SAS/SATA mixed pool and initial data placement

Similar Questions

• Pool and the Volume of data latency does not match the SanHQ

  Using some PS6000 (Sata and SAS) as a back-end for ESXi and looking at the graph view on SanHQ and the raw data on export, but I'm not able to give a sense of latency information.

  Generally for fields, the data in the column pool or member matches very closely to the sum of the parts of the volume (for IOPS / s, flow, read, write, etc.)

  However, latency is not, nor is he anywhere near average either.

  In the graphical display we noticed high (20-40 ms) latency playback of our pools and members, but the volumes that make up these pools are all less than 10ms. During a storage vmotion, we will see a huge spike in IOPS / s and latency and sizes KB will drop to almost nothing during the copy rebound back at high levels as the traffic goes down.

  Makes a lot of sense to me (except perhaps if seq I/O is reduced to deal with latency)

  To monitor latency, it seems that I need to watch the largest volume of latency of a given pool, but not the pool itself or asymmetric information.

  I would get a few reports of MS Log Parser against export CSVs, but I need to make sense of this first. Latency is a KPI is no not a lot of sense.

  When you see the IOPS rise and the latency goes down, it's actually a normal thing. It is called Nagle algorithm. It makes pretty much the TCP packets wait until they are full before sending them. Here is a document that can be useful, what explains the algorithm more in detail.

  http://SearchNetworking.TechTarget.com/definition/Nagles-algorithm

  Until reporting problem you're talking about I would recommend making sure that the last FW is installed on all members of the Group and ensure well the last version of SAN HQ are also installed. Just curious you have configured replication? I can't wait to hear back on your part.

• When I send a text message and mobile data are off, it is not given, but I do not see this message for a few minutes. I can then refer using "send as a text message. How can I 'send as a text message' in the first place?

  When I send a text message and mobile data are off, it is not given, but I do not see this message for a few minutes. I can then refer using "send as a text message. How can I 'send as a text message' in the first place?

  Disable the iMessage?

• When I view my Photos, they have a place and a date. How can I print them with that on them?

  When I view my Photos, they have a place and a date. How can I print them with that on them?

  You want to print the information on the image itself?  To do this, you will need to export the picture on the desk and edit it with a 3rd party image editor that supports the text and layers:

  Some Image editors that support layers and text:

  
  

  Photoshop Elements for Mac 11 - $79

  GraphicConverter - $40
  The Rainbow painter - $30

  Photos of affinity- $50

  FX Photo Studio - $30

  Inpaint - $20
  Imaging - $38
  Acorn - $50

  Pixelmator - $60

  Seashore - free

  GIMP for Mac - free (Yosemite & Mavericks only)

  

• How to extract all the drives SAS/SATA and Ethernet port speed of the link command line?

  Hello

  Do you know if supports Windows OS built in order to extract all the SAS/SATA drives and ports Ethernet link speed?

  i.e. for SATA3 drive it show 6 Gbps, for DIS3 drive it will show 12 Gbps, to present the current link speed.

  i.e. for Ethernet 10 G, it will show 10 Gbit/s while the current connection speed is at 10 Gbps.

  I need the command to create a batch file to run bike test to check all connection speeds are correct in each cycle the system power runs, if the Windows operating system does not support built in order to achieve this, please send us any tool of 3rd - party with the support of the command line to do this.

  Thanks in advance.

  Jacky

  Hello

  This is a forum for Windows and you can't find the experts here, so your question will better suit in the TechNet forum where members of the community who have the expertise to help you. Check out the link and post your query:

  https://social.technet.Microsoft.com/forums/en-us/f4a3a72b-21e4-45fc-b623-eb1d99215c79/command-prompt-and-bat-files?Forum=w7itprogeneral

• Find a VM (from the data store, file, the pool and etc..) ID name

  Hello:

  I wonder if there is a way to find the virtual computer (of esx, the data store, file, the pool and etc..) ID name of vSphere CLI power.

  The goal is to find the virtual if name machine ID if known (and the same for esx datastore, record pool and etc..).

  Thank you

  Olegarr

  Hello

  According to my understanding, we can get the managed object ID of the virtual machines,

  $serv = connect-VIServer-Server

  Write-Output $vm. ID

  The same with others, like first Get-VMHost, store in a variable and then the variable. ID gives you the code.

