Satellite A100-62 of the bios, you see only not 4GiG ram?

Similar Questions

• Satellite L350-262 - you see only not WiFi

  Satellite L350-262, you see only not the wireless networks in any place. Can get access to the Internet via LAN. Has suddenly stopped working. Suggestions gratefully received

  Thank you
  Nick

  Can any of you provide the most relevant information?
  Wireless network card is listed in the Device Manager?
  Wireless network card is installed correctly it?
  Can you turn on/off wireless card using the FN + F8 key combination?

  Have you tried to do something to fix this? If so what exactly?

  Hey guys how to discuss something like this if your description of the problem is one sentence only.

• Satellite A40: How update the BIOS because I only have half of the Bios

  Hi guys

  I went to the local with my satellite A40 computer store because I only have half of the bios!
  I sent an email to support technique German toshiba and they said to try a bios update (which put bare in mind I still don't know how to do), then we have sent my laptop in a local computer store and told them the problem they do not put me to update the bios on a processor cempron.

  Why not? What are the risks in need to know.

  Please help me because I want to in the future might be upgraded to vista?

  Hello Daniel,.

  I'm a little confused about your message from Mr.
  What do you mean with half of the bios is enough?
  What s wrong with the BIOS?

  The support from Toshiba said-> try a BIOS update.
  On the Toshiba page, you can download the BIOS for Satellite A40.

  It seems you didn't check the download page detailed because on this page you will find this statement:
  IOS http://eu.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?z=234&service=eu&from=faq_selection&CFID=B & FID = TRO0000000b07

  The update of the BIOS has been detailed described in this document and that you follow these guidelines for the update of the BIOS.

  Good bye

• You see only not the media files to ingest prelude

  I captured files to external hard drive camera mpeg video. Open a prelude to ingest, but prelude is only to see the folders, not mpeg go insde records. No videos of all kinds, actually. Shows just a list of my records, but none of the mov, mp4s or MPEG inside any folder. Discouraging.

  Any help would be appreciated.

  Thank you.

  Todd

  The left side of the dialog box ingest lists that the drives and folders, display the files in a folder, select the folder and the files it contains will be displayed in the middle section of the dialog box ingest. From there, you can select the check box for the files you want to ingest, adjust your transfer (right) as appropriate, then click on the button to ingest to get them as a prelude.

• You see only not the GPU under NVIDIA GRID vGPU profiles

  I followed the Guide of deployment of NVIDIA.  I installed the vib successfully on ESXi hosts and executed a command of nvidia-smi to confirm.  All right.  When I change the settings on the Image of gold, I see the attached picture.  What I am doing wrong?

  In addition, a potential problem may be allowed.  I see the GRID is supported only on vSphere Ent more and we run vCloud, vSphere Advanced Suite.  This is the first time that I never see this type of license.  Could it be the culprit?

  Thanks in advance for the help.

  I was able to understand.  I installed bad NVIDIA vib. I used the vSGA rather than vGPU drivers drivers.

• Windows XP, you see only not all files in Windows 7 shares

  I see an embarrassing problem that occur on two different sets of machines on different networks.  The initial symptom that led me to study was that software synchronization third laptop XP Pro SP3 computer a user has acted improperly, saying that some files in directories on a Windows 7 Ultimate 32 bit computer were gone, but they really were.

  I traced the problem in several directories on the Windows 7 machine display incomplete content seen on the XP machine network.

  For purposes of explanation, //Desktop/Folder is a share on the Windows 7 computer, which has 167 files it contains.  If you open this share on a networked XP Pro computer, it shows only 140 files.

  For example, File1.doc and File2.doc are both in this shared directory on the Windows 7 computer.  However, on the XP machine, File1 does not appear in the directory.

  On the Windows 7 machine, File1.doc and File2.doc are identical regarding permissions and attributes.  The only differences are the size and creation date.  Look at the rest of the 27 "missing" files in this folder, the results are the same - I see no difference.  The files are not password-protected.

  I have reproduced this exact behavior with the same data on different machines with the same operating systems.  All machines are completely up to date with respect to updates.  There is no detected malware on any of them.  They are on the same workgroup.

