SADiE Style feature "Underwear" for the Production of speech edition/Radio in hearing
Hi guys,.
This is my first post here - I had a search on the forum and could not find an answer to my question, so I thought I would start a thread. I produced radio programs in SADiE for years, but I'm getting a little tired of his quirks. It seems that the hearing could be a great alternative, but SADiE has a really crucial role that I'm not sure I could live without - sliding mounting.
When you turn on "the"slippage"in SADiE, then select a piece of audio on your timeline, all the audio data to the right of this piece becomes highlighted and slide as if you selected." It is a feature really useful when radio because it keeps the structure of your program and you don't have to use your mouse to select all audio whenever you want to drag a clip on your timeline autour without pulling your program to pieces and leaving large voids or accidentally push clips on top another etc.
The other function is very convenient, the offer sheet is that it can do everything audio to the right of your editing slide automatically over to the left when you remove a breath, a um or a few words in a piece of speech you want to delete. This means that you don't have not to select all the audio data to the right of your editing and then move to fill the space left by the breath/words you have edited out.
The crucial question - is offering a similar feature Adobe or a work around?
Advice you might have would be very much appreciated.
All the best,
Max
My orders more close equivalents in hearing would be the select all the Clips at the end of the runway and the ripple delete commands.
Select all of the Clips at the end of the track (Opt + Cmd + T, Ctrl + Alt + T) Selects all clips on a track in the cursor.
Ripple delete Deletes a time selection or the clips selected on a track or all tracks.
These commands are also available in the Edit > select or Clip > Ripple delete menus, or by clicking right in the editor Panel.
Edit:
You could also take advantage of groups of Clip to keep your changes, but move them as you wish. Ripple deleting will continue to function as expected with active groups, but you can quickly and easily hang a group or a single element to a group if you need to make some additional adjustments.
Tags: Audition
Similar Questions
-
I get a pop up saying error 1706 that valid no source is not found for the product my hub. Windows install cannot continue. Also "the feature you are trying to use is on a nework resourse which is not available."
Can someone tell me what to do and what is the problem
Thank you
Hi Traceyjane,
(1) when exactly it happens?
(2) do you use the computer as an administrator?
(3) what is the number of brand and model of your terminal?
If you try to install the software for your hub, make sure that you install the correct package for your computer.
Step 1: Try to install the program as administrator right click on the installation program files and select run as administrator , click continue if you are prompted to confirm.
Just check the items below that addresses a similar issue
The feature you are trying to use is on an unavailable network resource
http://support.Microsoft.com/kb/828376You receive an "error 1706. Valid any source not found for the product
http://support.Microsoft.com/kb/253768
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Canonical URL for the product?
What is the best way to manage the canonical URL for the products?
The easiest way would be to use a template to be applied to these pages, but what module/tags should I use for a template that renders the URL?
Thank you!
Lynda
Wait, as BC is working on the feature and hopefully coming out soon.
If you can't wait then use custom field and the canonical tag in the presentation of the great product and manually paste the url in the url you want as primary.
-
Help with settings in the capture of a 1968 for the Production of DVD movie
I have a problem with the Premier Pro and need help.
I'm on a date limit to change a feature film (01:27 long). It's a job home with, unfortunately, not a lot of knowledge on Premiere Pro. It must be sent in MPEG2-DVD (which I don't know how to do). My problem in the import of DV cassettes. I know how capture of the Sharp VL - AX1 I use to read the tapes. He appeared in Premiere Pro, etc.
My problem is with the settings. I set up the Premiere Pro with Standard DV NTSC 48 kHz, and then click capture. While the small screen on the Sharp VL - AX1 shows scenes with just a small black band (1/2 inch?) on the top and the bottom of the actual scene, the import/capture on the PC screen appears on a screen wide once he starts the capture and everything is elongated horizontally. I tried variations for the last month, but I'm stuck right here. The film was shot in 1968 and is wider; wide screen just not. When I try the implementation of big screen, the capture on the PC screen is just as broad if not broader.The film has been digitized from the original 35mm copy by a professional company in Texas. I'm just trying to correct some color problems and send it to them for the production of DVD. They use Avid, so they cannot make the same color of correction, etc., work I want to do.