  I hope this helps.

• Series read the analysis of the data works fine, but the polarity and point decimal placement does not

  I'm new to labview and work on a project that accepts the biotic data. I have read the information and analysis data correctly but when I try to set up the number the polarity and decimal pt do not seem to be correct. When the polarity is negative, a 1, the number that came out is positive. I have posted before and was invited to use the concatenation and the power of 10 and I wonder if it's okay. Should I be looking for the 1 (negative bit) and negate the number at the end before the release?

  I have another question: how to accept a number between the touch screen and just write this number in an output file? I searched in the help and online but found no example.

  Any help would be appreciated.

  I have included my vi.

  Thank you

  I'm sorry, I apologize. I thought since it was a new problem to a new position. I've corrected the problems mentioned in this post me. Oh and when I created the project/vi I created it as a touch panel.

  Thanks again.

• How to configure the options of oracle community such as, I see the answers to the questions posted by myself in a separate stream of data/place?

  Hello

  Thank you for your initiative on the oracle community.

  I love the community and wants to play an active role.

  However, I see the discussions initiated by me in a separate stream of data/place rather than mix them in all the other debates.

  is it possible to search all discussions posted by me only in one place?

  Is it possible to configure the options so that only the answers to my questions will be displayed in the Inbox?

  It used to work before, however, I subscribed to a few communities and my Inbox is bombarded with all the discussions. I read and try to answer on the other discussions, but it is difficult to keep track of discussion initiated by me?

  Help, please.

  Its there in your profile

  user10163762

• Had to reload operating system and applications data, now can't get firefox to recognize the profile data

  My C drive (disk solid state drive), which held my operating system and data from the app crashed. I had it replaced, updated Win 7 to win 10 and have downloaded Firefox. I was able to restore my profile from a Mozy backup data and copied in the Firefox folder. But Firefox resolutely refuses to recognize. I tried using the recovery data from an old profile, but no advantage help page. Tried to use the Manager profile, but without success. When I go to Troubleshooting Information and click on file/Show profile, it comes up with a list of files (files starting with bookmarkbackups, which however is empty, down for webapps, which has the file inside webapps.json), then the files from addons.json down through xulstore.json and the file places.sqlite is 10 240 KB Although there is something in there, but Firefox resolutely refuses to acknowledge my profile, bookmarks, etc..

  I'm out of options and ripping my hair out trying to get all my favorites, in which I have a lot of information such as the authentication of data for many favorite sites. It is frustrating that all the information seems to be there, but Firefox ignore all.

  Can anyone help?

  Such a backup is perhaps a ZIP archive containing all the files into it if it is not a real file, but only one file.

  Note is that you replace the file places.sqlite with a copy of the backup that you have to make sure to remove existing places.sqlite - shm and temporary files to SQLite places.sqlite - wal.
  Ditto for the other SQLite files that you are restoring.

  Have you checked the application.ini file in the backup?

• https without mixed content and EV cert site is shown as mixed and not as himself

  My https:orderform site page contains only images of https and the site has an EV cert which is valid and up-to-date. With history cleared page and visit for the first time that Firefox reports this page contains mixed content and that the site does not identify iteself.

  Pressing F5 to refresh the page address bar correctly shows green with no mixed content popup and that diversity side himself.
  SSLCertificateChainFile was added, and it makes no difference.
  Problem does not occur in other browsers (IE, Safari, Chrome).
  A new FF profile has been attempted, but same problem occurs.

  Why is refreshing the page work?

  Problem in all browsers firefox 3.5 to 14.01. I don't know about those < 3.5.

  I have read and tried most of the suggestions in the forum and elsewhere, but can't find a solution.

  I have not provided the url because it is my order page and it is important for me to see from real visitors.

  First of all thank you for your comments jscher2000

  I thought I had fixed it, but I had to clear the history and turn off the computer for a few more minutes for the error reappear.
  Well it turns out that this was not the difference between the direct replacement and replace().
  However this worked.

  If (xFf) setTimeout (function () {top.location.href = "https://ord.html"}, 300);

  Thus allowing any javascript code following (pending) to finish as suggested.
  I came to the same conclusion before reading your comments.

  WORKS NOW

  However the redirection on the server is a more robust solution.

• Is it possible to add the location and the date on the pictures in a slide show?

