RX100 ii y at - it a setting to prevent the shutter to operate when there is no SD card in camera?

Similar Questions

• Is there a setting to have the message to users when a technical object is already open for editing?

  We are on v6111 and enjoy the warning message that informs the user of the second when two users have edited the same technical object and changes of the first has already been saved.  What we are facing is users who want to know that someone else has already opened the technical subject to change.  Is there a configation for this?  Users do not like to be informed after they enter data that someone else already saved a different edition... they would like the warning before doing the real work because it feels like a wasted effort... If the accused in advance, they can come back and do the data entry later.  We try to find the appropriate configuration option to set the warning message in the appropriate UX process / calendar.  Thank you!

  OK Ron, we will get the UX/ER process began with the OS.  Thank you.

• Error setting DAC preventing the task to run

  Hi all
  
  Please see below this error that prevents a SIL of running, I've never seen this one before, don't know if it is a mistake to config or stripped / related environment.
  I'm particularly intrigued by the name of the file is repeated three times?
  
  It is the last task in a small batch of custom work, all the others have come OK.
  
  Error message: user error. You spent pmcmd wrong settings.
  Opportunity to order: pmcmd startworkflow sv - BIA_IS_DEV01 d domain_udapbia3 u Administrator Pei * f Custom_SILOS - lpf u01/oracle/biapps/dac/Informatica/parameters/DataWarehouse.DataWarehouse.Custom_SILOS. Custom_SIL_ InboundCalls.txt Custom_SIL_ InboundCalls.txt Custom_SIL_ InboundCalls.txt
  
  
  Thank you
  Ed

  In the workflow name command followed pmcmd of the settings file.
  Just in case where to check the configuration of the task in CAD.
  There might be a chance to copy twice for the order of the task, such as "Custom_SIL_ InboundCalls.txt" and repeats and is the most important check your task or workflow name with name space after SIL_

  If the above are correct and then try this

  Replace - lpf - paramfile in the infa_command.xml file and try to run the load
  For more details, read the comments of the file file.
  You can find the file location orahome\10gR3_1\bifoundation\dac\conf\infa_command.xml

  or
  http://docs.Oracle.com/CD/E15586_01/fusionapps.1111/e14849/app_troubleshoot.htm#BCEGDDIB

  If help pls mark another update

• I have an iphone 6 it is damaged by water but I set myself and the person put it on charge and tested it with a multimeter and it worked perfectly but when I went to look for a screen tested on it, it didn't work

  I have an iphone 6 it is damaged by water but I set myself and the person put it on charge and tested it with a multimeter and it worked perfectly but when I went to get a screen tested on it because she does not have the person had not on is it did not work, even if the person has used only flow to correct and get a few corosions out with the replacement of some components of the person responsible for 10 minutes after having plugged in and the battery it wamer so it as I said her test with a multi meter test and he registered 12v and I wondered if something was wrong with it and if I could fix it easily?

  Check the liquid Indcator of Contact.

  Instructions here > liquid for iPhone or iPod is not covered by the warranty - Apple support

  Just so you know, the service of the liquid damage to an iPhone or iPod is not covered by the limited warranty of one Apple or an AppleCare Protection Plan (APP).

• Basic and stupid, but frustrating: how to set top/receive the sound of Focusrite Scarlett 2i2 in logic?

  Sorry to ask, I feel super stupid especially because I just took a record class this semester, but it's still where I got stuck for awhile it too: I so Scarlett 2i2 all set up and plugged into the port USB drive on my MacPro, with cables (1) (2) an electric guitar and a microphone , and light and everything seems to be connected correctly, but I can never understand what to do once I open the "empty project" in Logic Pro X, i.e. the Audio input > then what? I tried a number of combinations (entry 1, entry 2, entry 1 + 2) with two tracks and at times different logic seems to capture sound from either the microphone or guitar, but never both at the same time, and when I try to register, I get nothing. I know the 2i2 back sound, but I don't know how to get it in logic too - I am missing as a headphone set big enough to fit into 2i2 currently taking, then maybe this is part of the problem? Perhaps? I have no idea. Advice or simple suggestions are appreciated!