I would like to import from DV tapes in the best possible quality, tweak it a bit and then export it to a (probably mpeg2-DVD) format, which they can use to make the additional editing (DVD menus, etc.) for the production.
Here is a picture of what appears on the screen of the Sharp VL - AX1
Here is a picture of what appears on the screen Capture in Premiere Pro (CS5)
For any help or suggestion will be appreciated. I have this project done Friday.George
The telecine like a 4:3 letterbox wasdone: that's why you see black bars in the capture window. However, the transfer to the band (or perhaps the capture of original sequences by the transfer device) has reported that 16:9; First recognizes that flag, and that is why the video is stretched in the capture window. Since it's DV, it is not really important. Just capture it as - is and then right click on the AVI file captured, select Modify > interpret footage and all the pixels to Conform to D1/DV NTSC format (. 9091). He will perform the 4:3 images, and the aspect ratio is correct. There will be bars from mailbox to mailbox, but those who are already in the images. You can get rid of them, but you'd have to blow up the images and lose resolution, then I'd say just leave as is.
Once you have done so, just drop it into a sequence of NTSC DV (not widescreen) and change there. From there, you can export some way that you see fit. MPEG-2 DVD is fine as long as the other company is just doing the DVD authoring, but if they do no editing more far, you probably want to just export to tape to maintain the highest quality.
-
activation key for the product during the victory 8.1 update
I use HP ENVY m6 recently the hard drive had crashed. so I ordered for a recovery of hp and I put it and win8 installed. When I switch to 8.1 it ask for the product key. It shows that "this product key isn't not work.you might need to contact the store or company, that you have purchased from windows or you can buy a new key from microsoft"
Hi @kalyanCN ,
Welcome to the HP Forums!
It is a wonderful place to find answers and ideas!
You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more
I understand that your hard drive has crashed and you have ordered a recovery kit. You did the recovery of Windows 8 and have now updated for Windows 8.1 but have a problem with activation. Here is a link to Activate Product Windows 8 to help you solve this problem.
If you still encounter a problem with the activation, I suggest that you contact HP support for help.
Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.
Good luck!
-
Why not is not updated working level of windows 7 Starter to home premium. I PAID for the product. Do the thing anytime upgrade and after a wait I am informed upgrade failed, what should I do?
Windows 7 Anytime Upgrade fails:
If your getting the following: error: Windows Anytime Upgrade failed
This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
See: http://support.microsoft.com/kb/2660811= Other reasons and possible corrections.
Windows Anytime Upgrade fails with the error:
"every time that the upgrade has failed. Go online to solve the problem.
http://support.Microsoft.com/kb/2658652If Anytime Upgrade still does not work:
Shut down and restart your computer.
Make sure that the Windows updates have been installed.
Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821
If Anytime Upgrade still does not work, turn off the user account control:
1. go in user accounts in Control Panel
2 change user account control settings
3. pull the slider to the level as low as possible
4. restart the PC
5. pass by the "Anytime Upgrade" as usual
Try the following:
1 disable any security software before attempting to upgrade
2. make sure that your computer is updated (devices and applications)
3. disconnect all external devices before installing.
4. check your hard disk for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
1. click on start, type msconfig in the search box and press ENTER.
User account control permission
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
Also run the Windows 7 Upgrade Advisor:
http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx
Who should I contact if I have problems installing and / or activation of my product key card?
Please contact to the: www.windows7.com/getkeysupport.
If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:
Learn how to install Windows 7 Service Pack 1 (SP1)
http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade -
walking from Vista to 7 system keeps asking for the product key
Related topics
-
I bought my program and I have the code for the product. Where I have to write this code?
Exactly, what program... and the version?
You have a number or a redemption code?
You enter a serial number when asked during the installation process
Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
-
new fake serial for the product key in order to activate the non-visible product
The starting point, it's that I want to install Acrobat 7.0 Standard (which, so far, works well in Win7 XP box) on my new Win10-Sytem.
Installing from the CD worked - and (surprise) it is works on Win 10!