  This change in behavior has happened apparently quite recently that the user had no problem with the synchronization software for laptop until last week.

  Can anyone suggest what could happen here?

  Thanks for your reply, Jonathan.

  I traced the problem to Avast (any flavor).  It turns out that it's a known problem, but not a single notice of too many people.  It is really so when you try to run the software of synchronization between two networked computers and directories that you synchronize are affected by the bug of Avast as the synchronization software performs a very detailed comparison.

  When I uninstalled Avast on the source (Windows 7) XP machine could see all the files in all the network shares.  When I reinstalled Avast, the problem returns.

  I have a ticket in Avast on this problem.

• You see only not iscsi LUN, attaching to add storage

  I'm newish to the whole thing vmware/iscsi, but got it to work once.

  Environment:

  HB BL460c (32 GB of ram, 2 x local 146 GB SAS HD, nc382m HBA)

  vSphere ESXi 5.1

  MSA2012i (12 x 1 TB HD)

  I created a vswitch (VMkernel Port) to port1 of the nc382m (vmnic2) and then added the virtual iscsi adapter to connect to them.  A re-scan one I could add the LUNs available on the MSA as storage on the esxi host.  Everything was fine.

  But, I created a second logical unit on the MSA number (it is shared to all hosts) and I re-scanned on the esxi, but when I try to add storage no LUNS are listed.  I followed the same procedure as the initial installation, which worked fine and now no joy.  I searched the forums for ideas but not so far seems applicable, since I was able to do this for a single logical unit number but can now add a second logical unit number.

  Kind regards

  Marshall.

  The issue has proved to be a bug/flaw in the MSA.  The MSA I use has only a single controller/processor storage and apparently regardless of whether it has one or two SPs it assigns new vDisks of alternately between both SPS 'potential '.  So in my case the first vDisk was entrusted to SP - A and worked beautifully.  The second vDisk was assigned to the same SP - B hard did not exist.  Therefore, it was not visible for ESXi hosts.  Change of 'ownership' of the second vDisk lun was visible on the ESXi host.

  Here is a link to HP Customer Support Advisory about this behavior:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=3687128&prodTypeId=12169&ObjectID=c01470001

• Time Machine, you see only not the ssd internal

  Today, I had my old OWC replaced for a bigger Samsung 850 EVO SSD SSD internal flash drive.

  I named the new SSD, the same as the old.

  The new SSD is the boot disk and it works without problems.

  But now I see that Time Machine does not see this new SSD (he did see and save the old).

  This rather new Samsung SSD is not supported by Time Machine and therefore not show under the volumes available?

  I already tried the following Terminal command:

  : write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1

  But no success with that and in my case it is an interior volume, perhaps the command is wrong then?

  Or am I mistaking here and are the Time Machine preferences "Select disk" only discs showing where you can save to and not FROM (in the 'Options' section, you can exclude certain things and it shows the disc)?

• Adding a user to a role, you see only not the role permissions

  Hi all

  Simple question HERE and frustrating because it seems so easy... Oracle 11 G 64-bit (11.2.0.3) on Windows

  I created a role and a user as follows:

  CREATE USER TEST_USER
    IDENTIFIED BY <password>
    DEFAULT TABLESPACE USERS
    TEMPORARY TABLESPACE M_TEMP
    PROFILE DEFAULT
    ACCOUNT UNLOCK;
    -- 1 Role for TEST_USER 
    GRANT INTELLIWAVE TO TEST_USER;
    ALTER USER TEST_USER DEFAULT ROLE NONE;
    -- 1 System Privilege for TEST_USER 
    GRANT CREATE SESSION TO TEST_USER;
  

  The role is:

  CREATE ROLE INTELLIWAVE NOT IDENTIFIED;
  -- Object privileges granted to INTELLIWAVE
  GRANT SELECT ON SCHEMA1.ERROR_LOG TO INTELLIWAVE;
  -- Grantees of INTELLIWAVE
  GRANT INTELLIWAVE TO TEST_USER;
  GRANT INTELLIWAVE TO SYS WITH ADMIN OPTION;
  

  Now when I use the Toad and sign in using the TEST_USER user, I can connect fine but if I try to choose among this SCHEMA1. Table ERROR_LOG, reads table/view does not exist. And when I check the tree of the scheme under the scheme, I don't see this table under that user. It is there.

