Critical error (BSOD) on Satellite A300-1MW

Similar Questions

• Update BIOS on Toshiba Satellite A300-1MW

  Hello.

  I have Toshiba Satellite A300-1MW with version 3.5 of the BIOS. Can I upgrade to version 1.7 which I downloaded from the Toshiba site?
  Whay I want to do?
  Because I have a lot of problems with this laptop. For example:

  (1) slow loading on the compatibility mode system
  (2) when I put the AHCI mode and reinstall the drivers SATA then loading is faster, but I have problems with the critical error

  I don't know what to do :/ Maybe I have bad drivers (it is not possible because all the drivers are of the Toshiba site) or maybe I didn't install drivers (there are many drivers on the Toshiba site, I don't not download and install all the)

  Can someone write a list of the drivers I need to install?

  Thanks in advane and have a nice day.

  Yours,
  Tralla

  Hello Tralla

  As I see you have already posted a thread with the same question and I wonder that you ask the same question again.

  You have these problems, because you didn t install WXP correctly. If you want to have many preinstalled WXP and use with full speed use the AHCI settings in the BIOS and load Windows XP Home edition with all SATA drivers.
  After having this laptop will run fast and you won't have problems BIOS update should not be done at all.
  This theme is very often discussed on this forum and please take some time and check this forum on the installation of Windows XP Home edition using the SATA driver.

  Good bye

• Satellite A300-1MW - BIOS update instructions

  Hello.

  I decided to upgrade the BIOS on my Toshiba Satellite A300 1MW
  I found something like this http://eu.computers.toshiba-europe.com/innovation/faq.jsp?FID=TRO0000000b07 but I can not find Satellite A300

  After you download the updated BIOS Toshiba site and unzip it I have something like this:

  http://img520.imageshack.us/img520/1120/67302832.jpg

  What should I do now?

  Hello

  The BIOS update should be run from Windows System.

  Have you tried that?

• Need a few drivers for Satellite A300-1MW

  Hello
  I have a problem once more. I need some bacic system device drivers, but I don't know what drivers I should download and install.
  You can see something on this picture:

  http://img21.imageshack.us/img21/5462/87508685.jpg

  And here is the screen with the list of drivers that are now installed on my computer:

  http://img21.imageshack.us/img21/1855/52063643.jpg

  My operating system is Windows Xp Pro + SP3 with SATA drivers integrated.

  Can someone make a list of the drivers for Toshiba Satellite A300-1MW?
  Where are a lot of drivers on toshiba site but I don't want to install them all because some of them are unlesses.
  They are only my computer slowly.

  Thanks in advance and have a nice day.

  Yours,
  Tralla

  > Where are a lot of drivers on toshiba site but I don't want to install them all because some of them are unlesses.
  Funny... I doubt that. ;)
  Why do you think that should Toshiba offer drivers that they are not needed?

  To be honest, I can't tell what drivers are missing because the screenshots are not in the English language.

  In your case I would visit the Toshiba driver download site. Download and install each driver and tool that you can find for your laptop model. It's really important. Otherwise, things will not work properly. They do not slow laptop because they are needed.

• Error ATIKMDAG on Satellite A300

  Despite the other regarding wire the same problem on the A200 and a moderator to lock after incorrectly assuming that he had been standing, it has not been resolved.

  The question (as anyone would discover if they searched the net about this) is not limited to a specific model of the satellite, but rather, it is the catalyst driver (and use one provided by toshiba) and has been ongoing for years and only occurs when another display is attached.

  Someone at - he found a solution to the problem?

  How about Toshiba actually quite caring to look at it... or should I get a refund and buy a different laptop? This is my 3rd Toshiba laptop in as many years, because I like them, but them from GEFORCE ATI was a BIG MISTAKE.

  What would you say if we Toshiba, ranging from to fix it for us?

  Hello

  You wrote very interesting opinions and it's OK but I'm afraid you have the wrong. Each notebook series is somewhat different, and perhaps you do not understand as general Toshiba problem. Use Google and you will find many threads in various forums where people related to the same topic on different desktops and laptops.

  Just for example, Toshiba has obviously corrected this on Satellite A210 and you can see under http://aps2.toshiba-tro.de/kb/60/TSB8100R30000R01.htm

  If there is the problem with the A300 I am sure that Toshiba will make the effort and offer the solution regarding the model A210.
  Satellite A300 is fairly new and not so long on the market. BIOS and driver updates display cannot be created overnight and I am afraid, you have to be patient on this matter.

  In the end, I must say that moderator doing a very good job. You should not confuse people with your personal statements and they should not think in the wrong direction.

  Good luck!

