RV042G which model is the big brother of this router?

Similar Questions

• which way is the best to write this query?

  Hello
  consider the following 2 queries
  
  SCENARIO 01
  =========
  Select a.company_name, a.company_address, a.company_contact, b.item_name, b.item_unit_price
  of company_master an inner join company_items b on a.company_id = b.company_id
  
  SCENARIO 02
  =========
  Select a.company_name, a.company_address, a.company_contact, b.item_name, b.item_unit_price
  company_master a, company_items b
  where a.company_id = b.company_id
  
  which method is the fastest? (more than 1000 companies and 1000000 + elements) is 01 or 02?
  and what is the 2nd method usually called? ;)

  novicedba wrote:
  Hello
  consider the following 2 queries

  SCENARIO 01
  =========
  Select a.company_name, a.company_address, a.company_contact, b.item_name, b.item_unit_price
  of company_master an inner join company_items b on a.company_id = b.company_id

  SCENARIO 02
  =========
  Select a.company_name, a.company_address, a.company_contact, b.item_name, b.item_unit_price
  company_master a, company_items b
  where a.company_id = b.company_id

  which method is the fastest? (more than 1000 companies and 1000000 + elements) is 01 or 02?
  and what is the 2nd method usually called? ;)

  Queries are probably the same, the difference being one are written in ANSI SQL and the other in SQL ANSI traditional pre. To be sure, test the two - get execution plans, execution and execute the metrics.

  What is the best, it is to you. Some people prefer ANSI that uses IT to indicate the joins and WHERE indicated condtions filter; Personally, I prefer the traditional syntax it is easier to read.

  Outer joins make queries run more slowly. Avoid them if you can. Outer joins are used to return a row in a table if the join data does not exist in the other table. Once again, they degrade performance.

  Cross joins are almost never necessary. They are useful to indicate joins Cartesian intentional for the results of Matrix Games. Cartesian joins are notorious for using too many system resources (especially when you work with a large amount of data) and returrning of incorrect results and can happen by running a join without specifying a join condition: all columns will be joined between the two tables, even when they do not match. In 10g and 11g the optimizer sometimes will perfom Cartesian joins make queries run faster but is always scary to see the "Cartesian" word in an execution plan

• Why has the big green box - "this site is secure" disappeared from a firefox restart to fix the slowness?

  Since to perform a reboot of the green box "this is a secure site" is not displayed on the side of the results when searching for topics in google? That was before I did. He cannot explain in computer language!

  It seems that this feature was provided by the extension of security online Avast, which is currently disabled on your system. To reactivate,

  1. Open the Add-ons Manager (hold down the CTRL and Shift , press A).
  2. In the Add-ons Manager, open the Extensions category on the left side.
  3. Next to the entrance of Avast security online, click the Activate button. You may need to restart Firefox for the changes to take effect.

• Gradients - someone can give me the 'big picture' on this topic?

  I am a beginner confessed, but able to read this manual and to make progress. However, I can not get my head around 'degraded' - in other words, when should you use the gradient "tool" and when do you use gradient "adjustment layers"?  Put another way, are there specific things that can only do the gradient tool? (forget destructive and non destructive editing - just possible effects). The only thing that sticks in my mind, it's this small line that you draw to control the degree of applied gradient in the gradient tool.

  Everything you care to provide would be much appreciated!

  There, it's just that it is called a gradient fill (layer-> fill new layer-> gradient or choose Gradient between black and white circle at the bottom of the layers Panel icon)

• Big Brother Email alerts

  Our team of Engineeing supports multiple servers, including those of another group. We use the Big Brother v.4.5 to monitor these servers, and our team gets all the email and SMS alerts. The guys from IT of the other group, we support want to start alert recieing just to their servers - how I edit config files to continue to send our team all alerts, and only send alerts for specific recipients email servers in the outher IT group? Any suggestions are greatly appreciated.

  See bbwarnrules.cfg on your download host.

  In your rules to add servers so they want notifications, while addresses e-mail notification. Also add the alert e-mail address you have for the default notifications. Not to do so will send alerts for them and no one else.

  If servers or e-mail addresses are many, you could define hg - and pg-groups.

• Big Brother 5.0 on Windows 2008R2

  Hello

  I just installed the Big Brother 5.0 on Windows server 2008 R2. I have experience using the server on Solaris, but Windows is new to me.

  I installed IIS, that was required, and has successfully installed the server. However, when I try to navigate to it the behavior is very strange:

  1. When you browse http://localhost/bb - everything seems fine. Server host and a customer, I added are dispalyed on the home page and I can navigate between tabs. However, whenever I click on a controlled column (for example, conn) Web site returns an error that is not found.

  2. When you browse http://ip_address/bb the server host is not displayed. I can't navigate to Management tab as when I click nothing happens.

  Please advise?

  Kind regards

  Hello

  1. have you met all of the requirements for the installation of BB on Windows 2008? A little extra configuration in IIS is required if you are installing the 2008. The release notes, or this blog: http://communities.quest.com/community/big-brother/blog/2011/04/07/bbserver-install-on-windows-2008 talks about the warnings of installation on Windows 2008.

