Similar Questions

• CAPTIVATE CC wouldn't being not listed for download in creative cloud - please help

  I signed and I have more creative cloud; However, after the purchase of my annual subscription of Captivate, he failed to appear in the cloud creative app to download. I tried the following:

  • Stop creativity demand of cloud and restarted the application
  • Restarted my PC

  All creative cloud applications are downloaded and updated as it should be, less Captivate. I checked on my account that the subscription is active for the next year.

  A bit of information on my system:

  • Windows 7 Enterprise Service Pack 1
  • Intel Core i5-4300U CPU
  • 8 GB RAM

  I tried to find a number of reminder and whenever the online troubleshooting send me in a circle and did not provide a customer support number to call.

  JeremeyPlace, Captivate is not in the creative clouds. Here is the link to download 8 Captivate: https://www.adobe.com/cfusion/tdrc/index.cfm?product=captivate.

  Let us know if you need help with this.

  Move the debate to Adobe Captivate

• Hey, I don't see my friends on Apple Watch contact? help please.

  Hey, I don't see my friends on Apple Watch contact? help please.

  on the digital touch and should add the address of my friend

  HI - try the following steps.

  After the Association Apple Watch with an iPhone, you may have to wait an hour or more before you can receive a digital key.

  Otherwise, this checklist is intended to address potential problems, which can also help to solve or to avoid other problems.

  • In the Contacts application on your iPhone:
    • Make sure the contact of each friend card contains their iPhone phone number and email address Apple ID.
    • Check that your contact card contains your Apple ID email address and your iPhone number.
  • On your iPhone, go to: settings > Mail, Contacts, calendar > in the Contacts section, check my Info using your contact card.
  • On your iPhone, go to: settings > general > Siri > My Info - make sure your contact card is selected.
  • Check that you have added each of your friends to the friends list on your Apple Watch:
    • On your iPhone, in the application of the Watch: Watch My > friends.
    • To add more friends: friends list > add friend > tap someone in the contacts list.
    • If someone is not in the list, open the Contacts on your iPhone, add them here, and then try again.
  • Remove the old iMessage conversations with each of your friends on your iPhone and Apple Watch:
    • iPhone: app Messages > swipe to the left on a message thread > delete.
    • View: Open the Messages app (from the home screen, which is accessible by pressing the digital Crown) > swipe to the left on a message thread > tap on Trash / delete.
  • Set new conversations of Messages from your iPhone phone number:
    • iPhone: settings > Messages > Send and receive > scroll to start new Conversations of > choose your iPhone phone number.
  • Check the email addresses to which you can be reached via iMessage:
    • iPhone: settings > Messages > Send and receive > under you are reachable by iMessage to > allow email address Apple ID (with a scale) (do not enable others who are not only yours).
  • On your iPhone in the app Watch: Watch My > general > reset > press reset sync data:
    • You won't see anything happen after pressing it (the process runs in the background, invisible to the user).
    • Wait a minute or so (to allow contacts to be erased and replaced on your watch).
  • Disable and re-enable iMessage on your iPhone:
    • iPhone > settings > iMessage > enable/disable / enable again.
  • Restart your iPhone and your watch (turn the two together off the coast, then restart your iPhone first):
    • To turn off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off. To restart: press and hold the side button until you see the logo.

  Also ask your friends to follow equivalent process.

  More information:

  Use the touch-Apple Support

• I want to cancel my subscription (please help!) My customer number is 367913360

  I want to cancel my membership. Tit as soon as possible. Please help me!

  My customer number is 367913360

  Hello

  Please contact us at 01795674844 or you can refer to contact customer service

  See if that helps.

  Thank you

  Varun

• Nightmare of Customer Service - the billing department - someone please help?

  I've been a customer of creative cloud for years. I recently acquired a new credit card and cancelled the card that was used for my automatic monthly payments to Adobe. I logged into my Adobe account and updated my payment information. When my date of payment, the payment does not pass. I said, 'maybe I made a mistake and typed a wrong number", so I logged in to my Adobe account and updated the information of payment again. This did not help. My horrible experience with customer service began this day - April 20, 2015. The nightmare continued for more than a month and I spent COUNTLESS hours on the phone and chat with customer support. I contacted my Bank, USAA, double - twice they told them me the only reason why to come through Adobe charges denied is that the address that adobe has for me the file (my old address) does not match the address associated with my new credit card (my new address). I have to update address with my new payment information, but apparently do not have access to update the address what adobe has for my account.

  I was told that my address has been updated countless times, but the automatic payments continue to be denied to my Bank and my Bank reports the same problem - the address sent by Adobe at the request of the accusation is incorrect and does not correspond to my current address.

