Is there a setting to have the message to users when a technical object is already open for editing?

Similar Questions

• My files open to 176% zoom, is there any setting to reduce the size when opening files?

  My files open to 176% zoom, is there any setting to reduce the size, so I do not reduce to 100% every time?

  If you are the author of the files, then you have the option to set the tab view initial magnification settings in the properties of the Document.

  

• Motorola Defy - is there a way to track the message to Defy (MB525)

  Motorola Defy - is there a way to track the message to Defy (MB525)

  You're in the wrong community, it's the Droid community. I will try to answer the question, though. Try the long type the message and a menu dropdown should appear before being one of the options. I hope this helps.

• The message I get is Microsoft word has not been installed for the current user. Please run set up to install the application. I reinstalled the software, but get the same message.

  The message I get is Microsoft word has not been installed for the current user.   Please run set up to install the application.   I reinstalled the software, but get the same message.

  Hello
  
  See the methods listed in the articles below and check.
  You receive an error "Microsoft has not been installed for the current user" message when you try to start an Office 2003 program or an Office XP program for the first time
  http://support.Microsoft.com/kb/898512
   
  You receive a message "Microsoft has not been installed for the current user" when you start an Office XP program or start of Microsoft Office Maintenance mode
  http://support.Microsoft.com/kb/298022
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Loop Finder crash after upgrading to El Capitan.  'Finder close unexpectedly when you use the plug-in finder' - the message really is in Norwegian, so it may be different for the English operating system.

  'Finder close unexpectedly when you use the plug-in finder' - the message really is in Norwegian, so it may be different for the English.  The e is a compatibility issue with dropbox or Google drive in El Capitan?  Those are the plug-ins only that I could find.  Thank you very much.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• C:\windows\ayofeworit.dll the specific module could not be found, the message pops up when loading office

  C:\windows\ayofeworit.dll the specific module could not be found, the message pops up when loading office

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you can't find a good explanation for the name of the file in a Google search, re chances while your system is currently or has been infected with malicious software.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.

  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• ERROR: You don't have the right of user manage auditing.

  I copied the files on my computer to work on a USB device using robocopy. When I try to use robocopy to copy these files the USB device on my computer at home I get the following error message; "ERROR: you do not have the right of user manage audit."

  How can I get this error message and copy the files?
  Thank you

  I'm glad that you were able to understand. Thanks for sharing your solution. In Windows Vista and Windows 7, even if your user account is an administrator (and this is not optimal, see why below), you still need to raise the true administrator to make global changes. In your case, that would by running high cmd ("run as Administrator").

  User - recommended configuration (Vista and Win7) accounts

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista and Windows 7 are OS multi-user with system built-in accounts such as administrator, by default, all users and guest. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want account only one user with administrator privileges on Vista and Windows 7 because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it will take third-party tools and work outside the operating system.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null). MS - MVP - Elephant Boy computers - don't panic!

• This is the message I get when I try to install the latest version of DPS App Builder "application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file.

  This is the message I get when I try to install the latest version of DPS App Builder "application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file. On my Mac.

  
  

  I tried to uninstall and reinstall

  
  

  Help, please!
  

  What version of Mac OS do you have? I guess it's 10.6.8 which is not supported by the App Builder. You need to update to a newer version of Mac OS.

  Neil

• Customize the message "welcome, < user >."

  Hello
  
  When connect us to Obiee, we get the message "welcome, < user >."
  We need this to show as < user > on < variable position > customize.
  Could someone let me know how to do it.
  
  Thank you

  The 'Welcome' message comes from the XML message, uimessages.xml which allows only one parameter insert which is coded for the session display name variable. There is usually an init block in the RPD which defines the full name. OOTB is the init block "properties of the CONNECTION. You can try changing this init block SQL code so that the display name includes extended information you want to display. Of course, if the full name is used everywhere else then it will also include extended information.

• I have the creative cloud, but when I put my last project on it said it wasn't updated... is not automatically updated cloud? kinda the entire point?

  I have the creative cloud, but when I put my last project on it said it wasn't updated... is not automatically updated cloud? kinda the entire point?

  you have disabled the auto-update feature.

  Click the gear on your desktop app > preferences > make sure that ~ "always keep updated cc" is checked.

• This is the message I get when I try to print from my pro 1 when I go to plug in extras, I tried to import and add another plugin, but no success/Library/Caches/Canon/PrintStudioPro/PrintStudioPro_LR_TEMP

  This is the message I get when I try to print from my pro 1 when I go to plug in extras, I tried to import and add another plugin, but no success/Library/Caches/Canon/PrintStudioPro/PrintStudioPro_LR_TEMP

  Hi Nathalie-B,

  Greetings!

  Go to the/Library/Caches/Canon, and remove the inner content.

  Also, be sure to empty the trash after that.

  Then try again.

  Concerning

  Jitendra

• I tried in several ways (in line, calls and return on this forum), but no aid has been granted on Edge inspect.  I get the message "your user name and password are incorrect, or your account has no access onboard inspect CC.  Any assistance

  I tried in several ways (in line, calls and return on this forum), but no aid has been granted on Edge inspect.  I get the message "your user name and password are incorrect, or your account has no access onboard inspect CC.  Any help is greatly appreciated.  One of my original case numbers were: 0216572509

  You need installed Adobe Creative Cloud. Check the link for more information below.

  Edge inspect FAQ EAC

• Who can I show message to user when it closes my request?

  Hi all;

  Please tell me

  Who can I show message to user when it closes my request?

  Thank you

  This is probably what you are looking for. This is impossible with the code in the handler of exit() signal since at this time the scene of the UI is already stopped, and everything you try to send to the screen will be lost.

  haf - med wrote:
  Hello
  Thanks for your help, but I need a method that when used to complete my request I show him a message with 2-button 'ok' and 'Cancel' if it click 'ok', the firm application and it click on 'Cancel' the application thus identified.
  Please give me a sample code in qml if possible.
  And thanks in advance.

• In the Pages, when I quand je selectionne selects open for a list of my files, all I get is an abbreviated list of a few files.  That's happened?

  In the Pages, when I quand je selectionne selects open for a list of my files, I get nothing more than a brief list files, more than other things.  What happened and how do I get my list?

  When you choose open, it will open the finder and you will find your way to all the files.

• I tried to install Illustrator several times. He finished the installation, and then when I click on it to open it it says error: 16

  I tried to install Illustrator several times. He finished the installation, and then when I click on it to open it it says error: 16

  Error 16 http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html

  -including DW039, https://forums.adobe.com/thread/1500609