Safe on Etherchanel / 802.3ad, it works with vmware esx?

Similar Questions

• 6224 do not work with vmware 5.1 battery

  I have 2 switches 6224 with battery and config its ok.

  Dell #show switch

  Code of Plugged-in Switch preconfigured relief management
  SW status model ID ID of the model State Version
  --- ---------- --------- ------------- ------------- ------------- -----------
  1 Mgmt Sw PCT6224 PCT6224 OK 3.3.3.3
  2 the battery Oper Stby PCT6224 PCT6224 OK 3.3.3.3 Mbr

  but I have the same problem in my VMWare HA 5.1 environment

  example:

  I have 3 Server with 4 ports on each server

  Server 1 > 2 iSCSI ports and 2 ports for the network traffic
  Server 2 > 2 iSCSI ports and 2 ports for the network traffic
  Server 3 > 2 iSCSI ports and 2 ports for the network traffic

  Traffic networks

  Server 1 > 1 port to port 1 switch 1, 2 in the swtich 1 port port 2
  Server 2 > 1 port to port 2 switch 1, 2 in the swtich 2 port port 2
  Server 3 > 1 port to port 3 switch 1, 2 in 3 in swtich port port 2

  The problem, if I log out all switch ports 2 of trafficking networks, environmental works fine, but when I connect the cable of the switch 2
  the crash of the environment and the back work just when I disconnect the cable from the switch 2.
  In my VMWare Distributed Switch I configure 2 ports with route ip hash basis.

  I would like in my environment the switches in the stack to work with vmware HA in the network adapters on servers.

  sameone have sugestion for this problem for vmware works ok with dell stacked 6224

  Concerning

  Hello

  I can solve my problem.

  ports was config with frames in all the ports, I change to 1518 and too check that spanning tree enable in the ports of the vmware hosts, I disable spaning tree in the port of the host and stack of work 100%.

  Thank you all for the help

  Kind regards.

• several doubts with vmware esx 3.5

  guys, I had many doubts on VMware ESX. can you please answer me if you know the answers to any of the sub questions

  In the meantime thanks for all those who respond to my questions.

  (1) how to install ESX on the SAN to start on the SAN?

  (2) how to back up the database to the virtual Center Server? is it something that supports a SQL DBA or do we do as a VMware administrator?

  (3) for the installation of VCenter server, its request for the installation of the apache tomcat server. Why is this? It is with ESX 3.5

  (4) do we need a separate license for VCenter server apart from the licenses that we buy for the ESX servers?

  (5) if 2 virtual machine port groups are on two different VLANS, to send it, we need to configure a vyatta router. How can we do that if we are not a guy from Cisco?

  (6) we give only the IP numbers for a console Service and Vmkernals but not the virtual machine port groups. If so, how these virtual machines on these virtual machine port groups know what are their IP numbers? If we want a static IP number for a virtual machine, we inside windows from a virtual computer configuration?

  (7) is the Virtual Machine power off a soft stop?

  (8) what happens when we make one pause a Virtual Machine? I think that there is no option in a machine physical windows original. so, what does this mean VM break?

  (9) how many vsphere client can simultaneously access the vcenter Server?

  (3) for the installation of VCenter server, its request for the installation of the apache tomcat server. Why is this? It is with ESX 3.5

  Don't know why VM Ware chose Tomcat, they SAY THEY is not secure... No matter what.  It's just another Web server and its an option that VM Ware has chosen to work with vCenter.  It's not good or bad, just different... many people THINK apache is better, it is a matter of opinion.

  (6) we give only the IP numbers for a console Service and Vmkernals but not the virtual machine port groups. If so, how these virtual machines on these virtual machine port groups know what are their IP numbers? If we want a static IP number for a virtual machine, we inside windows from a virtual computer configuration?

  It is a way, you will realize quickly that will be a major pain.  I do like DHCP, reserve of the INVESTIGATION period.  Unless you know a way to connect to hundreds of virtual machines and change their IP remotely, this is probably the simplest method.  Unless you like make manual updates... then knock you out.

  (7) is the Virtual Machine power off a soft stop?

  Not as the name suggests it is a POWER-off.  Comments stop is a soft stop.

  (8) what happens when we make one pause a Virtual Machine? I think that there is no option in a machine physical windows original. so, what does this mean VM break?

  Confusion in the name.  It simply means 'suspend' and there is an option on physical machines... probably no servers, in the form of profiles of power are generally disabled, but it IS possible.

  (9) how many vsphere client can simultaneously access the vcenter Server?

  no theoretical limit... or I do not think that someone took the time to discover.  You will grow up to the moment where you have too many users connected to vCenter vCenter anyway... So the connections will not be reached.

• Working with VMware Server 2 Terminal | Linux

  Hello guys.