  When Adobe Support sends the generated mails automatically titled "Adobe case Update" and providing a link to a "Customer Support Portal", my OLD ADDRESS is obviously at the top with my name. My OLD ADDRESS, even though I was assured and reassured many times my address has been updated in the system. The only thing I can think is that address only is not updated on all platforms, especially in the Department of billing and payments.

  I'm just trying to pay my monthly bill of the Adobe Creative Cloud. How can something as simple as to update my address on my account have taken more than 8 hours of my time over the last 5 weeks?

  Someone please help!

  
  

  Thank you, Maggie
  

  Hi Maggie-

  I sent you a private message. Please check up on this post, if you read email (link: Customer Service nightmare - Department billing - someone please help?), by clicking on the icon of your photo at the top of the screen and check your Inbox.

  Kind regards

  Guinot

• I have iphone5s and my contact id does not work, all the time he show faild Setup touch id please help?

  I have iphone5s and my contact id does not work, all the time he show faild Setup touch id please help?

  Hi yjain51,

  I understand you had some problems recently with getting Touch ID to work reliably on your iPhone 5s. I know that it is a feature of great security for your iPhone, so I'm happy to help you.

  When you use Touch ID, make sure that your hands are free of any dirt or moisture so that fingerprints can be read clearly. This article explains further:

  Use the ID Touch on iPhone and iPad - Apple Support

  Thank you for using communities Support from Apple. See you soon!

• I can NOT connect my Facebook account to make Yahtzee can access my contacts. He said that Facebook is not configured on this phone. ??? I have also a certificate has expired and do NOT know how to get a certificate of update. ?  Please Help, I have NOT b

  I can NOT connect my Facebook account to make Yahtzee can access my contacts. He said that Facebook is not configured on this phone. ??? What this mean and how can I solve this problem? I have also a certificate has expired and do NOT know how to get a certificate of update. ?  Please Help, I have NOT been able to get help from any of these Issuea. Very frustrated. Please contact me by txt on my iPhone 352-257-9403 if possible. Thank you for your support

  iOS 9.2.1

  certificate is daily horoscope

  wwhat the devil is and why it has expired?

• I don't have the basic games that windows comes with and also miss me the contacts and calendar. Please help someone. I had windows 7 through my school, which is outside the MSDN program.

  I don't have the basic games that windows comes with and also miss me the contacts and calendar.  Please help someone.  I had windows 7 through my school, which is outside the MSDN program.

  Programs like Contacts and calendar are available in Windows Live Mail through Windows Live Essentials (http://download.live.com)

  In regards to the games, I assume that you are running Windows 7 Professional.

  Click Start, type: features on or off Windows activate
  Develop games
  Select the games you want. Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• DELL INSPIRON N4010 WEBCAM QUESTIONS: PLEASE HELP... DELL CUSTOMER... AND ANYONE WHO HAS KNOWLEDGE REGARDING MY PROBLEMS...

  I have a Dell Inspiron N4010. Configuration: 1st generation i5 processor with windows 7 home basic 64-bit.

  3 months after the purchase of my laptop, I have updated my Dell webcam central through the applications update service... Shortly after the update, my integrated webcam has started to show problems.

  DESCRIPTION OF THE PROBLEM:

  Shortly after the update of my installed factory Dell webcam central, my integrated webcam has begun to show the problem. webcam was able to start with any application such as Skype or dell central webcam himself. Instead, webcam LED flashes for flicker of a second, and then goes away without any streaming video.  Trying to open it, an error message is displayed: "your webcam can be used by another application. Close the application to launch streaming video".» Initially, the problem was temporary, that is occasionally the webcam began video streaming without any problem, but as the time passed, webcam stopped working almost completely.

  TRIED SOLUTIONS:

  I tried all the solutions mentioned below:

  • I uninstalled the Dell webcam software and reinstalled with the version installed in the factory, supplied on CD with laptop. Uninstalled the webcam via the Device Manager and reinstalled, but without success.
  • I heard that there is a conflict between the Dell face recognition software and dell webcam central. So, I uninstalled the dell face recognition software. After that, the webcam worked for a few days, and there still rebooted problem.
  • I went through various forums online, dell community, customer service, etc. and everything suggested tried but without success. I heard several times that this is not a hardware fault but driver error. Even in a few forums, its says that Creative Technology Limited have not been able to supply webcam drivers compatible with windows 7 64-bit.
  • I even did factory restore my laptop twice, but could not do my webcam works.
  • Then, I decided to format my system and installed windows7 again with the disc that came with my laptop. During this process, I have kept the recovery drive and the untouched OEM disk untouched. I have reinstalled all the drivers in such order as advised by Dell. Despite puts everything in order, I couldn't do my built-in webcam work. More... now I can't even access the Dell factory restore option despite the fact that my recovery disk is intact and it is to have all the files into it!
  • I tried the utility dell online Diagnostics. He could not detect any error webcam!
  • Few days back, I used the dell startup screen diagnostic utility and scanned the built-in webcam to find errors, and my webcam failed in all tests! Here are the screenshots of the tests:

