Safari: To view this page you need to register this domain on...

Similar Questions

• HOL INVITE a FRIEND - why you need to register to invite someone?

  HOL INVITE a FRIEND - why you need to register to invite someone?

  The Ohio Valley TAM group it was discussed in a thread and wondered why the HOL users INVITE FRIENDS without being registered for the laboratory. Is it not possible to activate INVITE YOUR FRIENDS to users who have not registered for the laboratory, because it makes it much easier to help others in need.

  Thoughts?

  The purpose of inviting a friend is someone to experience lab and then invite a friend to share this experience. In order to take a lab, you must be registered. Therefore, it logically follows that you must be registered in order to invite a friend to share the experience.

  I can imagine a situation, however, in which an admin of vSphere could see the lab NSX is available, for example and want access to its network admin to take this laboratory. Maybe it's an interesting development of the feature. Thanks for the comments.

  I hope that clears things up,

  Doug

• I was using safari on mac recently, but you need to download a file in Firefox. It downloaded fine and appears in the download list, but I can't seem to open or access. Don't know how I guess! Help much appreciated; )

  What should I do to open the downloaded file?
  It seems that the stuff downloaded via safari is in a single file and downloads via Firefox are in another.

  Troubleshooting extensions and themes

  • https://support.Mozilla.com/en-us/KB/troubleshooting%20extensions%20and%20themes

  Check and tell if you are able to download and open a file when you use the Mode without failure of Firefox.

• Problem with FLVPlayer in Flash CS3 (you need to register on Actionscript 3.0 SWf file)

  I use Flash CS3 and I'm trying to publish a SWF file that makes use of the "FLVPlayback" component I need this SWF file that will be published in an Actionscript 3.0 file, I then put my publication of Flash Player 9.0 and Actionscript 3.0 settings, but get an error as follows:
  
  "WARNING: the"FLVPlayback"component requires ActionScript 2.0."
  
  If someone has encountered this? I'm doing something wrong? I'm quite comfortable in Actionscript/Flash 2.0, but I'm only my first not in the relam CS3 and AS3.
  
  I've also attached a screenshot of the files which represent my FLVPlayback component (or so I assume). (see this link for attachments http://www.actionscript.org/forums/showthread.php3?t=140886)
  
  Thank you all,
  Mark
  
  
  
  http://www.ActionScript.org/forums/showthread.php3?t=140886

  Mark,

  > I put my settings of publication of Actionscript and Flash Player 9.0
  > 3.0, but keep getting an error as follows:
  >
  > "WARNING: the"FLVPlayback"component requires ActionScript 2.0."

  Gotcha. You have started the document in AS2, and then changed the
  publication settings. Each language version has its own version of the
  (Written in the language concerned) FLVPlayback component. Start over and
  compare two compleley new FLA documents: make one for AS3 and AS2.
  Open the components Panel and note the differences between the two. He
  are a different set of components according to the language chosen for the
  document. Drag the FLVPlayback components Panel in a
  AS3 document and you have the AS3 version.

  David Stiller
  Co-author, Foundation Flash CS3 for designers
  http://tinyurl.com/2k29mj
  "Luck is the residue of good design."

• The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  I am at a loss.  I've set up a root certification authority to sign all servers in my workspace of Horizon, SAML is in the Green and after a lot of reading when troubleshooting also synchronized on all my ESXi hosts and guests.

  Basically, what I did is the following:

  Set up the connection to the Server VMware View Horizon 5.2 - created different pools and can connect via the customer different platform. (a few times to eliminate any possible configuration errors along the way)

  Configuration of VMware View Horizon Workspace 1.0 (a few times now) with self-signed and CA signed certs.  My workspace appears fine, the synchronization of files, apps work, and view pools appear.  When I try to launch your desktop from inside the Horizon workspace I get this error:

  The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  Now I think that I followed it down to something to do with SAML connection - which, to my understanding, archery chips between workspace and view.  On the login server, I see it in the Windows event log:

  BROKER_USER_AUTHFAILED_SAML_ACCESS_REQUIRED

  SAML access required but not tempted by customer

  Attributes:

  Source = com. VMware.VDI.Broker.filters.SamlAuthFilter

  Time = MON may 20 16:06:41 MDT 2013

  Gravity = AUDIT_FAIL

  Node = ViewConnection.access360.ca

  Module = broker

  Recognized = true

  Something is not crossing to allow me to access my office view since the workspace of Horizon.  If I remove the requirement of SAML on the login server see, when I try to connect to a desktop computer from the view connection server I get a promotion for and can I get my IDs & field and have full access with reviews, as well as blast HTML - just cannot get there with Horizon Workspace.  There must be something that I am missing with SAML...

