RW-50011: error:-connection Apps ORACLE_HOME test returned an error

Similar Questions

• RW-50011: error:-apps oracle_home test connection returned an error: 4

  Hello

  Before getting into the details, let explain me my environment.

  Virtual Box on top of Mac OS X

  Oracle Linux 6.5 on top of Virtual Box

  2-node - the node of the database and the Application node

  I use Oracle E-Business Suite Installation and Notes of version 12 (12.1.1) for Linux x 86-64 upgrade (Doc ID 761566.1()

  I have install Oracle EBS r12.1.1 again and again just to get better and better and improve the documentation as I go along. I was able to install the database without error layer at all. And for the most part, everything is going very well on the layer application until I get to the end and I noticed on the adautocfg.sh application layer ends with success, and then I see rw-50011: error:-apps oracle_home test connection returned an error: 4. at first, I thought it was permission then I added the root and my user appebs for all groups that did and I also made each Directory was 777 permissions. As I drove deep into the logs, I noticed that the riwTDBup.sh of ended not because it could not open the database. I noticed that riwTDBup.sh called sets in environment in $INST_HOME/ora/10.1.2/ and then tries to start a receiver located at $INST_HOME/ora/10.1.2/network/admin - this is where I see that no listener has been created. A tnsnames.ora is there but no listener. So I went to $ADMIN_SCRIPTS and I try to manually start the receiver and although his place as well and it is said that there is no listener for APPS_VIS. How is it, my interlocutor is not be created and can someone tell me what am I did not right, why it is constantly at the end of the installation. What newspapers do you need to see to help me with this question?

  
  

  Thanks in advance
  

  Hey Hussein snoussi-Oracle,.

  I'm mad at myself. After having sitting just think and get back to the basics... Why my application server cannot connect to my database, especially after the fact that I did this install successfully before? After decision on the fact that both servers could talk to each other, a light bulb off, I knew it was something blocking the connection and then I thought about it. LOL, that was the firewalls. I deleted the application server and restart installation with two disabled firewalls and it worked even fix the error of libgcc_s.so, installing crossed without errors at all, everything was fine with my host and domain name. LOL, I can finally say that I can install Oracle EBS R12.1 without errors.

  Even if it took my whole weekend, I wouldn't change a thing. I learned so much troubleshooting idea, funny how you can look in hindsight and appreciate the growing pains. Thanks Hussein for all the help! Next upgrade of database and applications, then learn how to install Rac and how to install EBS on rac and Oracle EBS on PAP management, if you have any suggestions on where to go to learn these things it would be awesome!

• RW-50011: error:-the availability of utility systems test returned the error 1

  Dear Experts,
  
  Please note that we receive the below error. Please notify.
  
  
  These utilities must be available on your system in order to perform administrative tasks.
  
  command: /StageR12.1_linux/startCD/Disk1/rapidwiz/bin/adchkutl.sh
  
  Check to make... found - / usr/bin/make
  Verification of the ld... found - / usr/bin/ld
  Checking the gcc...
  Cannot find 'gcc' utility on the way
  Control of g ++...
  Could not find ' g ++ ' utility on the way
  Control of the ar... found - / usr/bin/ar
  Could not locate all of the utilities with a system path.
  Path = /usr/bin:/StageR12.1_linux/startCD/Disk1/rapidwiz/unzip/Linux_x64:/usr/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin
  who: no gcc in (/ usr/bin:/StageR12.1_linux/startCD/Disk1/rapidwiz/unzip/Linux_x64:/usr/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin)
  who: no g ++ in (/ usr/bin:/StageR12.1_linux/startCD/Disk1/rapidwiz/unzip/Linux_x64:/usr/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin)
  
  
  RW-50011: error:-the availability of utility systems test returned an error: 1
  
  
  concerning
  Mohammed Abdul Muqiit

  Cannot find 'gcc' utility on the way

  Make sure that gcc is installed in accordance with the following documentation.

  Installation of Oracle E-Business Suite and 12 (12.1.1) for Linux x 86 version upgrade Notes [ID 761564.1]
  Oracle E-Business Suite installation and upgrade version Notes 12 (12.1.1) for Linux x 86-64 [ID 761566.1]

  Thank you
  Hussein

• RC-40201: unable to connect to the TEST database running adcfgclone.pl appsTier

  Hi Experts,

  While performing a cloning my instance of R12, I got RC-40201 error when I ran "adcfgclone.pl appsTier.

