SanDisk ultra II 480 GB ssd update for macbook pro 2009 (5.4)

Similar Questions

• Drive hard internal update for MacBook Pro Late 2011

  I want to update MacBook Pro (late 2011) to a SSD drive, but I do not have what to choose. I have my eye on 960 GB SATA III, but I don't know if it's ok to use a greater than 512 GB SSD and SATA III ok?

  Any advice would be appreciated. Thank you.

  Yes it's OK to use a size larger than 512 GB SSD, and Yes, SATA 3 is OK.

• Opening Word documents after update for macbook pro

  After agreeing to he more recent macbook pro update, all old and new word documents are open in a tiny window, I can't expand. I tried clicking on the corner and dragging - no luck. This mac told me that I am OS X Yosemite 10.10.5, Macbook bought 2010

  You didn't say what version of Microsoft Word, you use but can help the following: ck-small-and-wont-expand/bfd3fcd7-97bf-4e3d-998d-b5476bf2e83b?auth=1 http://answers.microsoft.com/en-us/mac/forum/macoffice2008-macword/word-view-stu

  If this does not help, you can ask a question in the Microsoft Office for Mac forum: http://answers.microsoft.com/en-us/mac

• Sierra update for MacBook Pro macOS

  What MacBook Pro models upgrade to Sierra?

  2010 and later versions.

• Updated 2011 MacBook Pro at El Capitan 10.11.4. At the opening of the Photos, he entered into mode 'Library Preparation', but was stuck at 50% complete for more than 30 minutes. What should I do?

  Updated 2011 MacBook Pro at El Capitan 10.11.4. At the opening of the Photos, he entered into mode 'Library Preparation', but was stuck at 50% complete for more than 30 minutes. What should I do?

  Give it time - it may take a few hours depending on the size of your library is

  LN

• After update for first Pro CC 2015.3 I can not move the values in the effect controls panel

  Hello!

  After update for Premiere Pro 2015.3 of CC, I can't change the value of the property in the effect controls panel by dragging left or right when you move the pointer over the underlined value. The two small arrows appear, but nothing happens when I drag them and it is so annoying. I tried now pressed the SHIFT key and several others trying to drag, but it makes no difference. I restarted the program and my computer but still no difference. All the patches?

  Thank you!

  

  Hello Ann,.

  I found the problem, it's my wacomtablet. When I use the magic mouse, it works great! So, I guess I should update the wacomdriver, perhaps. If your response gave me the idea to check for this. Thank you!

• How can I get the serial number for update for first pro cs4 4.2.1, one provided with the product does not work.

  How can I get the serial number for update for first pro cs4 4.2.1, one provided with the product does not work?

  You don't need a serial nr for updating a program

  You need the original CS4.0. install and add the series nr. to get the program to work.

  Now you can update to 4.2.1

• I've just updated for Premiere Pro CC 2014 and it does not start

  I've just updated for Premiere Pro CC 2014, and now I see an error message saying: he cannot find capable games modules. I updated the driver for my graphics (over-pants) card and tried running as Administrator without change. I'm under fire amd control center pro, which does not have the parameters of speed that is suggested for this problem. For some reason, the original first Pro CC can still open (thankfully). I looked at this problem the support page and it's listed, but when I click the link it redirects me to the beginning of the troubleshooting questions. I hope that there is an answer for letting me use the latest version of first!

  [go to Premiere Pro... JTS]

  

  Same thing here! Screen attached. I'm running the latest MBP with plug max. Anyone it @ Adobe...?

  UPDATE *-it's pretty easy to fix yourself. Just follow these instructions on Creative Cow: Re: problems starting CC 2014: Adobe Premiere Pro

• release notes for December 2013 update for Flash Pro CC

  Hello Adobe.

  Where are the release notes for the December 2013 update for Flash Pro CC? I just found this http://helpx.adobe.com/flash/release-note/release-notes-flash-pro-cc.html with just "contains critical bugfixes. What is? Do I need? They are my observations so that you don't want to tell people?

  HI infeter,

  The following hotfixes were made in December update - #13.1.0.226

  (1) multiline error correction are not reported in the Flash for Flash Builder workflow

  (2) AIR for the Android user interface dialog box: sharing of deployment DURATION and emulator options under deployment section gets activated on AIR4.0 SDK added. This should not be enabled because we don't support not shared length of 3.9 AIR go.

  Also, certain checks zero have been added to establish registers of accidents reported accidents.

