Satellite A100-998: Blue error screen - nv4_disp.dll infinite loop

Similar Questions

• Satellite A100-998: continue Error Message «Power surge on USB hub»

  Hello world.

  I am the new owner of a Satellite A100 laptop that has a little problem.

  When the laptop goes into mode and the monitor shutsdown, energy saving when I turn on the computer again, I always get an error message will appear in the system tray. The message says: peripheral USB A "Power surge on Hub Port" exceeded the limits of its hub port power. To solve the problem, click this message.

  First of all, I have 4 USB ports, but NONE of them are used. There's nothing attached to the laptop at all.
  Secondly, when I click on the box, I get 5 unknown USB devices shown with the yellow question mark next to them in the list and 3 unused ports, which seem to be ok, with no yellow question mark.

  Why is happening, with no device attached, or even installed on the laptop.

  Your help to solve this problem will be more appreciated.

  Rgds
  Neil.

  Hello, Neil

  What model of laptop you have exactly (A100-xxx)?

• Satellite Pro A60: Blue error screen

  I got my satellite pro A60 laptop for about 6 months and, recently, a blue screen started flashing up to white writing scrolling down really fast and then the laptop restarts. I don't have the time to read what says the writing of this article. Can someone give me advice on what this could be and how to solve the problem?

  Thanks in advance.

  Hello

  Well, the simple is to reinstall the operating system. But if you wish, you can disable the function of Windows Xp to automatically read this massage of error on reboot.
  Go to system in Control Panel. Then the Advanced tab. In the announcement of the Startup Recovery section press set button. You need to disable the option automatically reboot.
  But it of very difficult to understand the error blue screen for ordinary users.

  Good bye

• Satellite A60 - 102 - Blue error screen appears on the screen and the system to reboot

  Error on blue screen sometimes display on screen and reboot system

  How can solve this problem

  Hello

  BSOD code, you get exactly?
  What operating system you are using?

  Maybe it's a driver problem. Have you checked for yellow exclamation marks Device Manager?

  You can start in safe mode?

• Blue error screen advapi32.dll on startup

  Restarted the laptop to finish installing a new update for itunes and other apple products. Has been sent to a blue screen at startup which said:

  STOP: c0000135 {Unable to locate component}
  This application has failed to start because ADVAPI32.dll is not found. Reinstalling the application may fix this problem.
  Have tried rebooting in safe mode options, tried to fix the problem and I tried to debug only to be sent back to this screen each time.
  Do not have a boot drive for the Vista operating system.
  How can I fix?

  Hi Emily,.

  Thanks for posting the question in the Microsoft Community!

  Method 1:

  I suggest you check out the link to use the System File Checker tool (sfc) to troubleshoot missing or corrupted system files in Windows using the command line in options for system recovery.

  Method 2:

  I suggest you try to do a restore from WinRE (Windows Recovery Environment) system and check if it helps.

  To perform the WinRE you must insert the installation disc:

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Let us know if it helps.

• Satellite L675D: Blue error screen after upgrading to Windows 8

  Hello

  I recently updated my laptop to Windows 8 Toshiba and whenever I use it, after 5-10 minutes, I get a page of the Blue error screen and restart the laptop.

  The problem is really annoying.

  I discovered that if I plug the battery charger, the phone works normally, but I want to solve the problem correctly.

  What should I do?

  I m wondering about your model of laptop. What cell phone do you have exactly?

  Regarding your question:
  I would like to get this right, with the battery it works ok, but when the AC adapter is plugged, it crashes?

  What happens when you connect the front adapter from the laptop would be turned on?

  How have you installed the Windows 8? Move the laptop Win 7 to Win 8 or have you installed Windows 8 clean system?
  Are installed all the drivers Toshiba Windows 8?

  Another idea:
  Go to Windows 8 Device Manager and uninstall the device called compatible ACPI control method battery
  Restart the machine and check how it works.

• Satellite M30: Blue error screen - how to diagnose what it is?

  I have a hardware problem, but I'm not sure of the exact nature. Even if I look like the hard drive or something to communicate with her.
  About two weeks ago, I started to notice performance problems when loading something from the internal hard drive: overall function of the computer (such as the movement of the mouse, mp3 playback) became embarrassed when the hard drive was loading (economy was less of a problem).

