Error system 1355: "Error_no_such_domain".

Similar Questions

• KB2536276 - Windows XP PC getting "error system 58" when you do a net view \ the SMB server disks

  Since the update of security Windows KB2536276 has been loaded on Windows XP SP3 PC on our network of customers, they

  could not map network drives to unix SCO SMB servers 'Samba' software file sharing.  When they run the DOS command

  net view \ is returned an error 'error system 58'.

  The problem cannot be resolved by deleting the KB2536276 update, restart the PC and then the command net view runs correctly.

  We need either this patch to be fixed and re-issued or have a method of prevention the patch re-loading

  Thank you

  David Spellman

  See

  https://Bugzilla.Samba.org/show_bug.cgi?id=8238

  It is a bug in Samba. You can find a patch under

  https://Bugzilla.Samba.org/attachment.cgi?id=6593

  Please be aware that this only occurs if you use plain text passwords which are strongly not recommended for ages in Samba.

  Hope that helps,

  Volker

• Stop: c0000021a {ERROR SYSTEM parts ONLY}

  Original title: fatal system error

  My computer that uses Windows XP 32-bit operating system, repeatedly recycled the following message appears during startup:

  Stop: c0000021a {ERROR SYSTEM parts ONLY}
  The process ended unexpectedly with the State Opening Session Manager system
  0xc000026c (0x00000000 0x00000000). The system stopped.

  The message above is displayed as soon as the computer restarts again and repeat the cycle as long as it's on. Can someone tell me what is happening and if there is what I can do to alleviate this problem?

  If you see a message like this:

  STOP: c000021a {fatal system error}
  The Session Manager initialization system process ended unexpectedly with the State 0xc000026c (0x00000000 0x00000000).
  The system has been shut down.

  It is usually not too difficult to solve the problem, but some answers will make things go more smoothly...

  Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

  Please provide additional information on your system:

  What is your system brand and model?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If the system works, what do you think might have changed since the last time it did not work properly?

• I am facing a problem with the POWER of ODIN 9.1.0.5, my broker is Indiainfoline, my OS is Vista ultimate, when I login, everytime I get an error 'System Error (10055) (setsockopt)'.

  I am facing a problem with the POWER of ODIN 9.1.0.5, my broker is Indiainfoline, my OS is Vista ultimate, when I login, everytime I get an error 'System Error (10055) (setsockopt)'.

  Check out these links:

  System (10055) error (setsockopt) Solution
  http://www.win7heads.com/software/82898-system-error-10055-setsockopt-solution.html

  ODIN request does not work Windows 7
  http://social.technet.Microsoft.com/forums/en/w7itproappcompat/thread/ddbe30c8-f4c6-4B8F-ac91-85aa07191ea3

• Cannot install paintnet 3.5. It gives an error "system of e/s file not found exceptions could not load file."

  Original title: uninstalled paintnet3.5 now impossible to reinstall download

  "downloaded the file and open it to install gives this error :-systemi/o file not found exceptions could not load file or Assembly of base of the version3.0.0.0 culture = neutral public key token = 31bf3856ad364e35' or one of its dependencies, the system cannot find specified file base name of the 3.0.0.0 - batch version of gibberish between - then" AVT Assembly binding logging is disabled to allow to link failure check the registry value (hklm\software\microsoft\fusion\enablelog (c word) 1 IAM onwindows vista service pack2 version6 and ihavent a clue unless something has been lost in my recent wave of attacks of malware bullguard - computer reports now clean-i do not know how to access the files of basic trends are not listed as installed programs

  Hi Bernie, 78,.
   
  I suggest that you follow these steps and check if it helps.
   
  Step 1:
   
  Right-click on the setup.exe file and run as administrator and check.
   
  Step 2:
   
  I suggest that make you the SFC scan on your machine like a system file is damaged or missing. Scan SFC repairs and tries to retrieve system files.
   
  Step 3:
   
  I am not quite sure if the malware is flushed out of your system. I wish that you run a scan complete of your security again software or run a line scan using the link below.
  http://www.Microsoft.com/security/malwareremove/default.aspx
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Computer laptop Gateway does not load windows Vista, reads configuration data read error: System.

  OK a friend knows me to fix his laptop. Apparently what she was experiencing major problems, so he erased the disc and tried to reinstall Win Vista from disk. Will not work. I can get to where you can choose a partition to install the operating system to, and it says: Windows cannot find a system volume that meets its criteria for installation. My friend says he has just tried, form disassemble the computer an audit of all the parties to try ALL the different options during installation, as well as the options for the BIOS. Any ideas people? Here are the approximate specifications, because the owner has not been able to get the computer working for awhile:
  4 GHz, 4 GB RAM computer Gateway laptop, 2006, Phoenix TrustedCore, and a string of other interesting info that appears on the first screen of the error:

  9D.03 BIOS version

  632K RAM passed system
  3966M extended RAM passed
  1024 KB of L2 Cache
  System BIOS with a shadow
  Video BIOS with a shadow
  ATAPI CD-ROM: Optiarc DVD RW AD-7563 has
  Fixed disk 0: WDC WD2500BEVS-26VATO
  Initialized the mouse
  Updated System Configuration data
  ERROR
  System Configuration data read error.

  I'm not very tech savy and I'm not the owner of the PC, so I don't know all about it so go easy on me :).

  If your friend tried to reinstall Windows by using the defined gateway recovery disc (and this is the best way) and this recovery fails, the laptop has hardware problems. Disassemble laptops is a fickle business at best and while it sounds like the hardware problems started before your friend did this, it may have put the nails in the coffin of the laptop to take apart.

  At this point, you can try troubleshooting hardware or your friend can take the laptop to a competent professional (not a type of BigComputerStore/GeekSquad of the place). However, if the laptop has had hard use, your friend must remember that a cell of 4 years with major hardware problems probably won't be cost effective to repair.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot MS - MVP - Elephant Boy computers - don't panic!

• Error System Recovery Options while trying to install Windows 7 on your laptop white (without os)

  I bought a Toshiba laptop satellite c55-c-174 with no OS on it. Downloaded Windows 7 from msdnaa and bootable usb drive created with PowerISO. Had a lot of trouble with the usb as a boot recognition, but then I changed the boot order to usb is just after the drive hard (i.e. second). Also in the configuration system changed boot at CSM Boot Mode. And it's system BIOS version 5.10.

  Finally, he started installation, but found no drivers. So I tried Startup Repair option. Didn't fix it, just at the point where I tried to access the repair your computer option again it says error System Recovery Options: this version of system recovery options is not compatible with the version of windows that you want to repair. Try to use a recovery disc that is compatible with this version of windows.

  Someone has the power to deal with this?

  Thanks in advance.

  ISO power not recommended to bootable media.  The prompt for drivers almost always means that the media is bad, because all modern SATA drivers are in the installation media.

  I create flash support using Rufus for UEFI/GPT, then start using only the Key of the BIOS Boot Menu.  Choose the UEFI version to the flash stick, then custom Setup, remove all partitions until the space unallocated click beside the AutoShape and start.

  If you have changed all the UEFI BIOS configuration settings, set them in the UEFI firstly, turn off Secure Boot, CSM disabled, Windows Boot Manager set first to start.  If, in case of doubt poster of photos of back and we will help you sort the parameters correctly.  It would be good also update the UEFI firmware like this can matter.

  All this is covered and much more still to ensure a perfect clean reinstall Windows 7

  For all other problems see resolve the failures of Installation Windows 7

• As soon as the notebook starts up, it gives an error "system BIOS with a shadow.

  Now every time I start up computer laptop I get the error system BIOS shadowed...

  I HAVE SAMSUNG NOTEBOOK R439

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  Usually, this message appears when there is no corruption in the CMOS battery or if the BIOS driver is either corrupted or not updated.

  Please try this step below:

  1. stop your computer.

  2. Disconnect all sources of power (battery and adapter).

  4. now press the power for 30 seconds without interruption.

  5. then insert the battery / and or adapter and start up the computer and check.

  If that doesn't work, try updating the BIOS of your computer manufacturer drivers.

  Let us know if you need more assistance. We will be happy to help you.

  _______________

  Thank you best regards &,.

  Isha Soni

• Backup has encountered a problem during backup of the C:\windows\system32\config\systemprofile\Desktop\music file. Error: (System does not find the specified path. (0 x 80070003))

  I had to uninstall iTunes a few months ago and successfully re-installed, but part of my music was missing.   At one point, following the instructions on a thread on the forums Apple or Microsoft, I saved my music library on the desktop. Since then, I do not have a library of music on the desktop file.  In my looooooong hours trying to fix things, I do not know if I deleted it or what.

  Now, I get the message:

  "Backup has encountered a problem during backup of the C:\windows\system32\config\systemprofile\Desktop\music file. Error: (System does not find the specified path. (0 x 8007003)) "whenever I have backup my computer.

  As I understand it, that does not affect really any other files, they rely on the spot (I think), but

  HOW CAN I GET RID OF THIS MESSAGE? or what is the cause?  Of course, I could use help in simple English, step by step, as I'm not very techno...

  Thank you!!!

  Try to be...

  SereneJulie

  Hi serene,

  Thanks for posting your query on the Microsoft Community.

  As indicated by the error, this problem appears, when these files/libraries that are saved automatically are not present on your computer. I suggest you to follow the steps below and check, if it can help solve the problem.

  • Create missing files that are listed in the error message.
  • Exclude files from the files to backup in the backup settings and then include these files in their original location. To exclude folders in other communities and to include these files in the original location, follow these steps:
    1. In Control Panel, open backup and restore.
    2. In the section back up , click change settings.
    3. In the dialog box Configure the backup , click Next.
    4. In the dialog box that you want to save , click Let me choose, and then click Next.
    5. Expand data files, library, expand additional locations, and then click to clear the check boxes folder AppData, Contactsand Research .
    6. Expand computers, expand the element of your system drive (for example, expand Local disk (c)), expand users, , and then click to select the checkboxes AppData, Contactsand Research if they exist.
    7. Click Next, and then click Save settings and exit.
    8. Backup and restore, click back up now to perform a new backup. The backup operation must complete without errors.

  If the problem persists, I suggest you follow the steps in the following article for troubleshooting backup problems.

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors

  http://support.Microsoft.com/kb/973455/en-us

  Come back and let us know the State of the question, we will be happy to help you. We, at tender Microsoft to excellence.

• Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Dropbox\Camera file will be mailed. Error: (System does not find the specified path. (0 x 80070003))

  This is the error message I get after several days of decline in dropbox, my Norton, saying that he was sure loading! I have read and re read most of what people have written, and I have no idea! I'm not a person irritable and can someone put in easy terms what should I do to solve this problem! I read try it who try and read that nothing works. Does anyone know if something works and can it tell me please. Also if someone from Microsoft is reading this why not have you solved this problem?

  Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Dropbox\Camera file will be mailed. Error: (System does not find the specified path. (0 x 80070003))

  Hello

  You did changes to the computer before the show?

  These problems occur because the folders or libraries that you are trying to back up or restore include a reparse point. Analytical points are similar to shortcuts Windows or Unix symbolic links. A point of analysis can be used to point to a file that is moved temporarily to a different drive.

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors
  http://support.Microsoft.com/kb/973455/en-us

  I hope this helps. Let us know if you have other problems with Windows in the future.

• receive a boot error @system - 8.1 Win, 64 - bit

  receive a boot error @system - 8.1 Win, 64 - bit

  I started getting an error at startup of the system-

  updaterstartuputility.exe - generates an error

  point to a problem with -.

  c:\Program files (x 86) \common files\adobe\adobegcclient\adobegcclientupdater.dll

  (condensed verbiage) said this may be caused by the application that is not designed for windows or another error.  try to uninstall and reinstall.

  What product / program is this and what needs to be uninstalled and reinstalled/downloaded?

  apparently the .dll file above has been updated on 25/11/2015.  This coincides with the start of the error.

  BTW - what is GCCLIENT?

  Hi Js1209500,

  Please refer to the thread below, similar has been discussed there:

  What is AdobeGCClient.exe?

  Error: Client Application to Adobe GC works nicht mehr

  Let us know if that helps.

• Satellite Pro L20: Configfree Setup error - system only is not supported

  I tried to update the Configfree with a version more recent on the Toshiba support (for PRO L20 series) site.

  Setup uninstall me the old version and after that it me to say that "the system is not supported.

  How to recover or reinstall my Configfree without using the recovery CD.

  Thank you

  I m wondering if you used the right and compatible ConfigFree Utility.
  It seems you didn t, and so this error message occurred.

  > How to recover or reinstall my Configfree without using the recovery CD.
  I don t think you will be able to reinstall it from the recovery CD without having to install the entire operating system because you will find on the only recovery CD image file. That's why it of not possible to extract individual files, the image of Toshiba programs.

  If you n t want to reinstall the whole OS using the recovery CD, then you can try putting the BONE to this early time by using the System Restore tool.

  Check it out!

  Ciao

• Utility error system image creating NetRestore Image 2

  Hello

  I s 2 constant error trying to create a picture of NBI NetRestore using System Image Utility 2 (Version 10.11.2 (778)).

  NetBoot and NetInstall work without error, but NetRestore won't quite work. The iMac I use is in target mode and mounted on a 10.11 Mac OS Server.

  This used to work wonderfully in Yosemite, but now it is a total nightmare...

  What I'm missing here?

  Thanks for any help...

  DD

  iMac, retina 5K 27 "end 2014

  The first thing you can do is set the verbose logging level. This will allow you to understand which tool (probably hdiutil) generated the error.

  If you only have problems in making images of existing volumes, I would start by checking the integrity of the volume with utility disk or another tool.

• Intel attom: fatal error system halt bios password

  Interrupted system fatal error from the bios password HP mini 110 c-1001NR fail help pleas CNU9364JQP

  Hello
  
  Try: e9lofgvw52
  
  all are lowercase letters
  
  third letter is small case L
  fourth letter is small case O
  
  Concerning
  
  Visruth

• HP mini 110: HP mini 110, fatal error system stopped

  Hi, I was not on my computer Hp mini 110 for about a year and when I turn it on, it flashes all these words and numbers on BIOs for about 1 second.

  When I press f10 , nothing happens. He immediately goes to me for password enter CURRENT 3 times. Once I tried to type the password for 3 times, it is said: password check failed, fatal error... System stopped, CNU938BH26.

  I even tried to take out the battery for 5 minutes and put again, no luck.

  PLS HELP SOMEONE!

  At the password prompt try > e9lofupz7g