  Thank you

  -Reynaud

• MacBook Pro 2009 with slow SSD on El Capitan

  Hi all

  I recently put on the upgrade to El Capitan of Mountain Lion, that my Macbook Pro 2009, updated with a crucial v4 SSD and 8 GB ram, was very happy.

  Had a very difficult installation that hung a few times, but finally got it set up after resetting the PRAM.

  Since he has been very, very slow - beachball right turns and towers - opening an application are a 5 minute job. Printing takes 10. The SATAII connection shows as being to 3 GB, so it should be good. Any other El Capitan on a 2009 MBP running seem happy with it. I activated the trim, it made no difference.

  I was not able to find someone else in line with the same config or problem, so grateful if someone has experience - I was wondering if it is worth getting an SSD different, or even the original HDD back in?

  Thank you!

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Could not import the 5S for macbook pro

  Since the last update of my 5s, two days ago I can no longer import pictures for macbook pro.

  "Pictures in the film"the ___ iphone cannot be imported because the device is locked with a password"but it is not."  Can and would someone please help. "Thanks I also:" iTunes could not connect to the iphone '-iPhone "because an invalid response was received from the device.

  On the phone, try pressing these buttons at the same time for at least ten seconds, until the Apple logo appear: the sleep/wake button and the Home button. On Mac, it just reboot and then try again.

• Updated the MacBook Pro to ElCapita to Apple's Service. Now cannot restore last July 7 from Time Machine backup. Help, please.

  Updated the MacBook Pro to ElCapita to Apple's Service. Now cannot restore last July 7 from Time Machine backup. Help, please.

  Visit Time Machine FAQ of Pondini helps with Time Machine. It is a vast site with almost everything that you need for using Time Machine. You will not find a better resource for Time Machine in one place. Due to the disappearance of James Pondini is the site is no longer updated. Therefore, some information may be somewhat outdated.

• MacBook pro 2009 with new SSD try to clean install Yosemite or TM disaster restoration.

  Hello.

  I think this is going to be a difficult discussion.

  Unibody MacBook Pro 2009. Original Apple HDD with Yosemite 10.10.5.

  Two months ago, that my HARD disk is dead.

  I installed a new SATA II Toshiba 1 TB HARD drive and through the recovery of TM all went well.

  A couple of weeks, my 'new' SATA II Toshiba 1 TB HDD started to scratch a little (I mean literally zero while reading/writing), so I thought he would die soon again. This time, I decided to buy an SSD in order to have better performance and superior durability.

  So I bought a Toshiba 248 Gb SSD. I'm not a big fan of Toshiba, but where I live, it's the SSD only I found in the store.

  I removed the old HDD, I installed the new SSD and where my nightmare starts.

  First of all, I tried with a new Installation of USB from Yosemite. I followed all the passages and the installation completed in about 9 days. Yes you read that right: 9 days. The progress bar runs for 9 DAYS.

  At the beginning I obviously interrupted the first couple of facilities when the progress bar was like "12 minutes at the end" for three or four hours, but then I read in many articles and support threads that it is quite usual installation seeks stuck for hours or days, but if you open the log console computer is always something. So I gave him his time and the third or the fourth installation I waited my NINE DAYS to be finished.

  Then when the installation ended the restarted mac of himself and is stuck at the loading screen with his beautiful Apple and the progress bar frozen at about 50%.

  I froze for about 4 or 5 hours of average.

  I found a few articles that sometimes happens, and all you have to do is to force the computer to shut down and start again. So I tried to force the shutdown by holding down the power button and after the reboot it just keeps starting with and stuck at first infinite progress bar.

  So I reboot on CMD + R to get a clue, if I got in trouble on the SSD or what. I run disk utility and found that on my SSD were about 290,000 files and many files as the Yosemite was finally installed. I tried to check the permissions, but it says less than a minute and then got stuck at halfway to complete 15 minutes, so I stopped it.

  After that I think 4 or 5 attempts to start new fresh install on my Yosemite and clean, I reset the SSD erase decided to start all over again.

  I died a little inside while doing it. Same as the erasure was so f * king quick to finish! (about 50 seconds, sonofa 'byte').

  Then I tried to not reinstall Yosemite again (the nightmare of 9 DAYS still has me) but I have tried a new way: recovery of TM.

  Just to say my original TM backup was about 340 GB and my new SSD is 248 only while it was quite clear he wasn't.

  I connect my external TM drive to another computer and I worked the ' delete all backups of * file * ' to get a smaller backup TM.