  As I said, I'm at a loss here on what does not work between the Horizon workspace and the connection of SAML for display to connect to the server.  There is no server security, server transfer, and firewalls is all off, so I don't think it's a network problem.  Simple as possible.  The Windows Journal event displays the login displays server error is: access required but not attempted by client SAML.  I have all my servers synchronized after a few seconds - so I don't think that documented the TIME Horizon workspace synchronization time sensitivity is responsible here.  I am Pack overnight, but will do exactly the same thing with a client of tomorrow - hopefully without the same result!

  Any ideas?

  A

  So I re-deployed the VAPP (again!) very attentive as I went.  As usual, the initial database installation failed because I entered my domain FULL of the gateway name, so it does not match.  After useful messages already there for this (Workspace install fails with error creating the user admin) I used the wizardssl.hzn of connfigurator - going to recreate a rootca to the environment based on my FULL domain instead of the bridge - going and then let it grow all for the other vApps.  I then connected to each and pulled down my private rootca and ran c_rehash, etc. (another useful message!- adding MS signed Certs to Horizon Workspace & laquo;) Carlos & #039; Corner) I actually use my background to UNIX and openssl to be my own private CA and sign all of my certificates.  I created the SAN cert and added to the SSL configuration on the Configurator - going and connector - going.  Oddly enough, both of these server do not appear to be accepting SAN cert that includes their ENTIRE domain, but that's for another day... My Horizon Workspace FQDN does show as being approved by installed RootCA private (which does not have other DNS names for the service - going, the Configurator - goes, the data - will and the connector - will, but as I have already said--a battle for another day) so it's a good thing.  I joined my workspace to my domain name - well!  Activated would be pools seen in the Configurator - goes - sync - good.  CRT for the my display login server has accepted and implemented the SAML trust.  Still good.  Sync in my opinion users group who already had a couple of linked clone pools allowed to do.  Good.  Connected to the FQDN of my workspace and clicked on computers - seen my 3 pools.  Clicked on one and after a few seconds, launched in a new window of the explosion.  Success!  I disconnected and connected on a different machine, and something that I saw before, but doesn't have a lot of attention to was the connector - will put 'use windows authentication', I couldn't understand why every time I sailed on my Horizon workspace a no vmware window opens asking access my FQDN:443 with a user and pass.  It is this setting - duh.  I'm not sure yet that gives me, so it's off for now.

  Thanks for all the input: it's good to know that there are others with some of the same questions.  It's still v1.0, it is related to some of these pitfalls.  It is capricious with derived from same time less than 10 seconds seems to have a negative impact.  Had to ensure my ESXi servers were strong (never worried a lot in the past with MS AD being quite tolerant with small derivatives) I tired my vApps affecting a NTP, but they seemed like being left to the default of synchronization to the ESXi host.  See how than pans.  CERT is somewhat capricious depending on your deployment.  Of course the connector - will and the Configurator - must be signed by a CA that they are internal, but always be nice to then have signed internal...

  Now, I'm on ThinApps for desktops as well as the web interface integration.

  I bumped my head against the wall with my first configuration of Citrix XA and XD (before having VDI in a box!) and it was the best way to learn.

  I don't know that I grave along that I finished my PoC, but I'm very happy with today's results.  I still plan on the comparison of my logs successful with the logs I have pulled my former deployment TIME and see what it was that it was broken.  I think it was that wanted me a PTR record to my domain FULL DNS MS. name  I think I just had the direct search for the original bridge - will and FULL, but only a setback for the gateway domain - name.  Would explain why I was never able to connect to the gateway to access your desktop.  Oops.

  A

• You need a newer version of the Pages to open this document.

  I have Pages 5.5.3.

  I created documents as recently as two days ago, but now I can no longer open them as a drop-down list advises me that "it takes a more recent version of the Pages to open this document."  This issue is beyond a joke!  I locked myself in my own documents? Please help as soon as POSSIBLE.

  You have 2 versions of Pages on your Mac.

  5.5.3 pages in your Applications , Pages ' 09 file in your Applications/iWork file.

