Same policy, different size on different platforms

Similar Questions

• Make my MXF project format MXF spews on more than 25 copies of the same file: different sizes?

  When making my MXF project format MXF spews on a ton of makes MXF the same file: different sizes?

  The reason I want to make an another MXF is in the first place, because when I go directly to the project with all the various effects, Magic Bullet Looks, etc, etc.

  in another format, there are always problems.

  Therefore, I have not choice but to descend a generation to gather footage and made an exact copy of what is in the project to the MXF format before I make an MPEG or a H.264.

  The size of my project is more than 100 GB...

  In any case, my most likely choice is to go with the file with most gigabytes. As I say... He spits the different sizes.

  Is there a way to stop the rendering to spit on a ton of MXF files and streamline all in MXF format?

  I searched and searched the Internet for the answer and have checked the forums without success.

  The other thing that concerns me is that a project of more than 100 gigabytes becomes a 3.4 GB file to a 97-minute film. (It also makes a MXF to 1.5 Gig size. Everything is exactly the same thing on this record as far as I know, the rendering of Gigabyte 3.4) that she return 25 to 3.4 GB MXF files. (It's also take up a ton of space on my drive hard whenever I visit)

  It doesn't seem wise because when I visited about 8 minutes from the beginning of the film, he made a 2.9 Gigabyte file contrast with Gigbyte 3.4 file for the entire film.

  Somehow, I think that I can get the same quality when rendering the entire production.

  In addition, it takes more than 5 hours to make a MXF and I feel if it was just on 1 file, such as difference in more than 25 of the exact same rendering MXF files, rendering time would be faster and more efficient.

  Any help or explanations would be appreciated...

  Thank you

  James

  P.S. I deleted a whole bunch of MXF files to make, believeing that they were all duplicates. Of course, they were not, because the one I saved, I put in first to check and it displays only one segment of the film. Therefore, I think that all of the MXF should be connected and when you transfer one in, full MXF is displayed, however... If you delete everything except a MXF thought they are all duplicates, you only this segment of production. Seems to work quite the way to crazy? lol that sounds too wise in what concerns the gigabytes. However, first give the properties for that 1 file that you are importing, even if it is connected to all the other files. Projects likely to be total MXF gigabytes. Because I deleted all the files except one, I'm re - make everything. I'll let him place in case someone else runs into the same situation, I am sure someone will... lol

  the effects were interfering with a good record.

  It's probably not the right explanation.  Many export (which is different a rendering, take note of that) their projects directly from the sequence, effects and everything and get perfectly workable results.  In fact, I would say more that everybody does things like that.  I use MB effects for years, and yes it's hard reading.  But export always out just fine even on my system of $800.

  While your exports come out wobbly, it would probably be to fix it the problem to be solved.  But I would probably start looking for somewhere other than the effects.  Only those should not create the issue you described.

• Java on different platform

  I have a Java source code is compiled.
  Is it possible for me to run on the version diffenet for Windows platform (32-bit or 64-bit and Windows XP, Vista, 7, or 8)?
  Is it easy to compile once and run on a different platform?

  BusMan29 wrote:
  I have a Java source code is compiled.
  Is it possible for me to run on the version diffenet for Windows platform (32-bit or 64-bit and Windows XP, Vista, 7, or 8)?

  Yes.

  Is it easy to compile once and run on a different platform?

  It has already been done.

  All you need to do to run your program on another PC installs a runtime environment Jva for the target PC architecture and operating system. (Most likely it is already there).

  There is only a single pitfall: the JRE on the target system must have the same or higher major version (for example: 1.7) as the JDK, you compiled with.

  Good bye
  DPT

• CATALOG RMAN WITH DIFFERENT PLATFORM

  Respected by all,
  my linux platform database and can create rman catalog in the windows platform?
  
  
  Thank you all for the reply.

  This is the same mechanism of functioning of the LINK DB in heterogeneous platforms like Oracle to SQL server, and vice versa.

  When you be able to update the database of different platforms, why not possible when the operating system is different.
  It will keep the repository with ORACLE, nothing to do with the OS.

• I have to buy 2 licenses for my computers in different platform?

  1. do I need to buy 2 licenses for my computers in different platform? In windows, another is a macbook pro.

  2. is it possible for me to install cs6 on multiple computers using a license?

  Thank you.

  If you buy the perpeptual license it would be specific OS, in this case, you would have to buy 2 separate license however if you go for the creative cloud then in this case it would be OS independent, you can install with cloud 2 or creative on 2 Windows Mac or windows 1 and 1 Mac.

  In addition, with each license, you get 2 activation so 2 can use the software on machine 2, but not at the same time.

