Satellite 2410-504 does not start after you remove RAM module
I need assistance or advice.
I have a portable Satellite 2410-504 and I was looking for to increase the memory, I am a Novice with computers, I decided to remove the Module that is already in place (to see if I was capable of employment)
After removing and then returning the Module, then I went to turn on the laptop and Yes you guessed it, NOTHING!
The power lights are on and the light comes on but the screen is blank and there are no hard disk activity.
Now, trying to get back on my actions, I have been unable to completely remove the battery but I'm sure that he slipped on the connectors.
Could I have caused permanent damage or are my actions retreivable.
Thanks in advance,
Did you check if the RAM has been inserted correctly?
Select this check box.
But of course, the RAM could be damage due to wrong treatment nothing is impossible
My computer laptop didn t start because one of the RAM died suddenly.
What you could do is to remove the battery and unplug the AC adapter.
Then you have to wait a little (one hour) and need to connect the two parts again.
Then try turning on the laptop computer.
I have a laptop toshiba Satellite 2410-504 sick.
When to start he says: -.
"Windows was not start because the following file is missing or corrupt:
Please reinstall a copy of the above file. »
Ive put the Windows CD in the CD player and I went into the BIOS and select CD-ROM as the first priority but it fails to boot from the CD and everything continues (which is) at the start of the HD.
When I changed the priority of WOOD he came with a
PXE - E61: Media test failure, check cable of
So after reading this error message I have check the HD is installed and disabled net card in the BIOS but when even does not start and returns the error message as above.
Any other ideas? Is the broken HD?
Why it wont boot from CD?
HARD drive is recognized in the BIOS?
I can't say for sure, but somehow I think the HARD drive's troublemaker.
When you do all this is some odd reaction? STRANGE begins to read the disc in Windows?
I bought RAM Kingston 2 x 1 GB modules. When I put a single module in my notebook - everything works fine. When I put the two modules - BIOS freezes and cannot start.
I tried to combine my old module of 512 MB with 1 GB of Kingston, but in this case laptop detects only more great module (Kingston). So, I'm stuck with only 1 GB of RAM. In my notebook BIOS version is 3.10, and it's the last. I tested RAM modules in a laptop and each of them works fine.
What should I do now? Help, please!
Download and run www.memtest.org Memtest to test these Modules one by one.
I just sticks of 2 x 1 GB of DDR 400 soddim and no start.
After reading on what I could find on similar models, now seems that these older laptops cannot manage that fast of ram?
With the help of some 266 DDR would be more appropriate?
If the computer laptop doesn't boot then there is a great chance that the RAM is either not compatible or it s faulty.
I think that it s is not compatible.
I found this page:
According to this page the P10 supports the * 200-pin PC2700 (333 Mhz) DDR SODIMM * bars!
If your RAM is not compatible!
regged just with this forum I have a problem to upgrade memory.
I read through a few problems of memory here and all users that it is a problem of memory comaptible. I got Hynix 512 MB RAM in my laptop and I bought 2 x 1 GB memory Hynix these two are match sticks to the installed memory, but when I installed my laptop wouldn't boot at all. It would only boot if I had a stick in both.
I tried to switch ports top and btm and even when a stick was installed it says in XP, Vista and Windows 7 (yes I tried all systems) 896 MB of available space. I even tried to use my other Hynix stick, but he won't start and showed more stick of 1 GB (896 MB usable in Windows 7). After reading all the threads I wonder if it is a hardware failure or is there a fix in the world of Toshiba or perhaps in the world of Toshiba, the L series is almost obsolete and not worth to help people who unwittingly bought their goods.
I apologize for being slightly down on Toshiba but a laptop that shows what he can work and is not a company should hold his hand up and say that Yes, there is a fault and help deal with the problem.
You see 896 MB, because the rest is reserved for VRAM for graphics card.
Sometimes RAM may simply be incompatible, because of incompatibilities of calendar or RAM chip/controller design differences.
What speed and timings is your original RAM?
PCxxxx / DDRxxx =
Schedules CASES/RAS =.