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  I GUESS I GAVE ENOUGH INFORMATION THAT CAN HELP TO DIAGNOSE THE PROBLEM WITH MY DELL INTEGRATED WEBCAM... I ASKED DELL CUSTOMER SERVICE TO HELP ME SOLVE MY PROBLEM OF WEBCAM... AND ALSO THE FACTORY RESTORE INACCESSIBILITY PROBLEM... PLEASE HELP ME...

  AFTER AN ENTIRE WEEK OF UNINSTALLING - REINSTALLING VARIOUS DRIVERS & SOFTWARE FOUND IN THESE FORUMS, SUGGESTIONS INCLUDING REINSTALLING WINDOWS FROM DELL DATA SECURE BACKUP.  THIS IS WHAT I LEARNED.

  My problem was. No supported webcam not connected when I ran dell webcam central. No program could access the webcam. Device Manager showed SPECIFIC DEVICE. Camera suddenly stopped working! I had a little more hair when this problem started.

  I have Inspiron N4010 windows 7 Home premium. Are the drivers for the webcam in windows 7, there is no separate drivers available anywhere. with the exception of some XPS models.

  A post in these forums suggests to abolish the plastic around the display bezel. It's simple. Just carefully go around and remove. It is clipped without screws on my system. This gives access to the webcam hardware. I got dell webcam central on-board. (showing no supported webcam connected!). Gently, I tried to disconnect the connector of the webcam. My intention was to disconnect and reconnect. I barely touched and the fire came and windows immediately started to install device drivers. A beep and an icon in the notification bar popped up. A few minutes, I saw my beautiful mug on the screen to my absolute delight.

  Guys, if you have a problem where Device Manager does not recognize your webcam for most probably, this is a hardware problem. The small rectangular plate on which is mounted the webcam is not properly secured by DEll. It is a DESIGN PROBLEM. The Board is located in place on two small round plastic holders without any screws. It can move easily. The bezel plastic when it is installed itself that holds it in place, but not very effective. When you open and close the lid of the screen, especially if you are taking in the middle where the camera you finally loose connector. That's why some messages will tell you what they camera has stopped working suddenly and then started working by himself all of a sudden. When I put the bezel plastic, it snaps into place, I was able to move the camera, and it stopped working again. A little gentle jiggle got running again and its been since.

  It does not matter what version of central webcam you have in windows 7. It runs on windows Vista service pack 2 compatibility mode. (Find WEBCAMDELL2. EXE file under programs x 86-dellwebcam-dellwebcam Central-dell webcam central. Right-click on the file name. Select Properties. Select the Compatibility tab and run this program in compatibility select windows vista service pack 2).

  If in your case even though there might be a software problem. always try this simple 2 minute solution b4 safe spending frustrating days find the drivers and software. Hope this post helps someone. May work on other systems too! Good luck! and thank you to the guy who led me down this path and misery!

• I tried to load Flash Player on my XP computer but have of find undesirable equipped engines, namely Binkiland and Bing, neither of which I wanted to and I can't delete them because they do not appear in the list programs. Can you please help.

  I tried to load Flash Player on my XP computer but have of find undesirable equipped engines, namely Binkiland and Bing, neither of which I wanted to and I can't delete them because they do not appear in the list programs. Can you please help.

  Hello Maria,.

  Thank you very much for the link, which worked well. Some of the other times that I tried to load Flash Player were presented by the site and also the search engine. You will understand that I am not very computer savy!

  Once again thank you.

  Chris.

• I need to reactivate Photoshop CS4 because I have a new hard drive in a reminder for my 2.5 yr old iMac last operating system running. When you open the program, I was told to contact Adobe support and give them an error code: 150:30. Please help with per

  I need to reactivate Photoshop CS4 because I have a new hard drive in a reminder for my 2.5 yr old iMac last operating system running. When you open the program, I was told to contact Adobe support and give them an error code: 150:30. Please help with permission. ?

  You can repair it yourself. I have a screenshot guide. You use app the Mac Terminal and a python (.py) script that comes with the recovery of the license for the Mac package.

  Don't forget to leave a space after typing sudo python and note that your password will not display any points. Simply enter it blind.

  Start 11 Message and take your time. It does not work. Layout error 150:30 opening Photoshop cs4 on Macbook Pro

  Gene

• Hello! I have to cancel my membership for the creative cloud plan but I find no different contact of live chat. I need TO cancel before March 22. Please help me!