• How to import a layer that will have the same place and size that I have chosen?

  I have a lot of web to create files.

  All the products I have, can be chosen in 8 different sizes. And for each product and sizes, I need to put them in a room set file and then save it as a web file.

  or 10 products = 80 different web files.

  Each product to a particular size should be placed in the same area in the game room and have the same effect.

  For this, I have:

  1. create a bedroom set

  2. create models with sizes right for products to be included in the entire room (up to 8).

  3.I have created a series of actions for all sizes. Size of the image including the canvas size and export to a folder to have a layer for each product sizes.

  4.I need then to charge batteries to create a group and drag - move these files to the whole of the room.

  5 then I paste effects on all the layers in the group.

  6.I moved all layers in the right place, as a result of my models.

  So, I would avoid some steps of this... Because I have 100 products, so 800 files to create.

  If I can find a way to import (swap file one by one in the same place and sizes, she will avoid steps 3, 4 and 6, which will make my life much easier...)

  NB. Or remarks that helps...

  Hope this is not too complicated... and thank you for your help

  Jean

  If I understand correctly, you already have a common framework for all 100 products.

  For each product, you already have 8 image sizes to be placed in the parameter.

  If this is the case, the Variables can be the most convenient option that, once the model and tab delimited file are created, the placement of all the images of 800 would we automatic, accurate and extremely efficient both. Even if you work with images, I suggest rather than images and the type you watch the video and look at how it can be applied to your project.

  PS CS5 - working with Variables | The complete picture with Julieanne Kost. Adobe TV

• Order of 100 Mbps with the same policy map on different interfaces of service-policy in routers

  We have several different interfaces in our routers. On that note, we have service-air to limit the bandwidth of 100 Mbps.

  If we use a sheet of class corresponding to a list of access as "permit ip any any".

  and map political with the class-map to the police up to 100 Mbit/s.

  If we apply this policy plan in the form of service-policy interface. All interfaces that use this service policy would share 100 Mbps or will they get 100 Mbps each?

  Thanks for any response.

  Concerning

  Henrik

  Hello

  As you apply the policy by interface, each interface will get 100 MB

  HTH

• Video and image from same source, different size

  Hello world

  I took some pictures and a few videos today with an EOS650D as well to create a film in stop motion.

  I created a sequence based on the video files and added pictures. While the videos fill the full framework, images appear with a border to the left and to the right.

  How are the videos and images in a different size? What I did wrong or that you can do to fix this?

  Thank you very much!

  The images have a resolution different then video

  Video is usually 16:9 while the photos are of 3:2.

  Check the height and width of the two.

  FIX: the scale of the images upward (effect controls/movement)

• Cod app and library can be for different platform versions?

  I am writing an application that must run on a wide range of versions of the device. Some of the application contains code depending on the version, but a little is independent of the version. Are there problems or special considerations for structuring an application as a main .cod file compiled for a specific platform version and a .cod of library which contains functions of "lowest common denominator" compiled for, say, 4.2.1?

  What you propose works OK for us.

  The library is developed in a different project and workspace, the "interface" between the use of the application and the library is the jar file, which is imported into dependent projects.  This means that the two become completely independent, and it is possible to exchange the library for a later version on the device, without changing the main cod.

  The biggest problem is multiple applications with the same shared library requiring different versions of this library.  This section of the shared library has been discussed widely in the DevCon, so I hope that Rim will contribute to this requirement in some way in the future.

• Problems with same or different loadind & activation, on the purchase of a second laptop with platfor operation.

  question 1: this page says a single license for Photoshop CS6 can be activated on a second computer. It is unclear if one can have a different software on the second computer platform. In my case, my original activation is on a Windows 7 laptop, which got a software upgrade of Windows 10 and therefore the Photoshop CS6 is now working on Windows 10. Now I think to buy a second laptop, that can be an Apple, or it may be Windows base 10. Do I have the right to have the second installation on 10 Windows or Apple? Or the second laptop need only Windows?

  2nd question: If two laptops can be installed at the same time with my permit a driving Photoshop CS6, then I have to disable the 1st laptop before installing on the 2nd laptop? And in this case, if my 1st laptop is on Windows 10, can my laptop replacement are allowed to be window 10 or Apple?

  question 3: above must answer for my Lightroom 6 also.

  Could you provide these answers for me soon, please.

  My email address: [Email address removed by Moderator]. I am in Delhi, India. If you can direct me to a representative of your for help with the clarification above, let me know their contact phone numbers.

  with cs6, both computers must be pc or Mac.  You can exchange your pc license for mac license (and vice versa), an Adobe product for another language or version of trading platform

  Lightroom is a cross-dilated license so you can install on a pc and a mac (or 2 Mac or PC 2).