What speed and timings is your new RAM?
PCxxxx / DDRxxx =
Schedules CASES/RAS =.
You can display this information using a utility called CPU - Z
The browser does not start after you have turned off and turned on the computer. I tried to remove the program entirely (as well as personal preferences), to create a new account, install a different browser versions. All this has not helped. (I have Windows 7). Help, please! Every day I have to reinstall Firefox!
Hello Nastena, try a clean reinstall, some Firefox issues can be resolved by performing a clean reinstall. This means that you Remove Firefox program files and then reinstall Firefox. Please follow these steps:
Note: You can print these steps or consult them in another browser.
- Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
- Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
- Remove the Firefox installation folder, which is located in one of these locations, by default:
- C:\Program Files\Mozilla Firefox
- C:\Program Files (x 86) \Mozilla Firefox
- Mac: Delete Firefox in the Applications folder.
- Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
- Now, go ahead and reinstall Firefox:
- Double-click on the downloaded Setup file and go through the steps in the installation wizard.
- Once the wizard is completed, click to open Firefox directly after clicking the Finish button.
Please report back to see if this helped you!
- Also check if your antivirus or other access security software (firewall, antispyware etc.) blocks firefox.
Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.
In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.
What should I do to get a normal departure procedure?
When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.
When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
The same thing happen on my Satellite A300.
Hi, I just upgraded the RAM on my P200D 130 but it does not start after that.
I removed the 2 Hynix 1 GB PC2-5200 and put in 2 SO Kingston DDR2 2 GB PC667 (should be the same as PC2-5200).
Post-market nothing happens, light power control is turned on, I him stays CD drive but screen black, no beeps.
I put one of the 1 GB modules, it starts normally, then I tried a 1 GB into the lower slot module and a 2 GB module in the top slot and it works.
I tried a single 2 GB module in each slot, even in the form of 2 2 GB modules.
What could be the reason, better: what would be the solution to ensure that the modules of 2 x 2 GB to work?
Thanks in advance,
I think that both modules are not compatible to the laptop.
Normally you can upgrade your laptop to 4 GB. Look in the user manual.
The RAM, you should bring the computer dealer and request a new one. More buy modules with the same specifications and dimensions. Try buying RAM with the same specs as before.
Hi, I am first time here.
I bought a Toshiba A200 PSAE0E-03J02JDR with 2 GB of RAM. I bought a pair of ram Corsair (2 * 2 GB VS2GSDS667D2). The computer does not start after that I installed the memory. I have intel 945 chipset, which is capable of 4 GB (manual page 1-2). The bios version is 1.8 2007.
Can anyone help me, please.
Post edited by: Marian ovidiu
The A200 series supports different chipsets;
Intel 945 PM
As far as I know your laptop supports the * 943GML * Intel chipset and the chipset supports 2 GB RAM max.
Take a look at your laptop s user manual * Page 18.*
Summer: 4 GB of RAM are not possible, and therefore your laptop does not start.
As the topic says my computer does not start after a change of the RAM.
I've updated 2 x 2 GB 2 x 4 GB DDR3 SO - DIMM 204pins Rams. When I start the computer after installing new RAM does nothing, all I get is a black screen.
According to the Spec computers, it should be able to take up to 8 GB of DDR3 RAM.
Can someone help me?
Here's the key:
We're working on two sockets and one does not at all.
You have a bad memory module. It happens very rarely, but it's not impossible to get a new stick of bad memory. Get the replaced bad and I think you'll be fine.
Our Integrator bring to our company KVR800D2S5, but laptop memory modules does not start :(
I read manual - this laptop supports 533 PC4200 memory modules.
But SO-DIMM 533 MHz will be delivered in one month...
The memory modules, we can install to Toshiba L100-113?
I think that the laptop does not power upward because of a barrette memory faulty or not fully compatible.
