Sale on Visual Studio 2008 Professional Edition Academic

Similar Questions

• Re: Cannot install Visual Studio 2008 on Vista 32-bit

  Hello

  I have a satellite P200 with Vista Home premium SP1 and I need to install it on Visual Studio 2008.
  When the install wizzard starts it checks the compatibility of the computer and could not return this:

  "Setup has detected that this computer does not meet the requirements to install this software. These conditions must be met before you can install Microsoft Visual Studio 2008 Professional Edition - ENU
  Requirements and software prerequisites
  Windows XP Service Pack 2 update information
  You must install this service pack to complete the installation. Visual Studio requires the installation of this service pack before you install Visual Studio"

  So the only solution I have is to exit the installation wizard, so I can not install VS2008

  It seems that someone else has the same problem with a Toshiba Satellite also! See http://forums.microsoft.com/MSDN-FR/ShowPost.aspx?PostID=3392455&SiteID=12
  Microsoft product support has apparently no solution and find it strange!

  So please help me, I absolutely need of VS2008 to work and I change my laptop only because failed to install VS2008

  Thanks a ton in advance for

  Pascal

  Post edited by: pfo69

  Hi mate,

  Sorry, but just because one person in a MSDN forum has randomly the same machine you, does not mean that there is a related problem of the machine. Technically in comparing it s absolutely the same material as in an office and so why Don t you contact Microsoft technical support?

  It seems that it is certainly unwanted Microsoft and has NOTHING to do with Toshiba hardware or software, so please see MS support sites or give them a call, because it s THEIR software which won´t operate according to THEIR operating system.

  Welcome them

• why no tool in visual studio 2008 toobox

  I thought that visual studio came with a common tool set, but I do not have. This is Visual Studio 2008 Professional Edition running on Windows SP SP3

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited to the audience on MSDN. Please post your question in the below link:

  http://social.msdn.Microsoft.com/forums/en-CA/vssetup/threads

• I get the blue screen error after installation of Visual Studio 2010 Professional Test Edition. Help?

  A brief overview of ALALA situation and how it happened:

  1. I went to microsoft.com and download Microsoft Visual Studio 2010 Professional Trial Edition

  2. I opted to use the Installer web pro (4.3 MB) and it correctly installed, restarted and completed the installation.

  3. I opened one of my previous Visual Studio 2008 Solutions and it prompted me to convert the solution.

  4. it is the solution converted successfully and open well.

  But now for some reason any my computer started to give me a blue screen. It forces the computer to restart, and then it connects back with errors:

  "The system has recovered from a serious error, a log of this error has been created"

  "Error signature".

  BCCode: 1000007f BCP1: 00000008 BCP2: BA348D70 BCP3: 00000000

  "BCP4: 00000000 OSVer: 5_1_2600 SP: 3_0 product: 256_1.

  "The following files should be included in this error report:
  C:\DOCUME~1\DSmith1\LOCALS~1\Temp\\WER81ad.dir00\Mini10311-04.dmp

  C:\DCUME~1\DSmith1\LOCALS~1\Temp\\WER81.ad.dir00\sysdata. XML ".

  It's about every 30 minutes now. It only started after installing Visual Studio. Any help?

  Hello

  You can check this link:

  General causes of errors "STOP 0x0000007F"

  http://support.Microsoft.com/kb/137539

• Memory minimum allocation for Vista Business Edition with Visual Studio 2008 VM?

  Long time listener, first time caller...

  Please excuse me if this question is answered somewhere else, I tried from Google and it came only with a response that was sort of what I was looking for, but was specific to a Macbook with Fusion...

  I want to create a Vista Business Edition (SP1) virtual machine with Visual Studio 2008 (which I think also is delivered with SQL 2005 Dev Edition) and I was wondering what the minimum memory allocation should be for this in order to make it work properly?

  Thank you

  Jim

  Hello and welcome to the forums.

  Amount of minimum support from Microsoft for Vista Business is 512 MB and 768 MB or more recommended for Visual Studio.  1280MB is the minimum.  Personally, I do not want anything less than 2 GB to a virtual machine with Vista and Visual Studio - 1 GB each.

  One of the great benefits of virtualization is that you can start this virtual machine with 1.5 GB and try it.  If the memory is not sufficient, then it is simple to give another 0.5 GB to the virtual machine and try again.

  Good luck!

• Compile the external code with Microsoft Visual C++ 2008 Express Edition

  Hello

  I'm trying to compile c code to work with Labview (CIN or dll). In the past I did without problem using visual studio. I'm having a really hard time compiling the code with

  Microsoft Visual C++ 2008 Express Edition. I'm trying to compile one of the examples that come with Labview (multiply 2 numbers for example).

  I don't know how to set the project with Microsoft Visual C++ 2008 Express Edition. I read on the web something make a folder of lvm with Labview makefile. Is this really necessary? If so, how to create this file?