  2. not really enough info go here. Check the value of BBWEBHOST in your %BBHOME%\etc\bbdef.cfg is a domain name FULL can be resolved, hostname or IP address.

  -Paul

• Dragging several media in vertically stacked tracks clips in the timeline? Is this possible?

  Hoping that some Adobe Premiere Guru might be able to lend insight into what apparently should be a fairly simple thing to do... but despite scouring the web, I can't seem to find a glance of a solution for this.

  My neighbor (who, either by the way, I got to go with first CS5.5 as its NLE of choice as a result of uncertainty FCPX) working on a project of 'reality-style' where they have a massive amount of cameras working simultaniouisly hours and hours on end. think that the style of the Big Brother House.

  Essentially for every hour of the sequence, he creates a project in which all the multiple camera (MOV) of the images of this time are listed/linked to the thread in the project Panel. For example, for the TIME being ONE, it has images of all 20 cameras (or other) currently one that there are listed.

  BASICALLY what he wants to be able to do is to grab ALL the sequences of these different cameras AT the SAME TIME, drag them on the timeline, and when he leaves fall there, the video (and, conversely, audio) clips STACKED vertically, one above the other, each taking its own course in the timeline panel.

  Currently, of course, when he does the images organizes itself in the end-to-end scenario. In the case of my HOUR ONE, 20 example of CAMERA, this essentially creates a long clip of 20 hours, as unlike a clip of an hour with 20 tracks, stacked one on the other.

  As far as we can tell, have there is no shortcut to get there. I VAGUELY remember being able to do this in FCP (maybe?) so I'll be dazed and more than just a little disappointed if there isn't a way to pull this off in first.

  Does anyone have an idea if this mode to automatically fall of clips in the timeline as superimposed tracks is possible? It, literally, to save him hours and hours of work if he can understand the secret. And I don't feel as guilty for him after having turned on the creation of this special project!

  And if someone knows that it is NOT possible, it would be great to know as well. At least, we can put the concept of room one way or another.

  Thanks in advance.

  Best regards, Michael

  You can do this with the command sequence camera make multiple source in Premiere Pro CS6 (note that this has been posted before CS6 launch):

  1. Mark clips
  2. Select the clips
  3. Choose item > create sequence multiple camera Source
  4. Choose the style of synchronization, and then click OK
  5. Right-click on the camera sequence multiple source and choose > open in the timeline.
  6. Clips are now stacked inside a sequence

  More details here: http://helpx.adobe.com/content/help/en/premiere-pro/using/editing-multi-camera-sequences1. html #source_sequence_for_multi_camera_editing

• Connect the 2 locations using RV016 router to fill 2 different networks.

  I have a RV016 connected to a comcast cable modem to slot 1 with IP 192.168.6.1

  I have a RV016 connected to a comcast cable modem at the 2 with 192.168.10.1 IP location

  I installed a VPN tunnel from gateway to gateway between 2 routers RV016.

  I have a LAN in slot 1 with the IP 192.168.1.1, which connects to the internet through an Adtran router with 4 lines of T1 servile.

  I have a LAN with IP 192.168.5.1 2 location that connects to the internet through an Adtran router with 3 T1 lines servile.

  I like a computer to location 2 to connect to the RV016 in the local Comcast modem to the Comcast modem at location 1 in the RV016 to slot 1 then go out to the local network at location 1 and communicate with an application server on LAN 1.

  Help, please.

  You can't do that with a RV016. The RV016 only supports layer 3 tunnel. This means that the two ends are different networks with different subnets. The traffic between them is not filled.

  If you want to really two bridged networks, i.e. join in a single LAN with a single IP subnet and a single broadcast domain you need a layer 2 tunnel, for example a tunnel L2TPv3. That works on layer 2, which is on the MAC addresses inside your networks. In this way, you can use the same IP subnet at both ends and on each side, it seems that the other side is connected to the same ethernet network.

  The RV016 does not support the tunneling of layer 2. You can create an IPSec tunnel, which is layer 3. If there is really a need for a tunnel layer 2, you get different devices. I recommend that you evaluate if a layer 2 connection is really necessary or not.

• Big Brother Live Feed will not play or cannot connect to the Web site.

  I can't connect to CBS.com to watch Big Brother Live Feeds. When I hit the button 'connect', or a 'secure connection' error or nothing happens and stays of sign - in the pop-up on the idle screen and won't go away. CBS.com has two different choices to click to connect, or working. It will work in Internet Explorer.

  refer to

  • Resolve the error message "secure connection failed".

  and

  • How to clear the cache of Firefox

  Items to solve this.

• UNIX ext scripts big brother asked to analyze the application logs

  Is there a script to check the application logs to find errors in the application of big brother. ???? Can someone help me on this? And how do I turn the same? on the client computers

  On Solaris, I use the bb-msgstab to do in addition to the follow-up of the ADM file. Example of line below;

  # FORMAT - hostname: logfiles: various parameters: yellow strings: Red strings: strings to ignore on

  Server1: / path/to/errorLog: WARNING: FATAL: IgnoreText

• How can I reset alerts of Big Brother to the color green?