  [appltst@oracleupk bin] $ perl adcfgclone.pl appsTier

  Copyright (c) 2002 Oracle Corporation

  Redwood Shores, California, USA

  Applications Oracle rapid Clone

  Version 12.0.0

  adcfgclone Version 120.31.12010000.1

  Enter the password for APPS:

  Running:

  / data/appl_top/apps/apps_st/comn/clone/bin /... / JRE/bin/Java-Xmx600M - cp /data/appl_top/apps/apps_st/comn/clone/jlib/java:/data/appl_top/apps/apps_st/comn/clone/jlib/xmlparserv2.jar:/data/appl_top/apps/apps_st/comn/clone/jlib/ojdbc14.jar oracle.apps.ad.context.CloneContext EI/data/appl_top/apps/apps_st/comn/clone/bin /... /Context/Apps/CTXORIG.xml-valider - pairsfile /tmp/adpairsfile_24425.lst-stade/data/appl_top/apps/apps_st/comn/clone 2 > /tmp/adcfgclone_24425.err; ECHO $? > /tmp/adcfgclone_24425.res

  Logfile located at /data/appl_top/apps/apps_st/comn/clone/bin/CloneContext_0912145803.log

  Provide the values required for the creation of the new file APPL_TOP context.

  Target System Hostname (virtual or normal) [oracleupk]:

  SID data system target: TEST

  Target database system [oracleupk] server node:

  Target system Base Directory: / data / appl_top

  Target system tools ORACLE_HOME directory [/ data/appl_top/apps/tech_st/10.1.2]:

  Target Web ORACLE_HOME directory system [/ data/appl_top/apps/tech_st/10.1.3]:

  Target system APPL_TOP directory [/ data/appl_top/apps/apps_st/appl]:

  Target system COMMON_TOP directory [/ data/appl_top/apps/apps_st/comn]:

  Target system Instance home directory [/ data/appl_top/inst]:

  Target system service root [activated]:

  Target Web Entry Point [active] System Services:

  Target [active] System Web Application Services:

  Target [active] Batch Processing Services system:

  Other Services target system [off]:

  You want to preserve the display [oracleupk:0.0] (y/n)? : n

  Target display system [oracleupk:0.0]: oracleupk:1.0

  System Target Pool [0-99] port: 80

  Audit of the pool of port 80

  fact: Port 80 pool is free

  Report file is located at /data/appl_top/inst/apps/TEST_oracleupk/admin/out/portpool.lst

  Information available at /data/appl_top/inst/apps/TEST_oracleupk/admin/out/portpool.lst complete port

  RC-40201: unable to connect to the TEST database.

  Create the new file APPL_TOP context of:

  /Data/APPL_TOP/apps/apps_st/appl/ad/12.0.0/admin/template/adxmlctx.tmp

  The new context APPL_TOP file was created:

  / Data/APPL_TOP/inst/Apps/TEST_oracleupk/Appl/admin/TEST_oracleupk. XML

  Logfile located at /data/appl_top/apps/apps_st/comn/clone/bin/CloneContext_0912145803.log

  Check the context Clone logfile /data/appl_top/apps/apps_st/comn/clone/bin/CloneContext_0912145803.log for more details.

  Clone of fast running with the command:

  Perl java /data/appl_top/apps/apps_st/comn/clone/bin/adclone.pl = / data/appl_top/apps/apps_st/comn/clone/bin /... /JRE mode = apply dialing = / data/appl_top/apps/apps_st/comn/clone point = appsTier = CUSTOM appctxtg=/data/appl_top/inst/apps/TEST_oracleupk/appl/admin/TEST_oracleupk.xml contextValidated = true showProgress method

  Running:

  Perl java /data/appl_top/apps/apps_st/comn/clone/bin/adclone.pl = / data/appl_top/apps/apps_st/comn/clone/bin /... /JRE mode = apply dialing = / data/appl_top/apps/apps_st/comn/clone point = appsTier = CUSTOM appctxtg=/data/appl_top/inst/apps/TEST_oracleupk/appl/admin/TEST_oracleupk.xml contextValidated = true showProgress method

  Apps for password:

  Start application layer apply - Fri Oct 12 15:01:20 2013

  / données/appl_top/apps/apps_st/comn/clone/bin /... /jre/bin/java -Xmx600M -DCONTEXT_VALIDATED=true -Doracle.installer.oui_loc=/oui -classpath /data/appl_top/apps/apps_st/comn/clone/jlib/xmlparserv2.jar:/data/appl_top/apps/apps_st/comn/clone/jlib/ojdbc14.jar:/data/appl_top/apps/apps_st/comn/clone/jlib/java:/data/appl_top/apps/apps_st/comn/clone/jlib/oui/OraInstaller.jar:/data/appl_top/apps/apps_st/comn/clone/jlib/oui/ewt3.jar:/data/appl_top/apps/apps_st/comn/clone/ jlib/Oui/share.jar:/data/appl_top/apps/apps_st/ Comn/clone/jlib/Oui/srvm.jar:/Data/APPL_TOP/Apps/apps_st/COMN/clone/jlib/ojmisc.jar oracle.apps.ad.clone.ApplyAppsTier EI /data/appl_top/inst/apps/TEST_oracleupk/appl/admin/TEST_oracleupk.xml-/data/appl_top/apps/apps_st/comn/clone - scene showProgress