  Thank you

  Eyal

  Thanks for your reply.

  In fact, I found a way to create a dll on the web:

  http://decibel.NI.com/content/docs/doc-1690

• Do not see the Option Measurement Studio Visual Studio 2008 project

  I just installed Measurement Studio 2010 sp1 for Visual Studio 2008, but I don't get the option Measurement Studio Visual Studio 2008 under any .net language project. I have to configure something else?

  Thank you

  I use the professional version of Visual Studio, and YES that's what I wanted. In fact just, I solved the problem by removing and then reinstalling Measurement Studio.

  Kind regards

• A security update for Microsoft Visual Studio 2008 Service Pack 1 XML Editor (KB2251487)

  Friends, y ' All must help me with that.

  I don't know all you Vista users know aware of the KB2251487 of security update.

  Told me all the time that I need to install this particular update. I click on install and after 72hrs, 365 days or something else, the installation is still stuck at 0%.

  1. It's bugging me to no end. I searched in the Microsoft forums for help on this topic and I tried all them; None of them work.
  2. I called Microsoft support even, but I was told that I will be charged $ 99.00

  I mean... come on!

  Could someone out there please help me out on this... for free?
  Please, I beg you!

  Thank you, I would really appreciate it!

  Hello

  1. you receive an error message/code when you try to install the update?
  2. what troubleshooting steps did you do to fix this?

  I suggest you follow the mentioned below of the methods.

  Method 1: perform the clean boot to see if you can install the update.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: after you perform a clean boot, perform step 7: reset the computer to start as usual from the article above.
  If the problem persists, follow the methods.

  Method 2: reset the windows update components.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Method 3: download the update below and install it manually.

  First install Visual Studio 2008 Shell (integrated mode) with Service Pack 1 Redistributable Package from the link:

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=16480

  Then install Microsoft Visual Studio 2008 Service Pack 1 XML Editor Security Update from the link below:
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26419#system-requirements

  Reference: Impossible to install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

  Warning of Chkdsk.

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  See also the link: http://social.msdn.Microsoft.com/forums/en/vssetup/thread/c87d70ab-b536-4cf8-a7eb-f78764bf8b3f

  Hope this helps!

• New review of Developer - Visual Studio 2010 professional

  I am very new to develop and would appreciate your help. I have developed using Visual Studio 2008 under an educational license and is now looking to develop a commercial application.

  I am looking to buy Visual Studio 2010 professional, but want to clarify some important points:
  (1) is a license automatically included to purchase produce a commercial application that can be sold worldwide (small scale)
  (2) Visual studio 2010 Professional allows a request to be released in a stand-alone executable file? because my educational version required for each computer to have a version of visual studio to run
  (3) Visual Studio 2010 professional does allowing databases to be created, held online and accessed/updated form to update several points at the same time? It is the function of SQL server?
  I would be very grateful for any help, cheers,.
  Tom
  p.s. I've struggled to find an appropriate forum to put this in so if someone can point in the right direction id appreciate it

  Hi TomKK_123,

  The question you posted would be better suited in the following forums:
  http://social.msdn.Microsoft.com/forums/en-us/categories

• Visual Studio 2008 Standard or Pro?

  Hello

  I'll try and make my first plugin for InDesign 5 Windows.

  What development tool would you recoment?

  Visual Studio 2008 Standard or professional.

  Best.

  In my humble OPINION Standard is very well - she does everything I need.  You can almost get away with the

  free Express version if you do not want to add plugins to it (but I like Assit V

  (X).

  Ian

• Visual Studio 2008: Default patterns in Server Explorer

  Visual Studio 2008, ODP.NET 11.1.0.6.20
  
  When I create a data connection in Server Explorer of Visual Studio, specification of the supplier provided by ODP.NET, provide a user name and password. When I develop this connection in Server Explorer, I don't see tables, packets, etc, that this user has permissions for only tables, etc., that this user is owner directly.
  
  Is it possible to display the tables that has permissions for the user, but does not have?
  
  Thanks in advance!
  James

  Hello

  Yes. I use the latest tools ODT and you just need to set up the filter for the collection of connections for your connection to include additional schemas you want to displayed objects. The tables in the other patterns for which the user has permissions will appear as .tablename (diagram)

  For example if I set a filter and add the SCOTT schema to my connection to HR and HR has permissions on the EMP table, I'll see (SCOTT). EMP appear under the tables for my HR connection.

  highlight the connection node you want moidy and choose filters or right-click on the specific connection node and choose Edit, then click the filters tab to change the file servers.

  HTH
  Jenny B.

• Measurement Studio for visual studio 2008 8.1.2

  Hello, I installed Visual Studio 2008 and I use the Visual C++ 2008 him.  However, Measurement Studio 8.1.2 (which I have) do not natively connect to VC 2008.  I tried to manually add the box controls to tools... but namespace NationalInstruments.UI.WindowsForms seems not to be there?  Maybe I need to change something somewhere?  Any help would be most appreciated.