  Hello! I have to cancel my membership for the creative cloud plan but I find no different contact of live chat. I need TO cancel before March 22. Please help me!

  This is an open forum, not the Adobe support... You need Adobe support to cancel a subscription

  -Start here https://forums.adobe.com/thread/1703848

  -or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  -as well as two links that can provide more details, if the links above don't help

  -http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

• Please add the option of power/link to download new pdfs with editing in the browser. I have a restaurant customer who is constantly updating their menu! Please help so that they can do it themselves!

  Please add the option of power/link to download new pdfs with editing in the browser. I have a restaurant customer who is constantly updating their menu! Please help so that they can do it themselves!

  Not the answer you want, but you could set up your quick customer with an ftp upload which would replace the existing pdf. I use Transmit and it would allow your customer to simply drag and drop on a folder.

• Please help asap custom the grid fill is displayed

  I created a custom grid spacing value 2, gray fill. No matter HOW I export it, it shows just like a gray fill. Please help me I have it out as soon as possible it makes me crazy!

  Ccasati wrote:

  > I've created a custom grid spacing value 2, gray fill. No matter HOW I
  > export, it shows just like a gray fill. Please help I have this out
  > as soon as possible it makes me crazy!

  Custom fillings are Postscript code. They will not print to the non-Postscript
  printers. If you do not have a Postscript printer, you can export to a
  PostScript file or EPS file and use Acrobat Pro/Distiller to create a PDF file.

  If you speak of the grid to view > grid, then it's a nonprinting grid
  similar to the guides. Its purpose is to help the layout.

  If you want to create a custom grid that allows to print on all printers and
  correctly export to many formats, use a Fill in mosaic.

  Judy Arndt

• Installation of the Complutense University of MADRID - need your help very badly - please help

  omg!!!!!!!!!!!!!! I had a moment difficult installing oracle UCM in my system...
  I managed to get the homepage but wen I click on a link, it says
  
  "The/idc3/idcplg requested URL was not found on this server."
  
  My induction is that iam not configure my cgi properly Setup in apache...
  
  Here are the necessary info:
  
  OS: WIndows 7
  Web server: apache 2.2
  
  Please find my file config apache below: (httd.conf)
  
  #
  # This is the main Apache HTTP server configuration file. It contains the
  configuration directives # that give the server its instructions.
  # See < URL: http://httpd.apache.org/docs/2.2 > for more information.
  # See especially
  # < URL: http://httpd.apache.org/docs/2.2/mod/directives.html >
  # for an analysis of each configuration directive.
  #
  # Do NOT simply read the instructions here without understanding
  # what they do. They are there only as advice or reminders. If you do not know
  # consult the online documentation. You have been warned.
  #
  # Configuration and logfile names: If the file names that you specify for a lot
  number of files in server control begin by "/" (or "drive: / 'for Win32 '), the
  # server uses this explicit path. If the file names do not start
  # with "/", the value of ServerRoot directive is preceded by - so "logs/foo.log.
  # with ServerRoot value "(x 86) C:/Program Files/Apache Software Foundation/Apache2.» 2' will be interpreted by the
  # Server as "(x 86) C:/Program Files/Apache Software Foundation/Apache2.2/logs/foo.log".
  #
  # NOTE: Where file names are specified, you must use forward slashes
  # instead of backslashes (e.g. "c:/apache" instead of "c:\apache").
  # If a drive letter is omitted, the drive on which httpd.exe is located
  # will be used by default. It is recommended that you always provide
  # an explicit drive letter in absolute paths to avoid confusion.
  
  #
  # ServerRoot: The top of the directory under which the server tree
  # configuration, error and the log files are kept.
  #
  # Do not add a bar slash at the end of the directory path. If you point
  # ServerRoot to non-local disk, remember to point the LockFile directive
  # to a local disk. If you want to share the same multiple ServerRoot
  demons of # httpd, you will need to change at least the LockFile and PidFile.
  #
  ServerRoot "C:/Program Files (x 86) /Apache Software Foundation/Apache2.» 2. "
  
  #
  # Listen: Allows you to bind Apache to specific IP addresses and/or
  ports #, instead of the default value. See also the < VirtualHost >
  directive #.
  #
  # Change this to listen on specific IP addresses below for
  # prevent Apache glomming on all related IP addresses.
  #
  #Listen 12.34.56.78:80
  Listen to 90
  