  Password APPS: log file located at /data/appl_top/inst/apps/TEST_oracleupk/admin/log/ApplyAppsTier_09121501.log

  -79% completed

  ERROR when executing apply...

  Fri Oct 12 15:07:47 2013

  ERROR: Cannot run /data/appl_top/apps/apps_st/comn/clone/bin/adclone.pl

  Contents of the log file: -.

  [AutoConfig error report]

  The following report lists the errors autoconfig met in each

  execution phase.  Errors are grouped by directory and by phase.

  The format of the report is:

  < file name > < phase > < eventually return code >

  [INSTALLATION STAGE]

  AutoConfig could not successfully run the following scripts:

  Directory: / data/appl_top/inst/apps/TEST_oracleupk/admin/install

  adgendbc.sh INSTE8_SETUP 1

  afcpnode.sh INSTE8_SETUP 1

  afgcsreg.sh INSTE8_SETUP 1

  txkWfClone.sh INSTALL_SETUP 1

  [PROFILE PHASE]

  AutoConfig could not successfully run the following scripts:

  Directory: /data/appl_top/apps/tech_st/10.1.3/perl/bin/perl-je /data/appl_top/apps/tech_st/10.1.3/perl/lib/5.8.3-je /data/appl_top/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3-je /data/appl_top/apps/apps_st/appl/au/12.0.0/perl-je /data/appl_top/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi /data/appl_top/inst/apps/TEST_oracleupk/admin/scripts/adexecsql.pl sqlfile = / data/appl_top/inst/apps/TEST_ oracleupk/admin /. install

  afwebprf. SQL INSTE8_PRF 1

  amscmprf. SQL INSTE8_PRF 1

  amswebprf. SQL INSTE8_PRF 1

  bisadmprf. SQL INSTE8_PRF 1

  bisdblrp. SQL INSTE8_PRF 1

  clnadmprf. SQL INSTE8_PRF 1

  cncmprf. SQL INSTE8_PRF 1

  cseadmprf. SQL INSTE8_PRF 1

  csfadmprf. SQL INSTE8_PRF 1

  csiadmprf. SQL INSTE8_PRF 1

  eamadmprf. SQL INSTE8_PRF 1

  fteadmprf. SQL INSTE8_PRF 1

  ibywebprf. SQL INSTE8_PRF 1

  icxwebprf. SQL INSTE8_PRF 1

  oksfrmprf. SQL INSTE8_PRF 1

  wshadmprf. SQL INSTE8_PRF 1

  Directory: / data/appl_top/inst/apps/TEST_oracleupk/admin/install

  adadmprf.sh INSTE8_PRF 1

  admk80ln.sh INSTALL_PRF 1

  afadmprf.sh INSTE8_PRF 1

  afcpctx.sh INSTE8_PRF 1

  	afcpgsm.sh	INSTE8_PRF	1
  	igccmprf.sh	INSTE8_PRF	1
  	jtfictx.sh	INSTE8_PRF	1
  	okladmprf.sh	INSTE8_PRF	1
  	txkJavaMailerCfg.sh	INSTE8_PRF	1
  	txkWebServicescfg.sh	INSTE8_PRF	1

  [APPLY PHASE]

  AutoConfig could not successfully run the following scripts:

  	Directory: /data/appl_top/apps/tech_st/10.1.3/perl/bin/perl-je /data/appl_top/apps/tech_st/10.1.3/perl/lib/5.8.3-je /data/appl_top/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3-je /data/appl_top/apps/apps_st/appl/au/12.0.0/perl-je /data/appl_top/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi/data/appl_top/inst/apps/TEST_oracleupk/admin/install
  	adadmat.pl	INSTE8_APPLY	1

  Fate of 31 stateful auto-configuration

  RC-50014: Fatal: failed to run the auto configuration service

  Asked by oracle.apps.ad.clone.ApplyApplTop

  ERROR: AutoConfig completed with errors. Check the logfile at /data/appl_top/inst/apps/TEST_oracleupk/admin/log/ApplyAppsTier_09121501.log for more details.

