Re: Satellite 2450-201: WLan reconnects if driver GPU has been installed

Similar Questions

• Satellite 2450-201: replace the optical drive.

  Hi, the drive combo DVD in my satellite 2450-201 has recently stopped reading dvd

  Hello

  If I remember correctly your unit select a bay and you can remove the easy DVD player. In the lower corner, you will find SlimSelectBay latch. Move to position undocking and carefully remove the disc.

  The disc is set to SlimSelectBay. I have gift? t remember exactly how many screws are there but the disassembly procedure is not complicated. Check it!

• Satellite 2450-201: installation new multi drive DVD - RW

  INSTALLED NEC ND - 6750A DVD PLAYER MULTI ON MY LAPTOP OF 2450-201.
  DEVICE IS NOT RECOGNIZED - THE NOTEBOOK STARTS UP OK OTHERWISE.

  HOW TO SOLVE THIS PROBLEM.
  HELP & GREATLY APPRECIATED TIPS.

  Hello

  It's very strange because the BIOS recognizes the drive but not the Windows operating system
  I assume that you have installed the "multi DVD ND - 6750A reader" but you do not 'Refresh' of the Win OS.
  I'm not 100% sure but I think the operating system driver is responsible for this issue.
  I recommend reinstalling the operating system. Maybe the operating system makes it possible to recognize the DVD drive.

• Error: Device driver software has been installed correctly

  I built a new desktop computer and installed Vista x 32 last summer.  I had no problems until recently, when I tried to plug in a flash drive a friend and Vista has problems to install the driver.  I received the message:

  Windows encountered a problem installing the software driver for your device
  Windows found driver software for your device but encountered an error trying to install it.
  USB mass storage device
  Not enough memory is available to process this command.

  I ended up plugging the flash drive on my laptop and transfer the files to my desktop on my home network.  The second problem occurred a few weeks later, when the internal memory card reader that I had installed has stopped working.  I thought it was a driver problem, so I uninstalled the device by using Device Manager and restarted my computer, thinking that the plug-and-play device should be automatically reinstalled.  Upon reboot, Vista tried to reinstall the device and ends with a similar message to what I had received for the flash player.

  I was determined to get my pictures on my computer so I plugged into an external USB card reader.  I received the same message when trying to install it.  Finally, I tried to plug directly into my Canon SD880IS, but again received the message.

  Does anyone know why Vista does not recognize one of these USB devices?  I tried a variety of USB ports on my computer without success and everything that I had already installed works always.  I'm not sure what the message is referring when he said "not enough memory is available to process this command."  I have 151 GB free on my disk system and 4 GB of memory installed.

  Thanks in advance!

  spritemv, do a SFC scan for me, let's see what are the results:

  The System File Checker tool:

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. Right click on cmd in the list programs, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click on continue
  3. At the command prompt, type the following command and press ENTER: sfc/scannow
  4. When the analysis is complete, test to see if the problem you are experiencing is resolved.

  Although your question could not be linked with protected system files, I check if you have any other corruptions on your system.
  It maybe your Windows Installation has picked up corruption over time by the program facilities.

  To continue:
  What happens when you start with a card inserted into your card reader, memory does make a difference of recognition?
  If it is a device that you have personally installed, you can check the OEM for any possible driver update, we can use?

  Check the status of the device and the driver Version:

  1. Open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. Double-click the category containing your device driver, and then double-click the device name.
  3. Check the status of the device under the driver tab click on general tab, check driver provide Date of the driver, the driver Version, digital signer. Please provide this information.
  4. Click OK, exit Device Manager.

  See if you can completely uninstall and reinstall your card reader who follows the steps, please check the categories for the time installed thumbdrive you mentioned to see if we can remove that as well:

  Uninstall the drivers of hidden devices:

  1. Click Start-> click all programs-> on Accessories-> right click on command prompt, select run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  2. At the command prompt, type the following commands (press ENTER after each):
  3. SET DEVMGR_SHOW_NONPRESENT_DEVICES = 1
  4. devmgmt.msc
  5. When in Device Manager, click view and then show hidden devices
  6. Expand the category that contains your device, and then double-click the name of your device.
  7. Click the driver tab and then click on uninstall.
  8. If there is remove the software this box of the device driver, check (make sure that you have an internet connection so that you can buy these drivers). Read and confirm notification, click OK.
  9. Quit Device Manager and restart your computer.
  10. You will be asked at new hardware detected. Select search and install the driver software. Check permissions. Windows will now search for the driver for your hardware and reinstall.
  11. Retest the device

  In regards to your iTunes message, see if the disassembly of the upper and lower filters apply to your situation:

  Delete upper and lower filters

  Click Start-> click on all programs-> on accessories-> click notebook.