  #
  # Dynamic Shared Object (DSO) Support
  #
  # To be able to use the features of a module that was built as a DSO you
  # duty place corresponding 'LoadModule' lines at this location until the
  # the directives that it contained are actually available before their use.
  # Modules statically compiled (those listed by "httpd-l") is not necessary
  # to be responsible here.
  #
  # Example:
  # LoadModule foo_module modules/mod_foo.so
  #
  LoadModule modules/mod_actions.so actions_module
  LoadModule alias_module modules/mod_alias.so
  LoadModule modules/mod_asis.so asis_module
  LoadModule auth_basic_module modules/mod_auth_basic.so
  #LoadModule auth_digest_module modules/mod_auth_digest.so
  #LoadModule authn_alias_module modules/mod_authn_alias.so
  #LoadModule authn_anon_module modules/mod_authn_anon.so
  #LoadModule authn_dbd_module modules/mod_authn_dbd.so
  #LoadModule authn_dbm_module modules/mod_authn_dbm.so
  LoadModule modules/mod_authn_default.so authn_default_module
  LoadModule authn_file_module modules/mod_authn_file.so
  #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
  #LoadModule authz_dbm_module modules/mod_authz_dbm.so
  LoadModule modules/mod_authz_default.so authz_default_module
  LoadModule modules/mod_authz_groupfile.so authz_groupfile_module
  LoadModule modules/mod_authz_host.so authz_host_module
  #LoadModule authz_owner_module modules/mod_authz_owner.so
  LoadModule modules/mod_authz_user.so authz_user_module
  LoadModule autoindex_module modules/mod_autoindex.so
  #LoadModule cache_module modules/mod_cache.so
  #LoadModule cern_meta_module modules/mod_cern_meta.so
  LoadModule modules/mod_cgi.so cgi_module
  #LoadModule charset_lite_module modules/mod_charset_lite.so
  #LoadModule dav_module modules/mod_dav.so
  #LoadModule dav_fs_module modules/mod_dav_fs.so
  #LoadModule dav_lock_module modules/mod_dav_lock.so
  #LoadModule dbd_module modules/mod_dbd.so
  Modules/mod_deflate.so deflate_module #LoadModule
  LoadModule modules/mod_dir.so dir_module
  #LoadModule disk_cache_module modules/mod_disk_cache.so
  #LoadModule dumpio_module modules/mod_dumpio.so
  LoadModule env_module modules/mod_env.so
  #LoadModule modules/mod_expires.so expires_module
  #LoadModule ext_filter_module modules/mod_ext_filter.so
  #LoadModule file_cache_module modules/mod_file_cache.so
  #LoadModule filter_module modules/mod_filter.so
  #LoadModule modules/mod_headers.so headers_module
  #LoadModule ident_module modules/mod_ident.so
  #LoadModule imagemap_module modules/mod_imagemap.so
  LoadModule modules/mod_include.so include_module
  #LoadModule info_module modules/mod_info.so
  LoadModule modules/mod_isapi.so isapi_module
  #LoadModule ldap_module modules/mod_ldap.so
  #LoadModule logio_module modules/mod_logio.so
  LoadModule log_config_module modules/mod_log_config.so
  #LoadModule log_forensic_module modules/mod_log_forensic.so
  #LoadModule mem_cache_module modules/mod_mem_cache.so
  LoadModule mime_module modules/mod_mime.so
  #LoadModule mime_magic_module modules/mod_mime_magic.so
  LoadModule negotiation_module modules/mod_negotiation.so
  #LoadModule modules/mod_proxy.so proxy_module
  #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
  Proxy_balancer_module modules/mod_proxy_balancer.so #LoadModule
  Modules/mod_proxy_connect.so proxy_connect_module #LoadModule
  Proxy_ftp_module modules/mod_proxy_ftp.so #LoadModule
  Modules/mod_proxy_http.so proxy_http_module #LoadModule
  #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
  #LoadModule reqtimeout_module modules/mod_reqtimeout.so
  #LoadModule rewrite_module modules/mod_rewrite.so
  LoadModule setenvif_module modules/mod_setenvif.so
  Modules/mod_speling.so speling_module #LoadModule
  Modules/mod_ssl.so ssl_module #LoadModule
  #LoadModule modules/mod_status.so status_module
  #LoadModule substitute_module modules/mod_substitute.so
  #LoadModule unique_id_module modules/mod_unique_id.so
  #LoadModule userdir_module modules/mod_userdir.so
  #LoadModule usertrack_module modules/mod_usertrack.so
  #LoadModule version_module modules/mod_version.so
  #LoadModule vhost_alias_module modules/mod_vhost_alias.so
  
  < IfModule! mpm_netware_module >
  < IfModule! mpm_winnt_module >
  #
  # If you want httpd to run as a different user or group, you must run
  # httpd as root initially and it will pass.
  #
  # Group / user: the name (or #number) of the user/group to run httpd as.
  # It is generally advisable to create a dedicated and aggregatable for user
  # httpd, as with most system services are running.
  #
  Demon of the user
  Daemon group
  