  What Miss me?

  Thanks in advance!

  It seems likely that the new role is not enabled in the session. Try

  SELECT * FROM SESSION_ROLES;

  While signed in as a user. The new role appears?

  I don't see EDIT USER by DEFAULT ALL ROLE; in your script CREATE USER.

  I don't see EDIT USER by DEFAULT ROLE INTELLIWAVE;

  For example, if the role is not one of the default roles for the user (via one of the above) then you will need to deliver the VALUE ROLE INTELLIWAVE. or the ROLE ALL VALUE; to access privileges granted to this role. The SET ROLE command affects only the current session.

• You see only not the cmdlets in the Basic module

  Hello

  Just installed PowerCLI 6.0 on Windows 10 and when I run get-module, it shows all of the PowerCLI. modules get-vicommand display the cmdlets from DeployAutomation and ImageBuilder but none of the vmdlets of the base module. I'm missing something here... Thanks in advance...

  Hi birdylarry,

  
  

  I recently installed PowerCLI 6.0 R3 and I ran just the command "Get-Module", and it displays all the modules, we have as follows:

  PowerCLI C:\ > Get-Module

  Version of Moduleinfo name ExportedCommands

  ---------- -------    ----                                ----------------

  0,0 Initialize script - VMware.VimAutomation...

  0,0 Initialize script - VMware.VimAutomation...

  Script Initialize-VMware_VimAutomation_Cis 0.0

  Script Initialize-VMware_VimAutomation_Vds 0.0

  Script Initialize-VMware_VumAutomation 0.0

  Manifest 3.1.0.0 Microsoft.PowerShell.Management {Add-Computer, Add-Content, Checkpoint-Computer, Clear-Content...}

  Manifest Microsoft.PowerShell.Security 3.0.0.0 {ConvertFrom-SecureString, ConvertTo-SecureString, Get - Acl, Get-Auth

  Manifest 3.1.0.0 Microsoft.PowerShell.Utility {Add-Member, add-Type, Clear-Variable, Compare-Object...}

  Clear Microsoft.WSMan.Management 3.0.0.0 {Connect-WSMan Disable-WSManCredSSP disconnect-WSMan, Enable-WSMan

  6.0.0.0 binary VMware.VimAutomation.Cis.Core {connect-CisServer, disconnect-CisServer, Get-CisService}

  6.0.0.0 binary VMware.VimAutomation.Cloud {add-CIDatastore, connect-CIServer, disconnect-CIServer, Get-catalog

  VMware.VimAutomation.Core script 6.0.0.0

  6.0.0.0 binary VMware.VimAutomation.HA Get-DrmInfo

  1.0.0.0 binary VMware.VimAutomation.License Get-LicenseDataManager

  6.0.0.0 binary VMware.VimAutomation.PCloud {PIServer connect, disconnect-PIServer, Get-PIComputeInstance, Get - P

  Clear VMware.VimAutomation.Sdk 6.0.0.0

  6.0.0.0 binary VMware.VimAutomation.Storage {Get-NfsUser, Export-SpbmStoragePolicy, Get-SpbmCapability, Get-PAF}

  6.0.0.0 binary VMware.VimAutomation.Vds {add-VDSwitchPhysicalNetworkAdapter, add VDSwitchVMHost, export-VDPo

  1.0.0.0 binary VMware.VimAutomation.vROps {Connect-OMServer, unplug-OMServer, Get-AlerteOM, Get-OMAlertDefi

  6.0.0.0 binary VMware.VumAutomation {add-EntityBaseline, copy-Patch, Get-Baseline, Get-compliance...}

  See if your system has some problems. I am running on Windows 7 PowerCLI.

  Also, look for this:

  Local operating system support

  You can install VMware vSphere PowerCLI 6.0 Release 3 on the following operating systems:

  OS type	64 bit
  Server	R2 Windows Server 2012 Windows Server 2008 R2 Service Pack 1
  Workstation	Windows 8.1 Windows 7 Service Pack 1 Reference: for vSphere PowerCLI 6.0 Release 3 compatibility charts

• You see only not the vExpert in my profile option

  Hi all

  I want to add a vExpert tag in my profile but I don't see the option vExpert box in my profile, what is someone has the same problem? How do I get it added, I sent an email to [email protected] but no response form them.

