Sat 1130 - HARD drive replacement

Similar Questions

• HP Pavilion dv7t-4100 CTO Entertainment Notebook PC Hard Drive replacement

  Hello

  I have HP Pavilion dv7t-4100 CTO Entertainment Notebook PC, and I had problems with hard disk of the guarantee period. for example I buy in 2010 and had a hard drive replaced in 2011 and 2012. Next time, he failed in 2013 (almost 11 months apart on average).

  The last time it failed, the warranty has expired so I thought to give it a try as employment through fixing/amortization of bad sector seagate software, Toshiba... that came out of Smart Drive Error.

  I use the HARD drive for some time now, but want to be ready for the next round and I don't know that he's going to be gone for good next time.

  Current HARD disk is 640 GB, 7200 RPM hard drive (replaced in 2012). HP 621046-001 manufacturer.

  When replacing, can I use ANY hard drive 640 GB? Can I use a hard drive that is higher than 640 GB? Different RPM?

  Any suggestions on hard drive?

  The recovery discs I had received with the replacement drive did not work properly. I had to use the first game I had created just after I bought the laptop.

  Thank you.

  -Pratik Patel

  I think that 160GB 2.5 "SATA III SSD is good for the system.

  Thank you

  visruth

• a new backup on external hard drive replaces a precedent already on the disc

  backup to an external hard drive replaces a previous backup already on the disc

  Depends on what software is used to make it.

• Satellite P200-13Z - upgrade the hard drive - can I use SATA II hard drives?

  I have a Satellite P200-13Z with simple standard Fujitsu 120 GB SATA hard drive. I want to change this to a RPM SATA II 250 GB Western Digital 7200 RPM drive. This interface SATA laptop does support SATA II? Thank you very much!

  Not your portable computer does not support SATA II.

  However, you can buy the SATA II hard drive and put it in your laptop. Only way to get it going is to restrict the new speed of SATA HDD, I accelerate. To do this is to introduce a jumper on the drive to restrict it to SATA I speeds up. Once it's done put in your laptop and viola, it works.

  Good luck, but I would like to get a toshiba technician to install it if its under warranty. It's for your own good, so you don't turn your laptop into a boat anchor.

• Advice on moving 1.5 to SATA 2 HARD drive and put the Samsung SSD on SATA 1...

  My plan is to make a DVD of W10 MS

  Power off

  Unplug 1.5 to boot/storage HDD SATA 1

  Connect Samsung SSD SATA 1

  Turning and fresh install MS W10 on SSD and let it update

  Then, can I plug 1.5 to SATA 2 HARD drive and make it just my storage via disk management?

  What steps/tips to make this an easy transition?

  Paul

  It should not matter if you use SATA1 or SATA2, but there are always exceptions.

  I got a motherboard with two different SATA [Intel & Marvel] controllers with different speeds. It is unusual, so the safest bet is to use the same SATA connector for your new SSD that you used for your old HDD.

  Since you have two bootable disks, you may need to go into EUFI/BIOS and set your boot order to boot from the new SSD first.

  You should be able to access the files on the old drive without problems, but I've seen on occasion where you will get an "Access denied" error due to 'permissions' problems, especially if the original/OS disk has been protected by a password. If you have any questions, you can create a linux live boot disk "to access your files.

  Instead keep you the old drive as is, with an operating system and boot volumes on it, you must backup/move your important files to your new SSD then remove all volumes on the old disk, create a volume, and then format to use as a data/backup drive.

  If you found my answer helpful please say thank you by clicking on the icon of the thumb.
  If my answer has solved your problem, please mark it as accepted Solution. Thank you!

• hard drive replaced a moment my performed web cam will not work

  I have a dell m5030 I lost my o/s I had the hard drive replaced a moment made my web cam does not work WHY?

  willmason1953,

  When you have installed the operating system, have you installed the utility of the portable system and the first chipset drivers? If this is not the case, the rest of the drivers will not install. How to download and install drivers in the correct order

  Rick

• HP-G053NL: HP-G053NL Ram and hard drive replacement

  Hello

  There's a guide for hard drive replacement/upgrade and RAM laptop HP-G053NL?