  Defiance-

  If I understand correctly, you are trying to add references to assemblies .NET Measurement Studio for a C++ 2008 project. Is this correct?

  In this case, when you have created your project, you chose one of the models in the CLR (see screenshot) category?

  If so, then to add references to assemblies Measurement Studio, you go into the Visual Studio point Project menu > properties and select common properties > structure and references > add a new reference. MStudio 8.1.2 assemblies should appear in the list. If this isn't the case, you can navigate to them. They have installed by default on \Program Files\National Instruments\MeasurementStudioVS2005\DotNET\Assemblies\Current. Make sure that you add all required dependent assemblies (usually NationalInstruments.UI.dll and NationalInstruments.Common.dll).

  Also, you should be able to create a box Tools tab and add controls.

  If you try to do something else, could you give more details on exactly the type of project you want to create?

  David Rohacek

  National Instruments

• Tracing with Visual Studio 2008 works only the 1st time

  Hello

  I use Visual Studio 2008 and TestStand 4.1.1.

  I have a c# dll and I'll call a function of TestStand.

  In VS, I "join to deal with...". "and choose to attach it to TestStand. I start my sequence and VS to get to the point break that I set myself in VS.

  Everything is great.

  Now if I "Stop debugging", I do some changes for my dll, recompile all right and reattach to TS, everything seems ok.

  But if I start my sequence, do not strike my breakpoints and step runs without me trace in my c# code.

  The only workaround is to close TestStand, restart it, reopen the sequence and reinstall VS on it, then works again my breakpoint.

  What's wrong? I wouldn't restart TestStand whenever I do change the dll and reattach. I tried to unload all modules also with no success.

  I do something wrong or solutions to avoid restarting TestStand after changes to the c# code and you want to draw it.

  Thank you.

  Hi Matt,

  First of all, I tried to replicate what you experience following your instructions, but I couldn't recompile the DLL after the stop debugging in Visual Studio, because the DLL was still in use in TestStand.  After I unloaded all the modules, I could recompile.  I then re-attached and saw what you were doing.  So, to get around him, I tied to the process in a slightly different way.  In Visual Studio, I went to tools' attach to process, and then chose the seqedit.exe process.  Before mounting, I pressed the Select button on the right side of the dialog box in the middle of changing the type of code we are debugging.  Select the radio button "Debug these code types" and verify that "Managed".  This will ensure that the debugger attaches only to managed code (c#).  After I did, I could run my sequence again without having to restart TestStand.

  I would like to know if it works for you.

• Visual Studio 2008 with Labview order, use of PlotWaveform commando

  Hello

  I want to use the Labview/CVI following commando: PlotWaveform in Visual Studio 2008.

  But I get a return-10 error when I try to use PlotWaveform.

  I use the following code:

  #include "stdafx.h".
  #include
  #include
  #include
  #include
  #include
  #include
  #include
  If (InitCVIRTE (0, 0,0) == 0)
  Returns - 1; Not enough memory

  int panelHandle is NewPanel(parentPanel,"Graph",top,left,height,with);.
  printf ("panelHandle: %d\n",panelHandle); ")

  int nNewCtrl is NewCtrl(panelHandle,CTRL_NUMERIC,0,10,10);.
  printf ("nNewCtrl: %d\n",nNewCtrl); ")

  DisplayPanel (panelHandle);

  int PlotWaveform_RETURN_VALUE = PlotWaveform (panelHandle, nNewCtrl, myArray, 4, VAL_DOUBLE, 1.0, 0.0, 0.0, 1.0, VAL_FAT_LINE, VAL_DOTTED_SOLID_SQUARE, VAL_SOLID, 1, VAL_RED);
  printf ("PlotWaveform_RETURN_VALUE: %d\n",PlotWaveform_RETURN_VALUE); ")

  RefreshGraph (panelHandle, nNewCtrl);

  When I run the program is the result:
  panelHandle: 1
  nNewCtrl: 2
  PlotWaveform_RETURN_VALUE:-10

  I get a graphic image but no graphics. And the frame that displays is not working properly.

  What is the problem with the function PlotWaveform, what is him Error-10 show ?

  BR
  Benjamin

  Benjamin,

  This error means that you place an order for wrong type for the function in question. And that's because you create a control of type CTRL_NUMERIC instead of CTRL_GRAPH or CTRL_GRAPH_LS.

  Luis

• What is Measurement Studio 7.1 compatible with Visual Studio 2008?

  I'll be able to use v7.1 Measurement Studio with Visual Studio 2008, VB.net?

  Thank you

  Joe

  Hello Joe,

  Measurement Studio 8.5 was the first version using Visual Studio 2008, VB.NET.

  NickB

  National Instruments