  < / IfModule >
  < / IfModule >
  
  Server configuration # 'hand '.
  #
  # The directives in this section implement the values used by the 'hand '.
  # Server, which meets all demands that are not managed by a
  definition of # < VirtualHost >. These values also provide defaults for
  # all < VirtualHost > containers you can set later in the file.
  #
  # All these directives may appear inside containers < VirtualHost >,.
  # in which case the value default parameters will be substituted for the
  virtual host of # being defined.
  #
  
  #
  # ServerAdmin: Your address, where problems with the server should be
  # e-mail. This address appears on some generated by the page server, such
  # as error documents. for example [email protected]
  #
  ServerAdmin [email protected]
  
  #
  # ServerName gives the name and the port used by the server to identify itself.
  # This can often be determined automatically, but we recommend that you specify
  # explicitly to avoid problems during startup.
  #
  # If your host doesn't have a registered DNS name, enter its IP address here.
  #
  #ServerName bhuramish - HP.vc.shawcable .net: 80
  
  #
  # DocumentRoot: The directory you are going to use your
  documents #. By default, all requests are taken from this directory, but
  aliases and symlinks # can be used to point to other locations.
  #
  #DocumentRoot "C:/Program Files (x 86) /Apache Software Foundation/Apache2.2/htdocs.
  DocumentRoot "C:/Oracle/ucm/server3/weblayout.
  
  #
  # Each directory that Apache has access can be configured in respect
  # to which services and features are allowed and/or disabled in this
  # Directory (and its subdirectories).
  #
  # Everything first, we configure the 'default' to be a very restrictive of game
  features #.
  #
  < directory / >
  Options FollowSymLinks
  AllowOverride None
  Order deny, allow
  Refuse to all the
  < / Book >
  
  #
  # Note that, from this point forward you must precisely enable
  features special # to be enabled - so if something doesn't work not as
  # you might expect, make sure that you have specifically enabled it
  # below.
  #
  
  #
  # This should be replaced by what you set DocumentRoot.
  #
  # < directory "C:/Program Files (x 86) /Apache Software Foundation/Apache2.2/htdocs" >
  < directory "C:/Oracle/ucm/server3/weblayout" >
  #
  # Possible values for the Options directive are "None", "All."
  # or any combination of:
  # Indexes includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
  #
  # Note that "MultiViews" must be named explicitly -'all Options '.
  # is not give it to you.
  #
  # The Options directive is complex and important. Please see
  # http://httpd.apache.org/docs/2.2/mod/core.html#options
  # For more information.
  #
  Options Indexes FollowSymLinks
  
  #
  # AllowOverride controls what directives may be placed in .htaccess files.
  # It can be 'All', 'None', or any combination of key words:
  # Options FileInfo AuthConfig Limit
  #
  AllowOverride None
  
  #
  # Controls who can get stuff from this server.
  #
  Order allow, deny
  Allow all the
  
  < / Book >
  
  #
  # DirectoryIndex: sets the file Apache will serve if a directory
  # is requested.
  #
  < IfModule /idc3 >
  DirectoryIndex portal.htm
  IdcSecurity idc3
  < / IfModule >
  
  #
  # The following lines prevent the .htaccess and .htpasswd files to be
  # seen by customers of the Web.
  #
  < FilesMatch "^ \.ht" > "".
  Order allow, deny
  Refuse to all the
  Meet all
  < / FilesMatch >
  
  #
  # ErrorLog: The location of the error log file.
  # If you do not specify an ErrorLog directive in a < VirtualHost >
  # container, error messages related to this virtual host will be
  # logged here. If you do define a for a < VirtualHost > error log
  container of #, that host errors will be logged there and not here.
  #
  ErrorLog logs / 'error.log '.
  
  #
  # LogLevel: Control the number of messages in the error_log.
  # Possible values include: debug, info, notice, warn, error, crit,.
  # emerg, alert.
  #
  LogLevel warn
  
  < IfModule log_config_module >
  #
  # The following directives define some nicknames format for use with
  # a directive CustomLog (see below).
  #
  "LogFormat '%%u %t \"%r\ hour' % > s \"%{Referer}i\ %b" \"%{User-Agent}i\" "handset"
  "LogFormat '%%u %t \"%r\ hour' % > s %b "commune
  
  < IfModule logio_module >
  # You must enable mod_logio.c use %I and frequency
  "" LogFormat '%%u %t \"%r\ hour' % > s %b \"%{Referer}i\ "\"%{User-Agent}i\ "%I %o "combinedio
  < / IfModule >
  
  #
  # The location and format of the access (Common Log Format) log file.
  # If you do not have any logfiles access set in a < VirtualHost >
  container of #, they will be saved here. On the other hand, if you the do
  # define per - < VirtualHost > access logfiles, transactions will be
  # logged there and not in this file.
  #
  Common CustomLog "logs/access.log.
  