  In the logic->-> audio Preferences that you have set up your input device to be the Scarlet?

  Next, create two strips of channels (Audio)

  Press x to open mixer and set strips in mono channel by clicking on the two circles - a circle is mono.

  and on the entrance to the channel bandwidth select input 1 and input 2 for the other...

• Is there a configuration parameter that can be set so that the various web pages can NOT disable the ability for the latest data from the Clipboard in a field instead of typing

  Occasionally various websites have forms to fill out. Frequently, the password field and the ability to paste from the Clipboard is disabled. Since I use a password manager and generate passwords as mN0ZJ1Pj (generated example for display) she would like to be able to paste the password because there is less tendency for me for spelling errors.

  I would like to know if there is a configuration setting that causes the instructions on the web site to disable the ability to stick to be ignored. My position is that it's MY computer and I should be able to do what I want on my end.

  Thank you.

  Fred

  Go to the Mozilla Add-ons Web Page. There is an add-on called RightToClick. Look around. There are a lot of good stuff here.

• In FireFox 13.0.1 I can't open view in Google Maps. I get a blank page. I have two users set up on the computer, (WIn 7) and the second works OK

  Some other videos also will not work. I tried to run in safe mode, but that did not help. I had to use google chrome to see images.

  It started when my wife logged and a message "the user profile service has no logon. Unable to load the user profile.
  When I went in Firefox did not display most of the images such as YouTube. I failed in trying to set up a new user for my wife I did a system restore to several days earlier. It seemed to work, and in fact, Firefox seems to be OK. Then I updated plugins and when I returned to Firefox I can play Youtube videos but not others such as the Google Street View.

  All ideas

  Thanks for the help. I uninstalled Flash 11.3 and installed Flash 10.3. Everything works fine now.

• in the menu toolbar customization, ALL the small icons in the last set (home, reload the page, stop downloadig page, etc.) are dishes on MISSING. What can I do?

  in the menu toolbar customization, ALL the small icons in the last set (home, reload the page, page download stop, etc.) are dishes on MISSING, and therefore I can not add the Firefox.What can I do?

  These buttons are not in the drop-down to 'Add' Palette, they are on the Navigation toolbar and must be "moved".
  The buttons Stop and reload should appear between the address bar and the search bar when customize is open, and the home button should appear to the right of the search bar.

• iPad is set to optimize the storage of photos from device. App Photoshop Express will edit the reduced size copy stored on the device, or automatically process the iCloud kept a life-size?

  Can someone advise please?  I copy all my photos from SD card in my iPad and the use of the Photoshop Express application to modify.  iPad is set to optimize the storage of photos from device. Edit app Photoshop Express small size kept on the device, copy or automatically will process the iCloud a life-size?

  I guess you'll have to manually lower the file full resolution first. I would ' t think that any application would just go and take it automatically from the Cloud. You may need to check if you have not already.

  

• Optimal, set up for the airport and the power network line?

  Hoping to any network gurus can advise on the optimal configuration for my network.  Current configuration is as follows.  1 Zyxel DSL modem configured to act as the router, PPPoE (not the bridge mode) mode, which is the default value.  2. Airport Time Capsule (ATC) connected to the modem via an ethernet cable plugged into the WAN ATC port.  ATC configured in Bridge mode.  Adapter network line connected to the LAN of the ATC port.  2nd line network adapter is connected to the opposite end of the House where the Time Capsule wireless signal is weak to non-existent.  Airport Express (AE) plugged into 2nd network adapter line.  I have a lot of devices (computers, printers, cell phones, DVR, etc.) which must connect wirelessly to the network.  Here are my questions:

  1. is it better to act as the router, rather than on the bridge, as I have to reconfigure the modem in Bridge mode and the most convenient way to connect using PPPoE Airport Airport?  Or is it not important?

