Satellite 2450-201: update driver DVD - IDE #1 error

Hello

I need help to upgrade the dvd for my laptop model Satellite 2450-201 with internal dvd writer.

I have LG and I got this message at startup: error IDE #1. Any suspicion that I speak with Dep. error tech and he said that the problem of compatible driver. I think that good performance with the system.

If I update the bios from 1.3 to 1.5 it will solve this problem?
Or do I need another brand name model to replace the old DVD with DVD - RW?

Hello

As someone from the tech, adj. suggested that this error message appears because the car is not compatible.
The disc has a bad master/slave setting and so the BIOS can not recognize the drive.
To resolve this problem, you must upgrade the laptop with compatible player.

I found a compatible Toshiba PA3255U-1DV1 DVD-RAM drive. But this isn't a burner.
I suggest to contact Toshiba service partner in your country to control the compatible player and supported. So you can be sure that you will get a good player.

Tags: Toshiba

Similar Questions

  • Satellite 2450-201: replace the optical drive.

    Hi, the drive combo DVD in my satellite 2450-201 has recently stopped reading dvd

    Hello

    If I remember correctly your unit select a bay and you can remove the easy DVD player. In the lower corner, you will find SlimSelectBay latch. Move to position undocking and carefully remove the disc.

    The disc is set to SlimSelectBay. I have gift? t remember exactly how many screws are there but the disassembly procedure is not complicated. Check it!

  • Question about DVD watching on Satellite 2450-201

    Hi, I have a satellite 2450-201.
    and I'm sure that when I had it first I could watch DVDs, s without having to start, only now, when I try this the computer starts completely before it will play, now perhap it did this before but I didn't take so long to start, because there was not much on it to slow it down, what I want to know is : is it possible or just my imagination, if not how to reset it please.
    Thank you in antisipation
    Pete

    Hi Pete,.

    You don't say what operating system you have. To watch DVDs without having to start you would need to have Windows installed MCE. He would use a small area of your hard drive to store the necessary software to allow you to play DVDs without having to start your main operating system.

    If you have XP (Home or Pro), then it is more likely that your startup process now takes longer than before so that you can start your DVD software. In this case check for unnecessary tasks or processes by using the Task Manager and I would also recommend spyware scanning, removing everything you find and run Defragmenter and disk cleanup.

    HTH

  • Re: Satellite 2450-201: WLan reconnects if driver GPU has been installed

    Problem just second hand laptop laptop that Toshiba Satellite 2450-201 to the format.
    Everything works fine. Then when I load the drivers for graphics (nVidia gforce 4 420 Go) my Intel pro wireless 2200bg wireless grave card and does not recover.

    Turn off the graphics card works OK wireless again.

    Someone at - it ideas please

    I would like to know if you have used a page of the Toshiba driver graphics driver and if the WLan Intel card is up-to-date?
    WLna card driver can be downloaded here:
    http://APS2.toshiba-tro.de/WLAN/

  • Satellite 2450-201: nVidia display driver

    I just downloaded the latest driver from nvidia display for satellite 2450-201 of toshiba and now the screen went worse the driver is 3.6.4.8. for nvidia gforce 420 go what I'll do I tried to roll back, it won't let me! and I have not a system restore point nor is there some settings using nvidia!

    Hello

    I checked for your device and Toshiba download page, there is only one display pilot available (v 36,48). Can you please tell us what version number has this driver and where exactly did you find?

    Try to uninstall it from the Device Manager, restart the device and install version 36,48.

  • Satellite 2450-201: slow startup and shutdown

    I HAVE A SATELLITE 2450-201 AND I RUN ON WINDOWS XP HOME EDITION, I DID A REGISTRY CLEANER EVERYBODYS USERNAME USING REGISTRY FIX 5.5
    I HAVE DEFRAGED MY PC AND ALSO OPTIMIZED MY MSCONFIG STARTUP ITEMS AND EVEN THE BIOS UPDATE.
    THE RESULT IS EXTREMELY FASTER WHEN I CONNECT AND ACTUALLY UNDER WINDOWS BUT THE SAME OLD VERY SLOW STOP AND START TO WHAT I DO.

    THE WINDOWS BAR GOING ALONG AT LEAST 15 - 20 TIMES TO HELP START!

    Hello

    Maybe you've connected to some external devices to slow down the start-up procedure. You can also try to disable all the hardware components you n t need (modem. IrDA). Also check out which device is defined in a first start time (I hope that the HARD drive).

    For slow closing is responsible only running processes that should be forced disconnected. It all depends on your own configuration and you are using external devices.

  • SD 2 GB card is not readable on the Satellite 2450-201

    I have a satellite 2450-201 with a slot for sd card, when I insert a kingston 2 GB sd card it read doesn´t.
    What could do?
    The sd card Don t have a problem.
    I think that something the perhaps pilots is an upgrade, but I can´t find it anywhere.

    Post edited by: alcoolpuro

    Hello

    You are right. There is no update available. At the moment where the device was on the market, the card 2 GB SD was not available.

    This device is very similar with 5200 Satellite and you can try to use the SD card of her driver. It should be version 2. 0 2. I really don? t know if this can help, but you can try it.

    Otherwise, I really don? t know what you can do about it.