  You have double-clicked on a document of 5 Pages , and he opened the Pages ' 09 , which cannot open it. Because the two versions have the same file extension .pages

  Right-click on the document and choosing 5 Pages (orange icon) to open it.

  Pages ' 09 may have been abandoned by Apple, but it always works and still has over 100 features more than 5 Pages and is much more effective and faster.

  Continue to use Pages ' 09, unless you need to Exchange files with an iPad.

  Peter

• How to load firefox when I get this message of corrupted content error, the page you are trying to view cannot be shown because an error in the transmission of data.

  When I connect Firefox, it starts to load the page problem loading page and this message pops up error content corrupted

   The page you are trying to view cannot be shown because an error in the data transmission was detected.
  

  Same problem here. I don't see a fix listed on this site. If anyone has found a?

• ' The page you are trying to view cannot shown because it uses an invalid form or not support compression. ' This happens only in the Fire Fox browser.

  When I try to access sourcea.fr to check my account, after I get my ID and password a window opens with the message "the page you are trying to view cannot shown because it uses an invalid form or not support compression. '" This only happens in the Fire Fox browser.

  Hi BAMIRANGE,

  ·         You try to use Internet Explorer and check to see if you encounter the same problem?

  If the limited issue of Firefox then the number you posted would be better suited in the Forums of Mozilla Firefox. I would recommend posting your query using Mozilla's Firefox.

   

  Support for Mozilla Firefox

  http://support.Mozilla.org/en-us/KB

  Hope this information helps.

• To view all of the content of this document, you need a later version of the PDF Viewer.

  I'm tryinbgn to read some PDFs on a website but get this message"

  To view all of the content of this document, you need a later version of the PDF Viewer. '

  
  

  I have the most updated version and another pdf on the site opened just well... suggestions?

  
  

  Hi richardr32727316 ,

  Please provide the exact point of the software & OS installed on your system

  Would you please check with different Internet browser.

  Also to disable the firewall & security services to reproduce the problem.

  This phenomenon occurs with all documents or with other institutions.

  Please refer to this article:- https://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

  I would like to know if it works.

  Kind regards

  Christian

• Web viewer error - you are not authorized to view this page

  Hello everyone

  I have a problem with my webviewer. The web viewer displays the following error "you are not authorized to view this page.

  Please follow this link to see the printscreen: http://imageshack.us/photo/my-images/708/v1d6.jpg/

  I checked the parameters of my account of the request:

  -Enable the web content viewer: checked

  -Hosting URL: ok

  -Redirect URL: ok

  So I checked my Folio publication settings

  -Publish Folio: NOW

  -STATUS: Public and free

  -Product ID: is correct.

  I also checked the box right edge binding.

  I checked the settings on the phone with the help of adobe and it seems that it is correct.

  I create my web page the file Sample.zip available in the Adobe documentation page-based web viewer (Embedding, content in your web page to web viewer)

  My account Id is correct (checked through the IPAD app)

  My wv Param is OK also

  I am sure of that because I can reach my folio via the direct URL "content.viewer.adobe.com/my way."

  The problem is that the folio do not appear in the webviewer in my index.html page. I don't have the error message in the Viewer, this error message is probably from an Adobe server.

  Please can you help me?

  Concerning

  The only time where this unauthorized error is when there is a problem with the URL of your accommodation. To ensure that your content can be hosted on a site not authorized by you, as the owner of the content, we check that the accommodation on your account URL is the URL that hosts the content. If you see this error and can reach your folio via the direct URL to contentviewer.adobe.com, this means that the URL of your accommodation is not configured correctly. Once you set the URL of your accommodation, your content will be visible on contentviewer.adobe.com; It will redirect to the URL of your accommodation. You said that you have checked the URL of your accommodation, but from your description, looks like it has not been properly defined on the specified account. If you still have difficulties, we can help if you provide your account information and folio.

  Thank you

  Christine

• You need to update your Flash Player and enable Javascript to view this content"

  I have recently updated for CS4 to CS6... all my Web Sites & pages still work... But now I get the message "you need to upgrade your Flash Player and enable Javascript" I'm on the last level of Flash Player and JavaScript is enabled?    This could be one that is Version 8 thing? Thank you

  Thanks for the help... I took your clue. Once I saw he worked in Live but NOT design... Who told me my Mgr Extension.   Somehow? DW passed the link to the SSv4_DW_ext.mpx. After I reinstalled it... works very well.   Thanks again.