• Error setting output Satellite A300-1jh - Toshiba HD DVD Player - audio

  I have a problem! When I try to play a dvd on the toshiba hd dvd player its gives me an error message saying "an error has occurred in the audio output settings. Please check audio driver is set up correctly. »

  I read a similar thread on this forum in which it is said that I should install the latest version of the Reader 4.51.07! I installed it, but the message keeps coming back! I have windows vista ultimate 32 with all updates! What do you think I should do? Thank you.

  PS: I have a satellite a 300 (psagle) 1jh

  Post edited by: petrutjim

  Hi mate

  I found this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=162772

  He's certainly the same question as in your case and the solution was a DVD player patches installation or installation of new full HD DVD player.

  Notes; the Vista should be also updated!

• Win 7 blocks - BSOD on Satellite A300-23d

  Hi all
  I just win 7 on my system
  installation passed well, but now every hour, the pc crashes and restart, then I get a message saying:

  * Signature of the problem: *.
  * The problem event name: BlueScreen *.
  * OS Version: 6.1.7600.2.0.0.768.3 *.
  * Locale ID: 1037 *.

  * More than information about the problem: *.
  * BCCode: 4th *.
  * BCP1: 00000007 *.
  * BCP2: 000BF2D3 *.
  * BCP3: 00000001 *.
  * BCP4: 00000000 *.
  * OS Version: 6_1_7600 *.
  * Service Pack: 0_0 *.
  * Product: 768_1. *

  What can I do?
  I got a HD 3650 of Redon.

  Hi shaked,.

  Could you be a little more detailed, please?
  When this happens exactly, and you notice a consistency to a specific program or something else?

  Maybe your laptop must be cleaned using the jet of compressed air

  Otherwise, check for yellow exclamation marks Device Manager. BSOD is often related to the drivers and also check the RAM with Memtest86.

• Satellite A300 - where can I find the SATA driver?

  Where can I find the SATA driver for Toshiba Satellite A300 1MW for Windows XP?
  I tried to find it here:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  There are a lot of drivers, but none for SATA.
  and here: http://downloadcenter.intel.com/
  Here I can't find appropriate for my model injector.
  Thank you in advance for your help!

  Hello!

  The SATA drivers are in the Intel Storage Manager, so you need to download this package.
  You can find it on the Toshiba site and on the Intel Web site.

  Check again for Intel Storage Manager Web sites.

  Good bye

• Satellite A300-23d - BSOD on start up

  Hello

  My name is Tom and I have a Toshiba Satellite A300-23d for about six months. Yesterday, I used a HDMI cable to attach my laptop to my LCD to play abit on a higher resolution. In addition, after a while the PC crashed and rebooted itself with an error appears on the screen.

  I tried several times to reset and start it again no success at all. I get trying to boot my computer is:
  First black screen windows recovery error, then regardless of the option I chose the blue screen appears.
  http://img29.imageshack.us/i/img9210a.jpg/
  http://img29.imageshack.us/i/img9212p.jpg/

  Thanks for your time,

  Tom

  Hi Tom,

  I searched a bit using Google and I founded a few interesting articles on this BSOD code 0 x 00008086.

  It seems that the only solution for this problem is Toshiba Recovery disk now. I mean normally repair option would also be my first choice, but if you get a blue screen too, you don t have other options now.

  Then enter the Toshiba Recovery disk and boot of it. It can restore factory in a few minutes. Don t forget your whole HARD drive will be erased.

  Good luck! :)

• Recovery Disc Creator Error - Satellite A300-1GN

  First of all, sorry for my English, but it is not my mother tongue. On my problrm, short and simple technique:
  I use Toshiba Satellite A300-1GN with Vista 32 bit. I tried to create a recovery using Toshiba Recovery Disc Creator disc.

  I inserted a new DVD disc in the DVD burner and program was working fine but suddenly that he will miss just give an error with something like that 'there was an error in the calibration of reinforcement sector. "Error code: 0E01B5-26-00037304"

  What's wrong?

  What should I do to create the disc of tha? I can only add, that I turned my system of any virus just as it was said in manual Toshiba, but it did not help.

  Pleas, help.

  Hello

  I agree with the codes for the TDKs are not bad and I had a very good experience with these media.
  I tried to burn the recovery disk using another brand and I've damaged 3 DVD + R discs
  Then I went to the TDK DVD - R and it is ok

  I think that questions is related to the question of the compatibility between the discs and the STRANGE...
  So it of really worth to test different media!

  Good luck

• Satellite A300 - error: "webcam driver open fail.