  Copy the following commands, and then paste them into the opened Notepad window:

  Reg export HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}-%userprofile%\desktop\FiltersBackup.reg
  reg delete HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}------UpperFilters f v
  reg delete HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}------LowerFilters f v

  On the file menu, click Save as, and then type DeleteFilters.cmd

  Click on save as type and select all files (*. *).

  Save the DeleteFilters.cmd file to your desktop.

  Right-click the DeleteFilters.cmd file, and then click Run as administrator. If you are prompted for an administrator password or for confirmation, type the password, or click on continue.

  Try to install updates again.

  Notes

  After running this script, all custom CD/DVD filter drivers installed programs maybe isn't able to use your CD/DVD until your reinstall these programs. If the script command solves the problem, you can restore your custom CD/DVD filter driver by double-clicking on the FiltersBackup.reg that the command script exports to your desktop. If the problem is resolved, delete the DeleteFilters.cmd file that you created.

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite 2450-201: nVidia display driver

  I just downloaded the latest driver from nvidia display for satellite 2450-201 of toshiba and now the screen went worse the driver is 3.6.4.8. for nvidia gforce 420 go what I'll do I tried to roll back, it won't let me! and I have not a system restore point nor is there some settings using nvidia!

  Hello

  I checked for your device and Toshiba download page, there is only one display pilot available (v 36,48). Can you please tell us what version number has this driver and where exactly did you find?

  Try to uninstall it from the Device Manager, restart the device and install version 36,48.

• Satellite 2450-201: update driver DVD - IDE #1 error

  Hello

  I need help to upgrade the dvd for my laptop model Satellite 2450-201 with internal dvd writer.

  I have LG and I got this message at startup: error IDE #1. Any suspicion that I speak with Dep. error tech and he said that the problem of compatible driver. I think that good performance with the system.

  If I update the bios from 1.3 to 1.5 it will solve this problem?
  Or do I need another brand name model to replace the old DVD with DVD - RW?

  Hello

  As someone from the tech, adj. suggested that this error message appears because the car is not compatible.
  The disc has a bad master/slave setting and so the BIOS can not recognize the drive.
  To resolve this problem, you must upgrade the laptop with compatible player.

  I found a compatible Toshiba PA3255U-1DV1 DVD-RAM drive. But this isn't a burner.
  I suggest to contact Toshiba service partner in your country to control the compatible player and supported. So you can be sure that you will get a good player.

• Satellite 2450-201: USB 1.1 instead of 2.0 controller

  I formatted the hard drive on my Satellite 2450-201 and loaded Windows XP SP2. I loaded all the drivers from the disk utilities and everything works well except the USB ports work only in 1.1 instead of 2. There is a yellow exclamation point in device on USB controller Manager. I tried a Toshiba download driver but there is nothing available.
  Can someone suggest a soloution to this problem.

  John

  Hi John

  As far as I know that there is no driver for USB controller. When you install the chipset driver all USB ports should be recognized correctly. Exclamation mark in Device Manager is an indication that the device is not configured correctly. Try to remove the controller and reboot the device. After this check again in Device Manager.

  Some external device is connected to the unit by USB ports?

• Satellite 2450-201: slow startup and shutdown

  I HAVE A SATELLITE 2450-201 AND I RUN ON WINDOWS XP HOME EDITION, I DID A REGISTRY CLEANER EVERYBODYS USERNAME USING REGISTRY FIX 5.5
  I HAVE DEFRAGED MY PC AND ALSO OPTIMIZED MY MSCONFIG STARTUP ITEMS AND EVEN THE BIOS UPDATE.
  THE RESULT IS EXTREMELY FASTER WHEN I CONNECT AND ACTUALLY UNDER WINDOWS BUT THE SAME OLD VERY SLOW STOP AND START TO WHAT I DO.

  THE WINDOWS BAR GOING ALONG AT LEAST 15 - 20 TIMES TO HELP START!

  Hello

  Maybe you've connected to some external devices to slow down the start-up procedure. You can also try to disable all the hardware components you n t need (modem. IrDA). Also check out which device is defined in a first start time (I hope that the HARD drive).

  For slow closing is responsible only running processes that should be forced disconnected. It all depends on your own configuration and you are using external devices.