  2. my hope is that by using the network adapters and the AE in the part of my house with the worst WiFi signal, I can push the range of my network and all devices to give a good signal.  My hope is that the devices will be connected to any signal is stronger.  At present, ATC and EI do not have the same network name (or password).  It is better for them to broadcast 2 differently named networks, or both would be they networks of broadcast with the same name and password.  Or is it not important?  Is how important it that the ATC is able 802.11ac, EI is just 802.11n?  For reasons not clear to me, even though I have several 802.11ac devices (MacBook Pro and Nexus5x), they are on the 2.4 ghz band (I even if ca is the 5 ghz).  Don't know if something is set up wrong on my ATC.

  All the equipment is running the latest version of the software (OS X, iOS, Android, etc.).

  Thanks for any advice.

  1. is it better to act as the router, rather than on the bridge, as I have to reconfigure the modem in Bridge mode and the most convenient way to connect using PPPoE Airport Airport?  Or is it not important?

  Doesn't matter, unless there is a special feature like the network option of comments on the airport... that would require that the airport be configured as router.  Airports are not known for their reliability, PPPoE, so it is best to have the modem or modem/router to provide the credentials of the PPPoE connection.

  2. my hope is that by using the network adapters and the AE in the part of my house with the worst WiFi signal, I can push the range of my network and all devices to give a good signal.  My hope is that the devices will be connected to any signal is stronger.

  If the two access points use the same wireless network name and password, Mac will do a nice job of automatically move from one access point to another to pick up the best quality signal as they move home... but iPhones, iPads, and most of the PC will not.  If you name the two networks as well, so you will need to get used to temporarily disable WiFi on iPhone, iPad, etc. When you move from one region to the other. Then, when the device is in the new location, turn on the WiFi and the device usually pick the strongest signal from the nearest access point.

  If you use names of separate network for access points, you need to manually switch networks on each device whenever the camera moves from one region to the other.

  Is how important it that the ATC is able 802.11ac, EI is just 802.11n?

  Well, you know that the Express is not "ac" capable, so any device "ac" close the Express will connect at low speed "n".  You will probably not notice a difference in respect if your Internet speed is less the Express features.  If you copy large files from one computer to another or backup on the network, then a device that connects to the Express is going to be slower than a device capable of "ac" that connects to the ATC.

  For reasons not clear to me, even though I have several 802.11ac devices (MacBook Pro and Nexus5x), they are on the 2.4 ghz band (I even if ca is the 5 ghz)

  Everything in the wireless is a compromise. In other words, to get something, you must give up another.  "ca" is used to that in the band 5 GHz, so if your devices are connect 2.4 GHz, they connect to a slower 2.4 GHz signal.

  Here is the compromise...

  5 GHz signals have capacities of speed much higher than the 2.4 GHz signals... BUT... 5 GHz signals are significantly weaker than the 2.4 GHz signals. So you're really not going to get the benefit of 5 GHz, if your device "ac" is in the same room or it has line-of-sight with the router "ac".

  If a device of "ac" is a room or two away from the router "ac"... the device will probably connect 2.4 GHz... because these signals are more powerful penetration of walls and other obstacles a lot better than 5 GHz can never hope.  It is also possible that the 2.4 GHz signal several rooms away the router will also be the fastest signal at this location, because the signal slows down more it moves the router.  5 GHz quickly signals really slow down.

• Cyber-shot HX20/HX30V - the shutter speed setting

  I am unable to what anyone slower 1/4 second value my shutter speed (in manual mode). I should be able to reach a speed as slow as 30 seconds.

  I can adjust the ISO setting (currently fixed at 100) and I can set the aperture and I can set the shutter speed to the faster speeds of up to 1/1600 of a second - setting a slower speed that 1/4 of a second escapes me.

  Any ideas?

  Hey, you forget.

  I did a complete reset and now it works as advertised.

• Setting position of the dialog box

  I'll call the dialog function a simple button on the palette of the dialog box.  When running, the dialog box always appears in the center of the VI window, regardless of where the VI window.  The dialog box covers indicatorsthat, the user should see.

