Satellite A100 cannot read the CD burned from different computers

Similar Questions

• Satellite A300 - cannot read the second HARD drive

  Greetings from the Spain,

  I got 1 month there is a serious problem with my laptop (which is 5 months old), associated with crcdisk.sys.

  I gave up after several hours studying, and send the computer serving techniques. (Vista was does not load and no recovery was possible)
  Technical services changed 1 hard drive and the motherboard (don't ask me why)
  This computer cams with 2 HD (these 2 devices)

  The first has a recovery partition.
  The problem now is that I see the second HD (D :) but I can't read or access it.)
  However, McAfee, it can scan and I can see the names of files (they were there before sending it to T.Service) during the scan.

  The only solution I have Toshiba is "send it back", but with the previous experience I've had with this guy, maybe now they put a new keyboard and wait another month...

  Any ideas?

  Thank you

  _Update_

  Now I can read the second disc of Internet expolrer..., i.e. D:\documents... I read a few videos, I got there and seems to work.
  However, I cannot read with ordinary windows Explorer or cannot write files from any program.

  BTW. I can access from the Explorer, but just the files, i.e. d:\documents\letters, but not to the root?

  You have installed the laptop with the recovery disk? Try this!

  What operating system do you use? If you are using Vista control this information from Toshiba:
  http://195.182.196.33/KB0/TSB7101OB0006R01.htm

• Satellite A100 - cannot find the recovery disk to restore to factory settings

  Hello
  I hope someone can help out me?

  I have a Toshiba Satellite A100, model PSAANA-04E005 under Windows Vista Home Premium, Service Pack 1, 32-bit. I am wanting to sell, but have all my programs stuff etc I want to erase files and be able to convey simple with system also when I bought. Memory (purchased January 2007) gave me a Toshiba Recovery with this power drive do something if I needed it's of course is not the case to be foundI.

  Is there anyway I can fix this? All I can download etc to do this?

  Thanks heaps

  Hello

  If you n t find the recovery disk more and you want to restore the original settings, ask an authorized service provider. Guys can put in order a new disc of recovery for you.
  You have the address of the guy?

  Alternative, you can also sell the laptop without recovery disks. Just wipe the HARD drive before selling it with the HARD drive like s boot cleaning tool Darik and nuke or some other program.

  But I think you get a better price if it comes with recovery disks ;)

• Satellite A80: Cannot read the Joint Task Force

  Hi all...

  I have a satellite a-80 w / direct X 9.0 c and I download a game 'Joint Task Force', says the problem:

  Description Mobile Intel (r) 915GM/GMS, 910GML Express Chipset Family
  <0>VendorId 0 x 00008086 DeviceId 0 x 00002592
  <0>Revision SubSysId 0xFF001179 0 x 00000003
  .\3d\Engine.cpp(183): GEngine::Initialize: <0>the card does not support 1.1 shaders
  Your graphics card doesn't support Pixel Shaders or Vertex Shaders.

  the minimum required of the game:
  Windows 2000/xp
  Pentium 1.2 Ghz
  512 MB of RAM
  64 mb DirectX 9.0
  compatible video card
  NVIDIA GeForce 2
  class or higher

  What should do?
  Can I download anything to support the problem or I can't help with that?

  Thanks in advance for your answer

  Hello

  In my opinion the game does not work because of the problem of compatibility with the graphics card or graphics card driver.

  Part of the error message says this;
  + The card does not support 1.1 shaders your graphics card does not support Pixel Shaders or Vertex Shaders. +

  The minimum requirement of the game is a Nvidia GeForce 2 GPU.

  Is that your laptop uses an Intel graphics card and I think that the performance of the GPU it s not good enough to play this game

  But maybe an update of the graphics card driver could help but to be honest I don't see big risks to play this game.

  Good bye

• Re: Satellite A100 cannot find the power management tool in order to use the FN + F2 keys

  I had to recently to wipe my laptop and reinstall everything, all managed to find it of back on my laptop, with the exception of the power management program, the Fn + F2 program.