  Thank you.

  Hello

  This is the manual of the device you're using.

  http://h10032.www1.HP.com/CTG/manual/c04162986.PDF

  For more information, visit the link below

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&LC=en&product=7450832

• I had my hard drive replaced on my Toshiba lap top and my windows 7 is no longer considered as authentic code has rubbed off the sticker on the base of my lap top. Where can I find it?

  I had my hard drive replaced on my Toshiba lap top and my windows 7 is no longer considered as authentic code has rubbed off the sticker on the base of my lap top. Where can I find it?

  Option 1:

  If the COA sticker is damaged, you must use the recovery partition to reinstall Windows 7, it will be exempt from the need to use the product key to activate your installation of Windows 7.

  Option 2:

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling. This will exempt the need to also use the product key.

  Option 3:

  If neither options 1 or 2 is possible, then you will need to invest in a new license of full version of detail.

• I have Abobe CS2 I bought and legally own. I have an old MacBook Pro who had to have the hard drive replaced. I reinstalled the CS2 software and I can't activated with an authorization code. I need the code to use my order

  I have Abobe CS2 I bought and legally own. I have an old MacBook Pro who had to have the hard drive replaced. I reinstalled the CS2 software and I can't activated with an authorization code. I need the code to use my software. I can't afford a monthly payment with Adobe Cloud. How can I get my software activated so I can use it? Thank you.

  Please follow the steps described in this document - error: "Activation Server unavailable". CS2, Acrobat 7, pass a hearing 3

  Thank you

  Bev

• My Mac has crashed. Reinstalling my operating system or hard drive replacement will cause me to lose my Adobe Master Suite?

  I bought my Macbook Pro 17 (it's a Mid-2009, running Cougar 10.8.4) used on eBay, and it came with Adobe Master Suite CS5. I pursued a degree in graphic design, and the computer had everything that I needed to start. Now that I'm out of College, I rely heavily on InDesign and Photoshop to get the job done. However, after five years of loyal service without problem, my Mac has crashed and I have never used time Machine. I might have to reinstall Mountain Lion or replace the hard drive. Reinstalling my operating system or hard drive replacement will cause me to lose my Adobe Master Collection of applications? I can save them somehow?

  Any reply and help would be greatly appreciated.

  Thank you for your time.

  Caleb P.

  When you have a non-functional computer and cannot turn it off, click on the link below

  Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990 to adjust the number of activations

  Lost information - response #1 in https://forums.adobe.com/thread/2008767

  -page includes links to the programs to find a serial number installed on Mac or Windows

• a1140n flag replacing the SATA II HARD drive?

  SATA II disks can be used to replace a SATA drive failed in the above desktop machine?

  The specifications for the machine indicates SATA, but I'm not sure the new II will work in the system.

  Thanks in advance.

  Yes that correct, there is no reason why technical SATA-300 (SATA II) will not work in the system SATA-150. Like most BUSES and protocols, the specifications call for SATA-300 to be backward compatible with SATA-150.

  I read this somewhere a bit backwards: the HD is not reach anywhere near the 300 MB/s transfer speed which can be able to SATA-300 interface, test to see the

  up to 35 MB/s - 135 MB/s for non-RAID drives and up to 225 MB/s for readers RAID0 configuration. 150 / 300 MB/s is SATA ports

  maximum transfer rate, not the maximum hard disk transfer rate. This means that the port can handle up to this number transmittions,

  but this does not mean that the hard drive can achieve this goal.

  If the faster hard drives can only max to 135 Mbit/s it makes you wonder why SATA-600 is developed. I would get a HARD drive with the largest affordable cache on this subject.

• Inspiron 1545 - hard drive replacement, new drive SATA not found 'internal hard drive not found ".