  ApplyApplTop completed successfully.

  # Check the race situation AutoConfig of ApplyApplTop

  WARNING: The autoconfiguration service has completed with errors.

  Please help me solve this problem, your prompt response will be highly appreciated.

  -Thank you

  Ankur

  Audit of the pool of port 70

  fact: Port pool 70 is free

  You used port 70 for the node of the database layer, so you will need to use the same port pool (70 instead of 80) when running "perl adcfgclone.pl appsTier.

  Thank you

  Hussein

• In total, I connect app... When I try to open the camera with quick time just, it is there and goes to white screen

  In total, I connect app... When I try to open the camera with quick time just, it is there and goes to white screen

  Hello

  You can check the link, download the manual to link Total perform operations.
  http://www.centralillinoissecurity.com/resources/documents/TC1.PDF
  You can also check out the Apple support link and view the query.
  http://www.Apple.com/support/QuickTime/

• BB10 and BBM connected Apps questions

  1 when he invites to the connected app BBM I can fill in the fields and click on invite-nothing happens

  where did - inviting directly from surveys BBM works instantly.

  2. on the page / screen with the bar scanner/updates / apps - connected app is here. What is a clickable link?

  3 NFC - tap to invite to BBM does not connect?

  These issues are related?

  @MSohm

  Alrighty then.

• Is it possible to open 'manage connections' app?

  Hi guys,.

  Is it possible to open 'manage connections' app?

  My application needs WLAN. So when it starts, I check if wifi is on and if it is connected to the network. If it isn't I would open "manage connections" and allow the user to connect. Is this possible?

  I was looking at the ApplicationManager class but did not understand if it is possible.

  Thanks for the replies

  I got an answer on another forum. It might be useful for someone. The solution is

  try {
           ApplicationManager.getApplicationManager().launch("net_rim_bb_manage_connections");
      } catch (ApplicationManagerException e) {
           // TODO Auto-generated catch block
           e.printStackTrace();
      }
  

• I upgraded to win 10 now creative cloud is a blank page and apps are tests of ideas until I cancel

  I upgraded to win 10 now creative cloud is a blank page and apps are tests of ideas until I cancel

  Hello

  For the white cloud screen creative,.

  Reference:--

  :New Creative Cloud application unusable: it is empty!

  and also try:-screen black at sign - in | Creative Office Cloud app

  For the trial;

  First of all, disconnect, then back into creative cloud, using adobe id to pay for your subscription.

  https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  Then, if you launch any product of CC 2015 and the pop up still shows a trial message window, please check this link for the resolution:

  https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

• I have paid, downloaded CC but when I try to download any application log in the box appears, I connect but he immediately returned to the top with "you have been disconnected. I'll just round and round. Someone at - it ideas?

  I have paid, downloaded CC but when I try to download any application log in the box appears, I connect but he immediately returned to the top with "you have been disconnected. I'll just round and round. Someone at - it ideas?

  Hi Steven,

  Please check the contents of the link below and follow the steps mentioned in it to resolve the problem you are experiencing:

  https://helpx-internal.Corp.Adobe.com/content/help/en/creative-cloud/KB/unable-login-creat ive-cloud - 248.html

  Please let me know if this helped.

  -Harsha.

• Cloud creative connection app?

  News on the creative Cloud connection app? When he's ready for us to download? I think that would greatly increase the usability of the CC

  Updated - connecting creative cloud is now on:

  http://blogs.Adobe.com/creativecloud/creative-cloud-connection/

• After you recreate a link to my internal connection APPS error

  Hello
  
  Is it someone knows about it
  
  After I've reprinted under our ERP Production adadmin
  then I restart applications
  I tried to connect, but it takes time to show the connection
  supposed to be the login, but it was an internal error
  
  then I tried to start the receiver
  
  and here is the result
  
  LSNRCTL > start PROD
  From /u/oracle/PROD/apps/tech_st/10.1.2/bin/tnslsnr: Please wait...
  
  TNSLSNR for Linux: Version 10.1.0.5.0 - Production
  System settings file is /u/oracle/PROD/inst/apps/PROD_tailinapps/ora/10.1.2/network/admin/listener.ora
  Log messages written to /u/oracle/PROD/apps/tech_st/10.1.2/network/log/prod.log
  AMT-01151: lack of name of the listener, PROD, listener. ORA
  
  Listening port could start. See the above error messages...
  