  Thank you

  It will automatically appear as the announcement was that I would give him a few weeks later-

• Horizons, you see only not the ThinApp packages

  Start by giving a very high level, then please let me know what additional information is needed.

  I'm under the last programme ThinApp and release of newer Horizons. I have upward and running Horizons and authenticating to the domain. I have setup ThinApp and if running on an XP machine. I have run the basic analysis, then I install 7zip for example. I then copy the contents of the bin for one directory. When I try to synchronize Windows applications, I get nothing, I see is in the newspapers

  Date: Monday, July 16, 2012, 19:01

  Category: import

  Info: From import cycle. (: share: name of \\)server) \IT\Horizons_Test.

  Any thoughts as to why this happens, because I am very new to that I apologize for the lack of information but cannot anyswer of the questions for that to be resolved

  Thank you

  Hello.

  You have to put them in separate folders, using your example, as it should be:

  \\server name\IT\Horizons_Test\7zip\7zip.exe

  and create a folder for each application, such as:

  \\server name\IT\Horizons_Test\vlc\

  Linjo

• You see only not parameters of Amazon in the Native DPS application builder

  He supported to Amazon subscriptions get recently taken from the DPS native Android App Builder?

  It seems that last week, there are two check boxes in the In - App purchase page, but there are now only "Enable GooglePlay in-app-purchase".

  Thank you

  Darrin

  Yes, this option has been removed with the release of v30.1. There is more information in the article What's new in this version .

• You see only not the menu 3d in Photoshop CC

  Hi all

  I just installed the 64-bit version of Photoshop CC on my Dell Inspiron with graphics chip 525 m 1 GB gforce can I Pro 8 64-bit running. The problem is that I do not see the menu 3d. If go to the performance in the preferences tab, I see that photoshop detects my card correctly. What could be the problem? Have they moved the menu somewhere else?

  A clean reinstall fixed the problem for me

• Rendered in HTML, you see only not the < b > tags

  Hi guys... I need emergency here.  I have several paragraphs of text that uses the scrollBar component to give me an ability to scroll... this part works fine.  I have also the box "render text as html" checked because I have a current HTML formatting.  In any case, all of a sudden the published SWF file started to ignore the "BOLD" < b > tags.  It used to work fine.  Now, everywhere where I have the text surrounded by HTML < b > tags, it just fails that part of my copy once the file is published.  When I change the < strong > tags, the text comes back, but in a normal font... not in bold.

  I tried two ways... with the embedded fonts and without... nor made a difference with this problem.  I also tried the control box and uncheck the "render text as html" and that doesn't seem to make a difference. This "BOLD" tag is obsolete?  I have trouble getting a display in bold font.  The code is below.

  var stringWithHTML:String = ' < p > < b > The Dream Team: < /b > draw us from industry experts to meet the needs of our customers. Our dream team includes gurus of relations of media that will not be hung up, the creators that make creativity seems easy and brand enthusiasts ideas that stick. < /p > < br > < p > < b > Molly Lynch, < /b > self-proclaimed Jack of All Trades: with 10 years of experience in the field of communication, Molly has held positions at the top PR firms in the world, including in the world of Publicis, Ogilvy Public Relations and Weber Shandwick. Centers resort to real estate and fashion to dealers, Molly managed accounts in a variety of industries and is proud of his work on relations with impeccable customer, strong attention to the slightest detail and unyielding persistence. Molly has landed customers in countless of broadcast and media, including the Associated Press, CBS Early Show, Chicago Tribune, Newsweek, printed Cooking Light and Parenting magazine. She consults frequently with friends of the Agency in the city, including the CSC Grossman, reputation partners and MS & L.  "Follow Molly on Twitter at < a target ="_blank"href ="http://www.twitter.com/mollylynch"> < / p > '; '.
  aboutUsCopy_txt. htmlText = stringWithHTML;

  Thank you very much!

  You are welcome.