  Hi all

  I'm trying to install Win7 in an Inspiron 1545 with a new SATA hard drive that has been purchased. When I insert the disc, I get "Internal hard drive not found." I checked the drive does not appear in the BIOS, I already tried to reinstall the drive several times. In addition, I tried to load the chipset drivers, drivers SATA, etc. of the Dells, the Reader site still does not appear in the installation of the OS when starting on a DVD or in the bios.

  I do not think that there is a problem with the new drive, I plugged the new drive in another Dell laptop model and it recognizes the drive in the BIOS, also I can always start on the previous in this laptop without problem hard drive when I plug it in.

  Is there a specific driver, etc. should I use for the drive to be recognized or have other thoughts?

  It's strange - either the new HDD has a rare compatibility with your embedded controller problem (I use a 500Gbyte in my 1545 no probs)) or it is a mechanical problem. I look at the physical dimensions and compare your original hdd by the new. Watch the video (even if it's on a 1525 (similar to a 1545) and a SSD hard drive)-go to 02:20

  cs_setInnerHtml ('video_a3a3072d-f294-4bec - 85b 6 - 1eefb7b19e68', ");

• iMac mid-2010 for one SSD HARD drive replacement

  Hello

  After reflection, (mainly in the meantime my principalement en attendant mon iMac iMac starts!), I decided to replace the HDD with a SSD. After having done some research and I watch YouTube videos, I'm not sure if I have bought the right tools for the job. Could someone please help me and let me know if I'm not on the right track here.

  The iMac in question is a model 27 "2010.

  Here's what I have on order:

  • Samsung 850 EVO 500GB SSD
  • OWC online Thermal Sensor HDD upgrade 2009-2010 - https://www.amazon.co.uk/gp/product/B017OEQKV2/ref=oh_aui_detailpage_o00_s00?ie= UTF8 & PSC = 1
  • Kingston Technology 2.5 to 3.5 inches support and live for SSD - UTF8 & PSC = 1 https://www.amazon.co.uk/gp/product/B00DGL2X7I/ref=oh_aui_detailpage_o00_s00?ie=
  • 2 x cable high quality Original SATA 6 GB/s 3 - Gigabyte https://www.amazon.co.uk/gp/product/B00BBYOD3E/ref=oh_aui_detailpage_o00_s00?ie= UTF8 & PSC = 1

  I also ordered suction cups and relevant screwdrivers.

  I intend to completely remove the current HD and its replacement by the new SSD. Am I right assuming that I will just remove current thermal sensor cable and replace it with the one OWC? I'm not 100% on this one.

  Cheers in advance

  Ian

  Yes, you just remove the thermal sensor and place the OWC in line sensor (the sticker pad can be placed on the support of 2, 5-2, 5 (as the SSD will not have a lot of heat).  The longer a cable must be re-attached the logic board.

  The only suggestion I have would be - it probably need not SATA cables for this-> upgrade SSD HARD drive, thermal line sensor is long enough - in fact, too long that I had to press them to be shaped in the iMac.  Unless you plan to add other SSD in the system, since the iMac 2010 with SATA 2 (3 GB/s speed).

  Good luck

  Sam

• Tecra S3 - 153 Maximum capacity of HARD drive replacement

  I want to install a new HARD drive with a higher capacity, but I can't find any information on the maximum capacity of replacement of hard drives.

  Does anyone know hwo to find that info or what would be the maximum capacity for TECRA S3-153 PTS30E-0TD03S?

  Hello

  Tecra S3-153 supports the SATA controller.
  As far as I know that the SATA controller is not limited, so, theoretically, you should be able to use HARD drive sizes 2.5 SATA; 250 GB and more

• Equium A300D - need hard drive replacement

  Hello

  I need to replace my hard drive on the laptop above as he succumbs to a death.

  Y at - it a manufacturer Toshiba recommends that I should look for when buying a new Sata Drive?

  Thank you

  Hi drik123,

  No, there are no special manufacturing activity that you need to buy or are compatible with the laptop. Each 2.5 HDD with SATA connector works and is compatible.

  Also there is capacity limit on interface SATA so 500 GB or more will also work and recognized. :)