• I currently have Safari Version 6.1.6 and that you need to update. Should what version of safari I download?

  I currently have Safari Version 6.1.6 and that you need to update. Should what version of safari I download?

  The latest version of Safari is 9.1. Apple page on this subject is here. Perhaps the reason best/only to use an earlier version if you are using an older version of OS X (pre 10.9.5) or a former Mac (before Intel processor.) You told us all this, in your question.

  Glendon Dick

• error code: 0 x 80070002: MS updates__The site has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem

  Hello

  Look in Control Panel - updates of Windows to see what is the KB and post it here. You can indeed
  There no need and do a right click on it and HIDE it. Let us know what is the update, so that we can
  help advise.

  Also, if you don't need it you can try to download it here.

  Microsoft Download Center - research on KBxxxxxx the number of update for anchor xxxxxx
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to the place where your put it - click on - RUN as ADMINISTRATOR

  If you need to fix the error:

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
  http://support.Microsoft.com/kb/956698

  Windows Update Error 80070002http://windowshelp.microsoft.com/Windows/en-us/help/c5f4d9e0-3eb6-426b-8118-0cedf489a75f1033.mspx#EJH

  Or - these two (above and below must be the same)

  Windows Update Error 80070002
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

  Fix Error 80070002 when using Windows Update in Vista
  http://www.mydigitallife.info/2007/12/21/fix-Error-80070002-when-using-Windows-Update-in-Vista/
  Error Code 0 × 80070002 during Windows Vista SP1 Setup Install - SP2 might have similar problem
  http://www.tipandtrick.NET/2008/error-code-0x80070002-during-Windows-Vista-SP1-Setup-install/

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
  http://support.Microsoft.com/kb/956698

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------

  If necessary, you can get free reports of incidents:

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows XP update error: 0x8024D001, the site has encountered a problem and cannot display the page you are trying to view.

  Original title: Windows XP ~ Windows Update problem.
   
  During three days of solid, and I slept then work, sleep and then working to solve a problem I have with the functionality of Windows XP Windows Update - this is the error message I get constantly

  [Error number: 0x8024D001]

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  I installed a new copy of Windows XP on a hard disk nine, installed Service Pack 1, Service Pack 2 and Service Pack 3, installed Internet Explorer 8 installed .NET Framework 2.0 as Microsoft requested, modified popup settings to allow Windows Update page to be free to scan my system for updates, etc... and I even enabled all Active X permissions BUT I still can't Windows Update to allow me to download all updates, patches, etc... Windows Update has generally

  I also turned on automatic updates requirement also BUT no dice - I can't just not update Windows to activate and start as normal, no matter how many times I format the drive and do a fresh install.

  I had to get a new drive hard as my old crashed.

  Now, I have to install Windows XP again but I noticed how old, easy to update somehow has been paralyzed.

  It's as IF Microsoft is crippling of Windows Update to start simple as pie, then now we users HAVE to jump through hoops to get our operating system Windows XP set to day and repeatedly queries Microsoft asks us or install 'FIX IT' service does not work and it is impossible to reach by phone about Microsoft , and the live online help runs into errors when it is installed, so I have to hit the Internet Forum here for advice.

  How, in words simple Windows XP allow Windows Update to run the scan, to download and install the process what it is supposed to do?

  What exactly is missing to allow the screen to show the green bar and scan the notificiation there have updates available?

  What I am doing wrong?

  I really hate to say this, BUT I'm literally at the edge of tears.

  Help!

  Is there a maintenance program master as an "all-in-One rollup patch" that will search the lack of programs, applications, and settings of Windows XP and makes a one-way relay to set everything right and ensure that the programs needed to make Windows Update work are knitted in Windows XP, including all programs missing subprogrammes and to settings then check their self errors or incorrect version but it provides goes off to FIND the RIGHT version of What is needed?

  Or better yet a disc Compilation of master i.e. Final Service Pack 4.0 that contains all fixes known on DVD that would be found in the downloaded Windows Update but rather is purchased for $10.00 that contains each hotfix and update known for Windows XP so that we can manually update Windows XP on the side of the user of the Internet without having to go on the internet?

  You need 3 things to WU work.

  WindowsXP-KB892130-ENU - x 86 .exe

  KB892130

  Windows Genuine Advantage Validation v1.9.42.0

  WindowsXP-KB898461x86 - ENU.exe

  KB898461

  Installs a permanent copy of the Package for Windows Installer

  And and unofficial WUA.