  #
  # If you prefer a log file of access, agent, and referer information
  # (Combined logfile format) you can use the following directive.
  #
  #CustomLog "logs/access.log' combined
  < / IfModule >
  
  < IfModule alias_module >
  #
  # Redirect: Allows to tell clients the documents used for
  # exist in your server's namespace, but no more. The customer
  # make a new request for the document at its new location.
  # Example:
  # Redirect permanent/foo http://bhuramish-HP.vc.shawcable.net/bar
  
  #
  # Alias: Maps web paths into paths of file system and is used to
  # access content that don't live under the DocumentRoot directive.
  # Example:
  LoadModule IdcApacheAuth C:/Oracle/ucm/server3/shared/os/win32/lib/IdcApache22Auth.dll
  IdcUserDB idc 'C:/Oracle/ucm/server3/data/users/userdb.txt '.
  Alias /idc3 C:/Oracle/ucm/server3/weblayout
  < /idc3 location >
  Order allow, deny
  Allow all the
  DirectoryIndex portal.htm
  IdcSecurity idc3
  < / location >
  #
  # If you include a trailing / on /webpath, then the server will be
  # require that he be present in the URL. It is also likely that
  # duty provide a < Directory > section to allow access to
  # the path to the file system.
  
  #
  # ScriptAlias: This controls which directories contain server scripts.
  # ScriptAliases are essentially the same as assumed names, except that
  # documents in the target directory are treated as applications and
  # executed by the server on demand, rather than as documents sent to the
  client of #. The same regulation on flight "/" applies to the ScriptAlias
  # as for the Alias directives.
  #
  ScriptAlias /idcplg/ "C:/Oracle/ucm/server3/weblayout / '.
  
  < / IfModule >
  
  < IfModule cgid_module >
  #
  # ScriptSock: On threaded servers, refers to the access path to the UNIX
  decision # used to communicate with the CGI mod_cgid daemon.
  #
  Newspapers/cgisock #Scriptsock
  < / IfModule >
  
  #
  # "C:/Program Files (x 86) /Apache Software Foundation/Apache2.2/cgi-bin" should be replaced by everything that your ScriptAlias
  # CGI directory exists, if you have set up.
  #
  < directory "C:\Oracle\ucm\server3\weblayout" >
  AllowOverride None
  None of the options
  Order allow, deny
  Allow all the
  < / Book >
  
  #
  # DefaultType: Server default MIME type used for a document
  # If it cannot establish also as file name extensions.
  # If your server contains mainly text or HTML documents, it is "text/plain".
  # a good value. If your content is binary, such as applications
  # or images, you can use "application/octet-stream" instead of
  # Keep browsers try to view binary files, as if they were
  # text.
  #
  DefaultType text/plain
  
  < IfModule mime_module >
  #
  # TypesConfig points to the file containing the list of mappings from
  # MIME file extension - type.
  #
  TypesConfig conf/mime.types
  
  #
  # AddType allows you to add or replace the MIME configuration
  # the file specified in TypesConfig for specific file types.
  #
  #AddType application/x-gzip .tgz
  #
  # AddEncoding allows you to have certain browsers uncompress
  # information on the fly. Note: Not all browsers support this.
  #
  #AddEncoding x-compress. Z
  #AddEncoding x-gzip .gz .tgz
  #
  # If the AddEncoding directives above are commented out, then you
  # should probably define these extensions to indicate media types:
  #
  AddType application/x-compress. Z
  AddType application/x-gzip .gz .tgz
  
  #
  # AddHandler allows you to map certain "manipulators": file extensions
  # No actions associated with the file type. It can be either integrated into the server
  # or added to the directive of the Action (see below)
  #
  # To use CGI outside of ScriptAlias directories scripts:
  # (You will also need to add "ExecCGI" to the "Options" directive.)
  #
  AddHandler cgi-script .cgi
  
  # For maps of type (negotiated resources):
  #AddHandler type-plan of the var
  
  #
  # Filters allow you to process content before sending it to the client.
  #
  # To parse .shtml for server-side includes (SSI) files:
  # (You will also need to add "Includes" the "Options" directive.)
  #
  #AddType text/html .shtml
  #AddOutputFilter INCLUDES .shtml
  < / IfModule >
  
  #
  # The mod_mime_magic module allows the server to use various boards of the
  content of the file itself to determine its type. The MIMEMagicFile
  # directive tells the module where the definitions of suspicion.
  #
  #MIMEMagicFile conf/magic
  