  This was NOT the case when loading data or execution of programs from a disk usb external hard. Today, I got a blue screen informing me that this accident was probably due to new hardware or software, followed by a physical memory dump and a severe judgment. I restarted the computer, but had the same problem after the login screen.

  Trying to boot into safe mode does not work either and after some tests it never got to the login screen more - a few seconds after the beginning of boot there was a flash of a screen blue, followed by an immediate halt.
  In any case, I used the recovery dvd - rom product but the problem is still there, which means that I can start now but I get the same blue screen every hour at least (seems to correlate with usage).

  Instead of running off to buy a new hard drive I want to be sure this is the problem (alone), and not a problem of motherboard or what have you.

  Where my question: how I can diagnose what's wrong with my laptop?

  Hello

  Well, if you n t have no experience in hardware or laptops so it of not easy to locate the fault.
  As jmatthews says you can try to check the Blue error screen. If you google around you will find also information about this error massage.

• Its virtual does not support my Satellite A100-998 with Vista

  Hello.

  I have the Satellite A100-998, and yesterday I find for my driver the new laptop. I download Virtual Sound to my laptop and for vista, and when I try to install the driver that I have error "Toshiba Virtual Sound can't stand your computer." Why

  PS. Sorry for my bad English, but please help me!

  Hello

  I think the problem is that your computer has a sound card, which was designed for XP and not Vista. Thus, you need to download a special driver
  to make the Gizmo work.

  Try here:

  http://209.167.114.38/support/download/ln_byModel.asp

  and tell us if it worked.

  Welcome them

• Satellite A100-998: Vista - cannot play DVDs with Media Player and WinDVD

  I just upgraded my Satellite A100-998 to Vista. Nothing but problems. I can't play DVDs with Mediaplayer because my "video card does not meet the minimum memory requirement of 64 MB of RAM video.
  He tells me to update the video driver or install a new video card.

  I can't use Intervideo WinDVD to play discs because wnaspi32.dll is missing. I can download it on the web, but it becomes just as much as my office. Anyone know where I should put wnaspi32.dll and how much?

  Someone had this problem? How did you solve this problem?

  Thank you.

  First of all, I must say that I haven't noticed these issues after the installation of Vista. I installed it on the A100 and everything went correctly
  I put t know if you use a graphics driver right but necessary for correctly working Vista.

  The user Scooby1966 has posted a nice Vista tips:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=22503

  By the way: is the file wnaspi32.dll driver ASPI Nero burning application could install it. If you use Nero try to reinstall this app

• Can not resize the partition on the Satellite A100-998

  Hello
  I am owner of toshiba satellite A100-998 with 200 GB hard drive. By default there is only 1 partition on the HARD drive when I try to resize this partition and create another 8 partition magic shows me error that it cannot write to the boot sector and it fails. I didn't install any software on this computer and it has the latest version of the bios.

  Ranish partition Manager displays the same error.
  I don't know what the problem is because I've done similar operations on multiple computers with all the problems.

  Thanks in advance for any suggestions

  Hello

  I also use the magic of 8 Partitions for creating and management of simple partitions on the HARD disk.
  But I wonder about the size of your HARD drive. As I know the Partitions Magic 8 does not support 200 GB HARD drive. I didn t to test but the partitions on the manufacturing site manual says it does not support.

  However, sometimes, I had similar problems with my 80 GB HARD drive. The simple solution was to defragment single partitions.

  I put t know if it will help you because of you HARD drive size, but you can try it.

• Satellite A100-998 - Dual View possible?

  Anyone ever have Geforce Go 7300 working in dual view with external monitor?

  The thing is that I need my external monitor as a main display and the laptop up as a secondary. Is this possible?

  I was able to set the display mode double with my laptop as main display screen, but this isn't what I want. I'd appreciate any help, because I struggled to solve try for centuries...
  My laptop is Toshiba Satellite A100-998.

  Hello!

  Of course, it of possible to adjust the secondary display as primary monitor.

  Go into the display properties > settings, then choose the second monitor. There is an option to use this device as the primary monitor and score it.

  Good bye

• Low noise Satellite A100-998

  Hello

  I bought a satellite A100-998 with Harman/Kardon speakers, even if the computer laptop screen at the store had a remarkably high compared to other brands, the machine I bought product a very low sound, although the dial at the front is turned to the maximum & all software orders are set to high? A

  NY suggestions? We advised me to update the audio driver, would this help (but why a laptop bought a few days ago would need to update its drivers?) and I need to update the Bios also, pls help as the low noise is upsetting to me much (not what I expected at all).