But: I can not activate it with the original serial number.
So: earlier I had this discussion (which is now closed...):
I want to inform that the key to this series is for Acrobat 7 and Adobe no longer support this product so in order to help you I provided a link so please click on this link:Download Adobe Acrobat 7 and Adobe Creative Suite 2 products
Then sign in to your Adobe account, then you must select your product form there and also you will find the new dummy series for the product key in order to activate the product, please, do not use your product serial key
Well: the download of the installation file has worked, but I can't find the new dummy series for the product key in order to activate the product in my account. Again there is the OLD and no keys work.
So, please: where can I find the fake serial key?
You are welcome
-
I paid for the product, but it is still a demo! And I've paid twice!
I paid for the product, but it is still a demo! And I've paid twice!
[moderate]
-
Hi, I'm on a PC running windows 10. I just started using Lightroom CC and wildfire and feature drop for the sorting of the pictures in collections has stopped working. can someone suggest something please?
Your catalog backup and reset the preferences as mentioned wobertc
Press the shift and Option on Mac, or the shift and Alt PC (windows) keys. Select Reset preferences
~ Assani
-
My creative cloud subscription ran out. I've updated my contact information. Adobe is deducted from the money, but I can't find the serial number in my account for the product so can't get all running programs. I have the small card, but there are letters and numbers. Adobe doesn't let me put those in the fields of serial number. Is it possible I can get Adobe to help me because I'm paying for something that I can't use.
Hello
Please check the help below document:
Quickly find your serial number
In the case of the volume license product, please visit: site Web of Adobe License | Serial numbers | Orders | Accounts
Kind regards
Sheena
-
I downloaded and tried to install CS6 on my computer after that machine has been upgraded to Windows 10. I get a message that says "serial number is not for the product." The drop-down list does not contain CS6 Design and Web Premium. What should I do to get loaded and enabled on my computer?
That fall down, and the serial number you provide must identify the previous version that you upgraded because CS6 is an upgraded version in your case.
Error "this serial number is not for a product calling it" | CS6, CS5.5, CS5
http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-qualifying-product.html
-
I downloaded Lightroom 6 thanks to Amazon and never received an email from Adobe with the serial number, I need to finish my license/registration for the product...where/how can I get the serial number?
Hello dakineny,
Please refer to the link given to find your serial number: quickly find your serial number
It will be useful.
Concerning
Bianka Attre
-
I paid for the product, but I don't have a serial number
I paid for the product, but I don't have a serial number. What should I do?
Hi Lynnslf38,
Please see the help document following on "how to find the serial number of product purchased Adobe."
http://helpx.Adobe.com/x-productkb/global/find-serial-number.html
I hope this helps.
Please let me know if you have any other questions.
Kind regards
Sumit Singh
Maybe you are looking for
-
My devices receive a warning where do I contact Apple to take the virus off what do I do
I don't know what to do my mini iPad and iphone 5 c got the same messages where they. Say there's a virus and communicate with the company apple.
-
OfficeJet Pro 8620: HP OfficeJet Pro 8620 button walk / stop keep flashing
Condition: My Officejet Pro 8620 is about 1 1/2 years and all of a sudden it does not. (FYI: it worked again yesterday). My printer has been connected to 3 PCs in my house wireless, there is another printer (HP LaserJet Pro M401dw) in the same room c
-
The Windows API in LabWindows 9.0 documentation
I installed LabWindows/CVI 9.0 to ensure that the Windows SDK is enable. When I help/Win32 API, I get the following error message: "The Win32 API documentation has not been installed. You can install the documentation for "MSDN Library" DVD include
-
Hello I have a problem with my LabView and I'm out of ideas how to fix it. In 2002, I designed a software of data acquisition based on LabView 6.1 using a PCI-6034E. Since then, it worked fine. A few days ago, I had to change PC. I installed LabView
-
CLIQ locks whenever I plug in USB, but not the wall charger?
A few days ago only my CLIQ started crashing everytime I have connect my original OEM USB data cable. I hear the phone read the sound to be plugged in, but it seems to cut before the full "ding", the phone freezes for a few seconds and then restarts.