• First interpretation same Filetype differently

  I'm working on a MACPRO 2.66 GHz 6-Core Intel Xeon with 16 GB of RAM. I work on a fiber 10Gbe network connected to a main storage array and works on the CS6. I'm cutdowns podcasts weekly hourlong of creation and then export to the web. A description of my current workflow (simplified for troubleshooting purposes) is:

  1 ingest MP4 footage

  2. create a sequence requiring a nesting of the long hours of mulitple clips

  3 export sequence as a compressed mp4 extra change for youtube.

  Before today the final encoding took 1.5hours. Today the encoding takes 5 hours. I was check to see what is different and the only thing I came up with, it's that one of today's pictures files is imported as quicktime movie while the last time around the sequence has been imported as a mpeg movie. When you select the properties of the file of the week and last week in the first, it is indeed the case. In addition, the quicktime one is actually a "reference quicktime." There seems to be no way to get the creation of import another path. What I don't understand, is that the two files are approximately the same size (give or take a few minutes) and when you pull the info on files in VLC or Quicktime the two formats and parameters are the SAME. If the two questions I have are:

  1 could the fact that the first think that a single file, it's a quicktime be the reason why today the code was 5 times longer?

  2. what might be different about these two files that appear to be identical in format and wrapper?

  Thanks in advance for any ideas.

  -Josh

  Josh,

  Welcome to the forum.

  It's just a wild guess on my part, but unless I mixed things up, this is the QT reference, making the process more. This conjecture is PrPro is need to "fill in the blanks" on the reference file. Why, almost identical file would show MPEG and the other reference to QT, is a mystery to me.

  Also, I have a PC-boy, but work with a lot of outside contractors MOV files (hosts mainly 3D), but I specify Animation MOV and those that work very well.

  I hope others will have something useful for you, beyond my assumptions.

  Good luck

  Hunt

• compare 2 files for the same, but different

  I have 2 files TrueCrypt 7.1 Mac OS X.dmg and TrueCrypt 7.1 Mac OS X (2) the .dmg that compare with hash sha256 identical (04db58b737c05bb6b0b83f1cb37a29edec844b59ff223b9e213ee1f4e287f586) and compared with the help of the cmp command. The two compare properly.

  When I try to install 1 file I get the message "error truecrypt requires Mac OS X 10.4 or later", but the other recipes to install correctly. Why, if the files are the same?

  The problem was with the security and privacy settings. Because Truecrypt is not an application recognized by Apple, it concerned differently for one file on the other. I suspect because I had already tried to install the previous file.

• Passwords admin vs user: same or different?

  What is desirable or just paranoid to use two different passwords for user and Admin accounts? I prefer to use the same if it is just as safe (I guess that's for the most part). THX

  In the professional world, it is advisable to use two different passwords, or each account has its own. It is also advisable to change every 30 to 90 days. What is your strategy in your own home is to you alone, but it is advisable to have a password.

• How to get bookmarks on Aurora to be the same for different users on the same computer?

  When different users on my macbook login, I wan tehm all see the same configuration and saved bookmarks for Aurora. How can I do that. Trying to export from one setupproperly seemed to be the right thing to do. But when importing, there was too much here. the stuff of front and the news trying to be imported. He also made records duplicated with the same names. Is t he a profile simple file for bookmarks that can be exported and imported into the new area people.

  The profile is a file that store your personal information in a safe place

  • https://support.Mozilla.com/en-us/KB/profiles
  • here explain how to make a backup of https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information profile
  • here explain how to restore

  https://support.Mozilla.com/en-us/KB/recovering%20important%20data%20from%20an%20old%20Profile

• How to: same excel file, same computer, different user accounts.

  I'm trying to access a single Excel file from the accounts of different users on the same computer.  I tried to share the Excel file, no luck.  I studied with a group residential, but which seems to be for different computers on a network home.  It comes from the same computer, the same Excel file with multiple user access.  Help

  Thanks for your help.  I tried to implement your suggestion, and most of the time, it worked.

  I followed the path OS (C> users > Public > Public Documents and was able to copy the document it.)

  I have it pinned to the taskbar and managed to get it back and make & save changes.

  When I copied it initially the path mentioned previously it had an identical copy in the following path: > libraries > Documents > Public Documents.

  Unfortunately, when I used the button "Save" it would save the file to the location of a second, but the pinned file would go to the original OS (C... way, then recover the original unedited version.)  It took me a while to understand this.

  If I do something wrong and you have any other advice, I'd appreciate it.  But, for now, this issue has been resolved and I will so indicate.

  Thank you once again

  BG