  I don't remember what her name and I don't know where to get.
  And if there is a CD that came with my laptop, I'm lost.

  Can someone help me please?

  Hello

  There is only one tool of power management. It is called; TOSHIBA Power Saver.
  You can buy it on the European driver Toshiba page!
  Choose the model of laptop just in the form of driver download, download it, unzip the package and install it!

  Concerning

• Cannot delete files from 0 KB Word 2003 "cannot read the source file or disk.

  Original title: how remove the files from Word 2003 0 Kb which can not be read - file cleaner empty and an empty folder solvent do not work - "cannot read the source file or disc!

  I have a number of Word 2003 files that I'm unable to delete, since the message "Source file can not be read"appears when I try to delete.
  I have tried vacuum cleaner and Remover empty folder, also delete - file but cannot delete what cannot be recognized. Can anyone help please? Must be an easy way to do what I forgot, because I can't send files that contain some of these bulk files in my backup hard drive, the process stops when it reaches the 0 kb file!

  Hello

  1. where are the files located?
  2. are you able to open this file?

  This can happen if the file is used by some programs / demand or is corrupt.

  Follow these steps:

  Method 1: Check if you are able to delete the files in safe mode.
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2: Ownership of files and check if you are able to delete.
   http://support.Microsoft.com/kb/308421

• Impossible to remove a file from the desktop, get the error message "cannot read the source file or disk.

  I can't delete a file from my counter top. Error message: cannot read the source file or disk. He is an Adobe file with logo in white box.

  Boot into safe mode and see if it will remove. If this is not the case, try this tool.

  Unlocker File Remover

  Download it from FileHippo
  http://filehippo.com/download_unlocker/

  Download from CNET
  http://download.CNET.com/WOT/3000-2378_4-75011499.html

• Bridge cannot read the format from my new camera RAW

  I just bought a new Sony SLT - A58 but bridge says that it cannot read the RAW format, so, I can't download my pictures.

  I went online and found an Adobe Camera Raw 6.7.1 and DNG Converter 7.4 plugins that supposidely would solve the problem. Nothing helps. Still refuse to recognize the RAW format.

  Desperate as it's my job to camera and and need it up and runing as soon as possible. I have had absolutely no problem with my older Sony A100.

  What's weird is that... If I pass the photos in the converter, it shows me the .dng pictures version, so something is there. Why the bridge can not see my RAW photos? ... and also, leave tons of caches and weird icons in the file, a real mess.

  I'm on Mac OS 10.6.8 platform (Snow Leopard) and using CS5... and Yes, all my programs and software are up-to-date.

  Thank you for your help...

  ... and happy new year

  So if the RAW support is specific, why do a plugin for CS5 and for my camera?

  Adobe has released versions of Adobe Camera Raw (ACR) immediately to ACR 1.0 (which was compatible with Photoshop 7). However, cameras supported varies according to the version of ACR and the version of the Adobe application.

  You must match:

  • your camera brand and model
  • the version of Camera Raw that takes in charge your camera brand and model
  • the specific version of Adobe software that supports the version of Camera Raw that you need.

  In your case, the Sony SLT - A58 was first based ACR 7.4 - which is only supported in CS6 and later versions. CS5 is not compatible with ACR7.4.

  Full list of supported devices is here

  http://helpx.Adobe.com/Creative-Suite/KB/camera-raw-plug-supported-cameras.html

  Applications of camera Raw compatible Adobe are listed here

  http://helpx.Adobe.com/x-productkb/global/camera-raw-compatible-applications.html

  CS5 is certainly not an antique and the A58 Sony isn't a huge technology Hasselblad. I have friends who have a large Nikon and Sony A77 and Canon and import their FIRST in their Bridge CS5.

  All that matters is that the specific camera corresponds with what version of ACR - and what applications are Adobe are compatible with this version of ACR.

  Can't comment on great Nikon or Canon mentioned above without specific camera model numbers.

  However, the Sony A77 is supported by ACR6.5 which is compatible with Bridge CS5 +. Easy to see why this combination works.