  I just downloaded the VMware Server 2 and I want to install it on my linux dedicated server using ssh because I do not have a GUI on my server. I don't know how things work here, but I guess it's a kind of forum. The mine is a question. I can install it like this?... and then create my virtual server using ssh, configuration there and that sort of thing? Is there a howto or documentation because I looked but found nothing so far. I would be very grateful if someone can give me a tip.

  My server Debian Lenny 5. It is an Athlon 2 x 2.8 Ghz with 2 GB ram and got enough HDD.

  VMware Server can be installed without problems on a terminal (also remote with SSH) text.

  Management of virtual machine, you can use or VMware CLI or (easier) the web administration page.

  See the documentation on the site of VMware Server 2.

  André

• Toshiba button Support do not work with VMware Workstation

  Hi all

  for all people having the same problem - * Support Button Toshiba do not work after the installation of VMware Workstation.*

  Short solution:
  After the installation of vmware workstation 6.x or 7 - the default setting is "Disable Autorun on the host". (you can find it in: Edit-> preferences-> devices). Release the hook and restart. After the reboot, the buttons should be working.

  The long version:
  Support Button Toshiba uses the Windows function "MobilePC" - > "Hotstart". HotStart only works when the autostart feature is not disabled (the value of registry key: + HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Po licies\Explorer\NoDriveTypeAutoRun + has the value 0xFF). VMware is the default to disable Autorun of CD/DVD. Turn on the autorun, restart the Qosmio and Hotstart (and also Toshiba button support) works very well. That's the problem.

  Greeting
  Thomas Wermuth

  Thanks for the solution. :)

• Try to get ESX 3.5 work with EMC CX200 [joint Direct]

  Hello world

  Anyone else running a Dell / EMC CX200 configuration with VMware ESX 3.5?

  I am being charged to take two recently introduced Dell 2850 which were broadcast from Emulex LP982 in a direct CX200 attached for years without any problem and put it ESX 3.5 on them, so we can virtualize on the CX200.

  I have a host ESX 3.5 Eval living and speaking very well to the CX200.  I am very satisfied with the performance.

  Bringing the second host online, this is where to get a weird behavior seriously: host crashes, bombs of I/O, etc..  If you want newspapers, I can catch them.  I think that it is such a simple plant that I'm missing something obvious.

  Connectivity is as follows:

  HOSTA - & gt; Emulex1-

  ---

  & gt; SPA0

  HOSTA - & gt; Emulex2-

  ---

  & gt; SPB0

  HOSTB - & gt; Emulex1-

  ---

  & gt; SPA1

  HOSTB - & gt; Emulex2-

  ---

  & gt; SPB1

  I updated the firmware in all but the TORCH on the CX200 = $$$.

  I guess that the host of the 2nd is stepping on toes somewhere.  Arbitrate paths inside the LUN Configuration ESX work this out?  What failover vmotion & path?

  I'm about to cusp of something good here, just need of a sudden boost on getting 2nd host cooperating.

  Thank you

  Docz

  Post edited by: docz

  Hello

  If the CX200 does not have a storage processor then what you do will not work because each host interfere with other metadata for guests. If she has a storage processor then you really need to a fiber switch as direct attach to a SAN not is not supported.

  Best regards
  Edward L. Haletky
  VMware communities user moderator
  ====
  Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
  Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast

• Satellite Pro 6100 how to use recovery DVD-ROM with vmware products

  Hello

  I like to use the recovery DVDs of product (T201651-GR) of my Satelite Pro 6100 on VmWare player, because I use openSUSE Linux as main operating system (not Windows installed on the hard disk).
  I do like install and save hard disk laptop, so that to restore later inside the vmware. If it works?
  I wonder if someone can tell me how to use my legal version of Windows XP on VmWare player?

  Thank you in advance,
  Bernd

  Hello

  I doubt that it works with VmWare.
  Why?
  Because the restore CD contains the ghost image files and you will need to boot from the recovery CD for installation.

  So I see the chances of getting this job running VmWare.

• Microsofts free vm for testing IE won't work in vmware fusion.

  On the link below, there are windows free 7,8,10 vm s to test different versions of internet explore.

  I can't work in vmware fusion, because after importation, they have no internet connection.

  The internet Control Panel does not show upward and is not listed under devices when you import the virtual machine.

  https://dev.Windows.com/en-us/Microsoft-edge/tools/VMS/Mac/

  Could someone explain to me why these don't work with vmware fusion?

  Hi whimsica,.

  Welcome to the Fusion community.

  For your problem, I noticed that there is no virtual NICs for the imported virtual machine. You can add it yourself by stopping the virtual machine and then click Virtual Machine-> settings-> add device...-> network-> Add card, then turn on your virtual machine.

  Hopefully useful.

• VCenter Server with VMWare ESXi free 5 5

  Hi all

  Test the VCenter Server 5 Evaluation (60 day trial) to management all my 5 of VMWare ESXi (free license). It works with restrictions. These restrictions aren´t a problem for me. I need only to move (power off of virtual machines), clone, create templates for and organize my servers in a single interface VSphere Client. So, I would like to know what type of license of VCenter Server 5 woks if VMWare ESXi 5 free. Buy the VCenter Server 5 Standard?