  Other that to move the indicators on the front panel, is there something that can be done to move the dialog box to be perhaps outside the front window?  I see no setting for a position of dialog.

  I know that I can always create a Subvi as a dialog box and define the position of the window, but I was wondering if the primitive location of Labview could be changed.

  What I did when I ran across something like this, it is to carry the message to display to the express VI user and right-click and select everything that the option is called to make a normal VI. Then you can dig in and copy the source code or save as and make a copy of change needed. In this way, you keep all the existing resize based on the input text if a message is displayed, etc.. I think that this VI dressed just the primitive dialogues, if you have a lot more flexibility

• How to set the timeout of read when using channelReader.ReadWaveform?

  I'm using a USB-6210/a. data acquisition, and it works fine until I have to take a longer than 10 s waveform.

  When I take a longer than wave form, I get the error 200284, "some or all of the requested samples are not yet acquired.  To wait for the samples become available use longer read timeout... »

  No problem, I thought, I'll just put a longer period.  I searched through the documentation, and the timeout only I found was the watchdog timeout.  When I wanted a longer value, I get code 200452 State - specific property is not supported by the device or is not applicable to the task.

  I use the code in the example AcqVoltageSamples_IntClk.2008 .net with c# in Visual Studio 2008, .net 3.5 sp1.

  How to set the timeout so that ReadWaveform() is not the time?

  Here is the code:

  privateAnalogMultiChannelReaderchannelReader;

  privateAnalogWaveform awf;

  publicList GetWaveForm()

  {

  Try

  {

  Task getWaveform = newTask();

  getWaveform.AIChannels.CreateVoltageChannel (Channel,"", TerminalConfiguration, RangeMinimum,

  RangeMaximum, AIVoltageUnits.Volts);

  getWaveform.Timing.ConfigureSampleClock ("", SampleRate, SampleClockActiveEdge.Rising,)

  SampleQuantityMode.FiniteSamples, NumSamples);

  getWaveform.Control (TaskAction.Verify);

  channelReader = new AnalogMultiChannelReader (getWaveform.Stream);

  AnalogWaveformdata = channelReader.ReadWaveform (NumSamples);

  AWF = data [0];

  samples As new List();

  for (inti = 0; i)

  returnsamples;

  }

  catch (DaqExceptionexception)

  {

  MessageBox.Show (exception. (Message);

  }

  List of l = newList();

  return l;

  }

  Thank you

  Curt

  Hi Curt,.

  Here is a Knowledge Base that can help you to set the timeout setting in your code:

  The property using Timeout of DAQmx task in Visual Studio

• How to configure a security setting to prevent anyone from being able to access my computer?

  If possible, I would like to set up a security code to prevent anyone being able to use my computer.

  Hello

  1. is the computer connected to the domain network?

  2. what operating system is installed on the computer?

  Method 1:

  In case you are connected to the network and that you use Windows 7, then you can check the link below to secure your network.

  Make your network more secure

  http://Windows.Microsoft.com/en-us/Windows7/making-your-network-more-secure

  Method 2:

  If the computer is not connected to the network and you want to protect your computer against misuse then you can set password for the user profile.

  See the link below for more information.

  Protect your computer with a password

  http://Windows.Microsoft.com/en-us/Windows7/protect-your-computer-with-a-password

  (The article applies to the Windows 7 operating system)

• How to set up to the pop-up window of the VI?

  I want to install the main program with ON and OFF buttons.

  When I click on IT, it will go to the REAL deal and popup the VI 'YOUR '. When I did with 'YOUR' VI, it will close the program.

  I tried to use the new event handler, but I have all the data entry because the 'YOUR' VI is VI independence.

  Another way? Please advice.

  Thank you

  

  A way to make a sub VI appear as a popup is to go to the VI properties for the desired sub VI, select the appearance of the window from the drop-down list, select Customize, and then check both "Show Front Panel when it is called ' and 'close later while initially closed. You can also set other properties of the VI from here, which is useful for the screws that intneded to be pop-up windows and dialog boxes.

  -RW