Please visit this memory 3rd party:
[Memory for Toshiba Satellite L100 113 | http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=22360&ft=m&st=3]
As you can see Satellite L100 113 memory can be upgraded up to 2 GB (2 x 1 GB) and you must use the DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM
I bought an additional memory for my laptop, but after installing it the PC will start is no longer, when I turn it on it makes a brief noise then nothing. After taking the memory expansion out again once, the laptop still does not start.
I agree with "guy sos." There is no doubt motherboard problem now. I assume you used the incompatible memory module.
In any case, contact the after-sales Service of Toshiba partner in your country and explain to them the situation. The address that you will find under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true
Please help my pc usually start more after I uninstall my nvidia driver mx/mx 400 with YourUninstaller I try to use this option to uninstall my driver in super mode then prompt YourUninstaller and asked "do you want to restart your computer now" then I click Yes but YourUninstaller software now on the race because the YourUninstaller has finished remove the registry left behind by uninstalling normal after that there is no register found after scanned. Then I click Next, then I closed this request. Then I restart my computer manually but blocked windows then I wait 5 or 10 minutes, but do not restart Windows. I turn off my APR, then I turn on my pc then windows does not start. I try to reformat but it's the same story that windows does not start. I try to remove the cmos battery hoping it will solve then it works. But the problem is that I insert my bootable cd, it runs automatically even I don't not press a key on the keyboard, the process to continue installing windows, it sounds I can not install my windows correctly. When he restrart the process goes again to load all the drivers everywhere why did this happen? Is there something wrong with my HARD drive once I used YourUninstaller?
RAM of a problem with you, I guess. Remove the RAM and clean including the slot of the motherboard.
If this post answers your question, click mark as answer .
We're under 4.1 SRM and moved its sql database to a new server sql (new server sql a different host name). We moved successfully to the virtual center & Manager Update bases sql data, but after moving srm4.1 database, the srm service does not start...
so far, I uninstalled SRM (DO NOT remove the SRM database)... After uninstalling SRM, I rebooted the server. Then I have re-directed the SRM installation and started going through the installation of MRS... After pointing the SRM installed on the server vcenter, port 80, and pointing to an existing sql database, etc., I get a thumbnail of certificate message and a prompt on the creation of a new certificate, which i say 'yes' to... Installation continued on and arrived at the end when it says "create certificate"... then does not say "cannot install the certificate...". Database error has occurred. "At this point, the installation failed
Any ideas on how to remove the old certificate or work around this error?
I think the error message is misleading in this case and the problem is not related to the certificate.
I still think that it is permission DB / configuration number.
Following links may be useful:
I have a problem with the laptop of my companion. After she pours water on her, she has stopped working (no surprise really lol). I took it to pieces, right down to remove the motherboard to try to find the fault. Now when the AC is connected and batt is in place, NIP of the led, same thing happens without batt.
BUT the computer does not light when you press the power button. Im guessing that it is a hardware failure, since water isn't really best friend elecrtics, but I was hoping someone else might have other ideas/solutions?
I searched the toshiba site and found nothing on this laptop.
Any help is very appreciated!
You are absolutely right. It's probably hardware failure and I fear that the motherboard must be replaced. I recommend you contact Toshiba service partners in your country and look for info on the repair and costs.
Maybe you are looking for
try to play a MP4 video from a USB it plays but on the side. I can turn it?
Hello I've never updated before BB device and I searched for a few days without a clear answer then hoping someone here can help me out. I'm moving from a 9760 "BOLD" of BB to a passport in two weeks. If I backup my 9760 can I just restore it on the
A sad morning I wake to find that my BB screen was white. He could still receive calls, take those who were on the speed dial of a received SMS (although what was the point of that?). Judging by the fact that he still has the personilized rigtones, I
I tried to find this product on Hp site support and no useful I have download all don't readers expert an amd radeon hd grafic 7470 m driver I tried to search on the website of amd, but no useful please me not help find this driver please please plea
HelloI learn SFDC-Eloqua integration, for that I use my sandbox eloqua (there is little contact) and the instance of salesforce trail (there are no data).I gave username admin and the password in "intégration CRM Configuration" page in Eloqua CRM int