  #
  # Customizable error responses come in three flavors:
  ((# 1) text 2) local redirects 3) external redirects
  #
  # Examples:
  #Error Document 500 "The server made a boo boo".
  #Error Document 404 Missing.html
  #Error Document 404 "/cgi-bin/missing_handler.pl"
  #Error Document 402 http://bhuramish-HP.VC.shawcable.NET/subscription_info.html
  #
  
  #
  # MaxRanges: Number of channels in a Maximum request before
  # return the resource, or 0 for unlimited
  # Default is to accept 200 lines
  #MaxRanges 0
  
  #
  # EnableMMAP and EnableSendfile: on systems that support.
  projection in memory # or the sendfile syscall is used to deliver
  # files. Usually, this improves the performance of the server, but must
  # turn off when mounted network is served
  # file systems or if support for these functions is also
  # broken on your system.
  #
  #EnableMMAP off
  #EnableSendfile off
  
  # Additional configuration
  #
  # The configuration files in the conf/extra/directory can be
  # included to add additional features or change the default configuration
  # the server, or you can simply copy their content here and change as
  # necessary.
  
  # Server-pool management (MPM specific)
  #Include conf/extra/httpd-mpm.conf
  
  # Multilingual error messages
  #Include conf/extra/httpd-multilang-errordoc.conf
  
  # Entries to the fancy directory
  #Include conf/extra/httpd-autoindex.conf
  
  # Language settings
  #Include conf/extra/httpd-languages.conf
  
  # User directories
  #Include conf/extra/httpd-userdir.conf
  
  # Info in real time on the applications and configuration
  #Include conf/extra/httpd-info.conf
  
  # Virtual hosts
  #Include conf/extra/httpd-vhosts.conf
  
  # Local access to the manual for the Apache HTTP Server
  #Include conf/extra/httpd-manual.conf
  
  # Distributed authoring and versioning (WebDAV)
  #Include conf/extra/httpd-dav.conf
  
  # Various default settings
  #Include conf/extra/httpd-default.conf
  
  # Secure connections (SSL/TLS)
  #Include conf/extra/httpd-ssl.conf
  #
  # Note: The following text should be present to support
  # start without SSL on platforms without equivalent/dev/random
  but # a statically compiled in mod_ssl.
  #
  < IfModule ssl_module >
  SSLRandomSeed startup builtin
  SSLRandomSeed connect builtin
  < / IfModule >
  
  My CONFIG.cfg file:
  
  <? jcharset cfg = "UTF8"? >
  Server #Content System Properties
  IDC_Name = idc3
  IdcProductName = idccs
  SystemLocale = English-United States
  InstanceMenuLabel = idc3
  InstanceDescription = idc3 content server
  SocketHostAddressSecurityFilter = 127.0.0.1
  
  Variable #Database
  IsJdbc = true
  JdbcDriver = net .sourceforge .jtds .jdbc .driver
  JdbcConnectionString = jdbc:jtds:sqlserver://bhuramish-HP:1433 / OracleECM
  JdbcUser = ecm
  JdbcPassword = VZU64a2zvfxn4H/vxFslVk0wdHELfmeJ4z + xMB5g4Rw =
  JdbcPasswordEncoding = Intradoc
  
  Variable #Internet
  HttpServerAddress = bhuramish - HP: 90
  Mail = mail server
  SysAdminAddress=sysadmin@mail
  HttpRelativeWebRoot = / idc3.
  CgiFileName = idcplg
  UseSSL =
  WebProxyAdminServer = true
  
  #General option Variables
  
  Variable #Additional
  DatabaseType = mssql
  JAVA_CLASSPATH_customjdbc=$SharedDir/classes/jTDS-1.2.4.jar
  SearchIndexerEngineName = DATABASE. METADATA
  Server web apache =
  IdcAdminServerPort = 2220
  IntradocServerPort = 2222
  
  Please help me on this... I worked in stellent IBPM 7.6 sp2 in a large cpompany and never had the opportunity to work on Setup frm scrach...
  
  See you soon
  Vivek
  
  Published by: 887781 on September 27, 2011 19:10

  Hello

  instance of #ucm10g

  LoadModule IdcApacheAuth IdcApache22Auth.dll
  Idc3 IdcUserDB '/data/users/userdb.txt '.

  /Idc3 alias "/weblayout".
  
  Order allow, deny
  Allow all the
  DirectoryIndex portal.htm
  IdcSecurity idc3
  

  This is how apache entries must be.

  Make the changes as above, and then restart Apache, Complutense University of Madrid.

  Test to see if the problem still persists.

  Thank you
  Srinath