  He's right on obsolete dll of WUA that MS is not updated once sometimes for some unknown reason... even the WU Fix there don't solve it. I ran a few tests in the fall and virtual machine on the same issue yesterday. You must install the unofficial Windows UPDATE agent.
  Windows Update Agent below... MS last isn't the last. Boo Ms.
  Download WindowsUpdateAgent7.6.7600.256 - 257.zip to your desktop (MS does not have the latest version of Windows Update Agent. Only 7.4.7600.243 so make us with this).

  Unzip it, go to the folder and double-click RunMe - MakeInstallWindowsUpdateAgent.bat.

  It will download, MS, the files needed to create the Windows Update Agent 7.6.7600.256/257 and then install it. The files that it contains are 100% Microsoft. He uses just a few third-party tools to make it.

  You will be left with the installer, WindowsUpdateAgent7.6.7600.256 - 257.exe. Keep or delete. Your choice.

  Analysis antivirus for WindowsUpdateAgent7.6.7600.256 - 257.zip

  Information for network administrators about how to obtain the latest Windows Update Agent

  Taken from the newsletter above...
  View
  There is no stand-alone installer for the latest version of the Windows Update Agent (7.6.7600.256)

  EDIT: I forgot to mention. It took 1 hour before the scan finished for me. A guy that I was helping on another forum just let WU scan of the day to the next. When he awoke, the scan had the results. So please be patient.

  "Or better yet a disc Compilation of master i.e. Final Service Pack 4.0 that contains all fixes known on DVD that would be in the downloaded Windows Update, but instead is purchased for $10.00 that contains each hotfix and update known for Windows XP so that we can manually update Windows XP on the side of the user of the Internet without having to go on the internet?

  You can create a CD to date and does not deal with all the hassles during the fresh installation. You need nLite and my script of the UDC. You will only need SP3 when "slipstreaming". No SP1 or SP2.
  

• Automatic updates program turned out impossible to turn it on, with error message "site has encountered a problem and cannot display the page you are trying to view.

  Original title: Auto updates

  My automatic updates program is disabled.  When I try to turn it on, I get this message "the site has encountered a problem and cannot display the page you are trying to view.  Automatic updates forever, why was off and why he now won't come back?

  Bill T

  E-mail address is removed from the privacy *.

  Hi Bill,

  This problem can be caused if the automatic updates service may be missing in the Services snap-in.

  1. is the Service Pack 3 installed on your computer?

  2. what anti-virus software you use in your computer?

  Follow the steps below:

  Method 1:

  To resolve this issue, follow these steps:

  1. Click Start, click run, type explore, and then click OK.
  2. Look for the following folder:

  %windir%\System32\inf

  Note The %windir%\System32 placeholder represents the path of the WINDOWS System folder. Typically, C:\WINDOWS is the path of the WINDOWS System folder.

  The inf folder is a hidden folder. To view the inf folder, follow these steps:

  a. on the Tools menu, click on Folder Optionsand then click the view tab.

  b. in the list of Advanced settings , click to display the hidden files and folders under hidden files and folders.

  c. click applyand then click OK.

  3. double-click on the inf folder, right-click in theand then click install.

  4. click on Browse. Look for, and then click the \ServicePackFiles\i386 %windir%\System32folder if the following conditions are met:

  • You install Windows XP SP3 from a CD Windows XP SP3 which included as part of the basic installation of SP3.
  • You have downloaded and installed Windows XP SP3 from the Microsoft Web site.
  • Windows XP SP3 was included with the computer.

  Note If the files from the Service Pack folder is not present on the computer, you can copy the files from a Windows XP SP3 slipstreamed installation CD.

  5. click OK to copy the files.

  6. change the setting on the computer to not display the hidden files and folders. To do this, follow these steps:

  1. On the Tools menu, click Folder Options, and then click the view tab.
  2. In the list of Advanced settings , click show not the hidden files and folders under hidden files and folders.
  3. Click applyand then click OK.

  7 restart the computer and check.

  Method 2:

  Follow the steps in the link below.

  You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update:

  http://support.Microsoft.com/kb/883614

  For reference:

  How to configure and use automatic updates in Windows:

  http://support.Microsoft.com/kb/306525

   

  If you need further assistance on this topic, let know us and we will be happy to help you.