  • Satellite 2450-201: USB 1.1 instead of 2.0 controller

    I formatted the hard drive on my Satellite 2450-201 and loaded Windows XP SP2. I loaded all the drivers from the disk utilities and everything works well except the USB ports work only in 1.1 instead of 2. There is a yellow exclamation point in device on USB controller Manager. I tried a Toshiba download driver but there is nothing available.
    Can someone suggest a soloution to this problem.

    John

    Hi John

    As far as I know that there is no driver for USB controller. When you install the chipset driver all USB ports should be recognized correctly. Exclamation mark in Device Manager is an indication that the device is not configured correctly. Try to remove the controller and reboot the device. After this check again in Device Manager.

    Some external device is connected to the unit by USB ports?

  • CPU upgrade in Satellite 2450-201

    I have a Satellite 2450-201 and it came with a pentium 4 2.4 GHZ.
    What CPU will be compatible? Pentium 4 3.6 GHZ maybe because there is P4.
    Will this work?

    Hello

    To my knowledge the Satellite 2450 series was delivered with an Intel Desktop Pentium 4 processor.
    The desktop Intel Pentium 4 CPU with Intel SpeedStep® technology and processors to run at one of the following speeds:

    2.26GHz / bus speed: 533 MHz
    2.4 GHz / 533 MHz
    2.53 GHz / 533 MHz
    2.66 GHz / 533 MHz
    2.8 GHz / 533 MHz

    Additional info:
    The processor incorporates a 12 KB of L1 cache and 512KB L2 cache memory memory.

    But as far as I knwn Toshiba does not support updates. You have no guarantee that it will work properly

  • Satellite 2450-201: is it possible to upgrade the P4 to Athlon processor?

    I have a satellite 2450-201 and it came with petium 4 I want ypgrade to the athlon 64 x 2 will be this possible upgrade for my laptop?

    No, it is not possible.
    The Pentium uses different fixing like the athlon.
    In any case the portable technology is different because the desktop PC simply and miniaturization make these updates impossible

  • Satellite 2450-201 and the Installation of XP SP2

    Can someone tell me why I can't install SP2 on my laptop? I even tried using the original CD of Microsoft, windows, corrupt and does not have anything else to safe mode. I restored my PC and turned off the automatic updates as I can not on this problem. Why the Satellite 2450-201 does not support XP SP2? (I read this on the Toshiba site)... PLEASE HELP THIS IS SO FRUSTRATING

    Post edited by: Fiona Baker

    Hi Fiona

    I really put t believe that the installation of SP2 is not possible (not supported). Can you please send the link of this page?

    I have installed SP2 on older models that your without any problem. Can you please explain what exactly happens when start the installation of SP2?

    If you want you can preinstall your device using the recovery media and then install SP2 immediately.

  • I need Windows XP for Satellite 2450-201

    Can anyone help me?. Where can I get a copy of Windows XP to a Satellite 2450-201?

    Thank you.

    Felix

    Hello

    You can also install an original Microsoft Windows and then all of the necessary Toshiba drivers. Toshiba stuff you'll find on this site:
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

    If you have decided to use these drivers so please note that a proper installation order is necessary.
    First of all the Chipset utility, common modules, graphics driver, etc.

  • Satellite 2450-201: cannot use TV option after the new installation of the OS

    Hello

    I have a laptop toshiba satellite 2450-201.
    I've always had the TV OUT works well with my TV, use the right cable SVIDEO.
    I was able to watch divx movies in my TV using my computer.

    I had to format the laptop and installed windows XP again.
    After that, I can't use more TV-OUT option, so that the image of the laptop could be seen on television, I've always had.
    After that I updated display drivers, but the problem remains.

    Can someone help me?
    Thank you

    Hello

    How do you reinstall the operating system? Have you used the recovery CD?
    Usually after the reinstallation of the operating system from the recovery CD, everything should work properly.
    It is important that you can switch to the TV. In this case, you can use FN + F5.
    If it's not working so I guess that for display devices hotkey utility works or was not installed. Well, the alternative is to pass on the TV via the graphic properties. The TV option, you should find somewhere in the advanced options.

    However, check it and check if you have installed all the drivers.

  • Re: Satellite 2450-201: insert system disk and press a key

    Hello

    I have a satellite 2450-201 my hard drive failed and I bought a new one.
    I went to do the installation of the OS that worked very well and cancelled before that I had to commit that I had to get out.

    Tried again and it wouldn't boot from the CD it kepps showing the insert system disk and press a key.
    I have attached my external, a drive with a boot in drive but no difference what I am doing wrong?

    Mark has soon

    Looks like you can't boot from the CD.
    The message insert system disk and press any key any appears because the laptop can not find any operating system and bootable CD.

    Try to insert an original Windows CD and try to press F12 immediately after that laptop was on the F12 key should activate the start on-screen menu.

    Check it!

  • Satellite 2450-201: how to increase the video memory from 32 to 64 MB?

    Can anyone help? I looked in the Bios and the advanced settings screen, and found nothing to increase the size of the video memory.
    Any other way to find on my Satellite 2450-201

    Hello

    As far as I know that the unit has been delivered with the NVidia GeForce4 420Go 32 MB graphics card. This isn't a memory sheared graphics card.
    The card supports the own memory and not a function of memory sheared.
    In this case, you cannot change the value of memory.

Maybe you are looking for