  Is it possible to add the place and the date on the pictures in a slide show?

  Only if you manually add a title slide t photo and enter this information manually.  There is no automatic way in Photos.

  Click on the button "+" at the right end of the slide show to add a title slide.

  

• T420 - Question of disk drive (wired Sata + SAS / Sata 2.5 / 3.5 is possible?)

  Hello

  I bought the T420 PowerEdge with a single SATA drive. I've added 3 more to max on internally wired to 4

  I wonder, do I ALSO have to add the hot swap 2.5 or 3.5 and all have work. I guess I have to buy a special raid card if it is at all possible.

  I want to be able to do is have the 4 cables + start adding the other 2.5 or 3.5 (based on price) and build slowly upward.

  If possible, could you please recommend this card, I have to use to get there?

  Thank you very much

  DellUserMichael,

  Unfortunately, you wouldn't be able to do, it is because the chassis are different depending on the storage option selected. T420 storage options are the

  

  1                                   2                                 3

  • Player 4 option x 3.5 inches: (#1).
    • Cable drive bays
    • SAS and SATA disk drive

  8 x 3.5 or 2.5-inch drive option(#2)

  • Hot swappable drive bays
  • SAS, SATA or SSD drives

  option 16 x 2.5 in drive: (#3)

  • Hot swappable drive bays
  • SAS, SATA or SSD drives

  So the question is the chassis are actually different by the selected option.

  Let me know if it helps.

• My main computer crashed and the data has been retrieved from the hard drive, including all of my Outlook Express dbx files

  I'll provide too much information because those of us who are computer knuckleheads think that everything is important since it is a mystery to us.

  My main computer crashed and the data has been retrieved from the hard drive, including all of my Outlook Express dbx files. There are four years of e-mails in these files and critical that I be able to open them.

  My only working computer running XP. It has Outlook Express is installed on it and was once used for e-mail, but not more and not implemented with my ISP to send or receive if it matters at all. Other that the sending and receiving of all the other functions of the OE program appear to be operational.

  I have read many explanations on how to open the files dbx on different sites - all is completely different and most seem well beyond my skill level.

  There is a fairly painless way to open these files? I don't want to try anything that could damage them. Please... any solution please guide me through in its simplest form - I am 64 but pretend you are explaining the process to a 7 year old. Yes, I'm that lame!

  Sorry for writing a novel and thank you to all who take their time to help the ignorant!

  I advise you to immediately copies of your DBX files restored. Save the duplicates in a place safe, and don't mess with them.
  Then try using one of the various tutorials that you have found on the Internet by using a copy of your DBX files restored.
  I did it a few times, but years ago and I DBX http://www.techrepublic.com/forums/questions/how-i-open-corrupted-dbx-files-in-oe/ visualization tool
  You just continue to make attempts, using a tutorial after another.
  As long as you have these unchanged copies of backup of your DBX files, you should survive it - other than frustration. Email PC remains a mess.

• Change of type PowerEdge 2950 SAS SATA Drive

  I (will) will soon receive a PE2950 which has a backplane SAS (PN610) and (YF437) SAS RAID card.

  I would like to convert it to use SATA hard drives and have capabiltiy RAID.

  the only things I need to change, is the backplane and the RAID controller?  or is it more than that?

  Thank you

  You should not have to replace the raid controller or the bottom of basket; SAS hardware is compatible SATA (the other way around does not apply (for example a SATA controller will not work with a SAS drive)).

  You however need will lead carriers, who will not sell Dell on their own, so that you can reuse those among the SAS readers, buy the disk SATA (or SAS) more small/less expensive that Dell is selling, or see if you can find the drive carrier (screws) on ebay or not.

• Help me script to put eps and excel data in page-by-page indesign files.

  Hello

  I have many files eps by S1, S2, S3, S4... sequence. and as much of are available in excel file data.

  Script required:

  (1) S1 eps placed in page 1 and S2 eps on page 2... in indesign.

  (2) data from cells A1 Excel must place in the lower left corner of Page 1. and given cel A2 should place page 2 same place... in InDesign.

  Please provide the script for the same action in number of eps files and excel data.

  Thank you and best regards,

  Sampath.S

  try to rename with the addition of zero... for example

  1---> 001

  2---> 002

  11--> 011