• Question about DVD watching on Satellite 2450-201

  Hi, I have a satellite 2450-201.
  and I'm sure that when I had it first I could watch DVDs, s without having to start, only now, when I try this the computer starts completely before it will play, now perhap it did this before but I didn't take so long to start, because there was not much on it to slow it down, what I want to know is : is it possible or just my imagination, if not how to reset it please.
  Thank you in antisipation
  Pete

  Hi Pete,.

  You don't say what operating system you have. To watch DVDs without having to start you would need to have Windows installed MCE. He would use a small area of your hard drive to store the necessary software to allow you to play DVDs without having to start your main operating system.

  If you have XP (Home or Pro), then it is more likely that your startup process now takes longer than before so that you can start your DVD software. In this case check for unnecessary tasks or processes by using the Task Manager and I would also recommend spyware scanning, removing everything you find and run Defragmenter and disk cleanup.

  HTH

• I need Windows XP for Satellite 2450-201

  Can anyone help me?. Where can I get a copy of Windows XP to a Satellite 2450-201?

  Thank you.

  Felix

  Hello

  You can also install an original Microsoft Windows and then all of the necessary Toshiba drivers. Toshiba stuff you'll find on this site:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  If you have decided to use these drivers so please note that a proper installation order is necessary.
  First of all the Chipset utility, common modules, graphics driver, etc.

• SD 2 GB card is not readable on the Satellite 2450-201

  I have a satellite 2450-201 with a slot for sd card, when I insert a kingston 2 GB sd card it read doesn´t.
  What could do?
  The sd card Don t have a problem.
  I think that something the perhaps pilots is an upgrade, but I can´t find it anywhere.

  Post edited by: alcoolpuro

  Hello

  You are right. There is no update available. At the moment where the device was on the market, the card 2 GB SD was not available.

  This device is very similar with 5200 Satellite and you can try to use the SD card of her driver. It should be version 2. 0 2. I really don? t know if this can help, but you can try it.

  Otherwise, I really don? t know what you can do about it.

• Re: Satellite 2450-201: insert system disk and press a key

  Hello

  I have a satellite 2450-201 my hard drive failed and I bought a new one.
  I went to do the installation of the OS that worked very well and cancelled before that I had to commit that I had to get out.

  Tried again and it wouldn't boot from the CD it kepps showing the insert system disk and press a key.
  I have attached my external, a drive with a boot in drive but no difference what I am doing wrong?

  Mark has soon

  Looks like you can't boot from the CD.
  The message insert system disk and press any key any appears because the laptop can not find any operating system and bootable CD.

  Try to insert an original Windows CD and try to press F12 immediately after that laptop was on the F12 key should activate the start on-screen menu.

  Check it!

• Satellite 2450-201: how to increase the video memory from 32 to 64 MB?

  Can anyone help? I looked in the Bios and the advanced settings screen, and found nothing to increase the size of the video memory.
  Any other way to find on my Satellite 2450-201

  Hello

  As far as I know that the unit has been delivered with the NVidia GeForce4 420Go 32 MB graphics card. This isn't a memory sheared graphics card.
  The card supports the own memory and not a function of memory sheared.
  In this case, you cannot change the value of memory.

• Need new hinges to Satellite 2450-201

  The hinges on my * Satellite 2450-201 * are turned away.
  Are the hinges on the - 101 previous model the same i.e. P000368300 and P000368310 and if so, are still available. If not, can anyone advise please.
  Any info gratefully received.

  Hello

  I think you should get in touch with a local ASP (partner).
  The ASP can help you order the right parts.

  Because this laptop is an oldie, I doubt that you get these pieces from an online retailer
  However, google may provide you with some offers if you are looking for unique part numbers

  In any case, all the possible parts could be ordered in service partner as I said above, for me, it looks like an easier way to get these parts.

• CPU upgrade in Satellite 2450-201

  I have a Satellite 2450-201 and it came with a pentium 4 2.4 GHZ.
  What CPU will be compatible? Pentium 4 3.6 GHZ maybe because there is P4.
  Will this work?

  Hello

  To my knowledge the Satellite 2450 series was delivered with an Intel Desktop Pentium 4 processor.
  The desktop Intel Pentium 4 CPU with Intel SpeedStep® technology and processors to run at one of the following speeds:

  2.26GHz / bus speed: 533 MHz
  2.4 GHz / 533 MHz
  2.53 GHz / 533 MHz
  2.66 GHz / 533 MHz
  2.8 GHz / 533 MHz

  Additional info:
  The processor incorporates a 12 KB of L1 cache and 512KB L2 cache memory memory.

  But as far as I knwn Toshiba does not support updates. You have no guarantee that it will work properly