  Now, I moved a lot of things outside the TM backup and the new dimension of the TM backup is about 90 GB (I want to say that the whole folder backups.backup is about 90 GB), in fact I moved the other stuff was also inside the external Western Digital drive and is now free space Go 910 (, hence the content of the WD is just the TM backup folder this weight about 90 GB), but I still have the 'this drive doesn't have enough space to restore your system.', it's totally A LIE.

  Never mind. I accepted the idea that sometimes even computers are ashamed of themselves and begin to tell lies. I can handle. There was a holy man in the history without any sin. So, ok, no problem. I'm not upset or anything. I can get over it (mf you little liar!).

  Think of manually restore the files that I needed once I have a BONE in my new SSD, I used the same external disk to create a new backup from another computer, my Mac Mini TM. Everything went well and I got a new Mac Mini TM backup about 60 GB (it's much less than 248 GB of my new SSD).

  I reboot the Macbook again to try to restore the backup, Time Machine of Mac Mini and everything seems to work, except for:

  -progress initially said about 650 hours needed to complete the restoration ago.

  -I went to sleep and let the machine itself working together on the restoration and when I woke up this morning I found that the rest of the time was "fair" 52 hours.

  -J' was a little happy to see this, until the Rainbow rolling ball appears. Everything got stuck again. I force shutdown and then try to restore it.

  Now it works again and the remaining time is close hours 672 (and growing). I'll give it another chance. We'll see.

  Now, I have four questions to ask you:

  1. you have an idea (with the exception of a curse or a matter of black magic) WHY all this happened? And of course if there is something wrong and I can work to fix it otherwise?

  2 are there special settings to enable/disable/configuration/whatever to create works faster still to understand that it doesn't properly before discovering this NINE DAYS or 672 HOURS right now?

  3. when we agreed that something like that was acceptable? I used to be a project leader in the world of ICT and in 20 years I NEVER, I say NEVER, released a product/app/site Internet/solution that considers that an option taken 9 DAYS to install or something like that. NEVER. Do not forget that we are talking about Apple and an operating system. I think Windows is laughingly taking revenge.

  4. do you think that for me it is time to let Apple and go back WIN + PC? It's quite frustrating and I use the computer to WORK, not to play games video and this is not the kind of operativity expect after paying a little more for material, a little more for software, a little more to be part of what it is supposed to be the one that had the best choice (index not be not it kills me).

  I thank in advance for any help/tip, you can provide.

  Alberto

  This is a fairly long post. What I would say is:

  1. the next time get a hard drive from a company with a good reputation like Samsung (best SSD ever, I have several internal parts and a laptop EVO). I get them shipped.

  2. as you use the Mini, the recovery partition allows you to install a new copy of Mac OS X, and then use the Migration Wizard to move your stuff.

• how spyware & best for macbook pro antivirus software

  e-mail account hacked. possibly get password spyware or virus vi somehow, I downloaded on my Mac. What is best spyware / virus scan software for MacBook Pro (El Capitan 10.11.5 running OS X version)

  What makes you think that you have been 'hacked '?

  Download and run MalwareBytes. Malwarebytes was developed by one of our colleagues here to ASC. He received rave reviews and is on the more proven anti-malware for Mac software.

  There are no viruses that can attack Mac.OS X. For example, anti-virus programs are selling a cure for a disease that does not exist. And they are known for the Mac was systems.

  A Mac peut picking up malware, but not if you just use common sense. Really need to actively invite some malware in for making it happen. This means that download and knowingly give your password for it to download. Mac offers all the protection you need with SIP (Protection of the integrity of the system). I have on the Protection of the integrity of system on your Mac - Apple Support

  If you happen to download adware, you can use MalwareBytes to get rid of it. Malwarebytes was developed by one of our colleagues here to ASC. He received rave reviews and is on the more proven anti-malware for Mac software. If you use torrents, don't. Torrents are a good way to pick up malware because something can to hitchhike in on a download.

  Safari pop ups are different and easier to deal with. In Safari 9.1 and later simply close the window. For previous versions force quit and hold the SHIFT key while restarting Safari.

  https://support.Apple.com/en-us/HT203987

  Finally, away from programs that are intended to «clean your Mac» They can do damage to your system. Your Mac should any in the first place of cleaning. Any necessary cleanup is systematically supported by OS X.

• Where can I find Keynote v6.5, for Macbook Pro?

  Where can I find Keynote v6.5, for Macbook Pro?

  The Mac App Store has only the latest version of any application. The only way to install an earlier version of Mac App Store apps is so if you have a backup on the Mac, another Mac or a separate disk file.