  Similarly, your Sony A100 was first supported by ACR 3.5, which is compatible with Bridge CS2 +. Easy to see why it works.

  Always read the tables linked above Adobe and cross with each other. That should clear up your confusion.

• iTunes cannot read the contents of the iPod

  On a model MC540LL/A iPod running iOS 6.1.6 I get this alert:

  iTunes cannot read the contents of the iPod "IPod of Carl Carlson". Go to the summary in the iPod preferences tab and click on restore to restore the iPod to factory settings.

  There is no summary tab or the restoration.

  I have

  Restore all settings

  Erase content and settings

  along with several others that appear irrelevant.

  Which is appropriate?

  Thank you

  Connect your iPod to your computer and restore via iTunes

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  You can then restore the backup:

  To restore backup see:

  Restore your device from an iCloud or iTunes backup - Apple Support

  https://support.Apple.com/en-us/HT204184

  If you restore from a backup of iCloud apps will be automatically downloaded. If you restore from backup iTunes, applications and music must be in iTunes since synchronized as music media library and apps are not included in the backup of the iOS device what iTunes does.

  You can re-download most of iTunes purchases by:

  Download after purchase from the App Store and iTunes Store iBookstore

  https://support.Apple.com/en-us/HT201272

• Satellite A20 cannot read SD memory card

  I have a portable Satellite A20. I can read SD cards up to 1 GB. I tried to read a card with 2 GB (and format). It does not work. Who can help me solve this problem? Thanks in advance.

  Post edited by: Rg1957

  Hello

  When the A20 was produced right now on the market, there is no SD card with more than 1 GB of capacity. Much more old models of portable computers cannot read the new SD cards. It is the same on my old Tecra M1.

  I'm afraid there is not much to do.

• cannot read the source file or disc for install.wim when file copying.

  I'm doing a windows 7 bootable from a USB key, and when copying files every thing goes more except for the install.wim

  I get the error message "cannot read the source file or disk.

  I checked there is enough space on the disk, and I also tried copying from disk to my office, same question.

  I tried using the command line to move the file and get an "Access denied" error message, which I believe is the root cause as to why I can't move the file in the first place.

  Hello

  try to run the System File Checker.

  Here is the link:

  http://support.Microsoft.com/kb/929833

  It will be useful.

• Windows cannot read the disk in drive c.

  I recently bought 5 blank DVDs to burn files, but when I put the disk, it showed no AutoPlay, even if I check suggestions asking me every time, but when I double click on the CD player, it says this message, "Windows cannot read the disk in drive c." can someone help me with this problem?

  Not all DVDs are the same, there are many different types and some DVD players may require a particular type

  If the DVD is blank has nothing to read, that it is not formatted/prepared

  With a dvd in the drive, in Solution Explorer, select a file, rt-click and select send to DVD, it works

• Get an error 'he cannot read the file' in Windows media player after the recent bios update

  * Original title: windows media player cannot play the files after the recent bios update

  I installed the latest update of the bios on my Hewlett Packard Windows 7 and now windows media player comes up with an error message saying that it cannot read the file for each file that he used to play.  Is it possible to uninstall and reinstall windows media player separately from windows?  or y at - it a file update or repair that I can download to make it work again.  I don't get a codec error.

  Hello

  1. What is the full error message?

  2. What is the number of KB of the update of the Bios?

  Please follow the steps below and get back to us with the results.

  Method 1: Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/is-is/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: Uninstall and reinstall Windows Media Player.

  Step 1: Uninstall Windows Media Player.

  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find multimedia and uncheck the brand in the face of Windows Media Player.
  d. restart the computer

  Step 2: Reinstall Windows Media Player.

  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find the multimedia functions and place a check mark in front of Windows Media Player.
  d. restart the computer and check with the question.

  Turn on or off Windows features

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  I would say that you can download the last packs of codec for Windows Media Player to the Internet and check out them. Make a search using your favorite search engine.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Let us know if it helps!