  Hello

  I have a Toshiba Satellite A300-1SM computers upgrade to Windows 7 (32-bit), and since yesterday, the webcam gives me problems. Does not work.
  Is a Chicony Webcam, built inside the computer. Has suddenly stopped working. The following error message appears: "webcam driver open fail. Please restart camera or system. "
  I have not touched or anything installed. It happened the day after.

  I tried to restore the computer to an earlier date and it worked for a few minutes... but it failed again and pops up the same error.

  I wonder what I have to do to return to 'recover' my webcam.

  Thanks in advance.

  Greetings

  Hey,.

  There is a lot of discussion here in the forum about webcam driver problem, and you should read those discussions:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=233048𸹘
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=232084𸪔
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=233417𸿉

  Problem is that I can t say more about it because the error never happened the same I use my webcam often enough but no problem at all. :)

  Anyway, if you have other questions you can post again ;)

• Satellite A300 - displays error recovery disc creator

  Hello

  I have a Toshiba Satellite A300 (PSAGCE) and I created the recovery by using the "TOSHIBA Recovery Disc Creator' disc but I did this a few months ago, but now the disc is scratched, and when I am formatting my computer it gives me an error when loading files. So I decided to create another disc, using the "TOSHIBA Recovery Disc Creator', but she also give me an error with one of the files during the creation of the disc. What should I do now?

  I have a friend who has a Satellite A200, can I use the disk? I did a printscrean showing the error. Sorry the bad English, I'm Portuguese...
  [http://img199.imageshack.us/img199/4030/semttulovj.jpg |]

  Hello

  It is good that you posted a screenshot of the error, but perhaps you can translate it into English, it would be more useful.

  In any case, the disks that you use to create the recovery disk? I m using Verbatim DVD-R media. It worked perfectly for me and I can recommend this path.

  In addition, you can see the Toshiba page for an update of the firmware of your CD/DVD drive.

  Finally and above all, I doubt that for Satellite A200 recovery disk will work for you also. The models are different

• Satellite A300 - BIOS settings incorrect error during recovery

  Hello

  New to the forum, I had a search around so im hoping someone can help me.

  I have a Toshiba Satellite A300 PSAGCA and trying to resize a partition my computer become unresponsive and since then I can not load Windows Vista. When the computer starts it comes up with the error "interrupted operation: insert the Recovery CD.

  So I used the restore CD that was with my program of partition but I get a different error message saying "Incorrect BIOS settings change video buffer size" which I cannot find in the BIOS and no help from their support.

  If im now doing a Toshiba Recovery and restore my laptop, but I can't get into recovery. Holding F8 during startup to show the boot advanced options, or not taking '0' as ive read its supposed to.

  Any help would be appreciated!

  Thank you

  Can you please tell me how you tried to resize the partition?

• Errors with display & to access the pages in IE - Satellite A300

  Hello
  For a few weeks now, I not was able to display images in their entirety on Web sites - they just don't download not entirely or don't load at all.

  I'll also have a lot of problems with the two IE & Mozilla Firefox, when I try to access the sites Web & click for more into Internet sites I constantly get errors & the page does not load until I Ctrl F5 many times.

  You wouldn't believe how many times I have done this for just register on this forum & get to that stage.
  It's like any site that has multiple pages or much info to download is just too much for the two programs?

  An error indicates to the bottom of the lower part of the IE: res://ieframe.dll/dnerror.htm in this case, if this can help.

  I checked the memory etc, all right.
  I have a satellite A300. Hope someone can suggest something.

  I have Zone Alarm firewalls, spies & antivirus software. Have had throughout & its only been in the past weeks I have had this problem?

  Thank you
  Di

  I hope I'm not scare you, but to do it please read the thread below the link to the case where it applies to you:
  http://forums.Spybot.info/showthread.php?t=21787

  These things are usually one of two causes:

  1.
  Something is interfering with your Internet session.
  Malware is the most common example.

  2.
  Something wrong with your internet connection.
  A bad line ADSL, for example.

  But I feel a reason to software here.

• Problem with battery Satellite A300 - battery displays error icon

  I have laptop Toshiba Satellite A300 PSAG0E.
  Suddenly the battery in my laptop icon began to show "There is a problem with your battery so that your computer could suddenly turns off".

  No idea why this happened and what do I do?

  What would it cost for a new battery in USD?

  What comments: it s the first time that I read about it m...
  Of course, I've read many messages are contiguous to battery problems, but I've never seen a notification of error in the battery icon.

  You could try to calibrate the battery.
  Discharge the battery completely. Then charge it at 100%. Repeat this twice!
  Check the operation of the laptop.

  But be aware that sooner or later your battery would die and you need to replace the battery.
  You can get a battery of 6 cells PA3534U-1BAS/BRS for about 70-90 Euros

  Welcome them