  LSNRCTL >
  
  Help, please
  
  
  Thank you

  cheesewizz wrote:
  Hi Hussein

  I think that I made a mistake
  Im running the listener in level APPS, it should be on DB

  I can now able to connect to our ERP

  Thank you

  In this case, log in as the user oracle and source, the env database file can deliver "lsnrctl" followed by "start PROD".

  Thank you
  Hussein

• Diagnostic test returns with this error: 1000-0146.

  Original title: 1000-0146

  ran diagnostic test and error code from 1000-0146 everything works ok

  Why do you think that will help a clean boot?

  It is a pre-boot diagnostic assessment Dell computer error code you can read here:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&docid=266787&doclang=en&l=en&s=Gen&cs=

  I think it means that the hard drive may be failing.  How will a start clean and check correct this?

  It seems that these companies will show anything to get a link to an article here somehow - even if it makes no sense.

  If forums MS Answers would invite some information about the system, when a new question is asked, maybe... just maybe we would not have these answers.

• Why am I getting the server error 901 connection in my new hp and no connection apps?

  IM getting very crazy, my first time buying a brand HP and IM already tired.

  Printer just does not connect itself to the applications and keeps showing the messages of impossible to connect to the server or connection server 1 error or error 901...

  Any help on the photosmart 5512

  Hello

  Follow these steps to reset the default settings of the network

  1. Press the Setup button
  2. Scroll to the Menu wireless
  3. Scroll to the restoration of network
  4. Run the Wireless Setup Wizard to reconnect to your network printing
  5. Tap the ePrint on the upper left of the screen
  6. Follow the instructions to install ePrint

  Let me know if you could successfully install ePrint?

• Launch of QObject::connect() app causing crash

  Hello

  I am trying to learn a few tricks of Cascades SIGNAL and SLOT and want to write a custom slot that sets the value of a slider when you press an ImageView. However, when I include the code of the connect() function in my application, it compiles well but the app crashes during launch of "BlackBerry 10" screen

  Here is my code:

   // Create the slider
      Slider* opacitySlider = Slider::create().leftMargin(20.0f).rightMargin(20.0f);
      opacitySlider->setLayoutProperties(StackLayoutProperties::create().spaceQuota(1.0f));
      opacitySlider->setHorizontalAlignment(HorizontalAlignment::Fill);
  
      // Create the moon icon
      ImageView* moon = ImageView::create("asset:///images/moon.png");
      moon->setVerticalAlignment(VerticalAlignment::Center);
  

  My connection code is here. Note When I connect, Q_ASSERT, put in comment and Q_UNUSED lines, the code works fine:

      bool result2 = connect(moon, SIGNAL(onTouch(bb::cascades::TouchEvent *event)), this, SLOT(zeroOutSlider(bb::cascades::TouchEvent *event)));
      Q_ASSERT(result2);
      Q_UNUSED(result2);
  

  My location is defined as:

  void ApplicationUI::zeroOutSlider(bb::cascades::TouchEvent *event){
  
      if(event->isUp()){
          // Error: opacitySlider is not declared in this scope.
          //opacitySlider->setValue(0.0f);
      }
  
  }
  

  Note that I also comment little opacitySlider-> setValue() which is not recognized and raises a compile error.

  I tried using QML and it works fine, but I want to use custom for more elaborate things C++ functions (tried to use this Guide). Thought that I would start to base, but it does not work.

  Any help is appreciated

  Hello! It seems that the app is not crashing, but stops at Q_ASSERT because connect() fails and returns false. If the logs are configured correctly, you should see an error message as well.

  The signal is called 'touch', not of onTouch. 'on' prefix is added to the managers of signals QML. Thus, the correct signal statement is:

  SIGNAL (touch (bb::cascades:TouchEvent *))

  Parameter names must be omitted in SIGNAL() and SLOT().

  To resolve this problem:

  // Error: opacitySlider is not declared in this scope.
          //opacitySlider->setValue(0.0f);
  

  opacitySlider can be declared as a member variable (in the header file). It will be accessible to all functions of the class.

• Cannot connect apps

  I want to convert an android project using the eclipse plugin, the bar is created, but it will not be accepted in the app world

  I verify the signature:

  ./blackberry-signer -verify /myapp.bar
  Error: Bar is not RDK signed
  Error: Bar is not AUTHOR signed
  Error: This bar contains unsigned entries which have not been integrity-checked.
  

  If I sign it again!

  ./blackberry-signer -storepass mypass /myapp.bar
  Error: Code signing request failed because this file has been previously signed.
  

  What can I do?

  Set to day of ADT & eclipse and finally I signed the app!

  It was also useful http://supportforums.blackberry.com/t5/Testing-and-Deployment/Code-signing-request-failed-because-th...