970 fps

  Color space: YUV

  The chroma subsampling: 4:2:0

  Color depth: 8 bit

  Scan type: Progressive

  /(pixel*Frame) bits: 0,119

  Stream size: 14.8 Mio (88%)

  Language: English

  Encoding date: UTC 2011-10-06 09:34:40

  Marking date: UTC 2011-10-06 09:34:40

  Audio

  ID: 2

  Format: AAC

  Format/Info: Advanced Audio Codec

  Format profile: HE - AAC / LC

  Codec ID: 40

  Duration: 2 min 57 sec

  Bit rate mode: Variable

  Bit rate: 96.0 Kbps

  Maximum bit rate: 182 Kbps

  Channels: 2 channels

  Position of the channels: Front: L R

  Sampling frequency: 44.1 KHz/22,05 KHz

  Compression mode: lossy

  Stream size: 2.01 million (12%)

  Language: English

  Encoding date: UTC 2011-10-06 09:34:40

  Marking date: UTC 2011-10-06 09:34:40

  mdhd_Duration: 177215

  ---------------------------

  What could be the reason for non-gamers?

  Public safety,

  I would check out configuring nginx for the host that is used to answer that OSMF is not supported.

  I tried to use the file on an apache server and it works perfectly.

  Response code: 200

  The response size: 6.5 KB (which means that only a part of the file has been transferred)

  Does that help?