  How do I manually remains big brother alerts?

  I don't know what you are trying to accomplish. If you want to return to the green as soon as possible, is the only one to do to solve the problem. Note that for the 'messages' (check log file), it is not that simple, because it is an entry in a log file. But you can reduce the time that they are yellow/red by changing MSGEXPIRE in bbdef - client.sh on the client. Also, you might (don't know but worth a try) be able to return to the Green by deleting toggle files associated with the log file in $BBHOME / tmp (the * Red * or * yellow * files, a file that needs to be kept is one that contains the last line number, if you remove it, BB will begin from the top of the file and get errors on the next cycle).

• We use photoshop elements 11 to school and home I photoshops items 14 and we do the DVD covers and for my image main I started to go through the tutorial for the image of head exploding and my teacher said that I need the version of 'big brother '.

  I wanted to know what trial should I start?

  First, ask the teacher for a real program name... not something too vague than "big brother version.

  Cloud Plans https://creative.adobe.com/plans

• Strange problem brush which compensates for the model of the line and double it... Help?

  Hey everybody! Last night, I made a brush of Ribbon for a project at work. It worked as it should and I gave it to a colleague of mine so that it could use is as well. This morning, however, my colleague tells me she is having problems with the brush because it wasn't appearing when she used. I opened the file HAVE on my computer to check it out and everything seems fine, the lines that I did the other night not appear correctly. However, when I tried to draw another line and apply the brush, the ground was shifted to the line, AND it seemed to have doubled.

  Here's a sample of what I mean; the top is a line that I drew last night and the bottom is the same line, just copied and pasted below:

  

  I can move the lines, I did the other night, on the model around and it works correctly, but if I copy the line or by using the same brush to draw, I get double up to offset glitch.

  Thank you for taking the time to read this. All advice is appreciated!

  The brush is constructed with a clipping group. This does not work properly.

  You might drag the brush in the Panel forms. Then ungroup. Then take the part of the brush that isn't a corner and use the pathfinder Crop on it.

  Then create a new brush.

  Works for me.

  You can use this file? https://DL.dropboxusercontent.com/u/15485305/ribbon_brush_issue-mg.AI

• iPhone IS - what model is the phone of "Global"?

  Hello

  I am very interested in the iPhone (SE) and intend to buy at the price high. I intend to use T-Mobile as carrier in the United States and also use it when I travel to the Japan and Hong and buy the sim card in these countries and pop in the phone to at least be able to use LTE data, so that it is the CDMA phone or GSM does not concern me as much as the voice call is not so important (I can get by him using VOIP like Skype). I don't want to use roaming when I'm abroad.

  According to the page to support LTE, http://www.apple.com/iphone/LTE/, there are 2 models, A1662 A1723.

  After the online chat with the Apple support, they told me have chosen Sprint as mobile provider will make me the A1723 and other options - at & t, Verizon, T-Mobile, Sim free will make me the A1662.

  Since I want to use T-Mobile in the United States, if my understanding is that only A1662 is supported. But, according to http://www.apple.com/iphone/LTE/, support to the Japan LTE networks are not listed for A1662.

  My question is, is it really true that A1662 is not supported at the Japan? When I look at LTE bands support of these two models, the only group who lack to A1662 are:

  7 (2600 MHz)

  28 (700 MHz APT)

  38 (TD 2600)

  39 (TD 1900)

  40 (2300 TD)

  41 (2500 TD)

  Missing these bands really makes a big difference?

  I currently have iPhone 5 A1429 and successfully used in the Japan with a local SIM card and got the LTE speed, and supported by the A1429 bands are ALL supported by A1662, so I really confused.

  Thanks for reading my long question and hope someone can help us with that.

  This article in PC magazine answers this question http://www.pcmag.com/news/343091/the-iphone-se-is-not-carrier-agnostic

  Basically, it says that the two models sold in the United States will work in the world, but if you buy version Verizon, ATT or TMobil in the States, which are all the same phone, A1662, there the slowest speeds LTE overseas (the Canada and the Russia are mentioned in the article), since it lacks broadband LTE 13.

  The phone Sprint to the United States is another phone, model A1723, and it is the same model sold overseas (except China, which gets its own phone, model A1724), but the Sprint phone does not work on Verizon (lack band 13), and missing also band 29, so it will work on ATT, he won't go to maximum speed for data Although it works perfectly on Tmobil.

  So the simple answer is that all US phones will work abroad, but buy the Sprint phone in the United States is to purchase high speed for global use of the data and that the phone also works on fine Tmobil and ATT, but at speeds slower data, but it will not work on Verizon.

• How can I replace the big picture with the poplet image and add an internal focus on the big picture?

  I need to replace the enlarged image with poplet image when you click on & also need a zoom internal on the big picture. It doesn't seem to be a simple way to do this. Js is available for this please?

  Just drag brett [at] prettydigital.com email Glenn.

  I think that your after...

  -Wide product displayed by default, click left and right you have a cursor of all images of poplet

  -Hover over the big picture without clicking, it's a zoom of the image or (which I think would be better) you click that or one of the poplet images and you have a model coming with a larger image.