  Hello

  I think that the volume on the laptops is a matter of opinion.
  It is really not easy to tell if it s a bad or normal setting.
  Why do you offer that the sound is low? Compare you the sound properties with other laptops?

  Anyway, perhaps you're using really bad setting and only a switching of some controls would increase the sound quality.
  AFAIK the Realtek HD Sound Effect Manager has been installed on this laptop. You should find it in the control panel.

  Here, you can try to change some settings. Wave volume, volume of the CD, everything is possible.

• Need help with the Blue error screen.

  I'm having problems with the Blue error screen at startup which said "less than or equal Driver_IRQL_not. He entered the State of memory dump & black screen after that.  Nothing was abnormal after checking all the drivers in windows 7 Edition Device Manager Home premium. I'm really lost as to what causes it? My computer is a toshiba satellite laptop computer P840 pourrait-someone ' a please advise me on this matter. Thanks in advance for your patience.

  Dear Zigzag3143,

  I finally managed to fix the problem by the chance. I had discovered that this problem was caused by the sypnatics of the laptop touchpad driver. Uninstalled A & reinstall it with the correct driver from the laptop manufacturer websites. Did not expect that it is the cause of all the problems. Thank you for your valuable advice.

• Satellite A100-998 - support 2 GB RAM modules?

  Hello

  I'm looking to upgrade the memory of my laptop. The vehicle currently have 2x1GB modules in the expansion slots. The manual says it takes PC4200 200 pin memory, but does not specify if it will accept 2 GB sticks as this http://www.ebuyer.com/product/164911. It does not mention of the sticks of 256 MB, 512 MB and 1 GB.

  However, I see no reason why he would not support the higher capacity, if I wanted to move to 4-GB memory total. Can someone confirm that this will work? Thank you!

  Andrew

  Hi André,.

  According to the specs on the page of Toshiba, Satellite A100-998 supports 2-GB memory modules. This means that you can install the 2 GB of memory in each memory slot for a maximum capacity of 4 GB.

  For example, I recommend high-quality Kingston modules. I always buy Kingston modules for upgrade and never had any problems.

• Satellite A100-998: mono/stereo mix not available under Vista

  Windows Vista and the Microsoft default value "High definition Audio Device" driver (automatically selected and installed by Setup of Vista), no recording device is listed with the exception of the Microphone, Line In, CD Audio, as in this screenshot of the A100-998 in question:
  http://img230.imageshack.us/img230/1981/a100998jp6.PNG

  No new Mix or record Waveout options of the device, which means that you can not, for example, doesn't record audio stream on the Internet. I tried the latest drivers from Realtek HD Audio for Vista (30/11/2006 R1.52). No change. Is there a way/driver to enable this as in other Windows Vista machines.

  Is also the audio material in the A100-998 "Vista Premium Ready" with the specifications set out in the http://www.optimalsound.net/?

  It's the third disappointment. The first two were that he has not delivered with the announced NVIDIA GF7400 (came to the square with 7300) and the second is that the hard drive is 4200 RPM (instead of the advertised 5400).
  The third issue is the audio issue detailed above.

  Here is a solution I found, but it is not free (costs $US28.20) and requires users to manually switch the "playback devices" each time that they execute it:
  http://www.NCH.com.au/SoundTap/index.html
  Unlike other programs like Audacity which are based on the Waveout/Mono/Stereo Mix as their sound source (and so do not work in this case), NCH SoundTap installs its own virtual driver and is therefore able to record everything you hear through your speakers in Windows Vista without the need for Waveout/Mono/Stereo Mix. "All the sound elements are"typed"by a pilot virtual directly in the kernel, so the process is perfect digital quality."

  However, it would be better that Vista Realtek/Toshiba/Microsoft "High definition Audio Device" driver is updated to include the Waveout/Mono/Stereo Mix (under "recording devices"), so that programs that rely on it are broken. SoundTap can do on Vista means that it is not a hardware limitation.

  PS new Vista sound effects as Loudness equalization, Room Correction, Bass Management and Virtual Surround are already supported in the current drivers Vista (the driver from Realtek v1.52 and that by default by Microsoft) in Satellite A100-998.

  Post edited by: [email protected]_UK