  Another doubt is if VStorage works with VMWare ESXi free license I.

  Best regards

  Fabio Sobral

  Unfortunately the free ESXi hosts in vCenter management is not possible (except for the eval). The hosts of ESXi need a vCenter Server Agent license that is only available in editions 'paid' of ESXi.

  André

• 12.0 Firefox works with Norton Identity Safe?

  I recently updated to Firefox 12.0 and wanted to take advantage of Norton free offering their app Identity Safe. I am running Mac OSX 10.7.3 and when he took me to the mac app store, it loaded the extension in Firefox my Ribbon on top, but when I click it, it opens in Safari. It is not compatible with Firefox?

  The site of norton said that it is compatible with firefox https://identitysafe.norton.com/, however, I can't find which version it works with. I would try to contact norton to find the exact version numbers, with which it works.

• just installed norton 2012 'web safe' does not work with firefox

  I just installed Norton I / S 2012, bar tools Norton safe web and identity safe does not work with Firefox 7.0.1, but it DOES not work with my internet explore, what is wrong?

  All first please update your browser Firefox 8

  • getfirefox.com

  go to the Firefox button or Tools-Addons-extension and check if the extension of Norton is deactivate or activate

• Reference Dell PowerConnect 8024 - 802.3ad (dynamic LACP) through 2 switches?

  We evaluate the use of switches Dell PC8024 to upgrade our backbone to 10GbE.  We use currently HP ProLiant servers with multiple network cards are associated.  The servers support 802.3ad HP dynamic aggregation of links (LACP).

  The switch PC8024 does support the aggregation of dynamic links through 2 different switches, or should it be on the same switch?

  In comparison, the HP2910 switches can support aggregation (LACP) dynamic links across multiple switches, while the HP2920 switches can.  If some can, some can't.  Need to understand the ability of the switch to PC8024.

  Thank you!

  -Terry

  Hello Terry,

  The 8024 does not support a SHIFT of two different switches, the only way it would work, if the switches are stacked and effectively a single switch. If you have used the new series N4000 they take over MLAG, allowing for the OFFSET will be in both switches and they communicate via a peer.

• 802.3ad link Aggregation - 4 NETWORK cards

  I'm working on a project that requires four physical NIC be connected to two separate Cisco switches for redundancy.  I need access to a minimum of six networks through these four physical NETWORK card ports using ESX 3.5.

  Our plan is to use the Routing and aggregation (Etherchannel) on Cisco switches.  What we want to do is basically aggregate two NIC physical port trunks to each of the two switches Cisco Etherchannel.  We would allow routing based on IP hash on the unique vSwitch with four network adapters are associated.  We would use a separate vSwitch for vSwif0 and vmkernel port not part of the trunks.

  Seems this configuration good to you?  Looking for networking people comment on the above configuration.  Thank you.

  This is a discussion that asked the same question.

  http://communities.VMware.com/docs/doc-5000

  This is an insertion of the blog of Kevin Cline.

  http://kensvirtualreality.WordPress.com/2009/04/05/the-great-vswitch-debate%E2%80%93part-3/

  A technical requirement for the use of hash of the IP, it's that your physical switch must support 802.3ad static aggregation of links. Often, this means that you have to connect all the natachasery in the vSwitch to the same pSwitch. Some switches high-end support links grouped in pSwitches, but many do not. Contact your switch vendor to find out. If you do not have to put an end to all the natachasery in a single pSwitch, you introduced a single point of failure in your architecture.

  If your provider supports the links grouped in all of pSwitches, great.  Otherwise, you may need to consider another approach.  You can have redundancy between switches without etherchannel and just routing based on originating port ID.  So you could create a vSwitch with 4 NICs (two on each pSwitch) without a trunk and let ESX base for outbound traffic load balancing.  From my experience, you are much more likely to be CPU or memory bound as bound network.

• Updated and now the phone won't work online only works with 4G

  Download ios 10 and now my phone does not work online only work with 4G

  Hello thomas.friar,

  Thanks for asking for help with your iPhone to connect to the internet via wi - fi since the upgrade to iOS 10. We don't like to hear about the problems that occur after an upgrade. Here's what I recommend.

  The first thing we want to make sure that all of your data on the Mac and the iPhone is safe. For iPhone, you can perform a backup in iCloud or iTunes using this article: backing up your iPhone, iPad, and iPod touch.

  Then, follow the steps in this link: If your iPhone, iPad or iPod touch connects to a Wi-Fi network

  Thanks again and have a great rest of your day.

• e-mail no longer works with firefox

  Yahoo mail no longer works with firefox. but there is no problems with yahoo mail when I use chrome. This problem started a week ago. today is 02/07/15

  You can try the following steps in case of problems with web pages:

  You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and delete cookies only from Web sites that cause problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes