Sansa Veiw preset songs

Similar Questions

• Sansa Fuze Skip Song

  1 month ago I bought a Sansa Fuze 4 GB, and I really liked it.  In that first month, I transferred music from Microsoft Media Player for the "rocket" with no problems and I also played music without any problem, so I see no problem.  Everything seemed to be working great until last night when I installed the new firmware.

  I installed the new firmware using the request for the Installation of the Firmware Sansa. After installing the new firmware, I had to Resync my library.  I noticed after the resynchronization when I played music, many songs on the "rocket" should be ignored.  For example, I would play the ABC song after song what ABC ended, I see the image of the song DEF, but song THAT DEF would not play and the "rocket" would skip to the next song HIG.  If I tried to navigate back to the song (DEF), which was initially ignored, should be displayed, but the "rocket" would skip to the next song HIG.

  If I tried to navigate directly to the song ignored interface of rocket, the song wouldn't play.  Artist ZYX has several songs in their folder.  If I chose to play all the songs of this specific artist, the "rocket" would skip infinitely without playing any music.

  Also, after I updated the firmware, I noticed all my music was removed from the "rocket" and my GoList was empty.

  Does anyone have recommendations on how to solve these problems?

  Update

  I tried the "rocket" by sliding the spring power switch on the side to the top as if you turn on the device, but hold position for 20-30 seconds as described here http://forums.sandisk.com/sansa/board/message?board.id=sansafuse&thread.id=44242, but he did not rest.

  Thank you

  BarDev

  Thanks for the suggestions.

  I have connected the "rocket" to my computer and was able to play a song on my computer from the "rocket" which was previous fried.

  I formatted the disk.  After formatting the drive, I resynced the "rocket" Media Player.  Now, everything seems to work.

  Thanks for the help.

  BarDev

• Sansa Fuze cut songs

  Yesterday, as I noticed a problem with my Sansa Fuze. When I'm listening mp3 songs and increase the volume above some Sansa point (about 3/4 of the maximum volume) begins to cut songs (2 seconds of silence - 1 or 2 seconds of music - 2 seconds of silence...). I change latest firmeware, and it did not help. Maybe someone has the same problem or have some tips what to do in this situation?

  I found a solution - he wasn't jack inserted entarely (really strange behavior).

• Songs appear on the computer but not on sansa

  I fixed the tags on several songs using Mp3tag and then transferred to my sansa using windows media player, and he showed all was fine and that they were now on my sansa, but when I unplugged my sansa to play songs that were not on the player. All the songs are correctlly tag in ID3v2.3 and most have a bitrate of 192, if only the effects any what. Help, please!

  Try MSC mode (under Settings/USB mode) and transfer in this way, simply by drag-and - drop from your computer to the Sansa. Windows Media Player has lots of ways to ruin things, and if MSC works, which will tell you if it is a problem WMP.

• Connect with other Sansa Sansa

  I have possible reading of this ir to connect two Sansa and transfer songs, pictures, is this true?

  Lol even when the Sansa Connect had their full WiFi capabilities (compared to the limited series that I told you about in your last thread), they were not able to communicate directly with each other, only to see what Yahoo 'friends' have been listening to or recommend through Yahoo servers.

  As I mentioned earlier, the Sansa Connect can now ONLY receive audio streams Launchcast and see photos from Flickr.

• Clip + Double downloads

  Big problems; Maybe someone can help.

  When I download, even if everything looks OK on my screen of Rhapsody, once that I disconnect my Sansa Clip +, each song actually was written twice.  In addition, all previous songs on my music video were crushed and replaced by the new songs (although again, there is no evidence of this on before Rhapsody to disconnect).

  Clip is a new unit of Christmas.  Everything seemed normal until the battery ran down the first time.  After reconnecting to a USB for charging, my Clip + locked up and I had to reset by pressing power for 15 seconds (as described in the manual).  Since then, everything is out of whack.

  Suggestions?

  Is it possible that you have a SD card in the Clip +, and you have transferred the same titles he?  If you have two copies of a song, the version of the internal memory will be list, then the version of the card.

  If there is a card installed, try removing and allowing the database to refresh on the Clip +.  Looking for names duplicated on the device.  In view of songs, tracks on the SD card will have a small icon of the card beside them.

  If you connect in MSC mode, then you can try to delete the file mtable.sys of the Clip + (only visible when it is connected in MSC mode).  This is the datsbase file.  When the Clip is offline, the file will be built from scratch by the Sansa.

  Don't forget to reset the device in MTP mode again to Rhapsody.

  If you have duplicates, you can try formattting the Clip +.  Use the command to the device for the built-in Format, settings > system settings > Format > Yes.  This erases all the materials for the device.  So try retransferring your tracks from Rhapsody.

  µsansa

• Audio jack play and pause/stop when you press the various buttons

  Hi all

  I do a simple radio interface and I have 6 buttons which I want to have that specific preset song playing of the button located in the library screening and stop/pause the current song when you press any preset button.

  I tried to use the attachSound, with associated identifiers but don't know if it's the right way to go. He plays songs, but does not stop their...

  {mc_FM1preset1.onRelease = Function ()}
  {if(!this.) Toggle)}
  this.gotoAndStop ("release");
  radio_FM1. Text = FM1preset1
  FM1value = 1
  
  PlayFM1_1 = new Sound (this);
  PlayFM1_1.attachSound (FM1preset1_song);
  PlayFM1_1.start (0, 1);
  
  PlayFM1_6.pause;
  PlayFM1_5.pause;
  PlayFM1_4.pause;
  PlayFM1_3.pause;
  PlayFM1_2.pause;
  
  }
  }

  
  }
  {mc_FM1preset2.onRelease = Function ()}
  {if(!this.) Toggle)}
  this.gotoAndStop ("release");
  radio_FM1. Text = FM1preset2
  FM1value = 2
  
  PlayFM1_2 = new Sound (this);
  PlayFM1_2.attachSound (FM1preset2_song);
  PlayFM1_2.start (0, 1);
  
  PlayFM1_6.pause;
  PlayFM1_5.pause;
  PlayFM1_4.pause;
  PlayFM1_3.pause;
  PlayFM1_1.unload;
  
  }
  }

  then I tried just to put each piece in its own clip and using this code, but it still doesn't stop/pause the song.

  Stop();

  {mc_preset1.onRelease = Function ()}
  mc_song1. Play();
  mc_song2. Stop();
  }

  
  {mc_preset2.onRelease = Function ()}
  mc_song2. Play();
  mc_song1. Stop (1);
  }

  Does anyone have any suggestions? Any help would be great! Thank you!!!

  Basically, I just need to know how to do the supported mc or button to STOP / to PAUSE the song that plays

  Thank you!!!

  -PAt

  the sound class has no property of break.  It has a stop() method, you must use:

  {mc_FM1preset1.onRelease = Function ()}
  {if(!this.) Toggle)}
  this.gotoAndStop ("release");
  radio_FM1. Text = FM1preset1
  FM1value = 1
         
  PlayFM1_1 = new Sound (this);

  
  PlayFM1_1.attachSound (FM1preset1_song);
  PlayFM1_1.start (0, 1);
         
  PlayFM1_6.stop ();
  PlayFM1_5.stop ();  etc.
  PlayFM1_4.pause;
  PlayFM1_3.pause;
  PlayFM1_2.pause;
         
  }
  }

  }
  {mc_FM1preset2.onRelease = Function ()}
  {if(!this.) Toggle)}
  this.gotoAndStop ("release");
  radio_FM1. Text = FM1preset2
  FM1value = 2
         
  PlayFM1_2 = new Sound (this);
  PlayFM1_2.attachSound (FM1preset2_song);
  PlayFM1_2.start (0, 1);
         
  PlayFM1_6.pause;
  PlayFM1_5.pause;
  PlayFM1_4.pause;
  PlayFM1_3.pause;
  PlayFM1_1.unload;
         
  }
  }

• Can not record songs on a Sansa Clip +.

  I recently bought the Sansa Clip + and it has firmware version V01.01.05F and the song rate feature doesn't seem to work. I choose 1-5 stars and select the choice, but the note is not saved. Another poster asked a similar question and its solution involved affecting USB MTP mode, but this has not worked for me. Any suggestions?

  Thank you

  OK I thought about it, the new firmware fixed this problem for me.

• Sansa Clip Zip battery does not charge, goes directly to the screen of the song

  It's my third Sansa MP3 players.  The first was a Sansa Fuze with the round button.  Like that one but my husband needed more that I did it I gave it to him.  He is old, but the player is still so today.

  The second was a Sansa Fuze + with the touchpad.  The touchpad has been way too sensitive but I need to play only two songs for sleep therapy while I was fine with it until the battery suddenly stopped charging a few months ago, I posted my problems in the Sansa Fuze + forum.  After trying a few suggestions, I finally accepted that he was a Goner.

  I bought this Sansa Clip Zip 4 G, thinking that should last at least for a while because I use every day.  In fact, I needed only when I had disorders of sleep during the night;  I probably used it once every two weeks or more.  I used my cell phone to the device, had no problems until now.

  The last time that I loaded it was 2 weeks, to 98% full - the thing never indicated 100% while it was a little weird.  In any case, I had problems sleeping two nights ago so I took out the Clip Zip and noticed that the battery still had plenty of juice left.  This morning I checked the battery, he had 68%, but I thought I needed could again tonight so better it load up, just in case where.

  I connected it to my computer, but it did not show "connected" screen  Instead, he went straight to the last song I listened to.  I thought it was weird so I turned off the player then tried again.  Of course, he went directly to the screen of the song.  I noticed that the battery icon was showing 'filler '.  I thought that if I left it connected to the pc long enough IT would eventually deducted.  Two hours later, I checked the computer and it says that the drive battery was dangerously low.  I disconnected and then reconnected and this time he said 98% charged.  I loaded a bit more just in case so I used the player for about 15 minutes and the player turns off.  Plugged into the pc and now it says battery is extremely low, while the last hours do not charge the battery, but it drains pretty!

  My last attempt was to plug into a wall charger and guess what?  He went directly to the screen of the song once again.  Contrary to connect to the computer, I could actually turn off the player but this way does not charge the battery, or.   It's exactly the same problem as my second player, the Sansa Fuze +.

  I bought the last two players from Sansa, simply because I really liked the first which of course had been abandoned a long time ago.  I don't know if I have bad luck or it is just an issue joint Sansa players but one way or the other I don't buy any Sansa more in the future.  He is a big name that comes with the big disappointment!

  You can also try a reset by pressing and hold the power button for 20-30 seconds. Release it and then turn it on normally and see how it behaves.

  By your description of the message "dangerously low" you get then plug it into your computer, which tells me that you use MTP mode on the player (or default automatic default, MTP). MTP mode can be pretty weird; better to use MSC mode unless you have need to PSG for "protected" content or DRM files such as Rhapsody or audio in your library or Audible books. The small "crirically" message is a bug in Windows 7 (using MTP mode) that Microsoft did not consider important enough to fix.

• Pouvez Sansa e200 series play/sorting songs based on records

  As you know, when you play music, the songs are sorted by artists/albums/songs/genres, why not records?

  Sometimes I put some songs in one folder, like 'rap songs', 'songs of jazz', 'my pop music' etc. I don't want to edit all the info of ID1/2/3 songs, just to play them, E200 Series can do, but some other MP3 players have this function.

  Can Sansa has this feature in the next update of the firmware?

  in any case, thanks to all

• Sansa Fuze 4 GB will not play songs in folders?

  I took songs that were an artist and put it in a folder which will be organized, but they do not play. Why?

  How can I fix?

  Thank you in advance!

  SANSAS does not read, display, research, reading of files! You can "arrange" their good sound in some folders that you want to, but they will only use the information contained in the ID3tags for sorting in the Player menu.

  BTW, this is probably one of the most hotly discussed on this forum. If you spent even 5 minutes before you posted your question or read Guide the user looking around, probably would have stumbled you on one of the threads a lot, several pages on the cases against the tags and discovered this.

  There is a plethora of information already posted here. All you have to do is look.

• How to delete songs that came on my Sansa Fuze?

  My Sansa Fuze came with 19 songs on what I want to delete but I don't know how.  When I plug in my Sansa Fuze in my computer the songs do not appear on my computer but they are on the device when I use it.  They are not in the 'Music' folder or any folder when I manage the device to my computer.  Can someone tell me how to remove these unwanted songs?

  If you don't have any other music/photos/videos etc.  on the "rocket", or you have copies that you are ready to transfer again, the best way to get rid of these songs is to format the "rocket" that erases all content (but does not change its integrated software). Settings from settings/system/Format.

  Or if you have a friend with a new Windows computer, you can see the songs and delete them yourself.

  Why can't you see these songs? It's a long story, but a bit simple.

  The "rocket" has two modes USB, MSC and MTP (Settings/System Settings/USB Mode). They have two different lines in the "rocket" and your computer can only read one at a time. (The "rocket" sees it bit any mode).

  The songs of the sample were transferred in MTP mode. But your computer connects via MSC - my favorite - mode so it cannot see them.

  MSC treats the "rocket" as a generic flash drive. You can drag and drop manually, or if you want you can use Winamp or Media Monkey to sync things.

  MTP allows the "rocket" be controlled - sync, etc. - by Windows Media Player 10 or higher. It allows also WMP transmit codes DRM (Digital Rights Muck) hidden-in-the-user for things like the songs protected against copying and audiobooks that expire. Probably not, you use those.

  The idea was to have the equivalent of iTunes/iPod of coordination for the majority of users - but also for the greater freedom and control of Maritime safety, if a user wants to change. No Windows, on Mac or Linux users, find yourself on MSC as well.  The only real requirement for MTP mode is for DRM files.

  On a computer that has Windows Meda Player 10 or higher, Auto Detect mode the "rocket of" (the third choice in Settings/System Settings/USB Mode) - which is what the "rocket" uses unless you changed it - connects in MTP mode and these songs will be visible and removable. That's why it would be simpler to use PC a friend Windows - Vista, Windows 7, etc.

  The original Windows XP comes with Windows Media Player 9 - a too old version for PSG. If you are running XP you could update WMP (via support.microsoft.com) to empty these songs. Then, you must return to the MSC (not Auto Detect) and do all what you did previously to transfer your music., you'll have all your visible songs by you.

• Song Sansa Fuze Max file size?

  Hi I have a sansa fuze and tried to play a very long piece of music (mix) as a song, but when I try to play the "rocket" plant - gray screen.

  Is there a maximum file size for the songs on the "rocket" or something?

  Thank you very much

  Thanks for your help.

  I'll look into it, but clearly it's hogwash f I need some sort of 3rd party software and edit the files just to play an mp3 on an mp3 player! Not to buy another player from sandisk. Too bad, I did not read these issues before leaving with my money.

• Deleting songs on a Sansa

  I have a Sansa Clip and when my friend was addint songs to her she never turned on, just plugged, transferred songs and then it disconnected. When I turned it on all my 353 songs were gone. Anyone know if I can recover them somehow or why this happened?

  She was probably used Windows Media Player with "Automatically sync" turned on. It is one of the results of this setting.

• 4 GB sansa clip + songs

  have 4 GB sansa clip + it only has 330 songs and says its almost complete, what did I do wrong charge off the coast of the ps3. is there something I got wrong im new to this 1st mp3 player part any help would be thank you very much once again. He plays all of the songs on it now

  You didn't say what format the songs were in, or how fast they were. If you load format FLAC or WAV (as opposed to the format mp3 for example), then I could see where your memory may be full.