• Error - Windows cannot read the disk in drive F:\-Assurez-vous that the disc uses a format Windows recognizes. If the drive is not formatted, you must format it before you use it

  Original title - Windows cannot read blank disc

  When I insert a blank DVD-R disc for burning, an error is indicated - "Windows cannot read the disk in drive F:\-Assurez-vous that the disc uses a format Windows recognizes." If the drive is not formatted, you must format it before you use it. "So I can't burn a DVD-R disc... But if I use the DVD-RW drive, it can be burned smoothly without any problems... Windows cannot recognize only the DVD-R disc... My DVD - RW driver is Sony Optiarc AD - 7280S. When I use Windows 7 without problem was found in the burning a DVD-R disc. But after using Windows 8, I can't burn a DVD-R disc. So please help me...

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you have a problem with the disc.

  As you mentioned that you have tried the steps of troubleshooting mentioned in this thread.

  I suggest you run the Fix-it tool and check if it helps.

  This tool diagnosis and repair CD or DVD drive issues, when you can not burn or play CD or DVD discs when a disc is not found, not available or not connected.

  See the link below.
  https://support.Microsoft.com/en-us/mats/cd_dvd_drive_problems?WA=wsignin1.0

  As we have tried most of the troubleshooting steps to resolve this problem, and if the problem persists after you run the tool fix - it also. So, I suggest to get in contact with equipment manufacturers , because they will be the best person to help you.

  Hope this information helps. Please let us know if you need additional assistance. We will be happy to help you.

• ORA-19846: cannot read the header of the data file of the remote site 21

  Hello

  I have a situation or I can say a scenario. It is purely for testing base. Database is on 12.1.0.1 on a Linux box using ASM (OMF).

  Standby is created on another machine with the same platform and who also uses ASM (OMF) and is in phase with the primary. Now, suppose I have create a PDB file on the primary of the SEED and it is created successfully.

  After that is a couple of log, do it again passes to the waiting, but MRP fails because of naming conventions. Agree with that! Now, on the primary, I remove the newly created PDB (coward the PDB newly created). Once again a couple of switches of newspapers which is passed on to the wait. Of course, the wait is always out of sync.

  Now, how to get back my watch in sync with the primary? I can't roll method until the required data (new PDB) file does not exist on the main site as well. I get the following error:

  RMAN > recover database service prim noredo using backupset compressed;

  To go back to November 8, 15

  using the control file of the target instead of recovery catalog database

  allocated channel: ORA_DISK_1

  channel ORA_DISK_1: SID = 70 = device = DISK stby type instance

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of the command recover at the 18:55:32 08/11/2015

  ORA-19846: cannot read the header of the data file of the remote site 21

  The clues on how to I go ahead? Of course, recreating the eve is an option as its only based on test, but I don't want recreation.

  Thank you.

  I tried like below:

  1 a incremental backup of the primary of the CNS where off the eve also taken primary backup controlfile as Eve format.

  2 copy the backup of the watch parts, catalogged them on the day before.

  3 recovered Eve with noredo option - it fails here with the same error pointing to the 21 data file.

  OK, understood. Try not to get back the day before first, rather than restore the controlfile and then perform the restoration.

  Make it like:

  1. take incremental backup of primary SNA, also ensures the backup controlfile format.

  2. copy pending, get the location of the data file (names) by querying v$ datafile on the eve. Restore the controlfile ensures from the backup controlfile you took on primary and mount.

  3. Since you are using OMF, the path of primary and standby data file will be different. (/). If you require catalog data from the database files pending.

  (Reason: you restore controlfile from elementary to step 2, which takes place from the main access road). Use the details that you obtained in step 2 and catalog them.

  4. turn the database copy by RMAN. (RMAN > switch database to copy ;))

  5 Catalog backup items that you copied in step 2.

  6. recover the standby database using 'noredo' option.

  7. finally start the MRP. This should solve your problem.

  The reason I say this works is because here, you restore the controlfile to primary first, which will not have details 21, datafile, and then you are recovering. So it must succeed.

  In the previous method, you tried to first collect all the day before, and then restore the controlfile. While remedial classes, always watch seeks datafile 21 as he controlfile is not yet updated.

  HTH

  -Jonathan Rolland